790020
52
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
Problem/
error
Indication on the display unit
and problem description What to do?
»PF«
Power supply failure warning
(»PF«/Power Failure) Washing process was interrupted due to power supply failure. To restart,
press the Start/Pause button.
Unresponsive display unit and
all buttons
Manually (physically) stop the programme by pressing the button On/Off/
Reset and hold it for more than 3 seconds. Unplug the power cord from
the outlet; then, plug the power cord back into the outlet and switch on
the washing machine. If the error reoccurs, call a service technician.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until
programme completion is
alternately lit and off on the
display unit .
To resume the washing programme, press the button Start/Pause,
ormanually (physically) stop the programme and press the button On/
Off/Reset and hold it for more than 3 seconds.
Preparation for unlocking
thedoor
Signal lights will flash on the
display unit. Wait until the process is completed. If no error is indicated after the
process, then a new programme can be started. Water has to be drained.
Wait for the door to unlock.
Noise and vibration Make sure the appliance is levelled using the adjustable legs and that the
jam nuts are securely tightened.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems such as vibration
andnoisy operation.
The washing machine detects such problems and the UKS* (*stability control system) will be activated.
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with special geometrical
properties are virtually impossible to distribute evenly across the washing machine drum (slippers, large items etc.).
This results in several attempts to redistribute the laundry, which in turn leads to longer programme duration. In extreme
cases of unfavourable conditions, the programme can be completed without the spinning cycle.
The UKS* (*stability control system) allows stable operation and a longer useful life of the washing machine.
If the problems persist despite observing the advice above, call an authorised service technician. Repairs or warranty
claims resulting from incorrect connection or use of the washing machine shall not be covered by the warranty. In this case,
theuser will cover thecost of repair.
CUSTOMER SERVICE
WARNING! Risk of electric shock
Never try to repair an appliance which is defective or presumed to be defective. You may put your own and future users’
lives indanger. Only authorised specialists are allowed to carry out this repair work.
Improper repair will void the warranty and subsequent damages cannot be recognised!
TRANSPORT
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
Unplug the appliance and close the water tap.
Check that the door and dispenser tray are closed properly.
Remove the water supply hose and the water discharge hose from the house installations.
Allow the water to drain completely from the appliance.
IMPORTANT: Re-install the transport bolts in the back of the appliance.
The appliance is heavy. Transport with care. Never hold any protruding part of the appliance when lifting. The door of
theappliance cannot be used as a handle.
52 English
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum VWM9001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum VWM9001 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1.6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info