Chapter 2 — Connecting and Configuring the CK61
36 CK61 Handheld Computer User’s Manual With Windows Mobile
To use wireless communications in a TCP/IP network
1 TapStart > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on each CK61 in the
network:
• Network name (SSID)
• IP settings (if not using DHCP)
3 Make sure the CK61 is talking to the network and that the
network can see the CK61.
4 Configure security. For help “Configuring Security On the
CK61” on page 46.
The easiest way to configure the network parameters on the CK61 is
to use Intermec Settings. For help, see “Configuring the CK61 With
Intermec Settings” on page 23.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK61communicates with a host
computer through the Intermec Application Server. The Intermec
Application Server translates UDP Plus packets on the wireless
network into TCP/IP packets on the wired networks and vice versa.
The access point acts as a bridge to allow communications between
the wired network and the wireless network.
To use wireless communications in a UDP Plus network
1 TapStart > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on the CK61:
• Network name (SSID)
• Controller IP address
• IP settings (if not using DHCP)
• Network port
3 Make sure the CK61 is talking to the network and that the
network can see the CK61.
4 Configure security. For help, “Configuring Security On the
CK61” on page 46.
