497793
4
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
3/93 CMX24
FUNCTIONS (FRONT)
1. BLACK OUT button: Used to switch between black out (every DMX value at 0) and normal. The led
beside the button blinks when the BLACK OUT function is activated. The DMX values will nevertheless
be shown trough the green leds. (see number30/31)
2. FULL-ON button: As long as this button is pushed in, all channels will have the same maximal intensity,
regardless the working mode and the black out function. The dark button (number 15) has priority above
the full-on button
3. TAP SYNC button: By pressing this button twice you will adjust the chase speed. By moving the
{SPEED} fader, this stored speed will be erased. This doesn’t apply for the preset B faders (number 29)
of which the speed is stored.
4. HOME button: Only useful in Chase/Scenes mode (check the chapter “How to use” for more
information). Using this button you can switch a channel that is set in BLIND mode (see <BLIND>
button) back in normal mode. So you have to press <HOME> + <PRESET A/B x> to switch a preset B
fader back in normal mode.
5. BLIND button: Only useful in Chase/Scenes mode (check the chapter “How to use” for more
information). With this button you can switch a channel in BLIND mode. In this mode, the intensity of the
channel will only be determined by the preset fader (A for the channels 1 to 12, B for the channels 13 to
24) and the master A fader. Chases or scenes that are stored in a preset B fader don’t have an
influence. So, you have to press <BLIND> + <PRESET A/B x> to switch a channel in blind mode.
6. AUDIO button: Using this button you can (de)activate the audio function (LED above the Audio button
is ON/OFF). When the audio function is active, the speed of the passing of scenes of chases will be
determined by an audio signal, acquired by the internal microphone or supplied by the LINE IN
connector (number 5 on the rear side of the CMX24). The {SPEED} fader, <STEP> and <TAP SYNC>
buttons don’t have an influence. You cannot use the audio function for chases of which the speed is
stored in a preset B fader.,
7. STEP button: Using this button, you can view the scenes of chases manually. The {SPEED} fader has
to be set in the lowest position (SHOW MODE) or you have to work in the EDIT mode. This button
doesn’t have and influence on chases of which the speed is stored in a preset B fader.
8. HOLD button: As long as you press this button, the current scene will be maintained. When you release
this button, the new scene will fade in with a time that is set with the FADE fader. With the DARK, FULL-
ON, BLACK OUT, PRESET buttons you can still change the scene.
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
4/93 CMX24
9. PARK button:
Single Preset mode: no function
Double Preset mode: flash button for MASTER B fader ( take the {FADE} fader into account)
Chase/Scene mode: button to choose between Single chase or Mix chase
10. 1-24 Button: Flash button for the MASTER A fader ( take the {FADE} fader into account)
11. RECORD/SHIFT button: Used to program steps or to switch to the program mode. This button has,
when pressed together with the shift button, different functions depending of the combination of buttons:
Examples:
<RECORD/SHIFT>: Store a scène in the working memory.
<RECORD/SHIFT> + <REC EXIT>: For programming or leaving the Edit mode.
<RECORD/SHIFT> + <RECCLEAR>: Erasing the working memory
<RECORD/SHIFT> + <1>, <5>, <6>, <8>: Activate the program mode
<RECORD/SHIFT> + <1>, <3>, <2>, <3>: Erasing thewhole memory can only be done from the
program mode.
<RECORD/SHIFT> + <% or 0-255>: Choosing the display mode (% or DMX-value)
<RECORD/SHIFT> + <5>, <5>, <5>: Choosing the 5 min range for the {SPEED} fader.
<RECORD/SHIFT> + <10>,<10>, <10>: Choosing the 10 min range for the {SPEED} fader.
12. ADD KILL/RECEXIT button:
ADD mode: ([ADD KILL] led OFF) When you press a preset flash button, it will have the maximal
intensity, without taking the {FADE} fader into account.
KILL mode: ([ADD KILL] LED ON)
o Single/Double preset mode: Pressing one or more preset A or B buttons will put these
channels on 100% intensity. The other channels will be put out.
o Chase/Scenes mode: Pressing one or more preset A buttons will put these channels
on 100% intensity. The other channels will be put out. Pressing a preset B button will
put this channels on 100% intensity, without taking the {FADE} fader into account.
This last is in fact the ADD mode.
<RECORD/SHIFT> + <ADD KILL/REC EXIT>: With this combination of buttons you can leave
the program or edit mode.
13. PAGE/REC CLEAR button:
<PAGINA/REC CLEAR>: With this button you can flip trough the 4 pages. The 4 LEDs above
this button show which page is currently active.
<RECORD/SHIFT> +<PAGINA/REC CLEAR>: Used to clear the working memory.
14. MODE SELECT/REC SPEED button:
MODE SELECT: With this button you can choose between Chase/Scenes, Single preset and
Double preset mode.
REC SPEED: (in MIX mode!) In combination with a preset B fader, this button also allows you to
store the speed of a chase in a preset B fader in Chase/Scenes mode.
o Set the chase on the wanted speed with the {SPEED} fader or the <TAP SYNC>
button. Place the {SPEED} fader in the lowest position (SHOW MODE) to erase the
speed.
o Press <MODUS SELECT/REC SPEED> + <PRESET B x> to store the speed.
15. DARK button: As long as this button is pressed all the channels will be set at zero, regardless the
mode, the black out, and the full-on function.
16. EDIT/ALL REV button:
Edit: used to switch to the edit mode:<EDIT/ALL REV> + <PRESET B x>
ALL REV: Used to change the direction of all chases
17. INSERT/% or 0-255 button:
INSERT: Used to add a scene to a chase (for more info, see “editing a Chase”)
% or 0-255: Changing the display mode (switching between % and DMX-values)
18. DELETE/REV ONE button:
DELETE: used to delete a scene in a chase for more info, see “editing a Chase” and “deleting
scenes”)
REV ONE: Changing the direction of one chase: <DELETE/REV ONE> + <PRESET B x>
19. UP/ CHASEREV button:
UP: Increasing the level of a channel in edit mode: <UP/CHASE REV> + <PRESET A/B x>
CHASE REV: used to change the direction of all the chases of which the speed isn’t stored in a
preset B fader.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JB systems CMX-24 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JB systems CMX-24 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info