TWEETER INSTALLATION:
The dome tweeters supplied with your
XR653-CS system have been designed for
maximum mounting versatility. There are two
primary methods by which the tweeters can be
mounted into your vehicle:
1) Flush Mounted, using the supplied flush-
mount cup and hardware.This application will yield
a custom-installed appearance, but will require at
least 3/4” (19 mm) of clearance behind the
mounting surface of the tweeter.
2) Surface Mounted, using the supplied surface
mount kit and hardware. In this application, you will
not need to cut holes in your vehicle’s panels for
the tweeters.You will only need to drill a hole for
the wires and for the two mounting screws.This
application is useful when mounting the tweeters to
a panel that has insufficient clearance behind it for
the tweeter’s magnet structure.
Run speaker wires from the tweeter output of
the crossover to the desired tweeter mounting
locations, observing the same precautions as
mentioned in the woofer installation section.
Terminate the wires with the supplied 2.8 mm male
crimpable connectors.
8 JL AUDIO XR653-CS
