604532
29
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
iFP-700 Series
www.iRiver.com
Hardware Instruction Manual
Thank you for your purchase.
Please read this manual carefully
before using your new player.
www.iRiver.com
Digital Audio player/
Recorder/FM Tuner
Model iFP-700 Series
GETTING STARTED
LOCATING THE CONTROLS
PC SOFTWARE INSTALLATION
BASIC OPERATION
CONVENIENT FUNCTIONS
ADDITIONAL INFORMATION
1
2
3
4
5
6
Contents
THIS MANUAL COVERS THE INSTALLATION AND USE OF
THE PLAYER HARDWARE. FOR DETAILS REGARDING THE
SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC
TO THE PLAYER, PLEASE SEE THE SOFTWARE
INSTRUCTION MANUAL.
NOTE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Note : This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
FCC Certification
GETTING STARTED
CONTENTS
1
INTERNET
FEATURES
ABOUT POWER SUPPLY
1-1
1-2
1-3
Getting started...
THIS MANUAL COVERS THE INSTALLATION AND USE OF
THE PLAYER HARDWARE. FOR DETAILS REGARDING THE
SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC
TO THE PLAYER, PLEASE SEE THE SOFTWARE
INSTRUCTION MANUAL.
NOTE
Getting started...
1-2
Getting started...
1-1
URL : www.iRiver.com
Find information on our company, products, and customer and technical
support.
Update your player with firmware downloads. Firmware upgrades offer
support for new CODECS and deliver new product features.
Consult the product FAQ.
Register your iRiver product online so that our Customer Service is able to
provide support as efficiently as possible.
All contents contained in this manual subject to change without notice to
improve ability of this player or according to changing of specification.
iRiver Limited does not assume any responsibility for errors or omissions in
this document or make any commitment to update the information contained
herein.
iRiver is a registered trademark of iRiver Limited in the Republic of Korea and
/or other countries and is used under license. Microsoft Windows Media and the
Windows Logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and /or other countries.
All other brand and product names are trademarks of their respective
companies or organization. All other product names may be trademarks of the
companies with which they are associated.
1999-2004 iRiver Limited. All rights reserved.
INTERNET
Multi-Codec Player
Supports MP3, WMA, OGG and ASF formats.
Firmware Upgrade
Provides the latest updated features via firmware upgrade.
Graphic LCD supporting Multiple Languages
iFP-700 Series comes with graphic LCD which can support multiple languages (40
languages).
FM Function
You can easily listen to FM stations and set your favorite stations by using Auto Preset and
Frequency Memory functions.
6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal
Xtreme EQ and Xtreme 3D
Customize your own EQ with Xtreme EQ and enhance bass and surround sound with
Xtreme 3D.
GUI (Graphic User Interface) Menu System
Simple Navigation
Simple navigation makes it easy to find any song.
Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time.
Create your own playlists.
Direct Encoding
11.025KHz ~44.1KHz, 8Kbps ~ 320Kbps
Record FM Radio, Voice, or line-in from another device
Voice record level is automatically controlled by AGC function.
Convenient neck strap.
Supports USB 2.0 (iFP-780 Supports USB 1.1 only)
FEATURES
Open the battery cover.
Close the battery cover.
Insert the battery. (AA
1.5V type x 1ea)
Be sure to match the + and -
ends of the battery with the
diagram inside the battery
compartment.
ABOUT POWER SUPPLY
Inserting a battery
Getting started...
1-3
If the battery is worn out, “Low
Battery” is displayed on the LCD.
Insert a fresh battery.
To avoid corrosion, remove the
battery if the player is not to be used
for a long time.
Remove dead battery immediately to
avoid damage from corrosion.
When corrosion occurs, wipe the
battery compartment immediately with
a dry cloth and insert a new battery.
NOTE
Locating the Controls
Locating the Controls
Contents
2
Front View
Side View
LCD Screen
2-1
2-2
2-3
THIS MANUAL COVERS THE INSTALLATION AND USE OF
THE PLAYER HARDWARE. FOR DETAILS REGARDING THE
SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC
TO THE PLAYER, PLEASE SEE THE SOFTWARE
INSTRUCTION MANUAL.
NOTE
Locating the Controls
2-2
Locating the Controls
2-1
Locating the Controls
Side View
Locating the Controls
Front View
MIC
LCD Screen
Volume +
Volume -
(Previous Track/Fast Reverse)
(Next Track/Fast Forward)
NAVI/MENU
STEREO
Power ON/OFF
/ (Play/Stop)
MEMORY/EQ
A-B (Interval repeat)
MODE/REC
USB
Connection
Port
HOLD
LINE IN
Battery
Earphones
ASF WMA
OGG MP3
FILE FORMAT
2-3
SONG
NUMBER
BIT RATE
PLAY
TIME
PLAYBACK MODE
BATTERY INDICATOR
VOLUME
EQUALIZER
VISUALIZATION
FOLDER NAME
SAMPLE RATE
PROGRAM
ARTIST/TITLE NAME
HOLD
Locating the Controls
LCD Screen
IRM (iRiver Rights Management)
iRiver Rights Management is a digital music format.
Please visit our web site for details about this music format.
IRM
Locating the Controls
PC software installation
Attach the player
Detach the player
3-1
3-4
3-7
PC software installation
3
Contents
THIS MANUAL COVERS THE INSTALLATION AND USE OF
THE PLAYER HARDWARE. FOR DETAILS REGARDING THE
SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC
TO THE PLAYER, PLEASE SEE THE SOFTWARE
INSTRUCTION MANUAL.
NOTE
THIS SECTION COVERS THE INSTALLATION FOR WINDOWS
OPERATING SYSTEMS ONLY. FOR INSTALLATION
INSTRUCTIONS FOR MAC OS, PLEASE SEE THE SOFTWARE
INSTRUCTION MANUAL.
NOTE
PC software installation
3-2
PC software installation
3-1
PC software installation
Software installation
System Requirements (Windows)
Pentium133MHzorfaster
USB port
Window 98SE / ME / 2000 / XP
CD-ROM drive
10MB free hard disk space
Note
The player can store MP3 files or files of any type.
You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver
Music Manager Program.
Download latest versions of drivers and iRiver Music Manager at www.iRiver.com
Insert the Installation CD into the CD-ROM drive.
The following screen appears after inserting the CD.
If the installation doesn't automatically begin,
execute the "setup.exe" file in the installation
CD. The installation program will begin.
The installation CD contains the following
contents :
- Device Driver
- iRiver Music Manager
- Manager Program for Mac
Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP.
Please complete the steps in this section BEFORE ATTACHING YOUR
PLAYER TO YOUR PC.
IMPORTANT
PC software installation
Software installation
Click “Next” to Install iRiver Music
Manager.
Select the folder to Install.
Click “Next”.
3
3
4
4
Please note that the installation screens may differ slightly from those appearing
here, as software may be of a more recent version. If your screens differ, please
visit www.iRiver.com/software for an updated user guide.
Note
Insert the Installation CD into the CD-ROM
drive. Installation starts automatically.
2
2
1
1
Click “Next” after selecting the language to
install.
3-4
3-3
PC software installation
PC software installation
PC software installation
Software installation
Click “Install” to begin the installation.
5
5
6
6
7
7
Click “Next” after confirming the
installation folder.
Installation is in progressing.
Click “Finish” after the installation is completed.
Attach the player
Connecting to the PC
Connect the USB cable (provided) to the USB port of your computer.
Type “A”
Type “B”
USBportonthePC
USB port on the player
USB cable
Type “A”
Type “B”
Turn on the player by pressing the button
marked STEREO. Lift the protective cover
over the USB port and connect the USB
cable to the player.
“USB CONNECTED” will appear on the
LCD screen of the player.
1
1
2
2
Connect the USB cable to the PC after playback stops to avoid errors.
iFP-780 supports USB 1.1 (Full speed) and iFP-790/ 795/ 799 supports USB 2.0
(High speed) version.
Note
3
3
3-6
3-5
PC software installation
PC software installation
Attach the player
Installation of New Hardware
Select “Install the software automatically
(Recommended)” and click “Next”.
If a "Hardware Installation" warning
message appears, click "Continue
Anyway". (Windows XP)
The iRiver software driver will not cause
any damage to your computer.
1
1
3
3
4
4
After installing iRiver Music Manager from
the CD and connecting the player to your
PC, "Found New Hardware" screen is
displayed.
2
2
The computer will automatically search to
find your new hardware.
Attach the player
Installation of New Hardware
Information screen is displayed on the PC. New hardware is installed successfully
and ready to use.
5
5
7
7
The installation will continue.
Click “Finish”
Completed the installation of “New
hardware”.
6
6
Windows 98SE, Windows ME, Windows 2000 O.S do not need any other device
driver installation.
Install New Hardware after installing iRiver Music Manager program.
Note
3-7
Basic Operation
Contents
4
Listening to Music
Basic Operation
Operating the FM Tuner
Recording
4-1
4-3
4-7
4-11
Basic Operation
PC software installation
Detach the player
Safely Removing the player from the PC
Click the “OK” after confirming the
hardware to remove.
Click the “Close” after confirming the
Safely Remove Hardware message.
(In case of Windows XP)
1
1
3
3
4
4
Select the “Safely Remove hardware”
after clicking the “Safe To Remove
Hardware” by using the right button of
mouse.
2
2
Click the “Stop” after selecting the device
to remove.
If the player is disconnected inacculately,
it may cause a malfunction or damages
to the player.
To turn on the player
To play
To change modes
(MP3
FM
Voice recording LINE IN)
To stop
To advance
To reverse
To play the next folder
To play the previous folder
To fast forward
To fast reverse
To turn off the player
Listening to Music
4-2
Click
4-1
Listening to Music
Click
Long Click
Click
Push
Click
Push
Long Push
Long Push
Long Push
Long Click
Push
Push
LISTENING TO MUSIC
Put the HOLD switch to “OFF”.
Connect the earphones as shown below.
PressthePLAY/STOPbuttontoturnon
the player. Press it again to play.
To select song
To select previous song
To select next song
To adjust the volume
+:
To increase volume
-:
To decrease volume
- When "Hold" is ON, the buttons on the
player will not function.
- When stopped or in recording standby
mode, the player automatically turns off
according to the setting of “STOP
POWER OFF” on the MENU.(Refer to
page 5-17)
OFF
NOTE
Basic Operation
Basic Operation
Click
Long Click
to increase
to decrease
Press + on volume button to increase
volumeandpress–onVolumebutton
to decrease volume.
Press the STEREO button to select
STEREO or MONO.
Press and hold the MODE button to display the current function. Push the
NAVI/MENU button toward
or to select the desired function, then click the
NAVI/MENU button to enter that mode.
(Refer to page 4-8)
P
u
sh
Click
MP3 Playback FM Receiving Voice Recording LINE IN Recording
4-4
MP3
FM
RADIO
VOICE
LINE
IN
F
M
Long Click
FM
RADIO
F
M
VOICE
LINE
IN
Basic Operation
Basic Operation
1. LCD window : Displays the operating status of the player.
2. To skip to previous track or previous FM station.
3. To increase volume.
4. To skip forward to the next song or FM station.
5. To select NAVI/MENU function.
6. To decrease volume.
7.
To Play or Stop playback, to select FM mode, or to turn on/ off.
8.
To select EQ mode, A-B repeat, or automatically store FM stations.
EQ : NORMAL
ROCK JAZZ CLASSIC U BASS METAL Xtrm EQ
Xtrm 3D
9.
To select function, playback mode, or record/stop recording.
Navigation Menu
4-3
Basic Operation
Selecting FM Tuner Mode adjusting the volume
Changing Functions
Basic Operation
Basic Operation
A long press of
the
NAVI/MENU button will enter
the
menu system.
Scroll between menus : Push or (VOL+orVOL-).
Exit : Click the PLAY/STOP button (or long pressing of
NAVI/MENU button).
Select Function: Press the NAVI/MENU button.
During MP3 playback, you can select the playback mode by turns by clicking the
MODE/REC button.
MODE
MENU
Repeat Playback
Shuffle Playback
Intro Playback
4-6
Basic Operation
4-5
Click
Press and hold the MODE/REC button : You can select MP3 or FM, Voice or Line-in
recording functions. (Play mode is automatically activated when MP3 is selected).
NAVIGATION
Press NAVI/MENU buttonandfindthedesiredtrackbypushingtheVOL+orVOL–
button. To select the track, press the NAVI/MENU button,
or the button.
To move to the upper folder, push the
switch.
If there is no upper folder, NAVIGATION stops.
Basic Operation
FILE DELETE
FOLDER DELETE
1
1
2
2
3
3
4
4
1
1
2
2
3
3
4
4
DELETING FILES ON THE PLAYER
Stop playback.
Press the
“NAVI/MENU”
button.
Selectthefiletodeleteby
using VOL
or VOL .
Click the “MODE” button.
“FILE DELETE ARE YOU SURE?” is displayed on the
screen.
Select “YES” by using
or (VOL + or VOL -)
to
delete. Then click NAVI/MENU button.
Stop playback.
Select the folder to delete.
Click the “MODE” button.
“FOLDER DELETE ARE YOU SURE?” is displayed on
the screen.
Select “YES” by using
and (VOL + or VOL -)
to
delete. Then press NAVI/MENU button.
You can only delete an empty folder.
Press the
“NAVI/MENU” button.
DELETING FOLDERS ON THE PLAYER
NOTE
Basic Operation
Basic Operation
4-7
4-8
1
1
2
2
3
3
Long Click
MP3
FM
RADIO
VOICE
LINE
IN
F
M
P
u
s
h
Click
VOICE
LINE
IN
MP3
FM
RADIO
F
M
P
u
s
h
or
(Ex : 87.5 87.6)
Click
L
o
n
g
P
u
s
h
or
(Ex : 89.1 91.9 93.1)
Operating the FM Tuner
OPERATING THE FM TUNER
To switch to the FM Tuner, press and hold the MODE/REC button.
The current function is displayed.
Push the
,
switch to select FM RADIO. Press the NAVI/MENU button to
confirm.
Push the NAVI/MENU switch toward or to select your desired station.
The function selection graphic displays on the LCD.
To automatically locate a station press and hold NAVI/MENU button to the right or left.
The player will quickly scan through each frequency and stop at the next station that can tuned in.
Operating the FM Tuner
To select STEREO/MONO
To select a station saved in memory, press the NAVI/MENU button to enter PRESET
mode then find a saved station by pushing the
or switch to the left or the right.
Auto Scan function
PRESET Mode
Press the STEREO/PLAY/STOP button to select Stereo/Mono.
Basic Operation
Basic Operation
4-9
1
1
2
2
3
3
Click
Click
Long Click
C
l
i
c
k
4-10
1
1
2
2
Long Click
Long Click
Press and hold the A/B MEMORY button to
automatically select select stations and save them
in sequential order.
(Only activates while the player is not in PRESET mode)
Push
or
and select the
desired station.
Select CH02
again
Select a station by pushing the
or
switch to the left or the right.
Up to 20 stations can be saved.
Auto memory function
Auto memory may not work within weak transmission areas.
will exit the memory
function without saving.
To cancel Saving
Save complete
Operating the FM Tuner
Memory Function (Save stations)
Select the station to be deleted at
PRESET mode
FM Tuner reception may vary in different areas.
While in PRESET mode, auto scan and auto memory functions are not available.
When the player doesn’t have any preset stations, EMPTY will be displayed at
PRESET mode then faded out.
Press and hold the PLAY/STOP button to turn the player off.
Operating the FM Tuner
Memory delete function (Delete saved stations)
- The next station will appear when station delete is completed.
Push the MEMORY button if you also want to delete the next station.
Press and hold the MEMORY
button.
To turn the player off
NOTE
Basic Operation
Basic Operation
Click
Click
4-12
4-11
1
1
2
2
3
3
4
4
Long Click
P
u
s
h
Click
Click
Click
MP3
FM
RADIO
VOICE
LINE
IN
F
M
VOICE
LINE
IN
MP3
FM
RADIO
F
M
MONO 32KHz 32KBPS
Press the MODE/REC button
during FM reception. The
station will be recorded, the
remaining recording time will be
displayed on the LCD screen.
Press the MODE/REC button again to stop recording.
The recorded file is saved as TUNER000.REC. It is saved in the RECORD folder.
Press PLAY/STOP button to pause the
recording process. Press PLAY/STOP button
again to restart recording.
To stop FM recording
To record FM To pause FM recording
To play a recorded file
After selecting MP3 mode, select the recorded file to listen and press the PLAY/STOP button to play.
Recording-FM Tuner
Volume can not be controlled while recording.
Recorded REC files can be converted to MP3 files using iRiver Manager.
(Refer to page iRiver Music Manager Software Instruction Manual 32~34/37~39)
NOTE
Press and hold the MODE/REC button.
Press the NAVI/MENU button (or
PLAY/STOP) to go to Voice recording
mode. (The recorder will be in standby
mode.)
Press the MODE/REC button again to
begin recording.
Press the
or (VOL + or
VOL -)
switch to select Voice mode.
or
Recording-Voice
Recording Voice
Basic Operation
Basic Operation
Click
Click
MONO 32KHz 32KBPS
4-14
4-13
LINEIN RECORDING MODE
MONO STEREO
44.1KHz
128KBPS
1
1
2
2
3
3
Long Click
MP3
FM
RADIO
VOICE
LINE
IN
F
M
- Select Line-In mode on the menu to use the external microphone.
The recorded file is saved as VOICE000.REC in the VOICE folder.
If “00:00:00” is displayed on the LCD, the player’s memory is full. To record, delete files
and/or folders on the player to make some space available.
(To delete : Refer to page 4-6,
iRiver Music Manager
)
The player can not record when the memory is full or the battery is low.
Keep the player far away enough from the source to avoid distortion in the recording.
Recorded REC files can be converted to MP3 files using iRiver Manager.
(Refer to page iRiver Music Manager Software Instruction Manual 4-32~4-34)
Press the MODE/REC button.
Press the PLAY/STOP button.
Press button during recording.
Press button again to restart recording.
To stop recording
To play a recorded file
To pause voice recording
Recording-Voice
NOTE
Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player.
Press and hold the MODE/REC button.
Set “LINE IN RECORDING MODE” in
the MENU.(Refer to page 5-22 for
details)
Recording-External audio source
Recording from an external audio source
NOTE
After stopping a recording, starting
again will create a new voice file.
NOTE
Pausing the recording will not create a new file,
recording will be added to the current recording.
NOTE
Basic Operation
Basic Operation
5
5
6
6
4
4
Click
Click
Click
P
u
s
h
STEREO 44.1KHz 128KBPS
AUDIO001
VOICE
LINE
IN
MP3
FM
RADIO
F
M
4-16
4-15
STEREO 44.1KHz 128KBPS
Click
1
1
2
2
Click
Click
Click
Press the MODE/REC button and
LINE-IN recording is started.
Press the
or (VOL + or VOL -)
switch to select the LINE-IN mode.
Press the NAVI/MENU button (or
PLAY/STOP) to go to LINE-IN
recording mode.
(Record Standby
Mode)
Recording-external audio source
Recording from an external audio source
or
Press play on your external
equipment (if necessary) to begin
playback to be recorded.
7
7
Press the MODE/REC button.
To play a recorded file [ 2]
After pressing the NAVI/MENU button,
select a recorded file using the
VOL +
or
VOL -
switch.
Press the PLAY/STOP button.
Press the PLAY/STOP button.
Recording-external audio source
To stop recording To play a recorded file [ 1]
- The recorded file is saved as
AUDIO000.REC, AUDIO001.REC... in
sequential order. Files are saved in the
RECORD folder.
- Select Ext. Mic on the CONTROL line-
in/ext. mic menu to use the external
microphone. (Refer to page 4-23)
- Files recorded using an external
microphone are saved as EXMIC000.REC.
NOTE
Basic Operation
Basic Operation
Convenient Functions
Convenient Functions
Contents
5
NAVIGATION (SEARCHING)
PLAYBACK MODE
PROGRAM MODE
EQ MODE
MENU
Basic Operation
General
Display
Timer
Control
Mode
Name
Sound
5-1
5-3
5-5
5-8
5-9
5-10
5-12
5-14
5-17
5-20
5-24
5-26
5-27
ASF WMA
OGG MP3 REC
Convenient Functions
Navigation (Searching)
Navigation
5-2
Navigation (Searching)
Convenient Functions
Navigation
5-1
Navigate to locate tracks to play.
YoucanselectasongbypressingtheNAVI/MENU
buttonandusingtheVOL+,VOL-switch.
NAVI/MENU button
1
1
2
2
Select the track
4
4
Select folder or scroll to upper folder
3
3
FILE FORMAT
IRM (iRiver Rights Management)
iRiver Rights Management is a digital music format.
Please visit our web site for details about this music format.
IRM
Scroll up
Scroll down
Select the upper folder
Scroll up
Select the
folder or file
Scroll down
Scroll up
Scroll down
Select the track
MODE (Playback Mode)
INTRO
5-4
MODE (Playback Mode)
MODE (Playback Mode)
5-3
You can set various Repeat and Shuffle
options by choosing these selections under
Mode. Change the Repeat or Shuffle mode
by pressing the MODE button. Please refer
to the MODE function controls (page 5-24)
for user-defined configuration.
When the MODE/REC button is pushed, the
icon in the playback mode indicator is changed.
Play a single track repeatedly.
Play all tracks in the folder and stop.
Play all tracks in the folder repeatedly.
Play all tracks in the player repeatedly.
REPEAT
Randomly play all tracks in the player and stop.
Play a single track repeatedly.
Skip forward will select a new random track to play repeatedly.
Randomly play all tracks in the folder and stop.
Randomly play all tracks in the folder repeatedly.
Randomly play all tracks in the player repeatedly.
SHUFFLE
Interval Repeat(A-B)
Repeat a selected interval.
A-B interval will be repeated.
Press the button once to
select the beginning <A>
point.
Press the button again to select
the ending <B> point.
INTRO: Plays the beginning 10 seconds of each track in sequential
order.
INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track in
sequential order. You can set this function in the MENU function.(Refer to
page 5-25)
Convenient Functions
Convenient Functions
Program Playback
Activating Program mode
5-6
Program Playback
Activating Program mode
5-5
You can listen to your favorite songs by using Program Mode.
Click the MEMORY/EQ button at Stop playback.
The program list is displayed. If the player has been programmed already, the current
program list will display.
1
1
2
2
To save all files in the folder as the program list
After selecting a folder to save, then press the MEMORY/EQ button to save all files in
the folder. Sub folders are not added.
3
3
4
4
After programming, press PLAY/STOP button
to play the tracks in sequential order.
Program Playback
Scroll to PROGRAM mode
Music name
C
l
i
c
k
Numbers of
program list
C
l
i
c
k
The PROGRAM mode icon appears
Push the VOL +, VOL - switch to select the number to be programmed.
Press the NAVI/MENU button once and navigate to the desired track. Press
the NAVI/MENU button again to save that track to the program list.
Press the MEMORY/EQ button to save the program list.
Convenient Functions
Convenient Functions
EQ Mode
EQ MODE
5-8
Program Playback
To remove files from the program list
5-7
PushtheNAVI/MENUbuttontowardVOL-atStopmode.
Program playback is cancelled and normal playback is started.
Cancel Program Mode
Press the MODE/REC button after selecting the file to be deleted using the
MEMORY/EQ button. The program list is automatically changed.
Click
You can select EQ mode in accordance to
the playing music genre.
Press and hold the MEMORY/EQ button to
display the current EQ setting. Then
press the button repeatedly to chose a
different EQ.
Xtrm EQ and 3D are set in the MENU, refer to page 5-27 through 5-29 for details.
To delete all programmed songs, press MEMORY/EQ button for several seconds.
P
u
s
h
In Stop Mode
You can select your favorite EQ as the set value on the EQ SELECT menu.
The set value on the menu is saved but EQ mode is not changed in case of not selecting
Xtreme EQ and Xtreme 3D.
NOTE
CAUTION
Convenient Functions
Convenient Functions
MENU
Configuration
5-9
Functions are subject to change with different firmware versions.
Users can configure their own settings.
resume
language
load default
back light
lcd contrast
visualization
scroll speed
tag information
play time information
battery select
sleep Power Off
stop Power Off
set Time
alarm/Record Select
set Alarm
tuner Rec. Reservation
fast skip
scan speed
voice recording mode
voice auto detection
tuner recording mode
line-in recording mode
line-in recording volume
line-in auto-sync
line-in/ext. mic
repeat
shuffle
intro
study
name
Xtreme EQ
Xtreme 3D
DBE setting
3D EQ setting
sound balance
eq limit
eq select
beep volume
fade in
GENERAL DISPLAY
TIMER
SOUND
CONTROL
MODE
5-10
MENU-Basic Operation
Basic Operation
MAIN MENU SUB MENU Window for SUB
MENU SETTING
Press and hold the NAVI/MENU button to display the MENU system.
The MENU system is composed of 6 main menus with sub-menus.
To select Main Menu
FromMainMenutoSubMenu
Shift between Menus
Push the
or switch to move
between main menu and sub menu.
Click
P
u
sh
Convenient Functions
Convenient Functions
MENU-Basic Operation
To select Sub Menu
5-12
5-11
You can set, cancel or change Sub Menu by pressing the NAVI/MENU switch
toward
, orVOL+,VOL-.
Click the PLAY/STOP button to exit
Main Menu.
Click the PLAY/STOP button to return
Main MENU at the sub-menu setting.
Exit Sub Menu Exit Main Menu
Enter Sub Menu
Click
P
u
s
h
MENU-General
GENERAL
ON : Playback resumes from the previous location
in a song when the player is stopped or
powered off.
OFF : Playback begins from the first track after the
player is stopped or powered off.
Resume
Supports 40 languages
Song title and ID3 tag information for the MP3 files is
dependent on the version of the PC operating system
that was used to create it. (For example, if an MP3
file is created in a English version of Windows, the
language setting should be English for the proper title
display)
LANGUAGE (Supports 40 languages)
RESUME
LANGUAGE
LOAD DEFAULT
Convenient Functions
Convenient Functions
MENU-General
5-14
5-13
Initialize Menus to the original factory settings.
Button operation order is as below.
Click NAVI/MENU (select default menu) or VOL +
(select YES)
Click NAVI/MENU (select YES : Initialization)
Load Default Value
RESUME
LANGUAGE
LOAD DEFAULT
MENU-Display
Display
You can adjust the time that the Backlight stays on.
SEC : Backlight stays on from 0 to 30 seconds.
MINUTE : Backlight stays on from 0 to 30 minutes.
Press the NAVI/MENU button to set SEC/MINUTE.
Back-Light
BACK LIGHT
LCD CONTRAST
VISUALIZATION
Adjust the LCD screen contrast.
Contrast can be adjusted by using the
or
(VOL + or VOL -) buttons.
LCD Contrast
BACK LIGHT
LCD CONTRAST
VISUALIZATION
Convenient Functions
Convenient Functions
MENU-Display
Scroll Speed
5-16
5-15
During playback, you can display visisualtions,
theelapsedtimeofthetrack,orthefreememory
on your player.
ON : Display track with ID3 tag information
OFF : Display track with file name
File name will be displayed by default for songs
with no ID3 information.
Adjust scroll speed by 1x/2x/4x/Vertical/Horizontal.
Vertical : The scroll goes up and down
Horizontal : The scroll goes from the left to
the right.
Visualization
Tag Information
BATTERY SELECT
WAVEFORM
LEVEL METER
PROGRESSIVE
FREE SPACE
CLOCK
SCROLL SPEED
TAG INFORMATION
PLAY TIME INFORMATION
VISUALIZATION
SCROLL SPEED
TAG INFORMATION
MENU-Display
NORMAL : display elapsed time.
REMAIN : display remaining time.
Note : Time display may not be accurate for files
encoded in Variable Bit Rate formats.
Playtime Information
Select the current battery.
The player will manage the battery indicator icon
to better match the usage level.
TAG INFORMATION
PLAY TIME
BATTERY SELECT
Convenient Functions
Convenient Functions
MENU-Timer
Timer
Automatically turns power off at stop mode.
(Time range can be set from 1 to 60 minutes by one
minute increments.)
Use the or (VOL + or VOL -) button to adjust time.
Automatically turns power off after a fixed
time. (Time range can be set from 1 to
180 minutes by one minute increments.)
Use the or (VOL + or VOL -) button to adjust time.
Set BEEP ON/ OFF by pressing the NAVI/MENU button.
Beep
ON : A beep sound will play one minute before the player shuts off.
OFF : No beep sound is played.
Once powered off, the sleep timer will reset to 0.
Sleep Power Off
Stop Power Off
SLEEP POWER OFF
STOP POWER OFF
SET TIME
5-17
MENU-Timer
Set Time
Alarm/Record Select
Set Alarm
Set the current time.
Push the NAVI/MENU switch toward
or
to select the item and toward VOL + or VOL - to
set the clock.
Use the
or switch to adjust time.
OFF : The Alarm and Tuner Record functions are
disabled and the player will not power on at either
indicated time.
ALARM : At the time indicated in the "Set Alarm"
setting (see below) the player will power on and
begin music playback.
TUNER RECORD : At the time indicated in the "Tuner Rec. Reservation"
setting(seepage5-19)theplayerwillpoweronandbeginrecordingfromthe
selected radio station.
Set the working time of alarm.
Push the NAVI/MENU switch toward
or
to select the item and toward VOL + or VOL - to
set the alarm.
SUN~SAT:Alarmringsinthesametimeofthe
set day repeatedly.
ALL : Alarm rings in the set time every day.
5-18
Convenient Functions
Convenient Functions
5-20
MENU-Control
Control
The fast scan speed can range from 1x/ 2x/ 4x/ 6x.
OFF : Skip doesn’t activate.
10 : Skip 10 tracks at time.
DIRECTORY : Skip to previous or next folder.
This defines the operating method of short or long
click of
or lever.
Fast Skip
FF/RW Scan Speed
5-19
MENU-Timer
Tuner Rec. Reservation
Set the time and station to be recorded.
Push the NAVI/MENU switch toward
or
to select the item and toward VOL + or VOL - to
set the recording time.
SUN ~ SAT : Tuner recording is started at the same time of the set day
repeatedly.
ALL : Tuner recording is started at the set time every day.
Convenient Functions
Convenient Functions
5-22
5-21
MENU-CONTROL
Voice Recording Mode
The voice recording mode will automatically pause
during silence. This is useful for recording over a long
period of time to save memory.
AGC ON : When recording voice, the recording level is
automatically controlled and the sound from a long distance
is normally recorded.
AGC OFF: AGC Control not activated.
OFF : Voice Auto Detection is disabled.
Voice Auto Detection (first slider) : Set the relative level
of sound needed to activate the recorder. (Level 1-10).
Record pause time (second slider) : Set the number of seconds of silence to record before
pausing. (1-10 Sec)
Voice Auto Detection
You can adjust recording quality when recording
from the FM Tuner.
Bit Rate : 8Kbps~320Kbps
Sampling Frequency : 11.025KHz ~44.1KHz
TUNER RECORDING MODE
TUNER RECORDING MODE
MONO STEREO
32KHz
128KBPS
MENU-CONTROL
LINE-IN RECORDING MODE
You can adjust recording quality when recording
from external equipment.
Bit Rate : 8Kbps~320Kbps
Sampling Frequency : 11.025KHz ~44.1KHz
You can adjust recording level when recording
from External equipment.
(You can set from 0 to 64.)
LINE-IN RECORD VOLUME
LINEIN RECORDING MODE
MONO STEREO
44.1KHz
128KBPS
LINEIN RECORD VOLUME
45
Line-In, a new file will be created for each track on
the CD automatically.
- OFF : Audio signal detection is disabled.
- Audio signal detection time (1-5 seconds) : The
amount of silence the player will use to determine
when a track has ended and to start a new file.
LINE-IN AUTO-SYNC
LINE-IN RECORDING
LINE-IN RECORDING
LINE-IN AUTO-SYNC
LINEIN AUTO-SYNC
(off)
0
You can adjust recording quality when recording Voice.
Bit Rate : 8Kbps~160Kbps
Sampling Frequency : 11.025KHz ~44.1KHz
AGC :Automatic Gain Control
NOTE
Convenient Functions
Convenient Functions
5-23
MENU-Control
Line-in/Ext. Mic
You can select external microphone or
line-in when recording.
Line-In : To record through Line-In
Ext. Mic : To record through an external microphone
LINE-IN RECORDING
LINE-IN AUTO-SYNC
LINE-IN/EXT. MIC
Line-in/Ext. Mic
Line-in
Ext. Mic
- To record from an external microphone, chose the LINE-IN recording mode
(see page 5-14, 5-15).
- The recording quality level will be set to the values chosen for LINE-IN recording
(see page 5-22).
NOTE
MENU-Playback Mode
Playback Mode
Repeat Mode/ Shuffle Mode
A number of Repeat and Shuffle modes are available. Select the one you
want by pressing MODE button (Multi selecting available)
(refer to page 5-3, 5-4)
After push
How to select
And button for selection.
Only the selected PLAYBACK MODE will be available when you press the
MODE/REC button (For details, please refer to page 5-3, 5-4)
And buttontoexit.
REPEAT
SHUFFLE
INTRO
REPEAT
SHUFFLE
INTRO
or
5-24
Convenient Functions
Convenient Functions
5-26
5-25
MENU-Mode
Intro Mode
Intro: Plays the beginning 10 seconds of each
track.
Intro Highlight : Plays 10 seconds from 1 minute
into each track in sequential order.
REPEAT
SHUFFLE
INTRO
SHUFFLE
INTRO
STUDY
While playing, short slide of the , (or
VOL +, VOL -) lever will skip the current track
set time ahead.
OFF : Study Mode is disabled.
The range is 1~60 seconds.
STUDY MODE
You can input your name or custom text. The saved text
is displayed when playback stops.
Select the character by using and
switch and press Navi/Menu button to input the
character.
To delete the character, press MODE button.
To scroll between English and your preferred
language, use MEMORY/EQ button.
To move the cursor in the name window, use +
and - on Volume switch.
Save and Exit
Name
Stopped playback
Button Operation
MENU-Name
NOTE
Chinese and Chinese characters are not supported in the Name feature.
Convenient Functions
Convenient Functions
5-27
5-28
MENU-Sound
P
u
sh
P
u
s
h
Click
Sound
You can adjust the sound to your preference.
There are 5 band frequency steps, set from
-15dB to +15dB by 3dB step.
1. Select the
Frequency step to
set using the ,
switch.
2. Adjust the level using
the VOL + or VOL -
switch.
3. To exit Xtreme EQ
setting
Select the Frequency
Adjust the level
Xtreme EQ
How to set Xtreme EQ
MENU-Sound
Xtreme 3D
You can adjust the level of 3D sound(minimum,
Natural, and Maximum). You can extend 3D sound
by selecting Bass Boost or 3D EQ. You can also
adjust the level of 3D sound with the
or (or
VOL +, VOL -) lever. Select DBE or 3D EQ with the
Navi/Menu button.
You can select the Bass Center Band level from
Band 1 to 4. You can also set the Bass Boost gain
from 0 dB to 15dB by 3dB step.
DBE (Dynamic Bass Enhancement) enhances
Low & Middle frequencies and only operates when
using Xtreme 3D.
SetEQtoUserEQtouse3DEQ.
You can adjust the sound to your preference.
There are 5 band frequency steps, set from -15dB
to +15dB by 3dB step.
DBE Setting
3D EQ Setting
Convenient Functions
Convenient Functions
5-29
5-30
MENU-Sound
Sound Balance
Balance your sound to the right or left or keep it in
the center according to your preference. When
Sound Balance bar is moved to L (Left, 20),the
sound outputs at the left earphone. When the lever
is moved to R (Right, 20) the sound outputs at the
right earphone. The default value is 0 and the sound
outputs the same level at both earphones.
ON : Limit the control of equalizer frequency
to prevent distortion of sound.
OFF : You can enjoy the original sound
though distortion of sound may occur.
You can select various EQ modes.
Press NAVI/MENU button after selecting EQ by
using
or (orVOL+,VOL-)switch.
You can not select NORMAL EQ.
If you do not select Xtrm EQ or Xtrm 3D, Xtrm EQ or Xtrm 3D modes will not be available during playback.
EQ Limit
EQ Select
SOUND BALANCE
EQ LIMIT
EQ SELECT
NOTE
Set beep volume ON/OFF or level.
Set to "0" for OFF.
Beep Volume
EQ LIMIT
EQ SELECT
BEEP VOLUME
Sound Fade in
When activated, volume increases gradually at
playback mode to prevent sudden loudness.
EQ SELECT
BEEP VOLUME
FADE IN
MENU-Sound
Convenient Functions
Convenient Functions
AdditionalInformation
Additional Information
Contents
6
TROUBLE SHOOTING
PRECAUTIONS
ACCESSORIES
SPECIFICATIONS
6-1
6-2
6-3
6-4
Road Safety
Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It
may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play
your headsets at high volume while walking, especially at pedestrian crossings. You should
exercise extreme caution or discontinue use in potentially hazardous situations.
Preventing hearing damage
Avoid using headphones/earphones at high volume. Hearing experts advise against continuously
loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.
Consideration for others
Keep the volume at a moderate level. This will allow you to hear outside sound and to be
considerate of the people around you.
On Headphones and Earphones
Safety
Should any problem persist after you have checked these symptoms,
consult your iRiver dealer or contact support at www.iRiver.com.
AdditionalInformation
Precautions
6-2
Trouble Shooting
AdditionalInformation
6-1
No Power
No sound or distortion
during playback.
Characters in LCD are
corrupted.
Poor FM Reception.
Failed download of MP3 file
Check whether the HOLD switch on the player is ON
(Switch to OFF position)
Check the condition of the battery.
Insert a fresh battery.
Check whether VOLUME is set to "0".
Connect the earphones plug firmly.
Check whether the plug is dirty. Clean the plug with a dry
and soft cloth.
Corrupted MP3 or WMA files may make a static noise and
the sound may cut off. Listen to your files on the PC to
see if they are corrupted.
Check out Menu
General Language and confirm
whether the right language has been selected.(Refer to
page 5-12)
Adjust the position of the player and earphones.
Turn off the power of other electric devices near the
player.
The Earphone cord functions as the antenna, they must
be plugged in for best reception.
Check the condition of the battery.
Check the connection between your computer and the
player to ensure that the cable is secure.
Check the Manager program to make sure it is operating.
Check whether the player’s memory is full.
Avoid dropping or impacting the player.
The player is designed to operate while walking or running, but dropping or excessively impacting
the player maybe cause damage.
Avoid contacting the player with water.
Damage to the internal parts of the player may occur if the player comes into contact with water. If
your player gets wet, dry the outside with a soft cloth as soon as possible.
Do not leave the player in a location near heat sources, or in a place subject to direct
sunlight, excessive dust or sand, moisture, rain, Mechanical shock, unleveled surface, or in
a car with its windows closed.
Remove the battery if player is unused for long periods of time.
Battery left in the player for a long time can corrode and damage the device.
All data stored on this device may be erased by a excessive impact, a thunder or an
electricity failure, etc. on the device.
The Manufacturer does not warrant and will not be held responsible in any way for damages or loss
of data, including loss of data stored on this device, resulting from a excessive impact, a thunder or
an electricity failure. You will be responsible for safe-guarding all data stored on this device.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
USB cable
Carrying Case
Installation CD
Neck strap for carrying
Audio Cable (Line-In)
Accessories subject to change without notice and may vary from image shown.
Specifications
6-4
Accessories
6-3
Arm Band
User Manual/Warranty card
Quick Start Guide
Earphone/ Earphone cover
Battery(AA type 1EA)
Additional Information
Additional Information
Memory
Model No
USB version
128MB
iFP-780
1.1 (Full speed)
256MB
iFP-790
2.0 (High speed)
512MB
iFP-795
2.0 (High speed)
Memory is not expandable.
1GB
iFP-799
2.0 (High speed)
FM Frequency range
S/N ratio
Antenna
Dimension
Weight
Battery
Operational Temperature
FM TUNER
20 Hz ~ 20 KHz
(L)18 mW + (R)18 mW (16 Ohm) max. Volume
(L)12 mW + (R)12 mW (32 Ohm) max. Volume
90 dB(MP3)
87.5 MHz ~ 108 MHz
60 dB
Headphone/Earphone-Cord Antenna
MPEG 1/2/2.5 Layer 3, WMA, OGG, ASF
8 Kbps ~ 320 Kbps
(OGG : 44.1 KHz, 96Kbps~225Kbps)
ID3VI,ID3V22.0,ID3V23.0,ID3V24.0
11.025KHz ~44.1KHz, 8Kbps ~ 320Kbps
Full Graphic 4 Line with Backlight
40 Languages
Approx. 40 hours (128 kbps, MP3, Volume : 20, EQ Normal,
LCD: OFF, Alkaline “AA” 2400mAh)
87(W) x 32(D) x 26.7(H) mm
37 g (w/o Battery)/ 62 g (Battery included)
1AATypeAlkalinebattery
-5
~40
Category ITEM Specifications
Encoding
LCD
Language
Voice Recording
Max. Playtime
Approx. 36:00 hrs
(8kbps, 128 MB)
Approx. 72:00 hrs
(8kbps, 256 MB)
Approx. 144:00 hrs
(8kbps, 512 MB)
Approx. 288:00 hrs
(8kbps, 1 GB)
Audio
FILE
SUPPORT
File Type
Bit Rate
Tag Info
Frequency range
Headphone Output
S/N ratio
6-5
6-6
NoteNote
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iriver iFP-700 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iriver iFP-700 Series in de taal/talen: Engels als bijlage per email.

De handleiding is 2,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info