[ Edit: 2012/ 7/ 6 Model: V36-D ]
Use the following steps to mount the
license plate:
Before mounting the license plate, confirm
that the following parts are enclosed in the
plastic bag.
. License plate bracket
. J-nut 6 2
. Screw 6 2
. Screw grommet 6 2
Only use the recommended mounting
position, otherwise the Intelligent Cruise
Control (ICC) sensor obstruction (if so
equipped) may result.
SEDAN
GUID-5895C78E-057F-4431-9277-C9151DE76A20
1. Park the vehicle on flat, level ground.
2. Locate the center position
*
A
as
illustrated. Position the license plate
bracket at a distance of approximately
0.35 in (9 mm)
*
B
from the bottom of
the bumper. Hold the license plate
bracket in place.
3. Mark the center of the hole
*
C
with a
felt-tip pen.
4. Carefully drill two pilot holes using a
0.39 in (10 mm) drill bit at the marked
locations. (Be sure that the drill only
goes through the bumper fascia.)
5. Insert grommets into the hole on the
fascia.
6. Insert a flat-blade screwdriver into the
grommet hole to add 908 turn onto the
part
*
D
.
7. Insert a J-nut into the license plate
bracket before placing the license plate
bracket on the fascia.
8. Install the license plate bracket with
screws.
9. Install the license plate with bolts that
are no longer than 0.55 in (14 mm).
Technical and consumer information 9-15
Condition:
