EN-12
shield the camera view.
Note:
When your camera battery is low, the status LED will flash
in red. You need to recharge your camera. (Refer to
section 4.1)
5.3. Taking Time Lapse photos
Time Lapse mode captures a series of photos at 30 second
intervals.
To Start Time Lapse:
Slide the Time Lapse switch to ON position to enter the Time
Lapse mode, the camera will initiate a countdown. The Blue LED
will flash each time a photo is taken.
Note
:
When your camera battery is low, the status LED will flash
in red. You need to recharge your camera. (Refer to
section 4.1)
To Stop Time Lapse:
Slide the Time Lapse switch to OFF position to exit the Time
Lapse mode.
Notes:
y You can also take single photos and record videos during
Time Lapse mode. After the single photo is captured or
the video is recorded, the camera will resume to Time
