694949
13
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
using the mixer
4
English 13
cleaning & maintenance
6
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the
appliance.
1. Place the mixer on a flat, clean and dry surface.
2. Make sure that the mixer is not activated.
3. Place the ingredients in the jug and lock it with the lid. Place the jug with the handle on the right side onto
the base and turn it clockwise, until you feel it click into place.
4. Activate the mixer by choosing a speed setting.
Attention: Do not activate the mixer constantly, this can cause engine problems. Do not use the mixer for
more then 1 minute continuously, wait 1 minute before you operate it again.
5. When the mixer has finished mixing, blending or crushing turn the control button OFF (0) and wait until
the knives have stopped turning, before you remove the jug.
tips
5
When the jug is cracked, do not use the mixer anymore. This could lead to damage while using the mixer.
To avoid splashes always place the lid on the jug.
Always add liquid ingredients before adding solid ingredients in the mixer.
The mixer mixes best when you do not add pieces which are too large.
Always add a half a cup of liquids when you crush ice cubes.
To add ingredients while the mixer is activated, take the cap out of the lid and add the ingredients through the opening.
When the ingredients stick to the sides of the jug or are not mixed properly, shut off the engine: wait until the knives have stopped
turning and push the ingredients with a spatula towards the knives.
To prevent the ingredients from being blend to small, take into account that the mixer mixes in seconds, not minutes!
Working with warm ingredients can cause a build-up of pressure in the jug and that can cause hot liquids to escape when you take
the lid of the jug. Therefore always remove the cap from the lid when you are processing warm ingredients.
Always unplug the cord from the socket before cleaning the appliance.
Wipe the base with a damp cloth. Do not use any abrasive or strong detergents.
Never place the appliance, the power cable or the plug in water or any other liquid.
Remove the knives according to the instructions below. Be careful, the knives are extremely sharp. Clean the knives as a whole do
not try to take them apart. Attention: do not use any abrasive or strong detergents.
For placing and removing the knives you need the glass jug and the knives. Place the glass jug, without the lid, upside down on a flat
stable surface. Put your thumb and forefinger in the middle plastic ring and loosen it clockwise. Now take the knive assembly and
the silicone ring out of the blender. Attention: never try to take the knive assembly apart.
To replace the knives follow the instructions in the reverse order. Make sure not to forget to place the silicone ring. The blender will
leak without the silicone ring.
The following parts can be cleaned: the jug, the knive assembly, the lid and the cap. Be careful when cleaning the knive assembly.
The knives are very sharp.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum NB450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum NB450 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info