704956
6
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
The doors of the appliance can be opened on the right or left side. In order to reverse the door openings, please observe the
instructions below. It would be best to do this with two people.
Attention: switch off the thermostat and remove the plug from the socket. Remove all items from the refrigerator, including
the shelves and drawers, before reversing the door opening.
1.
Remove the upper hinge cover (right) a, then remove the screws b, and remove the hinge c. Place the upper hinge cover
a back in the bag with parts. Lay the screws b and the hinge c aside to use them later on.
Remark: During this step, hold the upper door with your hand to prevent it from falling.
2.
Remove the upper door and carefully place it on a flat surface with the panel facing upwards. Loosen the screws a, and
remove section b. Then install section b on the left side of the door with screws a.
3.
Loosen the screws a of the middle hinge b and remove the middle hinge b. Then remove the bottom door.
4.
Remove the bottom door and carefully place it on a flat surface with the panel facing upwards. Loosen the screws a, and
remove section b. Then install section b on the left side of the door with screws a.
5. Move the caps of the screw holes from the left to the right side.
6.
Then tilt the refrigerator backwards by maximum 45°. Remove section c and then loosen the screws d. Remove sections
e, b and section a.
7. Unscrew the bottom hinge, turn it around and attach it to the other side of the refrigerator.
8. Move section a to the left side and sections b, e to the right side and then attach section a with screws d. Finally you will
install section c. Carefully place the appliance upright again.
9.
Place the bottom door against the appliance and make sure the bottom side is properly placed on the bottom hinge.
Make sure the door is straight in relation to the exterior of the refrigerator.
Turn the middle hinge 180 degrees and attach it on the correct side of the refrigerator.
10. Loosen the shaft of the upper hinge, turn the hinge 180 degrees and re-attach the shaft. Keep the hinge nearby, because
you will need it in the next step.
11. Remove the upper cover a on the left side and attach the hinge cover b for the right side. The hinge cover b can be found
in the plastic bag with parts.
12. Place the upper door on the correct position against the appliance and then attach the upper hinge a with the screws
b. In order to cover the hinge, place the correct hinge cover c (from the plastic bag) on the refrigerator. Remark: When
installing the hinge cover c, first push it from left to right and then down.
13. Place the shelves and drawers back in the refrigerator. Allow the appliance to rest for 2 to 3 hours before inserting the
plug in the socket.
reversing the door openings
EN
Die Türen des Geräts können auf der rechten oder auf der linken Seite geöffnet werden. Gehen Sie wie folgt vor, wenn Sie
den Türanschlag wechseln möchten. Arbeiten Sie vorzugsweise mit zwei Personen.
Achtung: Schalten Sie den Thermostat aus und ziehen Sie den Stecker aus der Steckdose. Nehmen Sie alles aus dem Gerät
heraus (auch die Böden und Schubladen), bevor Sie den Türanschlag wechseln.
1.
Entfernen Sie die Kappe des oberen Scharniers (rechts) a, entfernen Sie anschließend die Schrauben b und dann das
Scharnier c. Legen Sie die Kappe des oberen Scharniers a in den Beutel mit Kleinteilen zurück. Legen Sie die Schrauben b
und das Scharnier c für die spätere Verwendung zur Seite.
Hinweis: Halten Sie die obere Tür bei diesem Schritt mit der Hand fest, um zu verhindern, dass die Tür herunterfällt.
2.
Nehmen Sie die obere Tür ab und legen Sie diese vorsichtig und mit der Türfüllung nach oben auf einen ebenen
Untergrund. Lösen Sie die Schrauben a und entfernen Sie Teil b. Befestigen Sie Teil b mit den Schrauben a auf der linken
Seite der Tür.
3.
Lösen Sie die Schrauben a vom mittleren Scharnier b und entfernen Sie das mittlere Scharnier b. Bauen Sie dann die
untere Tür ab.
4.
Nehmen Sie die untere Tür ab und legen Sie diese vorsichtig und mit der Türfüllung nach oben auf einen ebenen
Untergrund. Lösen Sie die Schrauben a und entfernen Sie Teil b. Befestigen Sie Teil b mit den Schrauben a auf der linken
Seite der Tür.
5. Nehmen Sie die Abdeckkappen aus den Schraublöchern auf der linken Seite und stecken Sie diese in die Löcher auf der
rechten Seite.
6.
Kippen Sie den Kühlschrank maximal 45° nach hinten. Entfernen Sie Teil c und lösen Sie dann die Schrauben d.
Entfernen Sie die Teile e und b sowie Teil a.
7. Lösen Sie die Schrauben des unteren Scharniers, bauen Sie dieses aus und drehen Sie es um. Befestigen Sie es dann auf
der anderen Seite des Kühlschranks.
Türanschlag wechseln
DE
6
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum KV143EXP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum KV143EXP in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info