497793
9
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
13/93 CMX24
ShowScene
You can recall a scène in the Chase/Scenes mode. Be sure that:
The Chase/Scenes mode is activated (by using the <MODUS SELECT/REC SPEED> button)
The {Master B} fader is at its lowest position
MIX Chase is activated; select this by using the <PARK> button, just on top of the MASTER B
fader in Chase/Scenes mode. The [MIX CHASE] led is situated above the FADE fader and must
be lit.
The Black-out function is not activated.
All the PRESET faders (A & B) are set at their lowest position.
Move the {PRESET B 1} fader to its highest position. The stored scene will appear on the green Leds (and
on your projectors).
By setting several Preset B faders at the same time on a position that is higher than 0, you can create a
combined scene. You can modify the intensity of the scene by using the Master B fader.
You can quickly set the scenes at 100% by using the Preset B flash buttons. Repeat the procedure to store
scenes in page 2. Be sure that the Preset B faders 1 to 3 of page 2 contain also scenes (make them different
from the other scenes). Check alsothese scenes.
Page to page
Now you have scenes for the preset B faders 1 to 6 from page 1 and the preset B faders 1 to 3 from page 2.
The preset faders 1 to 3 can now show 2 different scenes, depending of the selected page.
Execute the next position:
Move all the {Preset B} faders to the lowest position.
Activate page 1 by using the <PAGINA/RECCLEAR> button
Move {Preset B 1} fader 1 to the highest position. The stored scene is shown.
Activate Page 2 by using the <PAGINA/REC CLEAR> button
The same scene is still shown.
Move the {Preset B 1} fader to the lowest position.
Move the {Preset B 1} fader to the highest position. The scene stored in preset B 1 of page 2 is
shown.
The content of the Preset B fader haschanged. This happened when the fader was in its lowest
position.
Modify a Scene
If you need to have another scene, you can:
Compose a completely new scene and store it
Adapt a scene by modifying the intensity of certain channels
Follow the normal procedure to store a scene. when you have stored the working memory in the Preset B
fader by pressing <RECORD/SHIFT> + <PRESET Bx>, the old scene will be replaced by the new scene.
If only a few channels of a scene need to be adapted, it is easier to recall the scène and to adapt it than to
create a complete new scene. The CMX24 has a special edit mode that allows you to modify the channels of
a scene.
First of all, you need to place the Preset B fader with the stored scene in edit mode:
Be sure that program mode is activated.
Be sure that Chase/Scenes mode is activated.
Bring all the Preset A faders to their lowest position
Select a page by using the <PAGINA/RECCLEAR> button
Place the Preset B fader in edit mode:
o Press and hold the <EDIT/ALL REV> button
o Press and release the <PRESET B x> button. X has to be replaced by 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11 or 12 depending of the preset B fader that you want to edit
o Release the <EDIT/ALL REV> button
o The yellow led on top of the Preset B fader will Lit and the actual scène is shown.
Increase the intensity of channels:
Press and hold the <UP/CHASEREV> button
Press and hold the <PRESET A x> button of the channel where you want to have the intensity
increased
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
14/93 CMX24
Use the <PRESET Bx> button for the channels 13 to 24.
The intensity will slowly increase on you fixtures and on your display
Release the buttons, as soon as you have reached the desired intensity.
Reduce the intensity of channels:
Press and hold the <DOWN/BEAT REV> button
Press and hold the <PRESET A x> button of the channel where you want to have the intensity
reduced
Use the <PRESET Bx> button for the channels 13 to 24.
The intensity will slowly decrease on your fixtures an on your display.
Release the buttons as soon as you have reached the desired intensity.
!! The intensity that you have set will be directly stored, it is not possible to undo the modifications.
To Exit the Edit mode:
Press and hold the <RECORD/SHIFT> button
Press and release the <KILL/REC EXIT> button
Release the <RECORD/SHIFT> button
The normal output isshown.
Store a Chase
A chaseis a succession of scenes that are shown on a certain rhythm.
The controller makes no difference between scenes and chases. A scene is in fact a chase with only 1step.
So you will notice that the method of storing a chase is almost identical to the method of storing a scene.
(At this time, program mode has to be active, if it is not; you will have to do that first)
Be sure that the working memory is emtpy:
Press and hold the <RECORD/SHIFT> button
Press and release the <PAGINA/RECCLEAR> button
Release the <RECORD/SHIFT> the
We are going to make a chase, composed out of 4 scenes. Be sure that you work in program mode and that
your master is not set to 0.
Scene 1
Set the first scene:
Channel 1 = 100%
All the other chanels = 0%
Now store this scene in the working memory:
Press and release the <RECORD/SHIFT> button
[001] appears on the display = first scene
Scene 2
Set the second scene:
Channel 2 = 100%
All the other channels = 0%
Now store this scene in the working memory:
Press and release the <RECORD/SHIFT> button
[002] appears on the display = second scene
Scene 3
Set the third scene:
Channel 3 = 100%
All the other channels = 0%
Now store this scene in the working memory:
Press and release the <RECORD/SHIFT> button
[003] appears on the display = third scene
Scene 4
Set the fourth scene:
Channel 4 = 100%
All the other channels = 0%
Now store this scene in the working memory:
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JB systems CMX-24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JB systems CMX-24 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info