793352
10
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
1918
The 1501AL-1 employs a pure pulp straight sided cone body
attached to an outer suspension made of special foamed rubber.
This suspension material has the longevity and frequency-response
characteristics of traditional rubber surrounds, but with a low density
very close to that of foam surrounds. This material was chosen to
preserve the transient detail of musical signals while still providing
the movement required for high output at low frequencies. Unlike
traditional foam surrounds, the foamed rubber has a very long
service life and will not deteriorate. The cone consists of a special
layered paper-pulp matrix with proprietary Aquaplas damping,
which offers more pistonic behavior throughout the woofer’s
operating bandwidth, and controlled cone breakup beyond it.
The 1501AL-2 uses an “accordion pleated” high strength Poly-
Cotton cloth outer suspension. This material is then coated with a
sealing/damping compound to render it air-tight and provide the
appropriate amount of damping control. This surround is attached
to a composite cone body consisting of an inner and outer layer of
pure pulp stock with an inner foam injection core. This sandwich
construction creates an incredibly stiff, but still relatively light cone
body with extremely good distortion characteristics.
Both woofers employ dual inverted Nomex® spiders for the
cancellation of even-order distortion components. The design
and material of these spiders have been further optimized for the
DD65000 and DD67000 systems to offer even greater freedom
of motion and dynamic range, specically at low playback levels.
All suspension elements are tailored for maximum mechanical
displacement linearity.
All together, these design factors provide reduced harmonic
distortions at very low and very high acoustic output, improved
power handling, reduced power compression, and more
consistent spectral balance with varying input drive level.
476Mg, 476Be HIGH-FREQUENCY
COMPRESSION DRIVER
The 476 family of high-frequency compression drivers make
use of a 4-inch (100mm)-diameter formed diaphragm with a
4-inch (100mm) aluminum edge-wound voice coil, operating into
JBLs existing rapid-are-type, coherent-wave phasing plug. The
476Mg (DD65000) has a 95% pure magnesium alloy diaphragm.
The 476Be (DD67000) has a 98% pure beryllium diaphragm.
The use of an efcient neodymium rare-earth motor structure
with a new copper-sleeved polepiece maintains maximum gap
ux and reduced coil inductance at a minimal size and weight.
The combination of these features has resulted in drivers that can
deliver superior sound quality with very little distortion and power
compression, regardless of acoustic power output.
A high-purity copper sleeve is used for the polepiece. This greatly
improves the electrical conductivity of the polepiece for lower coil
inductance and thus greater high-frequency output at 15kHz and
above. The copper-sleeved pole piece quickly wicks away heat
generated by the voice coil, thereby contributing to a reduction
in dynamic power compression. To compensate for the higher
resistance caused by the use of the copper-sleeved polepiece, a
new magnet with special high-grade and high-temperature-grade
neodymium has been used.
The phasing plug is of JBLs traditional rapid-are, coherent-wave
four-slot design. This coherent-wave design shapes the wave
output, producing a truly coincident wave front as the sound
enters the Bi-Radial horn.
The diaphragm is formed of very high purity magnesium alloy
foil (476Mg, DD65000) or pure beryllium foil (476Be, DD67000)
that is manufactured with a proprietary high-temperature and
pressure-forming process. This process enables the integrated
JBL diamond-pattern surround to be formed as one piece with the
dome. Compared to other methods, forming the diaphragms out
of sheets of magnesium or beryllium foil yields greater reliability and
resistance to failure due to fatigue. If breakage ever does occur, the
diaphragm does not shatter into pieces or harmful dust. Beryllium
has a very high stiffness-to-density ratio of about ve times that
of aluminum, magnesium, titanium or iron. This maintains pistonic
behavior up to 20,000Hz, eliminating diaphragm modal breakup
and keeping the upper frequency response very smooth, with
minimal distortion spikes. Compared to the 475Nd compression
driver used in JBLs original K2 S9500 system, this is about a 45
percent reduction in moving mass. With such a low mass, the
moving assembly is able to respond even more quickly to musical
transients, further enhancing the reproduction of musical detail
and microdynamic nuances.
Like the beryllium diaphragm in the 476Be, a proprietary thermal
forming process is used to form thin magnesium alloy sheets into
a 100mm magnesium dome shape of exacting dimensions for
the 476Mg. This includes the integrated JBL diamond surround.
The 95% pure magnesium alloy diaphragm of the 476Mg also
uses small percentages of aluminum, zinc, and other alloys to
improve characteristics such as diaphragm forming, fatigue
strength, corrosive and acoustic properties. Magnesium has very
low density, slightly lower than even beryllium, but with much lower
stiffness. However, with such a low density the thickness of the
magnesium alloy diaphragm can be increased to 130 microns,
greatly improving its stiffness. In fact, when compared to the
titanium diaphragms used in JBLs original K2 S9500 and M9500
systems, this new magnesium alloy diaphragm is 2.5 times thicker
but maintains about the same moving mass of 3.4 grams. This is
benecial because with high stiffness, pistonic behavior extends
up to higher frequencies than is possible with current aluminum
or titanium diaphragms. Another benet of the magnesium alloy is
greater internal loss or damping when compared to aluminum or
titanium diaphragms. This greater internal loss quickly minimizes
the amplitude of resonances when the driver is asked to produce
frequencies beyond its acoustic limits.
Die-Cast Aluminum Front Cover
4" Edge-Wound
Aluminum Voice Coil
Copper-Sleeved
Pole Piece
Foam Damping Pad
Diaphragm Assembly
Acoustic Seal
Die-Cast Aluminum Back Cover
5-Way, Gold-Plated Terminals
Coherent-Wave, 4-Slot Phase Plug
Diamond Surround
Neodymium Magnet
Top Plate
476-series Compression Driver Section View
3-Layer Pure Pulp
Sandwich Cone with
Foam Injection Core
Layered Paper-Pulp
Matrix Cone with
Aquaplas Damping
1501AL-1
(DD65000)
1501AL-2
(DD67000)
High-Strength Sealed
Poly-Cotton Cloth
Accordion-Pleated
Suspension
Special Low-Density
Foamed Rubber
Half-Roll
Suspension
1501AL-1/1501AL-2 Cone and Suspension Comparison
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JBL Project Everest DD67000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JBL Project Everest DD67000 in de taal/talen: Engels als bijlage per email.

De handleiding is 17.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info