790072
39
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
before using for the first time
3
Follow these instructions when using the appliance for the first time: Carefully unpack the air conditioner and all accessories
and remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation.
Check that all mentioned accessories have been supplied.
Clean the air conditioner with a slightly damp cloth.
Prior to connecting the appliance, check that:
the connection voltage corresponds with what is stated on the information plate;
the socket and cord are suitable for the appliance;
the plug of the cord fits in the socket;
the appliance is placed on a stable and flat surface.
PLACEMENT OF THE AIR CONDITIONER
The appliance should be placed on a sturdy, flat surface with sufficient free space
around it.
Do not block the air outlet and ensure a free space of minimum 45 cm around the
appliance.
After placing the appliance in a straight position, allow it to stand for at least 2
hours before inserting the plug in the socket.
For the benefit of easy movement, the appliance has been provided with castors.
Carefully roll the appliance over the floor. Make sure the floor is flat and try not to
drive over anything.
REMARK: Optimum operation of the appliance depends on the length of the
discharge hose and the number of bends. Try to limit both. The supplied flexible
discharge hose has a maximum length of approx. 150 cm and corresponds with the
capacity of the appliance. The use of any other hoses or extensions could cause
failures in the appliance. The air should be able to flow without hindrance, or else
this could lead to overheating of the appliance or condensation of water in the
air discharge hose. Therefore make sure there are no kinks or sharp bends in the
discharge hose. For an optimum result, the discharge hose should be kept shorter
than 1 metre during use of the appliance.
INSTALLING THE AIR DISCHARGE HOSE
Place the appliance near a window or opening, so that the air can flow to the outside via the discharge hose.
1. Carefully pull out the discharge hose until the required length is achieved.
2. Screw the connection piece on one end of the discharge hose.
3. Screw the other connection piece on the other end of the discharge hose.
4. Attach the discharge hose to the air outlet on the rear of the appliance.
5. Hang the other end of the discharge hose to the outside. Ensure a free passage of the hose. Close the window or door
to the extent possible. If necessary, use the window seal set.
English 39
slide into
Fig. 4
Fig. 3
Fig. 1
Fig. 2
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum AC907W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum AC907W in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 16.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info