800612
14
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
14
GB
HOW TO ASSEMBLE
CAUTION: Do not connect the unit to the main power, before
assembling the unit completely and properly.
The only tool you need to carry out this mounting procedure is a screwdriver.
BODY ASSEMBLY
1. Loosen and remove the four screws (04) from the bars (02). Then cross bar A and bar B so
that they interlock. Be sure to align the four holes in the bars with the Outer Tube. Tighten
the Outer tube to the bars with the four screws.
2. Attach the four base caps to the base ends.
3. Loosen and remove the Height Adjustment Collar (06) from the top of the Inner Tube. Put
the Base Decorative Cap (05) down to the base through the tube inside.
4. Replace the Height Adjustment Collar (06) on top of the Inner Tube (03). Pull the Inner Tube
(03) out from the Outer Tube to adjust the tube to the desired height and tighten the collar.
5. Slightly loosen the Switch rotated ring (07) by turning it anticlockwise. Put the Switch
Box down over the Inner Tube and tighten the Switch rotated ring. Make sure it is tightly
secured.
FAN GRILL ASSEMBLY
6. Remove locking nut (08) by turning it anticlockwise from the motor axial.
7. Place the back safety grill (10) into position. The slots on the grill should align with the
plastic rod on the front motor cover. If this is done correctly, the safety grill’s carry handle
will be at the top.
8. Fix the back safety grill (10) into position by replacing the locking nut (08) tightly by hand.
Do not force the locking nut.
9. The groove in the centre of the fan blade (11) aligns with bolt on the motor axial to ensure
correct positioning.
10. Fix the blade into motor axial by gently hand and tightening blade lock (09) by
anticlockwise onto the end of the motor axial.
11. Use 3 screws to install the decorative ring in the middle of front aafety grill.
12. Mount the front Safety Grill(12) onto the back safety Grill(10) by hanging the
top hook clip of front grille over the top of the back safety grill. Close the clasps all around
the grill, nally t the nut and screw through the hole in the bottom edge of the front grill
and tighten.
HOW TO USE
Speed control
The fan speed is controlled by means of a control panel with button. To turn on the
fan simply press one of the speed control keys (1-2-3). To turn it off, press the “O” key.
Oscillation Mode
By pushing down the oscillating level the fan oscillates. When the level is pulled up, the
oscillation function is deactivated.
Inclination adjustment
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Innoliving INN-503 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Innoliving INN-503 in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 0.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info