648486
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
20
20
SET THE CROSSOVER CONTROLS
GX-A604: 4-CHANNEL OPERATION
Input Mode switch: Set the Input Mode switch in the "4CH" position.
Front Crossover Filter switch: Set the Front Crossover Filter switch in the “ON” (high-pass) position. This will limit the amount of low-frequency
energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage. Exception: If you have connected large full-
range speakers (6" x 9" or larger) that can handle significant bass to the amplifier's front channels and you are not using a subwoofer in the system,
set the Front Crossover Filter switch to the "OFF' (full-range) position.
Rear Crossover Filter switch: Set the Rear Crossover Filter switch in the “HP” (high-pass) position. This will limit the amount of low-frequency
energy sent to the speakers, significantly reducing distortion and preventing the speakers from damage. Exception: If you have connected large full-
range speakers (6" x 9" or larger) that can handle significant bass to the amplifier's front channels and you are not using a subwoofer in the system,
set the Rear Crossover Filter switch to the "FLAT' (full-range) position.
Rear Crossover control: When the Rear Crossover switch is set in
the "HP" position, the Rear Crossover control determines the frequency
where the low frequencies sent to the speakers begin to be reduced in
volume.
When running the amplifier in the 4-channel mode you should set the
Rear Crossover control according to the size of the speakers connected
to the amplifier channels – the smaller the speakers the higher you
need to set the control to protect the speakers from damage. After
initially setting the crossover frequency, listen to music with strong bass
that you are familiar with. If the speakers sound distorted or distressed, move the crossover frequency control to a higher setting to eliminate the
distortion/ distress. The illustration to the right shows the recommended crossover filter frequency ranges for different speaker sizes.
GX-A604: 3-CHANNEL OPERATION
Input Mode switch: Set the Input Mode switch in the "4CH" position.
Front Crossover switch: Set the Front Crossover switch in the “ON” (high-pass) position. This will limit the
amount of low-frequency energy sent to the speakers, significantly reducing distortion and preventing the
speakers from damage.
Rear Crossover Filter switch: When connecting a subwoofer or woofer to the rear channels, set the Rear
Crossover Filter switch in the “LP” (low-pass) position. This will limit the amount of high-frequency energy sent
to the woofers or subwoofer, improving the clarity of vocals and other midrange sounds.
6" and 5" Speakers 4" and Smaller Speakers
Low-Pass Operation:
Subwoofers and Woofers
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JBL GX-A3001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JBL GX-A3001 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info