595573
9
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
741 and 751 Mobile
Computers
(Windows Mobile 5.0)
Users Manual
ii 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior noticed and do
not represent a commitment on the part of Intermec Technologies Corporation.
© 2007 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser,
Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, INCA (under license), i-gistics, Intellitag, Intellitag
Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan,
Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks
or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org).
Contents
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual iii
Contents
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Web Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
1
Using the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Using the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing and Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Understanding the Ambient Light Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Understanding the Audio System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Locating the Speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Locating the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Locating the External Headset Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Adjusting the Beeper Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the Backlight for the Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Entering Key Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using Orange or Orange/White Plane Keys . . . . . . . . . . . . . . . . . . . . . . 10
Using the Green Plane Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the Alpha Plane Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Understanding the Screen Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Aligning the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Understanding the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Scanning Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Scanning With the Laser Scanner or Linear Imager . . . . . . . . . . . . . . . . . . . . . . . 16
Scanning With an Area Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Attaching a Scanner to the Serial Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Attaching a Tab to the SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Accessing Files Stored on the SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Removing the SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Contents
iv 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
2
Understanding Windows Mobile 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Understanding Windows Mobile 5.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Finding Information in Windows Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Learning the Basic Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Accessing Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Navigation Bar and the Command Bar. . . . . . . . . . . . . . . . . . . . . . . . . 26
Using Pop-Up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Entering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Typing With the Onscreen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Block Recognizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting Typed Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Writing on the Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Finding and Organizing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Customizing the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adding or Removing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using Microsoft ActiveSync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using Internet Explorer Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Configuring the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring the Computer Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Configuring the Computer With Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . 38
Remotely Configuring the Computer Using SmartSystems Foundation . . . . . . . . 39
Synchronizing the Computer System Time with a Time Server . . . . . . . . . . . . . . 39
Configuring Personal Area Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configuring the Computer to Communicate With a Wireless Scanner. . . . . . . . . 41
Configuring Bluetooth Communications for Wireless Printing . . . . . . . . . . . . . . 42
Creating an Application That Lets You Print Wirelessly . . . . . . . . . . . . . 42
Selecting the Current Wireless Printer on the Computer. . . . . . . . . . . . . 43
Configuring Local Area Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configuring USB Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configuring Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configuring 802.11 Radio Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Configuring the Network Parameters for a TCP/IP Network . . . . . . . . . 46
Configuring the Network Parameters for a UDP Plus Network. . . . . . . . 46
Checking the Status of Your Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . 47
Contents
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual v
Configuring Security on the Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . 50
Configuring Funk Security Using Intermec Settings . . . . . . . . . . . . . . . . 50
Configuring Funk Security Using the Profile Wizard . . . . . . . . . . . . . . . 53
Configuring Microsoft Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Loading a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Disabling Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
4
Developing and Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Developing Applications for the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Developing a New Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Developing a Web-Based Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Installing Applications Using SmartSystems Server . . . . . . . . . . . . . . . . . . . . . . . . 70
Installing Applications Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . 70
Installing Applications Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Installing Applications Using the FTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Installing Applications Using Wavelink Avalanche . . . . . . . . . . . . . . . . . . . . . . . . 72
Freeing Up Virtual Memory for Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Launching An Application Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Upgrading the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using an SD Card to Upgrade the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using the SmartSystems Console to Upgrade the Computer. . . . . . . . . . . . . . . . . 76
5
Troubleshooting and Maintaining the Computer . . . . . . . . . . . . . . . . . . . . . . . . 79
Calling Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Troubleshooting Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Resetting Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Warm Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Cold Booting the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Clean Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Cleaning the Scanner Window and Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
A
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Physical and Environmental Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
I
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Contents
vi 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Before You Begin
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual vii
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
This section explains how to identify and understand cautions and notes
that are in this document.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the Intermec
web site at www.intermec.com and click Support > Returns and Repairs >
Warranty.
Disclaimer of warranties: The sample code included in this document is
presented for reference only. The code does not necessarily represent
complete, tested programs. The code is provided “as is with all faults.” All
warranties are expressly disclaimed, including the implied warranties of
merchantability and fitness for a particular purpose.
Web Support
Visit the Intermec web site at www.intermec.com to download our current
manuals (in PDF). To order printed versions of the Intermec manuals,
contact your local Intermec representative or distributor.
Visit the Intermec technical knowledge base (Knowledge Central) at
intermec.custhelp.com to review technical information or to request
technical support for your Intermec product.
A caution alerts you to an operating procedure, practice, condition, or
statement that must be strictly observed to prevent equipment damage
or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Before You Begin
viii 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Telephone Support
These services are available from Intermec.
Outside the U.S.A. and Canada, contact your local Intermec representative.
To search for your local representative, from the Intermec web site, click
Contact.
Who Should Read This Manual
This document is written for the person who is responsible for installing,
configuring, and maintaining the 741 or 751 Mobile Computer.
This document provides you with information about the features of the
computer, and how to install, configure, operate, maintain, and
troubleshoot it.
Before you work with the computer, you should be familiar with your
network and general networking terms, such as IP address.
Related Documents
The Intermec web site at www.intermec.com contains our documents (as
PDF files) that you can download for free.
To download documents
1 Visit the Intermec web site at www.intermec.com.
2 Click Support > Manuals.
3 In the Select a Product field, choose the product whose documentation
you want to download.
Services Description
In the USA and Canada
call 1-800-755-5505 and
choose this option
Order Intermec
products
Place an order.
Ask about an existing order.
1 and then choose 2
Order Intermec media Order printer labels and ribbons. 1 and then choose 1
Order spare parts Order spare parts. 1 or 2 and then choose 4
Technical Support Talk to technical support about
your Intermec product.
2 and then choose 2
Service Get a return authorization
number for authorized service
center repair.
Request an on-site repair
technician.
2 and then choose 1
Service contracts Ask about an existing contract.
•Renew a contract.
Inquire about repair billing or
other service invoicing
questions.
1 or 2 and then choose 3
Before You Begin
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual ix
To order printed versions of the Intermec manuals, contact your local
Intermec representative or distributor.
Patent Information
Product is covered by one or more of the following patents:
4,882,476; 4,894,523; 4,953,113; 4,961,043; 4,970,379; 4,988,852;
5,019,699; 5,021,642; 5,038,024; 5,081,343; 5,095,197; 5,144,119;
5,144,121; 5,182,441; 5,187,355; 5,187,356; 5,195,183; 5,195,183;
5,195,183; 5,216,233; 5,216,550; 5,218,191; 5,227,614; 5,233,172;
5,241,488; 5,243,602; 5,258,606; 5,278,487; 5,288,985; 5,308,966;
5,322,991; 5,331,136; 5,331,580; 5,342,210; 5,349,678; 5,359,185;
5,371,858; 5,373,478; 5,389,770; 5,397,885; 5,410,141; 5,414,251;
5,416,463; 5,442,167; 5,464,972; 5,468,947; 5,468,950; 5,477,044;
5,486,689; 5,488,575; 5,500,516; 5,502,297; 5,504,367; 5,508,599;
5,514,858; 5,530,619; 5,534,684; 5,536,924; 5,539,191; 5,541,419;
5,548,108; 5,550,362; 5,550,364; 5,565,669; 5,567,925; 5,568,645;
5,572,007; 5,576,529; 5,592,512; 5,594,230; 5,598,007; 5,608,578;
5,616,909; 5,619,027; 5,627,360; 5,640,001; 5,657,317; 5,659,431;
5,671,436; 5,672,860; 5,684,290; 5,719,678; 5,729,003; 5,793,604;
5,742,041; 5,761,219; 5,764,798; 5,777,308; 5,777,309; 5,777,310;
5,786,583; 5,798,509; 5,798,513; 5,804,805; 5,805,807; 5,811,776;
5,811,777; 5,818,027; 5,821,523; 5,828,052; 5,831,819; 5,834,749;
5,834,753; 5,837,987; 5,841,121; 5,842,070; 5,844,222; 5,854,478;
5,862,267; 5,869,840; 5,873,070; 5,877,486; 5,878,395; 5,883,492;
5,883,493; 5,886,338; 5,889,386; 5,895,906; 5,898,162; 5,902,987;
5,902,988; 5,912,452; 5,923,022; 5,936,224; 5,949,056; 5,969,321;
5,969,326; 5,969,328; 5,979,768; 5,986,435; 5,987,192; 5,992,750;
6,003,775; 6,012,640; 6,016,960; 6,018,597; 6,024,289; 6,034,379;
6,036,093; 6,039,252; 6,064,763; 6,075,340; 6,095,422; 6,097,839;
6,102,289; 6,102,295; 6,109,528; 6,119,941; 6,128,414; 6,138,915;
6,149,061; 6,149,063; 6,152,370; 6,155,490; 6,158,661; 6,164,542;
6,164,545; 6,173,893; 6,195,053; 6,234,393; 6,234,395; 6,244,512;
6,249,008; 6,328,214; 6,330,975; 6,345,765; 6,356,949; 6,367,699;
6,375,075; 6,375,076; 6,431,451; 6,435,411; 6,484,944; 6,488,209;
6,497,368; 6,532,152; 6,538,413; 6,539,422; 6,621,942; 6,641,046;
6,681,994; 6,687,403; 6,688,523; 6,732,930; Des. 417445
Docking Station/Device: 5,052,943; 5,195,183; 5,317,691; 5,331,580;
5,544,010; 5,644,471There may be other U.S. and foreign patents
pending.
Before You Begin
x 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 1
1
Using the Computer
This chapter introduces the 741 and 751 Color Mobile Computer with
Windows Mobile 5.0. Throughout this manual, the computers are
referred to as 741, 751, or computer. This chapter contains hardware and
software configuration information to assist you in making the most out
of your computer.
751 Color Mobile Computers with an IEEE 802.11b/g radio installed are
Wi-Fi® certified for interoperability with other 802.11b/g wireless LAN
devices.
Chapter 1 — Using the Computer
2 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Using the Battery
If your computer shuts down because of a low battery condition, your
computer will not operate. The computer shuts down to make sure that
your data is protected. Although the battery protects the data against loss
for several hours, you should connect your computer to a power source
when you first detect a low battery condition.
Make sure you put the computer into a suspend (sleep) mode before
you remove the main battery.
If you have at least one device in your 741 or 751 (radio, scanner, or
imager), the battery power fail level is set so that after the system shuts
down in a low battery condition, there is still sufficient charge to allow the
unit to remain configured, keep proper time, and maintain DRAM
(Dynamic Random Access Memory) for at least 72 hours at room
temperature if the main battery remains in the computer.
The configuration and time are lost if:
The battery discharges beyond the battery power fail level.
The computer comes with a 14.4 Watt-hour, 7.2V, replaceable Lithium-ion
(Li-ion) battery. You must fully charge the main battery before you can use
the computer. When you change the main battery, a backup battery
maintains your status, memory, and real-time clock for at least 10 minutes.
To view the status of the battery
1 Tap Start > Settings > the System tab > Power.
2 Tap ok to exit.
Note: In addition to protecting data for up to 10 minutes, the internal
backup super capacitor shuts down the computer if the main battery is
removed from the computer. Depending on the processes running, it may
not have adequate power for a graceful shutdown. If so, the computer
performs a cold boot the next time you apply power.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 3
The battery is removed when the computer is not in suspend mode.
A cold-boot (reset) is performed on the computer.
You can increase the battery runtime by turning off the computer when not
in use.
To turn off the computer when not in use
1 Tap Start > Settings > the Systems tab > Power.
2 Tap the Advanced tab.
3 Under On battery power, check Turn off device if not used for.
4 From the drop-down list, select the number of minutes. You can choose
from 1 to 5 minutes.
5 Click ok to exit.
Installing and Charging the Battery
Make sure you fully charge the battery before you use your 741 or 751. To
charge the battery, you need to install it in the computer.
To install the battery
1 Remove the two thumb screws on the connector cover to release the
hand strap and back cover.
2 Slide the bottom of the strap forward to release it from the retaining
slot.
Thumb screws
Retaining slot
Chapter 1 — Using the Computer
4 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
3 Tilt, insert, and place the battery into the compartment. Make sure the
battery compartment latch clicks in place to ensure the battery is secure.
4 Insert your 741 or 751 into its single dock for charging.
5 Charge the battery pack for three hours before using.
Removing the Battery
Follow these instructions to remove the battery from the computer.
To remove the battery
1 Press the On/Off (I/O) key to suspend the computer.
Battery compartment latch
Battery compartment
Battery pack
You must use only the Intermec power supply approved for use with the
computer. Using any other power supply will damage the computer.
Note: For help installing and using the single dock, see the 700 Series Single
Dock Quick Start Guide (P/N 962-040-009) shipped with the dock.
Only use the battery compartment latch to dislodge and remove the
battery. Using any other tool or method to remove the battery may
damage the battery or the 741 or 751.
Removing the main battery when the backup battery low icon appears
on the status bar may cause your computer to cold boot and you may
lose data.
If you fail to replace the battery immediately, you may lose important
data or applications.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 5
2 Pull up on the battery compartment latch, and then lift the battery out
of the battery compartment.
Understanding the Ambient Light Sensor
The ambient light sensor turns on the display lighting when conditions
warrant but automatically turns it off again as surrounding light increases.
The sensor helps conserves your battery power.
S
To adjust the ambient light sensor
1 Tap Start > Settings > the System tab > Backlight.
2 Tap the Both Power tab.
Battery compartment latch
Battery compartment
Battery pack
Ambient Light
Sensor
Chapter 1 — Using the Computer
6 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
3 Make your selections, and then tap OK to exit.
Understanding the Audio System
The audio system consists of the speaker, internal microphone, and the
external headset jack.
Locating the Speaker
The speaker, which is capable of variable volume levels, is located on the
back of the 741 and 751. This speaker has a transducer volume of 85 dB
min at 10 cm (3.9 in) and a frequency range of 1 to 8 KHz.
Locating the Microphone
The built-in microphone is located on the bottom of the unit next to the
Hirose docking connector.
Microphone Location on the Computer
Speaker
Do not place the speaker next to your ear when the speaker volume is
set to “Loud” (maximum), or you may damage your hearing.
Hirose docking connector
Microphone
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 7
Locating the External Headset Jack
The external headset jack connects a mobile phone style headset to the
computer for use in noisy environments. The jack is a 2.5 mm, three-
conductor jack. When you insert a headset into the external jack, the
internal speaker and microphone are disabled. The external headset jack is
located on the bottom of the computer next to the Hirose docking
connector.
External Headset Jack Location on the Computer
Adjusting the Beeper Volume
You can adjust the computer volume for your needs and your environment.
The volume includes sounds you hear when you tap the screen or scan bar
codes with a scanner. You can set the volume to off, low, medium, high, and
very high (default). Use the following table to understand the different ways
to adjust the volume.
To enable the beeper
1 Tap Start > Settings > the System tab > Intermec Settings.
2 Go to Device Settings > Beeper > Volume.
Hirose docking connector
External headset jack
Note: Each time you perform a cold boot on the 741 or 751, all default
settings are restored.
Changing the Beeper Volume
Way to Adjust Volume Procedure
Tap the Speaker ( ) icon in
the navigation bar.
Use the stylus to move the speaker slider up or down.
You can also turn the volume on or off and choose to use
vibrate mode.
Use Intermec Settings. From the Start menu, choose Settings, select the System
tab, and then tap Intermec Settings. Go to Device
Settings > Beeper > Volume.
Note: For detailed information on the commands available in Intermec
Settings, see the Intermec Computer Command Reference Manual (P/N
073529) available from the Intermec web site.
Chapter 1 — Using the Computer
8 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
3 Tap Low, Medium, High, or Very high and save your changes.
The computer has a built-in vibrate feature that enables you to receive
scanner feedback despite the noise level. When enabled, the computer
vibrates when the scanner performs a good read.
To enable the vibrate feature
1 Tap Start > Settings > the System tab > Intermec Settings.
2 Tap Device Settings > Good Read > Internal Scanner > Beep or
Vibrate > Vibrate.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 9
Using the Keypad
Your 741 and 751 mobile computer has one of the following keypad
options:
22-key numeric keypad
39-key alphanumeric keypad
Use the following sections to understand how to use the keypad. For
information on remapping the keypad, you can download the Device IDL
Resource Kit from the Intermec web site at www.intermec.com/idl.
Adjusting the Backlight for the Keypad
You can configure your keypad to turn on a backlight to assist you when
you are working in low lighting.
To adjust the backlight for the keypad
1 Tap Start > Settings > the System tab > Backlight.
2 Tap the right arrow to move to and tap the Keyboard tab.
3 Make your selection and then tap ok.
Gold, Gold/White
Plane key
On/Off key
Alpha key
Numeric keypad
Alphanumeric keypad
Navigation keys
Chapter 1 — Using the Computer
10 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Entering Key Sequences
Use the following key sequences to enter characters into your computer
using the numeric keypad.
Using Orange or Orange/White Plane Keys
The orange plane key (numeric keypad) or the orange/white plane key
(alphanumeric keypad) provides you access to display controls, special
characters, and Windows Mobile options.
Press the orange ( ) or the orange/white (c) plane key for each orange
key stroke you wish to make. For example, to turn on the front light, press
and hold the orange key plus the key. To turn the front light off, press
these keys again.
The following table lists sequences that use the orange plane key. See
“Understanding Windows Mobile” on page 19 for information about
Windows Mobile applications.
Orange Plane Key Sequence
Note: You can configure the A1, A2, A3, and A4 functions to launch
Windows Mobile applications or custom applications in the App Launch
portion of the Utilities application. Go to Start > Settings > the System tab
> Utilities > the App Launch tab.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 11
The following table lists sequences that use the orange/white (c) plane
key. See “Understanding Windows Mobile” on page 19 for information
about the Windows Mobile applications.
Using the Green Plane Keys
You can enter the alphabet using the green (Alpha) plane keys on numeric
keypads. Below and on the next page are the key sequences.
When you press the green key, the Scanning/Alpha LED ( ) shows red
for the Alpha mode. The keypad stays in Alpha mode until you press the
green key again.
To type a lowercase “c,” press green . To type a letter on
the same key as the last letter entered, wait two seconds, then enter the
correct series of keystrokes to create the next letter.
While in the Alpha mode and you press to initiate the CAPS mode,
you will render a CAPS LOCK until you press again. Once you are
in CAPS mode, you stay in CAPS until it is pressed again. Press to
enter a space.
Orange/White Plane Key Sequences
Press the Keys To Do This
c I Toggle the backlight on or off. You can also go through the
backlight power levels by holding the keys down.
c A Launch a Windows Mobile application or custom application.
c B Launch a Windows Mobile application or custom application.
c C Launch a Windows Mobile application or custom application.
c D Launch a Windows Mobile application or custom application.
c J Move up one page.
c G Enter an asterisk (*).
c P Move down one page.
c E Access the Windows Mobile Start menu.
c K Enter an at (@) symbol.
c H Enter a backslash (/).
c L Enter a minus sign (-).
c R Enter a plus sign (+).
c l Tab to the right.
c j Tab to the left.
c k Increase volume.
c m Decrease volume.
Note: You can configure the A1, A2, A3, and A4 functions to launch
Windows Mobile applications or custom applications in the App Launch
portion of the Utilities application. Go to Start > Settings > the System tab
> Utilities > the App Launch tab.
Chapter 1 — Using the Computer
12 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Green Plane Key Sequences
Using the Alpha Plane Keys
When you press d, the Scanning/Alpha LED ( ) is red to indicate
Alpha mode on the alphanumeric keypad. The keypad stays in Alpha mode
until you press d again. If you want to type a lowercase c, press d C. If
you want to type an uppercase C, press and hold the g key and then press
C. Press b to enter a space.
Alpha Plane Key Sequences
To Enter Press These Keys To Enter Press These Keys
a d A A d g A
b d B B d g B
c d C C d g C
d d D D d g D
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 13
Using the Touch Screen
The computer has a color touch screen display. The screen is a Quarter
VGA display with 240 x 320 pixels. The default Today screen has three
distinct areas: the Navigation bar, the Today screen, and the Command bar.
The Windows Mobile Today Screen
e d E E d g E
f d F F d g F
g d G G d g G
h d H H d g H
i d I I d g I
j d J J d g J
k d K K d g K
l d L L d g L
m d M M d g M
n d N N d g N
o d O O d g O
p d P P d g P
q d Q Q d g Q
r d R R d g R
s d S S d g S
t d T T d g T
u d U U d g U
v d V V d g V
w d W W d g W
x d X X d g X
y d Y Y d g Y
z d Z Z d g Z
Alpha Plane Key Sequences (continued)
To Enter Press These Keys To Enter Press These Keys
Navigation bar
Today screen
Command bar
Chapter 1 — Using the Computer
14 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
See Chapter 2, “Understanding Windows Mobile for more information
on using Windows Mobile.
If you have TE 2000 loaded on your computer, you will not see the Today
screen. After the computer finishes the initial booting sequence, the TE
2000 screen appears. For help using TE 2000 terminal emulation, see the
TE 2000 Terminal Emulation Programmers Guide (P/N 977-055-xxx).
Using the Stylus
Your computer has a stylus for selecting items and entering information on
the touch screen.
Understanding the Screen Icons
Use the screen icons on the Navigation bar and the Command bar to see
the battery status, network connections, and so on. Some standard
Microsoft icons are included in this table.
Functions You Can Perform With the Stylus
Action Description
Tap Touch the screen once with the stylus to select options, open or
close applications, or launch menus from the taskbar.
Drag Hold the stylus on the screen and drag across the screen to select
text and images.
Tap and hold Tap and hold the stylus on an item to see a menu of actions
available for that item. On the pop-up menu that appears, tap
the action you want to perform.
Computer Screen Icons
Icon Description
The battery is full.
The battery is low. You need to replace or charge the battery very
soon.
The battery is charging.
The volume is turned off. To turn the volume back on, tap this
icon and choose your setting.
The computer is connected to the network.
The computer is not connected to the network.
The 802.11b/g radio is connected to the wireless network.
The computer is connected through the USB port to your desktop
PC.
The iConnect application icon. Tap it to set up Ethernet or
Wireless settings.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 15
Aligning the Touch Screen
If the touch screen does not respond when you tap it with the stylus, you
may need to calibrate the screen.
To calibrate the touch screen
1 Tap Start > Settings > the Systems tab > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
If the touch screen is so out of alignment that you cannot open the Start
menu, you may need to perform a clean boot. After the computer clean
boots, it prompts you to align the screen. For more information about
performing a clean boot, see “Clean Booting the Computer” on page 80.
Understanding the LEDs
The LEDs on the computer turn on to indicate the status of the battery, a
good read by the scanner, a shifted key, or a notification.
The battery status LED (B) and the scanning/keypad shift and
notification LED (C) turn red, green, or yellow to indicate the status of
the battery, scanner information, and the mode of the keypad.
Battery status
LED
Scanning, keypad
shift, and notification
LED
Battery Status LED
LED Color and Action Description
Steady green Battery is more than 95% charged and the computer is on the charger.
Blinking red Battery is low. The blinking speed increases as the battery power lowers.
Red Main battery is low; or if charging, remains red until your computer reaches a 95%
charge status.
Yellow The computer is on a charging source and there is no battery pack installed. The
computer may also be out of the charging range of 0° to 50° C (32° to 122° F).
When the computer is back in charging range, charging resumes and the LED
changes to red or green.
Alternating Red/Yellow Replace the battery pack.
Chapter 1 — Using the Computer
16 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Scanning Bar Codes
Use the internal scanner to scan and enter bar code data. The type of
scanner you are using and the type of bar code you are decoding determines
the way you scan the bar code. The computer supports the scanning of 1D
linear bar codes and 2D images, depending on the scanner model you chose
to purchase. Plus, if you are using an integrated handle or a scanner
attached to the serial port, the way you scan bar codes is different.
When you unpack the computer, these bar code symbologies are enabled:
Code 39
Code 128
PDF417 (if supported)
•UPC/EAN
DataMatrix (area imagers only)
If you are using bar code labels that are encoded in a different symbology,
you need to enable the symbology on the computer. Use Intermec Settings
to enable and disable symbologies for your scanner. For help using Intermec
Settings, see “Configuring the Computer With Intermec Settings” on
page 38.
For information on scanner reading distances, see “Scanner Reading
Distances” on page 90. The following two sections describe how to scan a
bar code label with the laser scanner (EL10), linear imager (EV10), and area
imager (EA11).
Scanning With the Laser Scanner or Linear Imager
If your computer has a standard range laser or a linear imager, use the
following procedure to practice scanning a bar code. The linear imager can
decode PDF417 bar codes as well as bar codes with high-density, low-
density, and poor quality in any lighting conditions. For help scanning
PDF417 bar codes, see the procedure on the next page.
Scanning/Keypad Shift and Notification LED
LED Color and Action Description
Momentary green Indicates a good scan.
Blinking green Indicates the scanner is initializing.
Steady red Indicates the keypad is shifted to Alpha (green) and the computer is turned on.
Yellow When the keypad is in alpha mode, the LED temporarily switches from red to yellow to
indicate a good scan. The yellow LED also indicates a Calendar or Task activity.
Do not look directly into the window area or at a reflection of the laser
beam while the laser is scanning. Long-term exposure to the laser beam
can damage your vision.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 17
To scan bar code labels with the laser scanner or linear imager
1 Press I/O to turn on the computer.
2 Point the scanner window at the bar code label and hold the computer
at a slight angle 15 to 25 cm (6 to 10 in) from the label.
3 Press either side Scan button, or pull the trigger on a handle, and direct
the red beam so that it falls across all bars in the bar code label.
Use this test bar code:
Code 39 Test Bar Code
*123456*
*123456*
When the computer successfully reads a bar code label, you hear a high
beep and the green Scanning LED turns on briefly.
4 Release the side Scan button or the trigger.
To scan a PDF417 or Micro PDF417 bar code with the linear imager
1 Press I/O to turn on the computer.
2 Point the scanner window at the PDF417 or Micro PDF417 bar code
label and hold the computer at a slight angle 15 to 25 cm (6 to 10 in)
from the label.
3 Press either side Scan button, or pull the trigger on a handle, and direct
the red beam so that it falls across the top row of the bar code label.
Use this test bar code:
PDF417 Test Bar Code
*123456789abcdefg*
4 Move the beam down all rows of the bar code label. The computer
clicks as it reads each row.
5 The computer emits a high beep and the Scanning LED turns on briefly
when the computer successfully reads the entire bar code label.
6 Release the side Scan button or the trigger.
Scanning With an Area Imager
If the computer has an area imager, use the following procedure to practice
scanning a bar code. The area imager lets you scan 2D bar code
symbologies and supports omni-directional (360°) scanning. Omni-
directional scanning means that you can position the computer in any
orientation to scan a bar code label. Using the area imager is very similar to
taking a picture with a digital camera.
Chapter 1 — Using the Computer
18 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
To scan a bar code label with the area imager
1 Press I/O to turn on the computer.
2 Point the scanner window at the bar code label and hold the computer
steady a few inches from the label.
3 Press one of the side Scan buttons, or pull the trigger on a handle, and
center the red aiming beam over the bar code label.
The imager flashes repeatedly while it is trying to read a bar code. The
aiming beam is smaller when the imager is closer to the bar code and
larger when it is further away.
When the computer successfully reads a bar code label, you hear a high
beep and the green Scanning LED turns on briefly.
4 Release the side Scan button or the trigger.
If you experience problems scanning a bar code with the area imager, try
following some of these tips to improve the performance of your imager.
Choose a Predefined Mode in Intermec Settings:
a Tap Start > Settings > the System tab > Intermec Settings.
b Ta p Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options.
Keep your hand as steady as possible while scanning a label.
Position the imager as close to the bar code as possible while still being
able to capture the entire bar code.
Enable only the bar code symbologies that you need to use every day.
Attaching a Scanner to the Serial Port
You can attach a scanner to the serial port of the computer if you order a
700 Series Tethered Scanner Adapter and RS-232 cable (P/N 3-604032-
16). After you install the adapter with two thumbscrews, you can easily
connect tethered bar code scanners to the end of your computer.
Predefined Mode Select if You Are Scanning:
1D only 1D labels.
1D and 2D Standard all types of bar code labels.
1D and 2D Bright Environment in high ambient light, such as outdoors in
the sunshine.
1D and 2D Reflective Surface glossy labels.
Custom in conditions that require customized
settings. For more information on the
customized settings, see the Intermec
Computer Command Reference Manual
available from Intermec web site at
www.intermec.com.
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 19
You can use the following scanner models with the tethered scanner
adapter:
1551E
1553E
•ASCII
SR60
For information on configuring the tethered scanner, see the
documentation that came with the scanner.
You can also attach Bluetooth scanners, such as the SF51 and the SR61, to
the computer. For more information, see “Configuring the Computer to
Communicate With a Wireless Scanner” on page 41.
Installing a Storage Card
The 741 supports the use of CompactFlash cards and Secure Digital (SD)
cards. The 751 does not support the use of SD cards because the 802.11
radio occupies the CompactFlash card slot.
To access the SD card slots
1 Locate the access door at the top of the computer and loosen the two
screws.
2 Lift the storage media access door away from the computer. You can
now insert storage cards into the computer.
This illustration shows the top of the computer. Note the keypad is facing downward.
Note: MultiMediaCards (MMCs) are not supported.
Storage media access door
CompactFlash card slot
SD card slot
Chapter 1 — Using the Computer
20 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Attaching a Tab to the SD Card
The SD card, as ordered from Intermec, come with acrylic adhesive pull
tabs. If you are using a storage card that you plan to remove from the
computer, this tab can make its removal easier.
Do the following to attach the tab to your storage card. Note that the pull
tab has divots cut into either side, towards the shorter end. Use these divots
as a guide.
To attach a tab to the SD card
1 Completely peel the paper off the short end of the tab. Partially pull the
paper off the long end of the tab away from the divots. Fold the short
end under, at the divots, to stick to itself.
2 Align the folded edge of the pull tab where there is no adhesive with the
bottom end of the storage card. Peel away the rest of the paper from the
long end, then firmly press down the remaining adhesive area of the tab
onto the storage card.
3 Insert the storage card, with the contacts facing the keypad, into your
computer to ensure that no adhesive is exposed once the tab is placed.
4 Press on the storage card until you hear a click. If necessary, you can
reattach the storage media access door.
Accessing Files Stored on the SD Card
When inserted in the computer, the SD card appears as the “\SDMMC
Disk” folder. To access this folder, select My Computer, then tap the
“\SDMMC Disk” folder.
Short end of pull tab
Fold line at divotsLong end of pull tab
Align the folded end with this edge of the storage card
Keypad facing down
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 21
Removing the SD Card
1 Press and hold the Power key for a few seconds, and then release the
Power key to turn off the computer. Remove the storage media access
door.
2 Gently press the SD card to release the card, and then pull the card out
of the computer.
3 Replace the storage media access door.
4 Press the Power key for two to three seconds, and then release the
Power key to turn on the computer.
Chapter 1 — Using the Computer
22 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 23
2
Understanding Windows
Mobile 5.0
This chapter introduces Microsoft Windows Mobile 5.0 for Pocket PC. In
this chapter you will find these sections:
Understanding Windows Mobile 5.0
Finding Information in Windows Mobile
Learning the Basic Skills
Using Microsoft ActiveSync
Using Internet Explorer Mobile
Chapter 2 — Understanding Windows Mobile 5.0
24 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
Understanding Windows Mobile 5.0
This chapter introduces Microsoft Windows Mobile 5.0. While using the
computer, keep these key points in mind:
•Tap Start on the navigation bar, located at the top of the screen, to
quickly move to programs, files, and settings. Use the command bar at
the bottom of the screen to perform tasks in programs. The command
bar includes menus, icons, and the onscreen keyboard.
Tap and hold an item to see a pop-up menu containing a list of actions
you can perform. Pop-up menus give you quick and easy access to the
most common actions.
•Tap Start > Help, and then select a topic on your computer to find
additional information on Windows Mobile components.
Microsoft Windows Mobile 5.0 contains these standard Office Mobile
programs:
•Word Mobile
•Excel Mobile
PowerPoint Mobile
Finding Information in Windows Mobile
This section describes how to find Windows Mobile information on your
computer.
Use these URLs for additional information about Microsoft Windows
Mobile:
msdn2.microsoft.com/en-us/support/default.aspx
support.microsoft.com/
Finding Information in Windows Mobile
For Information On: See This Source:
Programs on the computer. This chapter and the computer help.To view help, tap Start
> Help and then select a topic.
Additional programs you
can install on the computer.
The Windows Mobile Companion CD.
Connecting to and
synchronizing with a
desktop.
The ActiveSync help on your desktop. To view Help, click
Help > Microsoft ActiveSync Help.
Last-minute updates and
detailed technical
information.
The readme files located in the Microsoft ActiveSync folder
on the desktop and on the Windows Mobile Companion CD.
Up-to-date information on
Windows Mobile.
www.microsoft.com/windowsmobile/resources/
communities/default.mspx
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 25
http://msdn.microsoft.com/newsgroups/
And, most importantly, the Intermec front-line support personnel can help
assist you work with many of the Windows Mobile and technologies that
you find on the computer. See “Global Services and Support” on page vi
for more information.
Learning the Basic Skills
Learning to use the computer is easy. This section describes the basic
concepts of using and customizing your computer.
Using the Today Screen
When you turn on your computer for the first time each day, you see the
Today screen. You can also display it by tapping Start > To d a y . On the
Today screen, you can see important information for the day.
To customize what displays on the Today screen
•Tap Start > Settings > the Personal tab > To d a y > the Items tab.
Status icons display information such as when the computer is connected to
the network or to the Internet. You can tap an icon to open the associated
setting or program.
Accessing Programs
You can switch from one program to another by selecting it from the Start
menu. You can customize which programs you see on this menu. For
information, see Adjusting Settings” on page 32.
Chapter 2 — Understanding Windows Mobile 5.0
26 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
To access programs
•Tap Start > Programs and then tap the program name.
The following list contains some of the programs on your computer. Look
on the Windows Mobile Companion CD for additional programs that you
can install onto your computer.
ActiveSync
•Excel Mobile
PowerPoint Mobile
•Word Mobile
Using the Navigation Bar and the Command Bar
The navigation bar is located at the top of the screen. It displays the active
program and current time, and it allows you to switch between programs
and close screens.
Windows Mobile Navigation Bar
The command bar is located at the bottom of the screen. Use the command
bar to perform tasks in programs. The command bar includes menu names,
functions, and the Input Panel icon when needed.
Windows Mobile Command Bar
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 27
Using Pop-Up Menus
Use pop-up menus to quickly perform an action on an item. For example,
you can use a pop-up menu to delete or make a copy of an item. To access a
pop-up menu, tap and hold the item on which you want to perform the
action. When the menu appears, tap the action you want to perform, or tap
anywhere outside the menu to close the menu without performing the
action.
Entering Information
You can enter information on your computer in several ways depending on
the program you are using.
Use the input panel to enter information in any program on your
computer. You can either type using the onscreen keyboard or write using
Block Recognizer, Letter Recognizer, or Transcriber. In any case, the
characters appear as typed text on the screen.
To show or hide the input panel
1 Tap the Input Panel icon ( ).
2 Tap the arrow next to the Input Panel icon to see your choices.
When you use the input panel, your computer anticipates the word you are
typing or writing and displays it above the input panel. When you tap the
displayed word, it is inserted into your text at the insertion point. The more
you use the computer, the more it learns to anticipate what you are going to
do.
Understanding the Ways to Enter Information
Enter Information By: Do This:
Synchronizing Use Microsoft ActiveSync to synchronize or copy information
between your desktop PC and the computer. For more
information on ActiveSync, see Microsoft ActiveSync Help
on your desktop PC.
Typing Enter typed text into the computer by tapping keys on the
onscreen keyboard or by using the handwriting recognition
software.
Writing Use the stylus to write directly on the screen.
Drawing Use the stylus to draw directly on the screen.
Recording Create a stand-alone recording or embed a recording into a
document or note.
Chapter 2 — Understanding Windows Mobile 5.0
28 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
To change word suggestion options, such as the number of words suggested
at one time, tap Start > Settings > the Personal tab > Input > the Word
Completion tab.
Typing With the Onscreen Keyboard
Tap the input panel arrow, and then tap Keyboard. On the soft keyboard
that displays, tap the keys with your stylus.
To type lowercase letters, tap the keys with the stylus.
To type a single uppercase letter or symbol, tap the Shift key. To tap
multiple uppercase letter or symbols, tap the CAP key.
To use larger keys
1 Tap the input panel arrow and then tap Options.
2 On the Input Method tab, select Large keys.
Using Block Recognizer
Character recognition software gives you a fast and easy method for
entering information in any program on the computer. Letters, numbers,
and punctuation you write are translated into typed text.
To use Block Recognizer
1 Tap the input panel arrow and then tap Block Recognizer.
2 Write a letter in the box. In converts to typed text that appears on the
screen.
For specific instructions on using Block Recognizer, tap the question mark
next to the writing area.
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 29
Using Transcriber
With Transcriber, you can write anywhere on the screen using the stylus
just as you would on paper. Unlike Letter Recognizer and Clock
Recognizer, you can write an entire sentence of information.
To use Transcriber
1 Tap the input panel arrow and then tap Tra ns cr ib er.
2 Tap ok.
3 Write anywhere on the screen. Pause and let Transcriber change the
written characters into typed characters.
For help using Transcriber, tap the question mark in the lower right-hand
corner of the screen.
Selecting Typed Text
If you want to edit or format typed text, you must select it first.
To select typed text
1 Drag the stylus across the text you want to select.
2 Double-tap text or drag the stylus across text you want to select.
3 Do one of the following:
a Tap and hold the stylus on the text to bring up the pop-up menu
and select a command.
b Select a command by tapping Menu from the command bar.
Writing on the Screen
In any program that accepts writing, such as the Notes program, you can
use your stylus to write directly on the screen. Write the way you do on
paper. You can edit and format what you have written and convert the
information to text in the future.
To convert the writing to text
1 Write your information on the screen with the stylus.
Chapter 2 — Understanding Windows Mobile 5.0
30 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
2 Tap Menu > Tools > Recognize. Your writing is converted to text.
Notifications
When you have something to do, your computer can notify you in a variety
of ways. For example, if you have set up an appointment in Calendar, you
can be notified in any of the following ways:
A message box appears on the screen.
A sound, which you can specify, plays.
A light flashes on your computer.
The computer vibrates.
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 31
To choose how you are notified
1 Tap Start > Settings > Sounds & Notifications > the Notifications
tab.
2 Choose your settings and then click ok.
Finding and Organizing Information
You can use File Explorer to find files on your computer and organize these
files into folders.
To open File Explorer
•Tap Start > Programs > File Explorer.
Once you open File Explorer, it becomes available from Start menu.
Chapter 2 — Understanding Windows Mobile 5.0
32 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
Customizing the Computer
You can customize your computer by adjusting settings and by adding or
removing programs.
Adjusting Settings
You can adjust the computer settings to suit the way you work.
To view the Settings options
•Tap Start > Settings > either the Personal tab or the System tab.
You might want to adjust settings on the following screens.
Adding or Removing Programs
Programs added to your computer at the factory are stored in ROM (Read
Only Memory). You cannot remove this software, and you cannot
accidentally lose ROM contents. Applications added to your computer go
into the Object Store, which is located in Flash ROM. See “Installing
Applications” on page 68 for more information about the Object Store.
Adjustable Settings on the Computer
Setting Why Adjust It?
Menus To customize what appears on the Start menu.
Owner Information To enter your contact information.
Lock To limit access to the computer.
To d ay To customize the look and information that displays on the
Today screen.
Clock & Alarms To change the time or to set alarms.
Power To maximize battery life.
You can view the status of the backup battery and determine the
length of time it takes for the computer to turn off if not used.
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 33
You can install any program created for the 741 or 751 mobile computer, as
long as there is enough memory. A popular place to find software for your
computer is on the Windows Mobile Web site (www.microsoft.com/
windowsmobile/resources/communities/default.mspx).
Using Microsoft ActiveSync
Use Microsoft ActiveSync to synchronize the information on your desktop
with the information on the computer. Synchronization compares the data
on the computer with your desktop PC and updates both computers with
the most recent information.
You can also perform these functions with ActiveSync:
Copy files between the computer and the desktop.
Back up and restore the computer data.
Control when synchronization occurs by selecting a synchronization
mode.
Select which information types are synchronized and control how much
data is synchronized.
To use ActiveSync
1 Insert the computer into communications dock attached to your PC
with a USB cable.
2 Install ActiveSync on your desktop. ActiveSync is available from the
Windows Mobile Companion CD or from the Microsoft web site.
ActiveSync is already installed on the computer.
After installation, ActiveSync automatically launches the ActiveSync
Setup Wizard.
3 Follow the screens of the ActiveSync Setup Wizard to complete the
synchronization process. The wizard helps you connect to the computer,
set up a partnership for synchronization, and customizes
synchronization settings.
The synchronization process automatically begins when you finish the
wizard.
4 Disconnect the computer from your desktop and go to work.
Once you have set up ActiveSync and completed the first synchronization
process, you can initiate synchronization from your computer.
Note: By default, ActiveSync does not automatically synchronize all types
of information. Use ActiveSync options to turn synchronization on or off
for specific information types.
Chapter 2 — Understanding Windows Mobile 5.0
34 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
To open ActiveSync on your computer
For more information about ActiveSync on your computer, open
ActiveSync and tap Start > Help.
Using Internet Explorer Mobile
You can use Internet Explorer Mobile to run web-based applications, and
view pages downloaded to the computer. You can also connect to the
Internet through an ISP or a network connection and browse the Web.
You can make connections using a modem, a wireless network, or an
Ethernet connection. You can use a modem connection to set up
connections with an external modem.
To use Internet Explorer
1 Set up a connection to your ISP or corporate network by going to Start
> Settings > the Connections tab > Connections. Use the Connections
Help to understand the process you need to go through to set up a
connection.
2 Tap Start > Internet Explorer. The default page that appears when you
open Internet Explorer contains links to Intermec-specific information
and to the Windows Mobile web site.
•Tap Start > Programs > ActiveSync. ActiveSync opens and shows you the
synchronization status.
Chapter 2 — Understanding Windows Mobile 5.0
741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual 35
Default Internet Explorer Web Page
Chapter 2 — Understanding Windows Mobile 5.0
36 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 37
3
Configuring the Computer
Use this chapter to understand how to configure the 741 and 751 to
communicate in your network. In this chapter, you will find these
sections:
Configuring the Computer Operating Parameters
Configuring Personal Area Networks
Configuring Local Area Networks
Configuring Security
Chapter 3 — Configuring the Computer
38 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Configuring the Computer Parameters
You can configure many parameters on the computer, such as the bar code
symbologies it decodes or the network settings. These characteristics are
controlled by configuration parameters. The values you set for these
configuration parameters determine how the computer operates. Use
configuration commands to configure the 741 and 751.
Configuring the Computer With Intermec Settings
Use Intermec Settings to configure the computer and view system
information. You can access Intermec Settings while running any
application.
For detailed information on most of the commands available in Intermec
Settings, see the Intermec Computer Command Reference Manual (P/N
073529). The Intermec Computer Command Reference Manual is available
from the Intermec web site.
To open Intermec Settings
•Tap Start > Settings > the System tab > Intermec Settings.
Navigating in Intermec Settings
To Do This Function Do This
Select a command. Tap the command.
Press m or k.
Expand a command. Tap the command.
Press j or l.
Select text in a text box. Tap in the text box and drag the stylus over the text.
Save your settings. Tap File > Save Settings or tap the disk icon ( ).
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 39
Remotely Configuring the Computer Using SmartSystems Foundation
The SmartSystems™ server lets you manage all of your SmartSystems-
enabled devices at the same time from a central host PC. The mobile
computer ships with the SmartSystems client, which means it is
SmartSystems enabled. The SmartSystems server has a console that displays
all of the computers in your network. In the console, you can right-click a
computer and a menu appears. To configure the computer, choose
Intermec Settings from the menu.
The SmartSystems server and console are part of SmartSystems Foundation
and are available from the Intermec web site. To download SmartSystems
Foundation, go to www.intermec.com/SmartSystems. For information on
how to use the SmartSystems server, see the online manual.
Synchronizing the Computer System Time with a Time Server
It is important that the time on all of your computers be synchronized with
a network time server to ensure real-time communications and updates.
Network time servers acquire Coordinated Universal Time (UTC) from an
outside source such as the U.S. Naval Observatory (USNO). The 741 and
751 use Simple Network Time Protocol (SNTP) to synchronize with a
network time server.
The default reference time server is the USNO (tock.usno.navy.mil). To
synchronize the time on your computer with this time server, you must
have a valid connection to the Internet. You can also synchronize the
computer system time with a corporate network server within your firewall
that is SNTP-capable. To use an internal corporate network server, you
need to set the command name in the registry.
Configuring Personal Area Networks
Bluetooth™ is a technology standard that uses short-range radio links,
intended to replace cable s connecting portable and fixed electronic devices.
The key features of Bluetooth are robustness, low complexity, low power,
and low cost. The technology offers wireless access to LANs, the mobile
phone network, and mobile computers.
You can also print wirelessly by using Microsoft APIs, including Bluetooth
extensions for Winsock and Bluetooth virtual COM ports. Information
about other Bluetooth software is in the Bluetooth Resource Kit and the
Bluetooth Resource Kit Users Guide which is part of the Intermec Developer
Library (IDL). The IDL is available as a download from the Intermec web
site at www.intermec.com/idl.
You can send and receive information to a Bluetooth device wirelessly using
the Bluetooth radio in the computer.
You can use the Bluetooth radio to perform these wireless activities:
Print to a Bluetooth printer
Chapter 3 — Configuring the Computer
40 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Connect to a Bluetooth scanner
The Bluetooth radio is disabled by default. You must turn on the Bluetooth
radio before you can discover and connect to other remote devices.
To turn the Bluetooth radio on
1 Tap Start > Settings > the Connections tab > Bluetooth.
2 Tap Turn on Bluetooth.
3 (Optional) Tap Make this device visible to other devices if you want
your computer to be discoverable by other Bluetooth devices.
4 Click ok.
Once Bluetooth is enabled, it stays enabled through a warm or cold boot
and maintains virtual COM ports (such as printing) registration. However,
you must reactivate connections because these are not done automatically.
You can also use Intermec Settings to turn on the radio and enable
Bluetooth settings. Use this table to understand the settings you see in the
Bluetooth menu in Intermec Settings.
Bluetooth Settings
Setting Description
Power Set and view whether the Bluetooth radio is on or off.
Discoverable Allows other Bluetooth devices to be able to discover the
computer during a device discovery.
Connectable Allows other Bluetooth devices to connect to your computer.
Class of Device Determines how the device appears to other devices during
discovery.
IBT Displays the version of the Intermec Bluetooth Library.
Radio Displays the version of the Bluetooth Radio Hardware.
Device Address Displays the Bluetooth address of your computer.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 41
Configuring the Computer to Communicate With a Wireless Scanner
This section explains how to configure the computer to communicate with
Bluetooth wireless scanners. The computer ships with a Bluetooth
association label attached to the left side. Scan the association label to
quickly connect the computer to the Bluetooth wireless scanner, such as the
SF51 or SR61.
If for some reason the Bluetooth association label does not work, you can
follow the procedure for configuring the computer from Intermec Settings
at the end of this section.
To configure Bluetooth communications on the computer
1 Select Start > Settings > the System tab > Intermec Settings.
2 Select Communications > Bluetooth.
3 If you want to allow incoming connections from wireless scanners, you
must enable these two parameters:
Discoverable
Connectable
If you do not want to allow incoming connections, make sure both
parameters are disabled.
4 Save your changes and exit Intermec Settings.
To connect to the wireless scanner using the association label
1 Using your wireless scanner, scan the Bluetooth association label on the
side of the computer.
2 The computer prompts you to enter the passcode for your scanner. The
default passcode for Intermec Bluetooth scanners is 0000.
3 Tap Finish.
To connect to the wireless scanner using Intermec Settings
4 Select the scanner you want to connect to from the Devices list and then
tap Next.
5 When prompted to add the scanner to your device list, tap Yes.
6 In the Passcode text box, enter the passcode for your scanner. The
default passcode for Intermec Bluetooth scanners is 0000.
7 Tap Next. The computer connects to the scanner and displays the
remote device information.
8 Tap Finish.
1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard.
2 Tap Add Device. The wizard advances to the next screen.
3 Select how you would like to set your scanner (the default is Search)
and then click Next. The computer starts discovering scanners.
Chapter 3 — Configuring the Computer
42 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
9 Refresh Intermec Settings to see the Bluetooth scanner under Data
Collection. You can now view and modify any symbology settings.
To remove a wireless scanner from the computer
1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard.
2 Tap Remove Device.
3 Select the Bluetooth scanner from the DCE Device(s) list that you want
to disconnect and then tap Disconnect.
The scanner you wanted to remove no longer appears in the list.
4 Tap Finish.
Configuring Bluetooth Communications for Wireless Printing
This section explains how to configure the computer for Bluetooth wireless
printing. You need to:
make sure Bluetooth power is on. For help, see the procedure in
“Configuring Personal Area Networks” on page 39.
create an application that lets you print. For help, see the next section.
select the current wireless printer on the computer. For help, see
“Selecting the Current Wireless Printer on the Computer” on page 43.
Creating an Application That Lets You Print Wirelessly
The computer does not ship with an application that lets you print
wirelessly. You must create an application that opens the wireless printing
COM port on the computer. For help, see the Bluetooth Resource Kit.
The Wireless Printing application is available from Start > Settings > the
System tab. The application separates the task of wireless printing setup
from other Bluetooth management tasks.
The Wireless Printing application uses the concept of a “current wireless
printer.” The computer connects to the current wireless printer when your
application opens the wireless printing COM port on your computer. If
there is no current wireless printer selected on your computer, there is no
wireless printing COM port registered on your computer. You must select a
current wireless printer as described in the next section.
The Wireless Printing application performs these tasks on the computer:
Helps you select the current wireless printer
Stores the current wireless printer in the registry
Registers/deregisters the wireless printing COM port
Stores the wireless printing COM port in the registry as the WPort
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 43
Specifically, the current wireless printer is registered and deregistered on
Bluetooth stack load/unload. If you select a different current wireless
printer, the existing wireless printing COM port is deregistered and the new
one is registered instead. The Wireless Printing application uses the
Bluetooth COM Port Control to handle COM port registration/
deregistration.
Selecting the Current Wireless Printer on the Computer
By default, there is no current wireless printer selected on the computer.
There are three ways to select the current wireless printer:
Discovering the printer using Bluetooth device discovery
Manually entering the printers Bluetooth device address
Choosing the printer from a list of previously discovered printers
To discover the printer with Bluetooth device discovery
2 Tap Search to initiate printer discovery. All Bluetooth printers
discovered within range appear in the devices list.
3 Select the printer you want to connect to and then tap OK.
4 If your preferred printer does not appear, make sure the printer is turned
on and discovery is enabled, and then repeat Steps 1 through 3.
5 Tap Print Test Page. The printer prints out the test page.
1 Select Start > Settings > the Systems tab > Wireless Printing. The
Wireless Printing wizard appears.
Chapter 3 — Configuring the Computer
44 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
To manually enter the device address of the printer
3 Type the address of the printer in the Enter Device Address text box and
then tap OK. The keyword -unknown- appears in the Device Name
field in the Current Wireless Printer box. The name of the printer is not
sent to the computer when you manually enter the printer address.
4 Tap Print Test Page. The printer prints out the test page.
To choose the printer from a list of previously discovered printers
1 Make sure you have already performed a Bluetooth device discovery.
Configuring Local Area Networks
Your computer is a versatile mobile computer that easily adds to your wired
or wireless data collection network. You can connect your computer to a
network using:
USB communications.
802.11 radio communications.
1 Select Start > Settings > the Systems tab > Wireless Printing. The
Wireless Printing wizard appears.
2 Tap Manual. The wizard advances to the next screen where you enter
the device address.
2 Select Start > Settings > the Systems tab > Wireless Printing. The
Wireless Printing wizard appears.
3 Tap Set Different Printer. The Devices list appears with the list of
previously discovered printers.
4 Select the printer you want and tap OK.
5 Tap Print Test Page. The printer prints out the test page.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 45
Configuring USB Communications
You can place your computer in a single dock, multidock, modem dock, or
vehicle dock to transfer data to and receive data from another device using
USB communications. The USB cable and all of the docks are sold
separately. For information on accessories and how to order them, see
Accessories” on page 93.
To use USB communications with your computer
1 Connect the dock to the USB port of the other device using an
appropriate USB cable.
2 Make sure your USB device is configured for USB communications.
3 Insert the computer into the dock and turn it on.
A status box appears on the screen to show that the computer is making a
USB connection.
Configuring Ethernet Communications
You can use your computer directly in an Ethernet network if you use the
Ethernet Adapter Cup or one of the communications docks. The adapter
cup provides an RJ-45 connector off of it to connect to your Ethernet
network and the communications docks provide an Ethernet connector
that allows your computer to communicate in an Ethernet network.
To use your computer in an Ethernet network
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen. The iConnect pop-up menu appears:
2 Select Enable > Ethernet.
3 (Optional) Configure the IP Settings for the Ethernet Adapter if you are
not using DHCP. DHCP is the default setting.
4 (Optional) If required for your network, you may also need to set these
parameters on each computer:
Primary and secondary DNS servers
Primary and secondary WINS servers
5 Make sure that your computer is talking to the network and that the
network can see your computer.
Chapter 3 — Configuring the Computer
46 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Configuring 802.11 Radio Communications
The 751 Mobile Computer has an internal 802.11 b/g radio to transfer
data using wireless communications. This section of the manual assumes
that you have already set up your wireless communications network
including your access points. If you are using a UDP Plus network, have
your Intermec Application Server communicate with a host computer.
Your computer supports these network protocols:
•TCP/IP
UDP Plus
The next sections explain the parameters you need to configure for the 751
to work in your wireless network.
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the 751 communicates with a host computer directly
using TCP/IP. The access point acts as a bridge to allow communications
between the wired network and the wireless network.
To use wireless communications in a TCP/IP network
1 Go to Start > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on each 751 in the network:
Network name (SSID)
IP settings (if not using DHCP)
3 Make sure that the 751 is talking to the network and that the network
can see the 751.
4 Configure security. For help, see “Configuring Security on the Wireless
Network” on page 47.
The easiest way to configure the network parameters on the 751 is to use
Intermec Settings. For help, see “Configuring the Computer With
Intermec Settings” on page 38.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the 751 communicates with a host computer
through the Intermec Application Server. The Intermec Application Server
translates UDP Plus packets on the wireless network into TCP/IP packets
on the wired networks and vice versa. The access point acts as a bridge to
allow communications between the wired network and the wireless
network.
To use wireless communications in a UDP Plus network
1 Go to Start > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on the 751:
Network name (SSID)
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 47
Controller IP address
IP settings (if not using DHCP)
Network port
3 Make sure the 751 is talking to the network and that the network can
see the 751.
4 Configure security. For help, see “Configuring Security on the Wireless
Network” on this page.
Checking the Status of Your Wireless Connection
After you configure your wireless settings, you can use iConnect to check
the status of your connection.
To check the status of your wireless connection
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 From the menu, select Status > Wireless. The Wireless Status screen
appears and checks the connection.
You can also use iConnect to configure or change the network settings by
tapping Tools > Wireless Settings from the iConnect menu.
Configuring Security on the Wireless Network
Your wireless adapter (network interface card) connects to wireless networks
of two types: infrastructure networks and ad-hoc networks.
Infrastructure networks connect you to your corporate network and the
internet. Your computer establishes a wireless connection to an access
point, which links you to the rest of the network.
Ad-hoc networks are private networks shared between two or more
clients, even without an access point.
Each wireless network is assigned a name (or SSID) to allow multiple
networks to coexist in the same area without infringement.
Intermec recommends using security measures with wireless networks to
prevent unauthorized access to your network and to ensure the privacy of
transmitted data. These elements are required for secure networks:
Authentication by both the network and the user
Authentication is cryptographically protected
Transmitted data
Chapter 3 — Configuring the Computer
48 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
There are many schemes available to implement these features. Use the
following tables to understand the common terminology for wireless
network security.
Encryption Terminology
Acronym Description
AES
(Advanced Encryption
Standard)
A block cipher, a type of symmetric key cipher that uses groups of
bits of a fixed length - called blocks. A symmetric key cipher is a
cipher using the same key for both encryption and decryption.
As implemented for wireless, this is also known as CCMP, which
implements AES as TKIP and WEP are implementations of
RC4.
CKIP (Cisco Key
Integrity Protocol)
This is Ciscos version of the TKIP protocol, compatible with
Cisco Aironet products.
TKIP (Temporal Key
Integrity Protocol)
This protocol is part of the IEEE 802.11i encryption standard for
wireless LANs, which provides per-packet key mixing, a message
integrity check and a re-keying mechanism, thus overcoming
most of the weak points of WEP. This encryption is more
difficult to crack than the standard WEP. Weak points of WEP
include: No Initiation Vector (IV) reuse protection, weak keys,
no protection against message replay, no detection of message
tampering, and no key updates.
WEP (Wired
Equivalent Privacy)
encryption
With preconfigured WEP, both the client 751 and access point
are assigned the same key, which can encrypt all data between the
two devices. WEP keys also authenticate the 751 to the access
point - unless the 751 can prove it knows the WEP key, it is not
allowed onto the network. WEP keys are only needed if they are
expected by your clients. There are two types available: 64-bit (5-
character strings, 12345) (default) and 128-bit (13-character
strings, 1234567890123).
Key Management Protocols Terminology
Acronym Description
WPA (Wi-Fi
Protected Access)
This is an enhanced version of WEP that does not rely on a static,
shared key. It encompasses a number of security enhancements over
WEP, including improved data encryption via TKIP and 802.11b/g
authentication with EAP. WiFi Alliance security standard is designed
to work with existing 802.11 products and to offer forward
compatibility with 802.11i.
WPA2 (Wi-Fi
Protected Access)
Second generation of WPA security. Like WPA, WPA2 provides
enterprise and home Wi-Fi users with a high level of assurance that
their data remains protected and that only authorized users can access
their wireless networks. WPA2 is based on the final IEEE 802.11i
amendment to the 802.11 standard ratified in June 2004. WPA2 uses
the Advanced Encryption Standard (AES) for data encryption and is
eligible for FIPS (Federal Information Processing Standards) 140-2
compliance.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 49
The 751 provides three types of security for your wireless network: Wi-Fi
Protected Access 2 (WPA2/802.11i), WPA, and WEP. 802.1x should be
referred to as an authentication method used for WPA and WPA2. Another
authentication method for WPA and WPA2 would be the Pre-Shared Key
(PSK).
Authentication Terminology
Acronym Description
EAP (Extensible
Authentication
Protocol)
802.11b/g uses this protocol to perform authentication. This is not
necessarily an authentication mechanism, but is a common
framework for transporting actual authentication protocols. Intermec
provides a number of EAP protocols for you to choose the best for
your network.
EAP-FAST
(Flexible
Authentication
via Secure
Tu n n e l i n g )
A publicly accessible IEEE 802.1X EAP type developed by Cisco
Systems. It is available as an IETF informational draft. An 802.1X
EAP type that does not require digital certificates, supports a variety
of user and password database types, supports password expiration
and change, and is flexible, easy to deploy, and easy to manage.
LEAP
(Lightweight
Extensible
Authentication
Protocol)
Also known as Cisco-Wireless EAP, provides username/password
based authentication between a wireless client and a RADIUS server.
In the 802.1x framework, traffic cannot pass through a wireless
network access point until it successfully authenticates itself.
EAP-PEAP
(Protected
Extensible
Authentication
Protocol)
Performs secure authentication against Windows domains and
directory services. It is comparable to EAP-TTLS both in its method
of operation and its security, though not as flexible. This does not
support the range of inside-the-tunnel authentication methods
supported by EAP-TTLS. Microsoft and Cisco both support this
protocol.
EAP-TLS
(Transport Layer
Security)
Based on the TLS (Transport Layer Security) protocol widely used to
secure web sites. This requires both the user and authentication server
have certificates for mutual authentication. While cryptically strong,
this requires corporations that deploy this to maintain a certificate
infrastructure for all users.
EAP-TTLS
(Tunneled
Tr a ns p or t L aye r
Security)
This protocol provides authentication like EAP-TLS but does not
require certificates for every user. Instead, authentication servers are
issued certificates. User authentication is done using a password or
other credentials that are transported in a securely encrypted tunnel”
established using server certificates.
EAP-TTLS works by creating a secure, encrypted tunnel through
which you present your credentials to the authentication server. Thus,
inside EAP-TTLS there is another inner authentication protocol that
you must configure via Additional TTLS Settings.
Chapter 3 — Configuring the Computer
50 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Choosing Between Microsoft and Funk Security
Before you can implement a security solution on the 751, you need to
choose between Microsoft and Funk security:
By default, Funk security is enabled. It provides everything you get with
Microsoft security plus the addition of Cisco Compatible Extensions
features. It also provides additional authentication types like EAP-
TTLS, LEAP, and EAP-FAST.
Microsoft security, with its Microsoft Zero Config feature, is also
available. To switch to Microsoft security, go to “Configuring Microsoft
Security” on page 62 to start.
If you want to use the default Funk security, you need to select a profile. For
help, see one of the following sections, “Configuring Funk Security Using
Intermec Settings” on this page or “Configuring Funk Security Using the
Profile Wizard” on page 53.
If you want to use Microsoft security, you need to select it as your security
choice. For help, see “Configuring Microsoft Security” on page 62.
Configuring Funk Security Using Intermec Settings
You can define up to four profiles for Funk security. Different profiles let
your 751 communicate in different networks without having to change all
of your security settings. For example, you may want to set up one profile
for the manufacturing floor and one for the warehouse. By default, the
active profile is Profile_1.
To select a profile for Funk security
1 Select Start > Settings > the Systems tab > Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Select Active Profile, choose a profile from the list, and save your
settings.
4 Tap the active profile to expand it.
5 (Optional) Give your profile a meaningful name:
a Select Profile Label and a text box appears.
b Select the text in the box, type a meaningful name, and save your
settings.
6 Select one profile as the active profile by tapping Active Profile and
choosing a profile fro the drop-down list.
7 Save your settings.
Note: Your security choice does not depend on your authentication server.
For example, you can choose Funk security if you use Microsoft Active
Directory® to issue certificates.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 51
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or
WPA2-PSK security on your 751 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Make sure you have configured the communications and radio
parameters on your 751.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
5 For Association, choose WPA or WPA2 and press Enter. Encryption
automatically defaults to TKIP if you are using WPA. Encryption
automatically defaults to AES if you are using WPA2.
6 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and press Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
b Select User name and type your user name.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your 751. For help, see “Loading
a Certificate” on page 64.
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can also enter
a Server Common Name if you want to increase your level of
security.
7 Exit Intermec Settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Make sure you have configured the communications and radio
parameters on your 751.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
Note: You can use Prompt for credentials to troubleshoot your connection to
the network if you have problems.
Note: You must have the date on the 751 set correctly when you enable
Validate Server Certificate.
Chapter 3 — Configuring the Computer
52 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
5 For Association, choose WPA or WPA2.
6 For 8021x, choose None.
7 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x for a
total of 66 characters. The value must match the key value on the access
point. The passphrase must be from 8 to 63 characters. After you enter a
passphrase, the 751 internally converts it to a pre-shared key.
This value must match the passphrase on the authenticator.
8 Exit Intermec Settings.
Configuring 802.1x Security With Funk Security
1 Make sure you have configured the communications and radio
parameters on your 751.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For Authentication, choose TTLS, PEAP, or TLS.
If you choose TTLS or PEAP:
a Select User name and type your user name.
b Select Password prompt, and choose Enter password now.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your 751. For help, see “Loading
a Certificate” on page 64.
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can also enter
a Server Common Name if you want to increase your level of
security.
8 Exit Intermec Settings.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 53
Configuring LEAP Security on the 751
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your 751.
3 From Intermec Settings, choose Communications > 802.11 Radio >
Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA, to AES
if you choose WPA2, and to WEP if you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Exit Intermec Settings.
Configuring Static WEP Security With Funk Security
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your 751.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security > Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For 8021x, choose None.
8 Define a value for the keys you want to use. You can define up to four
keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long
depending on the capability of the radio. Set a 5-byte value for 64-bit
WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded
by 0x and contain 5 or 13 hex pairs.
9 For Transmit key, choose the key you want to use for transmitting data.
10 Exit Intermec Settings.
Configuring Funk Security Using the Profile Wizard
You can start 802.11 b/g communications on the 751 using the Profile
Wizard. A profile contains all the information necessary to authenticate you
to the network, such as login name, password or certificate, and protocols
by which the 751 is authenticated. You can have up to four profiles for
different networks. For example, you may have different login names or
passwords on different networks.
Chapter 3 — Configuring the Computer
54 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
To select a profile for Funk security
1 Select Start > Settings > the Systems tab > Wireless Network.
or
Tap the iConnect icon ( ) in the lower right corner of the Today
screen and select Tools > Wireless Settings.
The Profile Wizard appears.
2 From the Profile list, select the profile you want to configure.
3 Tap Edit Selected Profile.
4 (Optional) Give your profile a meaningful name by selecting the text in
the Profile Label text box and typing a meaningful name.
5 From the Network type list, select either Infrastructure or Ad-Hoc.
Select Infrastructure if the network uses access points to connect to the
corporate network or internet. Select Ad-Hoc to set up a private
network with one or more participants.
6 Enter the SSID (Network Name) if different than the profile name.
7 (Optional) Check the Enable Power Management box to conserve
battery power.
8 Click OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose Open or Shared to match the settings on your
access point.
4 For Encryption, choose WEP.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 55
5 From the Data TX Key list, select the key you want to use for
transmitting data.
6 Define a value for the keys you want to use. You can define up to four
keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long
depending on the capability of the radio. Set a 5-byte value for 64-bit
WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded
by 0x and contain 5 or 13 hex pairs.
7 Tap OK.
Configuring WPA-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose WPA.
4 For Pre-Shared Key field, enter the passphrase as ASCII. The
passphrase must be 8 to 63 characters and match the passphrase on the
access point.
Chapter 3 — Configuring the Computer
56 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
5 Tap OK.
Configuring WPA2-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose WPA2.
4 For Encryption, choose TKIP or AES.
5 For Pre-Shared Key field, enter the passphrase as ASCII (12345).
6 Tap OK.
Configuring PEAP Security With Profile Wizard
Protected EAP (PEAP) performs secure authentication against Windows
domains and directory services. It is comparable to EAP-TTLS, though not
as flexible.
To configure PEAP security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose PEAP.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 57
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP or CKIP if you selected Network EAP for
association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password each
time to access the protocol, or select Use following password to use the
protocol without entering a password each time you use the 751.
8 Tap Get Certificates to obtain or import server certificates. For help
with certificates, see “Loading a Certificate” on page 64.
9 Tap Additional Settings to assign an inner PEAP authentication and set
options for server certificate validation and trust.
10 From the Inner PEAP Authentication list, choose EAP/MS-CHAP-
V2, EAT/Token Card, or EAP/MD5-Challenge.
11 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using PEAP.
12 Tap Root CA, select a root certificate, and then tap OK.
13 Enter the Common Names of trusted servers.
14 Tap OK.
Configuring TLS Security With Profile Wizard
EAP-TLS is a protocol based on the Transport Layer Security (TLS)
protocol widely used to secure web sites. This protocol requires both the
user and authentication server to have certificates for mutual
authentication.
To configure TLS security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose TLS.
Chapter 3 — Configuring the Computer
58 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP or CKIP if you selected Network EAP for
association.
5 For Subject Name, type a unique subject name for this protocol.
6 For User Name, type a unique user name for this protocol.
7 Tap Get Certificates to obtain or import server certificates. For help
with certificates, see “Loading a Certificate” on page 64.
8 Tap Additional Settings to server certificate validation and trust.
9 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using TLS.
10 Tap Root CA, select a root certificate, and then tap OK.
11 Enter the Common Names of trusted servers.
12 Tap OK.
Configuring TTLS Security With Profile Wizard
TTLS protocol provides authentication like EAP-TLS but does not require
user certificates. User authentication is done using a password or other
credentials that are transported in a securely encrypted “tunnel” established
using server certificates.
To configure TTLS security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose TTLS.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 59
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP or CKIP if you selected Network EAP for
association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password each
time to access the protocol, or select Use following password to use the
protocol without entering a password each time you use the 751.
8 (Optional) Tap Get Certificates to obtain or import server certificates.
For help with certificates, see “Loading a Certificate” on page 64.
9 Tap Additional Settings to assign an inner TTLS authentication, inner
EAP, and set options for server certificate validation and trust.
10 From the Inner TTLS Authentication list, choose PAP, CHAP, MS-
CHAP, MS-CHAP-V2, PAP/Token Card, or EAP.
11 If you select EAP for the inner authentication protocol, select and inner
EAP protocol form the Inner EAP list.
12 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using TTLS.
13 Tap Root CA, select a root certificate, and then tap OK.
14 Enter the Common Names of trusted servers.
15 For Anonymous EAP-TTLS Name, type an outer identity to protect
your login name or identity.
16 Tap OK.
Configuring LEAP Security With Profile Wizard
LEAP is the Cisco Lightweight version of EAP.
Chapter 3 — Configuring the Computer
60 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
To configure LEAP security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose LEAP.
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP or CKIP if you selected Network EAP for
association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password each
time to access the protocol, or select Use following password to use the
protocol without entering a password each time you use the 751.
8 Tap OK.
Configuring EAP-FAST with Profile Wizard
The EAP-FAST protocol is a client-server security architecture that
encrypts EAP transactions with a TLS tunnel. While similar to PEAP, EAP-
FAST differs significantly since tunnel establishment is based on strong
secrets unique to users. These secrets are called Protected Access Credentials
(PACs), which CiscoSecure ACS generates using a master key known only
to CicsoSecure ACS. EAP-FAST does not require certificate management.
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose EAP-FAST.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 61
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose WEP or CKIP if you selected Network EAP
for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password each
time to access the protocol, or select Use following password to use the
protocol without entering a password each time you use the 751.
8 Tap Additional Settings to set options for PAC management and assign
an anonymous EAP-FAST name.
9 Tap PAC Manager to view the PAC files currently installed on the 751.
Tap ok to return to the Additional Settings screen.
10 If you already have a PAC on the 751, clear Allow Automatic PAC
provisioning to avoid receiving more PACs from the server.
11 If Allow Automatic PAC provisioning is selected, you can check:
Prompt before acquiring a new PAC for notification of any
incoming PACs.
Chapter 3 — Configuring the Computer
62 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Prompt before replacing a PAC for notification whether to replace
a current PAC with an incoming PAC.
12 For Anonymous EAP-FAST Name, type the outer identity assigned for
public usage.
13 Tap OK.
Configuring Microsoft Security
The default security setting is Funk. If you want to use Microsoft security,
you need to select it as your security choice. After you select Microsoft as
your security choice, you will be prompted to save your settings and reset
your computer for your change to take effect.
To select Microsoft security as your security choice
1 Select Start > Settings > the System tab > Intermec Settings. The
Intermec Settings application appears.
2 Select Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security and save your
settings. An alert box appears telling you that you must save your
settings and warm boot the 751 for the new security choice to take
effect.
4 Tap Yes. The 751 resets and starts with Microsoft Security as the
Security Choice.
Networks already configured are preferred networks. You can connect to
only preferred networks or search for and connect to any available network.
You can add a wireless network when the network is detected or manually
by entering settings information. To determine if authentication
information is needed, see your network administrator.
To configure Microsoft security
1 Select Start > Settings > the Connections tab > WiFi > Add New.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 63
2 Enter a Network name. If the network was detected, the network name
is entered and cannot be changed.
3 From the Connects to list, select where you want your network to
connect:
If you select Work, you can create a VPN connection or use proxy
servers.
If you select The Internet, you can connect directly to the internet.
4 (Optional) To connect to an ad-hoc connection, select This is a device-
to-device (ad-hoc) connection.
5 Tap Next.
6 Follow these steps to disable authentication:
a Set Authentication to Open if WEP keys are not required or to
Shared when WEP keys are required for association.
b Set Data Encryption to Disabled.
Follow these steps to enable WEP encryption:
a Set Authentication to Open if WEP keys are not required or to
Shared when WEP keys are required for association.
b Set Data Encryption to WEP.
c To change the network key, clear The key is automatically
provided check box, enter the new Network key, and then select the
appropriate Key index.
Follow these steps to enable WPA authentication:
a Set Authentication to WPA.
b Set Data Encryption to either WEP or TKIP.
Follow these steps to enable WPA authentication using a preshared key:
a Set Authentication to WPA-PSK.
b Set Data Encryption to either WEP or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication:
a Set Authentication to WPA2.
b Set Data Encryption to AES or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication using a preshared
key:
a Set Authentication to WPA2-PSK.
b Set Data Encryption to AES or TKIP.
Chapter 3 — Configuring the Computer
64 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
c Enter the new Network key.
7 Tap Next.
8 From the EAP type list, select either PEAP or Smart Card or
Certificate and then tap Finish.
9 From the Networks to access list, select All Available, Only access
points, or Only computer-to-computer.
10 Tap ok to close the screen.
Loading a Certificate
If you choose to use transport layer security (TLS) with WPA or 802.1x
security, you need to have a unique client certificate on the 751 and a
trusted root certificate authority (CA) certificate. Certificates are pieces of
cryptographic data that guarantee a public key is associated with a private
key. They contain a public key and the entity name that owns the key. Each
certificate is issued by a certificate authority.
To import a root certificate
1 Tap the <<< button next to the Import Root Certificate field to select
the root certificate (DER-encoded .cer file) to import.
2 Click Import Root Cert to install the selected certificate.
To import a user certificate
1 Tap the <<< button next to the Certificate Path field to select the user
certificate (DER-encoded .cer file without the private key) to import.
2 Tap the <<< button next to the Key Path field to select the private key
(.pvk file) which corresponds to the user certificate chosen in Step 1.
Note: If you select to automatically connect to non-preferred networks, the
751 detects any new networks and provides you with the opportunity to
configure them.
Chapter 3 — Configuring the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 65
To import a user certificate from an IAS server
1 Tap Web Enrollment.
2 Enter the User, Password, and Server (IP address) to log into the server.
3 Tap OK. A dialog box appears asking if you want to load the root
certificate.
4 Tap OK for yes. The Enrollment Tool message box appears telling you
that the certificate has been added.
5 Tap OK to close the message box.
Disabling Security
If you choose not to use security with your wireless network, you can
disable it on the CV30. Intermec recommends that you always set security
in your network.
To disable security
1 Open Intermec Settings.
2 Choose Communications > 802.11 Radio > Microsoft Security.
3 For Network Authentication, choose Open.
4 For Data Encryption, choose Disabled.
5 Close Intermec Settings.
Chapter 3 — Configuring the Computer
66 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 67
4
Developing and Installing
Applications
Use this chapter to understand the guidelines for developing applications
for use on the computer. This chapter contains these sections:
Developing Applications for the Computer
Installing Applications on the Computer
Freeing Up Virtual Memory for Applications
Launching an Application Automatically
Upgrading the System Software
Chapter 4 — Developing and Installing Applications
68 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Developing Applications for the Computer
The 741 and 751 mobile computers run applications programmed in
Microsoft Visual Studio 2005. You can also use Microsoft eMbedded
Visual C++ 4.0, but some features may not be available. Use this section to
understand the hardware and software you need to:
develop a new application for the computer
develop a web-based application for the computer
Developing a New Application
Use the Intermec resource kits to develop new applications to run on the
mobile computer. The Intermec resource kits are a library of C++ and
.NET components grouped by functionality that you can use to create
applications for the computer. The resource kits are part of the Intermec
Developer Library (IDL), and can be downloaded from the Intermec web
site at www.intermec.com/idl.
You need these hardware and software components to use the Intermec
resource kits:
Pentium PC, 400 MHz or higher
Windows 2000 (Service Pack 2 or later) or Windows XP (Home,
Professional, or Server)
For native and managed development, Microsoft Visual Studio 2005
128 MB RAM (196 MB recommended)
360 MB hard drive space for minimum installation (720 MB for
complete)
CD-ROM drive compatible with multimedia PC specification
VGA or higher-resolution monitor (Super VGA recommended)
Microsoft Mouse or compatible pointing device
Developing a Web-Based Application
You can develop web-based data collection applications for use on the
computer. For help, see any HTML source book. The mobile computer
contains Internet Explorer Mobile for you to use. Microsoft Internet
Explorer Mobile is available from the Start menu and provides all of the
common elements you expect to find.
Installing Applications
There are several ways you can install applications on your mobile
computer:
You can package your application as a cabinet (.cab) file.
Chapter 4 — Developing and Installing Applications
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 69
If you have a simple application, you may only need to deliver the .exe
file.
You can copy a directory structure that contains the application,
supporting files, DLLs, images, and data files.
Intermec recommends using .cab files to install your applications. The
mobile computer uses standard Windows Mobile .cab files and will install
third-party .cab files. You can have your .cab files place your application in
any of these memory locations on the mobile computer:
The Object Store or the Flash File Store. The Object Store is a
DiskOnChip® flash that looks like a disk. The Flash File Store is an area
of storage which is embedded in a section of the system flash memory.
This storage is not erased during a reset, although it might be erased
during the reflashing process. In addition to storing applications and
data files, you have the option to store persistent registry information to
the Flash File Store region.
The optional Secure Digital (SD) card or CompactFlash (CF) card. If
you are using an SD or CF card, this should be the primary location to
place application installation files. The following folders represent either
card:
The SD card creates the \SDMMC Disk folder.
The CF card creates the \Storage Card folder.
The non-volatile Flash File Store region of the storage. Use the small
non-volatile Flash File Store region to hold .cab files that rebuild the
system at clean boot or install applications from a .cab file into the Flash
File Store so that they are “ready-to-run” when you perform clean boot.
Since the flash in the system has a limited number of write cycles, do
not use the Flash File Store for excessive writing.
Files copied to any of these locations are safe when you cold boot the
computer as long as the AutoRun system is installed in the appropriate
location. You can find information about this system in the Intermec
Developer’s Library (IDL) Resource Kit Developers Guide which is available
from www.intermec.com/idl. When you copy a .cab file to the \CabFiles
folder, the folder automatically extracts that .cab file on every cold boot.
There are several ways you can install files and applications on the
computer:
SmartSystems server
ActiveSync
•SD card
FTP server
Wavelink Avalanche
The following sections explain how to use each one of these processes to
install your application on the computer.
Chapter 4 — Developing and Installing Applications
70 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Installing Applications Using SmartSystems Server
You can use the SmartSystems server to drag-and-drop Intermec
applications onto your mobile computers. The computer ships with the
SmartSystems client, which means it is SmartSystems-enabled. The console
is part of SmartSystems Foundation, which you can download from
www.intermec.com/SmartSystems. For help using the console, see the
online help.
To use SmartSystems console to install an application
1 Download your application file from the Intermec web site and unzip it
on your desktop PC.
2 Double-click the application file to install it. The application file should
appear in the Software Vault.
3 From the SmartSystems console in the Software Vault, drag-and-drop
the application onto each mobile computer in your network.
Installing Applications Using Microsoft ActiveSync
You can use Microsoft ActiveSync to establish a connection between your
PC and the computer. ActiveSync transfers files, synchronizes files,
performs remote debugging, and other device management activities. For
more information on installing and using ActiveSync, see “Using Microsoft
ActiveSync” on page 33.
You can have a serial or USB ActiveSync connection to the mobile
computer. When you only have a few computers to update, you can copy
files using Windows Explorer on a PC.
This procedure assumes that Microsoft ActiveSync is installed on your PC
and is up and running.
To install an application on the computer using ActiveSync
1 Connect the mobile computer to a PC using a USB cable. You may have
to disconnect and then connect the cable to “wake” the connection.
2 Wait for a “Connected” message to appear in the Microsoft ActiveSync
application to signal a connection to the mobile computer.
If necessary, select File > Get Connected to initiate a connection.
Chapter 4 — Developing and Installing Applications
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 71
3 Click Explore to open the Mobile Device window that shows the files
and folders on the mobile computer.
4 On your desktop PC, locate the .cab file you want to download to the
mobile computer and copy it.
5 From the Mobile Device window, open the My Windows Mobile-
Based Device folder and navigate to the folder where you want to paste
the .cab file.
6 Paste the .cab file into the desired folder.
7 When you are done copying files, warm boot the mobile computer.
8 After the mobile computer is done warm booting, tap Start > Programs
> File Explorer to locate the newly copied files.
9 Tap the .cab files to install them.
Installing Applications Using a Storage Card
If you have an SD or CF card for your mobile computer, this is the best
place for you to install applications.
To install applications using the storage card
1 Suspend the mobile computer and remove the storage card.
2 Insert the storage card into the storage card reader connected to your
desktop PC.
3 Copy your application file to the storage card.
If you are using ActiveSync, an FTP server, or Wavelink Avalanche to
copy the files to the SD card, place the application in the Storage Card
folder located in My Windows Mobile-Based Device.
4 Insert the storage card back into the mobile computer.
5 Navigate to the storage card folder and run your application.
Chapter 4 — Developing and Installing Applications
72 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Installing Applications Using the FTP Server
The computer has a built-in FTP server that connects to a network through
the 802.11 b/g radio. You can use the server to transfer your application file
to the computer. Another benefit of using the FTP server is that you can
create FTP scripts to automate the process of copying your files to the
computer. This option is useful when you need to send files to a large
number of computers.
If you want to disable the FTP server use a CAB file or another method to
modify the registry key HKEY_LOCAL_MACHINE\COMM\FTPD.
You need to set the value IsEnabled (a REG_DWORD) to zero (0). If you
set the value to zero, the Web server will not accept connections from the
network, even from the local host.
Installing Applications Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system to install
applications on all of your wireless 751s. The 751 ships with the Avalanche
Enabler already loaded on it.
Each time the Avalanche Enabler is activated (typically on a reset), the 751
attempts to connect to the Avalanche Agent. When the 751 connects to the
agent, the agent determines whether an update is available and immediately
starts the software upgrade, file transfer, or configuration update.
To use Avalanche to remotely manage the 751
1 Install software packages and updates for the 751 using the Avalanche
Administrative console.
2 Schedule the 751 updates or manually initiate an update using the
Avalanche Administrative console.
For more information on using Wavelink Avalanche, contact your local
Intermec representative or visit the Wavelink web site at
www.wavelink.com.
Freeing Up Virtual Memory for Applications
You can use the InstallSelect application to reduce the amount of virtual
memory used by portions of the SmartSystems Platform Bundle (SSPB).
Freeing up virtual memory provides you with more space to load and run
custom applications. In technical terms, virtual memory allows software to
run in a memory address space whose size and addressing are not necessarily
tied to the physical memory of the computer.
Note: InstallSelect is designed for use only by administrators, developers,
integrators, or Intermec service representatives.
Note: Do not run InstallSelect while using any other applications.
Chapter 4 — Developing and Installing Applications
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 73
InstallSelect manages the installation of value-added software features of the
computer. Removing software features may result in loss of computer
functionality or the ability to manage device settings. See “Understanding
the InstallSelect Software Components” on page 74 or contact your
Intermec service representative for information about each software feature
before making changes.
To free up virtual memory, select items from the InstallSelect list that you
do not want to install. When you perform a clean boot, the items you
selected are not installed. However, you can reinstall any of these SSPB
components at any time with InstallSelect. Be sure to back up any related
files that you want before you use the InstallSelect application. The
InstallSelect application is part of the SSPB and is installed at the factory.
For more information on SSPB, see “Upgrading the System Software” on
page 75.
To free up virtual memory
1 Go to Start > Programs > File Explorer.
2 Tap the Windows folder.
4 Tap OK to close the Caution dialog box.
5 Clear the check box of any components you do not want installed after a
clean boot.
By default, components already installed on the computer are
automatically checked to be installed again after you perform a clean
boot.
6 Tap Apply to initiate the clean boot and install only the files that are
selected.
3 Scroll down to the InstallSelect application and tap the icon. The
InstallSelect application appears on the display with a Caution dialog
box.
Chapter 4 — Developing and Installing Applications
74 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
7 Tap Yes to continue with the clean boot. The computer performs a
clean boot and restarts with all of the checked components installed.
Launching An Application Automatically
There are two ways to automatically launch your application when you
perform a reset on the computer:
Make sure your CAB file places a shortcut to your application in the
\Windows\StartUp folder.
Configure the AutoRun program to launch your application.
The computer contains a program called AutoRun.exe which automates
operations such as launching other processes. You can configure
AutoRun.exe through the AutoRun data file, AutoRun.dat. This script file
must be located in the same directory as the program.
AutoRun supports the following script commands in AutoRun.dat:
Understanding the InstallSelect Software Components
Component Name Description
Data Collection &
Intermec Settings
Data collection and Intermec Settings. Also includes on-unit
SDK libraries.
If you disable this CAB file, you cannot scan or collect data
on the device and you cannot use Intermec Settings.
Funk Wireless Security Intermec security supplicant that provides a wireless security
solution with several features that are not supported by
Microsoft.
Printer Support Provides Intermec printer driver support.
SmartSystems Client &
Intermec Settings
Enables the client SmartSystems Server and the use of
Intermec Settings on the local computer.
If you disable this CAB file, you cannot use SmartSystems or
Intermec Settings locally on the device.
Intermec DHCP Client Provides the Intermec DHCP client application.
Bluetooth Provides the Intermec Bluetooth application support.
Avalanche Enabler Enables the client to the Wavelink Device Management
solution.
AutoRun Script Commands
Command Description
EXEC Launches a specified program and waits for it to finish (up to 10
minutes)
CALL Processes a specified file of commands and returns.
CHAIN Processes a specified file of commands and does not return.
RUN Loads a specified program and executes it.
LOAD Loads a specified program and executes it.
Chapter 4 — Developing and Installing Applications
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 75
AutoRun handles quoted file names for the first parameter, which allows
you to specify path names or file names that contain white spaces. AutoRun
only supports one set of quotes per command.
Upgrading the System Software
When you upgrade your computer, you are updating the operating system
(OS) and the Persistent Storage Manager (PSM) files.
The PSM files are stored in the Flash File Store region, and deliver Intermec
Value Add (IVA) functionality such as data collection, configuration, the
Intermec wireless security suite, and the SmartSystems Foundation.
There are two ways to upgrade your computer:
You can upgrade your computer using an storage card. For help, see the
next section, “Using an SD Card to Upgrade the Computer.
You can upgrade your computer using the SmartSystems Server. For
help, see “Using the SmartSystems Console to Upgrade the
Computer” on page 76.
You need to download the latest upgrade files from the Intermec web site to
your desktop PC.
To download the upgrade files
1 Start your web browser and go to the Intermec web site at
www.intermec.com.
2 Go to Support > Downloads.
3 Click the link to search the product downloads.
4 Select your computer from the Downloads list. The Downloads page
displays all of the downloads available for your computer.
5 Download the upgrade file.
Using an SD Card to Upgrade the Computer
To use an SD card to upgrade the computer, you need an SD card reader
and an SD card formatted as FAT.
To upgrade the computer using an SD card
1 Locate the storage card access door at the top of the computer, remove
its two screws, remove the door, then remove the storage card. See the
700 Color Mobile Computer Quick Start Guide (P/N 930-163-xxx) for
more information.
Note: The computer currently supports Delkin Secure Digital cards only.
Intermec cannot guarantee that other Secure Digital cards will work with
the computer.
Chapter 4 — Developing and Installing Applications
76 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
This shows the top of the computer. Note the keypad is facing downward.
2 Place the storage card in your desktop PC card reader, and then copy all
required upgrade files to the SD card.
3 Remove the SD card from your card reader and reinstall it in the
computer.
4 Press the Reset button inside the battery compartment to perform a
cold boot. Do not use force or a sharp object when pressing the Reset
button, or you may damage the Reset button.
This shows the back of the computer inside the battery compartment.
5 Return the computer to DC power, such as installing it into a dock
connected to external power.
6 When the Bootloader Menu shows “complete,” remove the SD card,
then press the Reset button again to load the new operating system.
7 When the computer finishes booting, insert the battery and then close
the battery door.
You may use the computer. You have reset the computer to its default
configuration. You need to set the date and time and to set its network
communications parameters to reestablish communications with the other
devices in the wireless network.
Using the SmartSystems Console to Upgrade the Computer
You can use the SmartSystems console to upgrade the operating system on
your computer. The console is part of SmartSystems Foundation and is
available from the Intermec web site via the Intermec Developer Library
(IDL). Before you can upgrade your computer, you need:
the SmartSystems Foundation. To download SmartSystems Foundation,
go to www.intermec.com/idl and open the Device Management page.
Storage Media Access Door
Reset button
Note: The upgrade will fail if the computer is not connected to external
power. For help, see Accessories” on page 93.
Chapter 4 — Developing and Installing Applications
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 77
the device upgrade .exe file. This file is available from the Intermec web
site at www.intermec.com. Go to Support > Downloads. Make sure
the file you select is for your language.
To upgrade the computer using SmartSystems console
1 Install SmartSystems Foundation on your PC and open the
SmartSystems console.
2 Make sure the SmartSystems console and the computers are on the same
subnet.
3 Make sure your computers are either in a communications dock or
charging dock, such as the AD14, or that power management is
disabled.
4 Download the device upgrade .exe file to your desktop PC.
5 Double-click the .exe file on your desktop PC. An InstallShield
application starts and walks you through the process of extracting the
upgrade files in the default location.
6 From the SmartSystems console, locate the device upgrade to install.
7 Drag-and-drop the device upgrade onto each computer you want to
upgrade. The SmartSystems console will tell you that it is installing the
upgrade on your computer.
Once the upgrade is done downloading to your computer, your computer
replaces the operating system and then automatically performs a cold-boot.
Progress messages appear on the computer screen.
Note: Do not change the default location where InstallShield extracts the
files. The SmartSystems console requires that the files be in this location.
The SmartSystems console will show your computer as offline (note the red
stop sign) until the computer reboots and reconnects to the system.
Chapter 4 — Developing and Installing Applications
78 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual 79
5
Troubleshooting and
Maintaining the Computer
If you encounter any problems while using the mobile computer, look in
this chapter to find a possible solution. You will also find information on
routine maintenance. This chapter contains these sections:
Calling Product Support
Troubleshooting the Computer
Resetting Your Computer
Cleaning the Scanner Window
Chapter 5 — Troubleshooting and Maintaining the Computer
80 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual
Calling Product Support
If you cannot find the answer to your problem in the “Troubleshooting the
Computer” section, you can visit the Intermec technical knowledge base
(Knowledge Central) at intermec.custhelp.com to review technical
information or to request technical support. If you still need help after
visiting Knowledge Central, you may need to call Product Support.
To talk to an Intermec Product Support representative, call:
1-800-755-5505
Before you call Intermec Product Support, make sure you have the
following information ready:
Operating system version
Configuration number
If you are using security, know the type (Funk or Microsoft) and the full
set of parameters
Power management settings
If you are using terminal emulation (TE), know the version and
protocol
If you are not using TE, know the language your custom application
was written in and the tools you used to create it
You can find most of the information listed above in Intermec Settings.
Consult your application developer for information on your custom
application.
To find your operating system version
1 Tap Start > Internet Explorer.
2 Tap the Intermec logo. The Intermec page appears and displays the
software build information.
To find your configuration number
Look at the label on the back of the computer.
Chapter 5 — Troubleshooting and Maintaining the Computer
741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual 81
Troubleshooting Your Computer
If you send the computer in for service, it is your responsibility to save the
computer data and configuration. Intermec is responsible only for ensuring
that the hardware matches the original configuration when repairing or
replacing the computer.
Problems While Operating the Computer
Problem Solution
You press the power key to turn on
the computer and nothing
happens.
Make sure the backlight is on.
Make sure you have a charged battery that is
installed correctly. For help, see “Installing and
Charging the Battery” on page 3.
The battery may be discharged. Replace the
battery with a spare charged battery, or charge the
battery.
Perform a warm boot or a cold boot.
The Battery status LED is on. The battery status LED indicates the following states:
If the battery status LED is a steady green, the
battery is more than 95% charged and computer is
on a charger.
If the battery status LED is blinking red, then the
battery is low. Replace or charge the battery.
If the battery status LED is a steady red, the main
battery is on charge.
The computer appears to be
locked up and you cannot enter
data.
Press the power key to turn off the computer, then
press the power key again to turn it on.
Press and hold the power key ten seconds to warm
boot the computer.
Try reloading the firmware. See “Upgrading the
System Software” on page 75.
If the computer does not boot or reset, contact
your Intermec representative for help.
You tap the screen and nothing
happens.
Align your screen. For help, see Aligning the Touch
Screen” on page 15.
Problems While Configuring the Computer
Problem Solution
You scan a configuration
command, such as Beeper Volume,
and you hear three low beeps.
If you are working in Intermec Settings, you cannot
scan configuration commands. Exit the application
to scan configuration commands.
You scan or enter an option for the
Scanner Model configuration
command and you hear three low
beeps.
You may have scanned or entered a Scanner Model
command that does not apply to the type of scanner
that you have installed. Try scanning or entering the
Scanner Model command again and select an option
for the type of device you are using.
Chapter 5 — Troubleshooting and Maintaining the Computer
82 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual
Problems With Wireless Connectivity
Problem Solution
When you turn on the computer
after it was suspended for a while
(10-15 minutes or longer), it can
no longer send or receive messages
over the network.
Host may have deactivated or lost current terminal
emulation session. In a TCP/IP direct connect
network, turn off the “Keep Alive” message from host
to maintain the TCP session while the computer is
suspended.
The Network Connection icon is
in the toolbar, but you cannot
establish a terminal emulation
session with the host computer.
There may be a problem with the host computer,
with the connection between the Intermec
Application Server and the host computer, or with
the connection between the access point and the host
computer. Check with network administrator to
make sure the host is running and allowing users to
login to the system.
The Network Connection icon is
in the toolbar, but the host
computer is not receiving any data
from the 751.
In a UDP Plus network, there may be a problem with
the connection between the Intermec Application
Server and the host computer. Check with network
administrator or see the users manual for the
Intermec Application Server.
In a TCP/IP network, there may be a problem with
the connection between the access point and the host
computer. Check with network administrator or use
your access point users manual.
Problems While Configuring 802.1x Security
Problem Solution
The 751 indicates that it is
authenticated, but it does not
communicate with the host.
Make sure the 751 IP address, host IP address,
subnet mask, default router are configured for
network.
The 751 does not appear to be
authenticating and a network
connection icon does not appear on
the toolbar.
The 751 may not be communicating with the
access point. Make sure the 751 network name
matches the access point network name (SSID).
802.1x security network may not be active. Make
sure the server software is properly loaded and
configured on the server PC. See server software
documentation for help.
A network connection icon appears
in the toolbar, but then disappears.
The 751 may not be communicating with the
intended access point. Make sure the 751 network
name matches the access point network name.
Default network name is “INTERMEC.
Access point may not be communicating with
server. Ensure the access point is turned on,
properly configured, and has 802.1x security
enabled.
You are setting up multiple access
points in a network, with different
SSIDs, and the connection fails.
The 751 does not save WEP key values when
changing the SSID. Reenter the WEP key value
after changing the SSID and save your changes.
You should now be able to connect to the different
access points.
Chapter 5 — Troubleshooting and Maintaining the Computer
741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual 83
The 751 indicates it is not
authenticated.
Make sure that:
the User Name and Password parameters on the
751 must match the user name and password on
authentication server. You may need to reenter
the password on both the 751, authentication
server.
on your authentication server, the user and
group are allowed and the group policy is
allowed to log into the server. For help, see the
documentation that shipped with your
authentication server software.
the IP address and secret key for access point
must match the IP address and secret key on
authentication server. You may need to reenter
the IP address and secret key on both your
access point and authentication server.
the authentication server software is running on
server PC.
You receive a message saying “The
server certificate has expired or your
system date is incorrect” after you
perform a clean boot on the 751.
Date and time are not saved when you perform a
clean boot. Reenter the date and time, and then
save your changes.
Problems While Configuring 802.1x Security (continued)
Problem Solution
Problems While Scanning Bar Codes
Problem Solution
You cannot see a red beam of light
from the scanner when you press the
Scan button and aim the scanner at
a bar code label.
You may be too far away from the bar code label.
Tr y.
You may be scanning the bar code label “straight
on.” Change the scanning angle and try again.
Move within two feet of a wall to test the effective
scan of the scanner.
When you release a Scan button or
handle trigger, the Good Read light
does not turn off.
The Good Read light will remain on if you
configure the computer to use continuous/edge
triggering. If you configure the computer for level
triggering and the Good Read light remains on,
there may be a problem. Press one of the Scan
buttons or pull the trigger again without scanning a
bar code label. If the light is still on, contact your
local Intermec representative.
Chapter 5 — Troubleshooting and Maintaining the Computer
84 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual
Resetting Your Computer
You rarely need to reset the computer. If the computer does not resume
after pressing the I/O key, or if the computer or an application is locked up,
you may need to reset it. The computer uses the configuration currently
saved in flash memory during the boot process. There are three ways to
reset the computer:
Warm booting the computer
Cold booting the computer
Clean booting the computer
Warm Booting the Computer
You may need to perform a warm boot to correct conditions where an
application stops responding to the system.
The input device attached to the
computer does not work well or read
bar code labels very quickly.
Set the Scanner Model command to the specific
attached input device. Check enabled bar code
symbologies and enable only the symbologies being
used.
The scanner will not read the bar
code label.
Aim the scanner beam to cross entire bar code
label in one pass. Vary the scanning angle.
Check the quality of the bar code label, Scan a
bar code label that you know will scan. Compare
the two bar code labels to see if the bar code
quality is too low. You may need to replace the
label that you cannot scan.
Make sure the bar code symbology is enabled.
Use Intermec Settings to check the symbologies.
Expand Data Collection > Symbologies
beneath devices listed (scanner, virtual wedge) to
check and enable symbologies, then scan the bar
code label again.
Make sure the computer application is expecting
input from a bar code. You may need to type
this information instead.
The scanner does not read the bar
code labels quickly, or the scanning
beam seems to be faint or obscured.
The scanner window may be dirty. Clean the
window with a solution of ammonia and water.
Wipe dry. Do not allow abrasive material to touch
the window.
You scan a valid bar code label to
enter data for your application. The
data decoded by the scan module
does not match the data encoded in
the bar code label.
The computer may have decoded the bar code label
in a symbology other than the label’s actual
symbology. Try scanning the bar code label again.
Make sure you scan the entire label.
Problems While Scanning Bar Codes (continued)
Problem Solution
Chapter 5 — Troubleshooting and Maintaining the Computer
741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual 85
To warm boot the computer
Press and hold the Power key for ten seconds.
The computer systematically shuts down, restarts, and goes through the
initialization process.
Cold Booting the Computer
In some cases where the computer completely stops responding, it may be
necessary to perform a cold boot. Because cold booting may result in data
loss, only use this method if all other recovery methods have failed.
To cold boot your computer
1 Release the lower clip of the hand strap and remove the battery pack.
2 Press the Reset button.
3 Reinstall the battery pack.
This illustration shows the back of the computer inside the battery compartment.
Clean Booting the Computer
When you clean boot the computer, it loads only those files and programs
that are absolutely required by the operating system. Use the clean boot to
troubleshoot the computer by getting it up and running so that you can
perform diagnostic tests to determine which elements of the normal boot
process are causing problems.
Note: Cold booting deletes all programs and data stored in RAM including
the Object Store. Make sure data is backed up to your host computer or a
storage card before performing a cold boot.
Reset button
The clean boot process will erase the memory in the mobile computer,
including all applications and data files found in the object store.
To preserve application programs through a clean boot, you must store
them in the Flash File Store.
Chapter 5 — Troubleshooting and Maintaining the Computer
86 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual
To clean boot the computer
1 Press the Power key to turn off the computer.
2 Release the lower clip of the hand strap and remove the battery pack.
3 Press the Reset button and then reinstall the battery pack.
4 Press and hold the Power key until the computer starts the boot
sequence and you see a warning message asking if you want to clean
boot the system.
5 Press the right side button to start the clean boot process.
6 When the message “Tap the screen to set up your Windows Mobile-
based device” appears on the screen, tap the screen with your stylus. You
will then be prompted to align the screen.
7 Follow the directions to align the screen. The computer continues with
the boot process.
8 Reset the time and date.
9 Reload any custom applications that may have been erased during the
clean boot.
Cleaning the Scanner Window and Screen
To keep the computer in good working order, you may need to clean the
scanner window.
Clean the scanner window as often as needed for the environment in which
you are using the computer. To clean the computer, use a solution of
ammonia and water.
To clean the scanner window and computer screen
1 Press the Power key to turn off the computer.
2 Dip a clean towel or rag in the ammonia solution and wring out the
excess.
3 Wipe off the scanner window and screen. Do not allow any abrasive
material to touch these surfaces.
4 Wipe dry.
There are no user-serviceable parts inside the computer. Opening the
unit will void the warranty and may cause damage to the internal
components.
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 87
A
Specifications
Appendix A — Specifications
88 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
Physical and Environmental Specifications
Use these specifications to locate technical information about the 741 and
751 and their available features and options.
Display
1/4 VGA Transflective, software-controlled backlight
Pixels: 240x320
Diagonal: 97 mm (3.8 in)
Colors: 256 K
Environmental
Operating Temperature: -20° to 60°C (-4° to 140°F)
Storage Temperature: -20° to 60°C (-4° to 140°F)
Relative Humidity: 5% to 95% noncondensing
Rain and Dust Resistance: IP64 compliant
Drop Specifications: 1.5 m (5 ft) drop
Expansion Slots
The 741 and 751 support Secure Digital (SD) cards and CompactFlash
(CF) Type II cards.
Integrated Scanner Options
Area imager, linear imager, 1D laser, and PDF417 laser.
Integrated Wireless
741 supports Bluetooth compatible module
751 supports 802.11b/g (Wi-Fi® certified) module
Keypad Option
Numeric and alphanumeric keypads are available.
Memory and Storage
RAM Memory: 64 MB (128 MB optional)
Flash ROM: 64 MB, includes ROM folder for application
storage
Microprocessor
Intel® XScale Processor, 400 MHz
Operating System
Microsoft® Windows® Mobile 5.0
Physical Dimensions
Length: 191 mm (7.53 in)
Width: 50 mm (1.97 in)
Height: 90 mm (3.50 in)
Weight: 483 to 568 g (17 to 20 oz)
Appendix A — Specifications
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 89
Power
Battery Type: Lithium-Ion (Li-ion), 7.2V, (2 x 2000 mAh
cells), customer-replaceable
Battery Capacity: 14.4 Watt-hours
Battery Life: 8 to 12 hours, application-dependent
Recharging Time: 4 hours
Charging Range: 0° to 40°C (32° to 104°F)
Regulator Approvals
UL and cUL Listed, UL 60950 and UL 1604 and CSA 22.2 #157, FCC
Part 15, TUV, CE mark
Standard Communications
RS-232, USB, IrDA 1.1, 10 Base-T Ethernet
Bar Code Symbologies
If you are using a scanner attached to the serial port, see your scanner
manual for a list of supported bar code symbologies.
If you are using the EA10 or EA11 area imager, your computer supports
these bar code symbologies:
EA10 and EA11Supported Symbologies
Codabar MSI
Codablock A PDF417
Codablock F Planet
•Code 11 •Plessey
Code 2 of 5 Postnet
•Code 39 •QR Code
•Code 93 •RSS 14
Code 128 •RSS Limited
Datamatrix RSS Expanded
EAN.UCC Composite Telepen
Interleaved 2 of 5 TLC 39
•Matrix 2 of 5 •UPC/EAN
MaxiCode
Micro PDF417
Appendix A — Specifications
90 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
If you are using the linear imager, the standard range laser, or the long range
laser, the computers support these bar code symbologies:
Scanner Reading Distances
Typical reading distances are done in an office environment using office
lights (4 lux). Minimum distances are measured in the dark (0 lux). Both
reading distances are provided in respective scan engine integration guides.
Contact your local Intermec representative for more information.
Below are minimum standard reading distances for the 741 and 751 built
with integrated scan engines. When correctly mounted, and exit window
reduces reading distances by about 4% for all scan engines, with the
exception of the EL10 with its reading distances reduced by about 25%.
Supported Symbologies
Codabar Micro PDF417
Codablock A •MSI
•Codablock F •PDF417
•Code 11 •Plessey
Code 2 of 5 RSS 14
•Code 39 •RSS Limited
•Code 128 •RSS Expanded
EAN.UCC Composite Telepen
Interleaved 2 of 5 TLC 39
•Matrix 2 of 5 •UPC/EAN
EA11 Standard Minimum Reading Distances With 0.04 Inch Setbacks
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mils)
0.20 mm (8 mils)
0.25 mm (10 mils)
0.5 mm (20 mils)
7.26 cm (2.86 in)
3.96 cm (1.56 in)
3.45 cm (1.36 in)
4.98 cm (1.96 in)
12.09 cm (4.76 in)
20.98 cm (8.26 in)
25.04 cm (9.86 in)
40.28 cm (15.86 in)
UPC/EAN 0.33 mm (13 mils) 4.98 cm (1.96 in) 29.62 cm (11.66 in)
PDF417 0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.25 cm (2.46 in)
4.47 cm (1.76 in)
4.98 cm (1.96 in)
13.87 cm (5.46 in)
21.74 cm (8.56 in)
33.43 cm (13.16 in)
Data Matrix 0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
3.71 cm (2.46 in)
5.98 cm (2.35 in)
*
16.41 cm (6.46 in)
20.73 cm (8.16 in)
27.58 cm (10.86 in)
* Minimum distance depends on symbology length and scan angle
Appendix A — Specifications
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 91
EA11 Standard Minimum Reading Distances With 0.04 Inch Setbacks
8"
4"
6"
2"
0"
2"
4"
in
6"
8"
10"
10"
cm
1
0
5
0
5
1
0
15
2
0
2
0
15
25
25
0 5040302010
0" 16"12"8"4"
PDF417 6.6 mils
0.125mm / 5mils
0.25 mm / 10 mils
0.5 mm / 20 mils
Data Matrix 7.5 mils
100% contrast UPC EAN
EL10 Minimum Guaranteed Reading Distances With 0.25 Inch Setbacks
Symbology Density Minimum Distance Maximum Distance
Code 39 0.10 mm (4 mils)
0.125 mm (5 mils)
0.25 mm (10 mils)
0.50 mm (20 mils)
1 mm (40 mils)
8.51 cm (3.35 in)
7.75 cm (3.05 in)
6.99 cm (2.75 in)
6.48 cm (2.55 in)
7.75 cm (3.05 in)
12.30 cm (4.45 in)
14.35 cm (5.65 in)
29.34 cm (11.55 in)
50.17cm (19.75 in)
63.37 cm (24.95 in)
UPC/EAN 0.33 mm (13 mils) 5.46 cm (2.15 in) 34.42 cm (13.55 in)
PDF417 0.17 mm (6.6 mil) 7.75 cm (3.05 in) 19.43 cm (7.65 in)
Appendix A — Specifications
92 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
EL10 Minimum Guaranteed Reading Distances With 0.25 Inch Setbacks
in
100% contrast UPC/EAN
cm
0 70605040302010
0" 28"24"20"16"12"8"4"
PDF417 6.6 mils
0.125 mm / 5 mils
0.25 mm / 10 mils
0.5 mm / 20 mils
1 mm / 40 mils
1
5
5
5
1
5
20
2
5
30
30
2
5
3
5
3
5
20
10
0
10
6"
2"
2"
6"
8"
10"
12"
12"
10"
14"
14"
8"
4"
0
4"
EV10 Minimum Reading Distances With 0.04 Inch Setbacks
Symbology Bar Code Content Density Minimum Distance Maximum Distance
Code 39 RESO 0.100 MM
R 0.125 MM
0.25
0.5
RIMM
0.10 MM (4 mils)
0.125 mm (5 mils)
0.25 mm (10 mils)
0.50 mm (20 mils)
1 mm (40 mils)
10.8 cm (4.26 in)
9.80 cm (3.86 in)
5.99 cm (2.36 in)
3.96 cm (1.56 in)
7.53 cm (2.96 in)
13.87 cm (5.46 in)
16.92 cm (6.66 in)
23.77 cm (9.36 in)
30.89 cm (12.16 in)
39.78 cm (15.66 in)
UPC/EAN 120010010100 0.33 mm (13 mils) 4.98 cm (1.96 in) 25.81 cm (10.16 in)
PDF417 10 mil
15 mil
0.254 mm (10 mils)
0.381 mm (15 mils)
9.80 cm (3.86 in)
7.77 cm (3.06 in)
16.92 cm (6.66 in)
18.95 cm (7.46 in)
Appendix A — Specifications
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 93
EV10 Minimum Reading Distances With 0.04 Inch Setbacks
Accessories
The following accessories are available for the 741 and 751. Note that this is
not a complete list. Contact your local Intermec service representative for
information about these and other accessories that are not in this list.
Accessory Description Part Number
AA8 Snap-on modem 225-687-002
AA9 DEX adapter 225-686-001
AA10 Long range tethered scanning adapter (3.3 V to 5 V) 225-686-002
AC15 Single battery charger 852-060-004
AC16 Quad battery charger 852-060-005
AD15 Single dock charger with USB and Ethernet 225-683-006
AD16 Modem dock 225-683-002
AD17 Multidock (charge only) 225-682-004
AD18 Multidock (charging with Ethernet support) 225-682-006
AH5 Standard scan handle 714-525-005
AV7 Vehicle dock 225-685-001
Appendix A — Specifications
94 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 95
I
Index
Index
96 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
Numerics
802.11 radio communications, configuring, 46
802.1x security
configuring, 52
troubleshooting, 81, 82
A
accessory list, 93
ActiveSync
using on your computer, 33
using to install applications, 70
Adding programs, with Windows Mobile, 32
ad-hoc networks, understanding, 47
Advanced Encryption Standard (AES),
description, 48
aligning screen, 15
Alpha mode
alphanumeric keypad, 12
numeric keypad, 11
ambient light sensor, 5
application
developing
new, 68
web-based, 68
installing
using ActiveSync, 70
using Avalanche, 72
using FTP server, 72
using SmartSystems Console, 70
using the SD card, 71
launching automatically, 74
area imager, scanning with, 17
association label, using to connect wireless
scanner, 41
audio system
external headset jack, 7
microphone, 6
speaker, 6
AutoRun
script commands, 74
using to launch other processes, 74
AutoRun.dat, 74
AutoRun.exe, 74
Avalanche
Enabler, InstallSelect component, 74
using to install applications, 72
using to remotely manage the 751, 72
B
backlight, adjusting keypad, 9
backup battery, 2
bar code symbologies
default, 16
supported, 89
bar codes, scanning, 16
battery
ambient light sensor, 5
backup battery, 2
capacity, 89
installing, 3
low battery conditions, 2
removing, 4
specifications, 89
status, 2
using, 2
viewing status, 2
beeper
adjusting volume, 7
enabling, 7
Block Recognizer, using, 28
Bluetooth
association label, 41
InstallSelect component, 74
resource kit user’s guide, 39
Scanner Wizard, using to add wireless
scanner, 41
Scanner Wizard, using to remove wireless
scanners, 42
settings, described, 40
turning radio on, 40
wireless printing, 42
wireless scanners, 41
booting
clean, 85
cold, 85
warm, 84
C
Calendar, using to notify, 30
calibrating screen, 15
calling product support, 80
capacitor, internal super, 2
card
SD, using to install applications, 71
supported types, 88
card, SD
using to install applications, 71
certificate
for security, described, 64
root, importing, 64
user, importing, 64
checking status of wireless connection, 47
CKIP, description, 48
clean boot
process, 85
storing files to rebuild system, 69
cleaning, scanner window and screen, 86
Index
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 97
cold booting, 85
COM port, for Bluetooth wireless printing, 42
command bar, using, 26
communications
802.11 radio, configuring, 46
Ethernet, configuring, 45
options, 89
USB, configuring, 45
CompactFlash cards, installing, 19
computer
shutdown, 2
stops responding, troubleshooting, 85
turning off, 3
volume, adjusting, 7
configuration number, finding on your
computer, 80
configuring
802.11 radio communications, 46
802.1x security
with Funk security, 52
commands, troubleshooting, 81
EAP-FAST security, 60
EAP-TLS security, 57
EAP-TTLS security, 58
Ethernet communications, 45
LEAP security
with Funk security, 53
with Profile Wizard, 59
local area networks, 44
Microsoft security, 62
parameters, 38
personal area networks, 39
remotely with SmartSystems, 39
security, 47
UDP network parameters, 46
USB communications, 45
WEP security
with Funk security, 53
with Microsoft security, 63
with Profile Wizard, 54
WPA security
with Funk security, 51
with Microsoft security, 63
WPA2 security
with Funk security, 51
with Microsoft security, 63
WPA2-PSK security
with Funk security, 51
with Microsoft security, 63
WPA-PSK security
with Funk security, 51
with Microsoft security, 63
contents of SDMMC Disk folder, 20
convert writing to text, 29
copy files, using ActiveSync, 33
customizing the computer, 32
D
Data Collection & Intermec Settings, InstallSelect
component, 74
developing applications, using the resource kits, 68
disabling
FTP server, 72
security, 65
DiskOnChip, storing applications, 69
display
specifications, 88
using, 13
DRAM, low battery shutdown, 2
E
EA11
reading distances
illustration, 91
table, 90
EAP, description, 49
EAP-FAST
configuring with Profile Wizard, 60
description, 49
EAP-PEAP, description, 49
EAP-TLS
configuring security, 57
description, 49
EAP-TTLS
configuring security, 58
description, 49
EL10
reading distances
illustration, 92
table, 91
environmental specifications, 88
Ethernet communications, configuring, 45
EV10
reading distances
illustration, 93
table, 92
Expansion slot specifications, 88
external headset jack, 7
F
File Explorer, using, 31
files, accessing on the SD card, 20
Flash File Store, using to install applications, 69
FTP server, using to install applications, 72
Index
98 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
Funk security
configuring
802.1x security, 52
LEAP security, 53
using Profile Wizard, 53
WEP, 53
WPA security, 51
WPA2-PSK, 51
WPA-PSK, 51
description, 50
selecting a profile, 50
Funk Wireless Security, InstallSelect
component, 74
G
green plane keys, using, 11
H
headset jack, 7
Hirose docking connector
headset jack, 7
microphone, 6
I
iConnect
checking status of wireless connection, 47
using to configure Funk security, 54
using to enable Ethernet, 45
icons, understanding screen, 14
IDL website, using to download smartsystems
foundation, 76
import root certificate, 64
import user certificate, 64
information, entering on computer, 27
infrastructure networks, understanding, 47
input panel
icon, 27
options, 27
installing
applications
using ActiveSync, 70
using Avalanche, 72
using FTP server, 72
using the SD card, 71
battery, 3
CompactFlash cards, 19
portions of SSPB to free up memory, 72
SD cards, 19
InstallSelect
understanding the components, 74
using to free up memory, 72
Intermec DHCP Client, InstallSelect
component, 74
Intermec part numbers, 93
Intermec Settings
navigating within, 38
using to configure computer, 38
using to connect a wireless scanner, 41
Internal scanners, specifications, 88
Internet Explorer
Mobile, using, 34
using to find OS version, 80
IVA functionality, description, 75
K
key sequences
alpha (green) keys, 11
entering, 10
orange keys, 10
keyboard, onscreen, 28
keypad
backlight, 9
illustrations, 9
key sequences, 10
options, 88
using numeric, 10
using the alphanumeric, 11
Knowledge Central web site, 80
L
launching applications automatically, 74
LEAP
description, 49
security
configuring with Funk security, 53
configuring with Profile Wizard, 59
local area networks, configuring, 44
locked up computer, troubleshooting, 81
low battery condition, 2
M
management protocol terminology, 48
memory
freeing up virtual for applications, 72
installing applications in, 69
specifications, 88
microphone, 6
microprocessor, specifications, 88
Microsoft security
configuring, 62
description, 50
selecting as security choice, 62
N
navigating in Intermec Settings, 38
navigation bar, using, 26
Notes program, converting writing to text, 29
Notification LED, understanding, 16
notifications, setting up, 30
Index
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 99
O
Object Store, storing applications, 69
onscreen keyboard, typing with, 28
operating system
finding version, 80
how to upgrade, 75
specifications, 88
operating temperature, 88
orange plane keys, using, 10
orange/white plane keys, using, 10
organizing information with File Explorer, 31
P
parameters, configuring, 38
passphrase, setting for Funk WPA-PSK, 52
PEAP security, configuring with Profile
Wizard, 56
performing a cold boot, 85
persistent storage manager, how to upgrade, 75
personal area networks, configuring, 39
physical
dimensions, 88
specifications, 88
plane keys
alpha, 12
using green, 11
using orange, 10
using orange/white, 11
pop-up menu, using, 27
Printer Support, InstallSelect component, 74
printing, wireless, 42
product support
calling, 80
Knowledge Central web site, 80
Profile Wizard
configuring EAP-FAST security, 60
configuring EAP-TLS security, 57
configuring EAP-TTLS security, 58
configuring LEAP security, 59
configuring PEAP security, 56
configuring WEP security, 54
configuring WPA2-PSK security, 56
configuring WPA-PSK security, 55
using to configure Funk security, 53
programs
adding or removing, 32
adding or removing Windows Mobile, 32
switching from Start menu, 25
R
radio, turning on Bluetooth, 40
reading distances
EA11 scanner, 90, 91
EL10 scanner, 91, 92
EV10 scanner, 92, 93
recharging time, 89
regulatory approvals, 89
remotely configuring computer, 39
removing
battery, 4
programs, Windows Mobile, 32
SD card, 21
reset button, 85
resetting the computer, 84
resource kits, smartsystems foundation, 76
root certificate, importing, 64
S
scanner
attaching to serial port, 18
internal, using, 16
options, 88
reading distances, 90
specifications, 88
troubleshooting, 83
window, cleaning, 86
scanning
area imager, 17
bar codes, 16
laser scanner, 16
linear imager, 16
PDF417 or Micro PDF417, 17
Scanning/Keypad Shift LED, understanding, 16
screen icons, understanding, 14
SD card
accessing files, 20
accessing files on, 20
attaching a tab, 20
installing, 19
removing, 21
specifications, 88
using to copy and install files, 71
using to install applications, 69, 71
using to upgrade computer, 75
SDMMC Disk folder, 20
security
certificates, overview, 64
choice, Funk or Microsoft, defined, 50
choosing between Funk and Microsoft, 50
configuring
802.1x, 52
LEAP, 53
WEP, 53
wireless, 47
disabling, 65
troubleshooting, 82
sending the computer for service, 81
Index
100 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
settings
adjusting Windows Mobile, 32
configuring with Intermec Settings, 38
SF51, connecting to, 41
SmartSystems
upgrading computer, 76
using to configure computer, 39
using to install applications, 70
SmartSystems Client & Intermec Settings,
InstallSelect component, 74
SmartSystems Console
using to install applications, 70
using to upgrade the computer, 76
SmartSystems Foundation
described, 70
downloading, 70
speaker
icon, using to adjust volume, 7
locating, 6
specifications, 88
bar code symbologies, 89
battery, 89
display, 88
environmental, 88
expansion slots, 88
integrated scanner options, 88
integrated wireless, 88
keypad options, 88
memory and storage, 88
microprocessor, 88
operating system, 88
physical dimensions, 88
regulatory approvals, 89
standard communications, 89
SR61, connecting to, 41
standard communications, specifications, 89
storage
cards, installing, 19
media, specifications, 88
specifications, 88
temperature, 88
stylus, using, 14
support
calling product, 80
symbologies, supported bar code, 89
synchronizing
computer with ActiveSync, 33
system time on computer, 39
system time, 39
T
TE, 14
TE 2000 screen, 14
temperatures
battery, 89
specifications, 88
tethered scanners, attaching, 19
text, selecting to edit, 29
time server, synchronizing with, 39
TKIP, description, 48
Today screen, using, 25
touch screen
aligning, 15
using, 13
Transcriber, using, 29
troubleshooting
802.1x security, 82
configuring the computer, 81
operating the computer, 81
scanning bar codes, 83
wireless connection, 82
with a clean boot, 85
TTLS security, configuring, 58
turning off computer, 3
typing with onscreen keyboard, 28
U
UDP Plus network, configuring parameters, 46
upgrading
downloading files, 75
operating system
overview, 75
persistant storage manager
overview, 75
using SmartSystems console, 76
USB communications, configuring, 45
user certificate, importing, 64
V
vibrate feature, enabling, 8
virtual memory, freeing up, 72
volume, adjusting, 7
W
warm booting, 84
Wavelink Avalanche, using to install
applications, 72
web enrollment, using to import user
certificate, 65
web-based application, developing, 68
WEP security
configuring
with Funk security, 53
with Microsoft security, 63
with Profile Wizard, 54
Index
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 101
Windows Mobile
ActiveSync, 33
Block Recognizer, 28
command bar, using, 26
entering information, 27
File Explorer, using, 31
Internet Explorer, 34
navigation bar, 26
pop-up menu, using, 27
switching programs, 25
Today screen, using, 25
Transcriber, using, 29
web site, 33
wireless connection
checking status, 47
troubleshooting, 82
wireless network
security, configuring, 47
specifications, 88
terminology, 48
wireless options, 88
wireless printing
choosing the printer from a list, 44
configuring Bluetooth communications, 42
creating an application to open the COM
port, 42
current wireless printer, selecting, 43
manually entering the device address, 44
wireless scanner
configuring Bluetooth communications, 41
connecting to with association label, 41
connecting to with Intermec Settings, 41
removing from computer, 42
WPA security
configuring
with Funk security, 51
with Microsoft security, 63
description, 48
WPA2
configuring, 51
description, 48
security, configuring with Microsoft
security, 63
WPA2-PSK security
configuring
with Funk security, 51
with Microsoft security, 63
with Profile Wizard, 56
WPA-PSK security
configuring
with Funk security, 51
with Microsoft security, 63
with Profile Wizard, 55
writing onscreen, converting to text, 29
Index
102 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
*935-009-001*
P/N 935-009-001
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Intermec 751 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Intermec 751 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info