GENERAL INFORMATION ON RECORDING
Recording is permissable in so far as copyright or other rights of third parties are not infringed.•
ThisdeckisnotsuitableforrecordingonCHROME(IECII)orMETAL(IECIV)typecassettes.For•
recording,useNORMAL(IECI)typecassettesonwhichthetabshavenotbeenbroken.Thebest
recording level is set automatically. Altering the VOLUME will not affect the recording in progress.
At the very beginning and end of the tape, no recording will take place during the 7 seconds, when •
the leader tape passes the recorder heads.
To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. •
Recording on this side is no longer possible. To record over this side again, cover the tab hole with
a piece of adhesive tape.
TAPEDECK MAINTENANCE
To ensure quality recording and playback of the tape deck, clean parts [A], [B] and [C] after approx. 50
hours of operation or on average once a month. Use a cotton bud slightly moistened with alcohol or a
special cleaning fluid.
Open the cassette door by pressing 1. STOP/EJECT.
Press 2. PLAY and clean the rubber pressure roller [C]
Press 3. PAUSE and clean the magnetic heads [A] and the
capstan [A] with a cotton bud that is moistened with pure
alcohol(Isopropylalcohol).
After cleaning, press 4. STOP/EJECT and close the cassette
door.
Wait until the cleaned parts are completely dry before inserting a tape again.5.
NOTE: Cleaning of the heads can also be done by using a special head cleaning cassette.
CASSETTE OPERATION
