489365
1
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
CUISINIERE
Mode d’emploi
Français, 1
FR
FR
GB
English,13
Sommaire
Installation, 2-5
Positionnement et nivellement
Raccordement électrique
Raccordement gaz
Adaptation aux différents types de gaz
Caractéristiques techniques
Tableau Caractéristiques des brûleurs et des
injecteurs
Description de l’appareil, 6
Vue d’ensemble
Tableau de bord
Mise en marche et utilisation,7-10
Utilisation du plan de cuisson
Mise en marche du four
Programmes de cuisson
Conseils pratiques pour l’utilisation des plaques
électriques
Conseils de cuisson
Tableau de cuisson au four
Précautions et conseils, 11
Sécurité générale
Mise au rebut
Economies et respect de l’environnement
Nettoyage et entretien, 12
Mise hors tension
Nettoyage de l’appareil
Remplacement de l’ampoule d’éclairage du four
Entretien robinets gaz
Assistance
KN3T62SA/NL
KN3T65SA/NL
Nederland, 25
NL
22
22
2
FR
! Conservez ce mode d’emploi pour pouvoir le
consulter à tout moment. En cas de vente, de cession
ou de déménagement, veillez à ce qu’il suive
l’appareil.
! Lisez attentivement les instructions : elles
contiennent des conseils importants sur l’installation,
l’utilisation et la sécurité de votre appareil.
! L’installation de l’appareil doit être effectuée par un
professionnel du secteur conformément aux
instructions du fabricant.
! N’importe quelle opération de réglage, d’entretien,
etc., doit être effectuée après avoir débranché la prise
de la cuisinière.
Conditions réglementaires d’installation
Le raccordement gaz devra être fait par un
professionnel qualifié qui assurera la bonne
alimentation en gaz et le meilleur réglage de la
combustion des brûleurs. Ces opérations
d’installation, quoique simples, sont délicates et
primordiales pour que votre cuisinière vous rende le
meilleur service. L’installation doit être effectuée
conformément aux textes réglementaires et règles de
l’art en vigueur, notamment:
Arrêté du 2 août 1977. Règles techniques et de
sécurité applicables aux installations de gaz
combustibles et d’hydro-carbures liquéfiés situées
à l’intérieur des bâtiments d’habitation et de leur
dépendances.
Norme DTU P45-204. Installations de gaz
(anciennement DTU n° 61-1-installations de gaz -
Avril 1982 + additif n°1 Juillet 1984).
Règlement sanitaire départemental.
Aération des locaux
L’appareil doit être installé dans des locaux qui sont
aérés en permanence, selon les prescriptions des
Normes en vigueur dans le pays d’installation. Il est
indispensable que la pièce où l’appareil est installé
dispose d’une quantité d’air égale à la quantité d’air
comburant nécessaire à une bonne combustion du
gaz (le flux d’air doit être d’au moins 3 m
3
/h par kW de
puissance installée).
Les prises d’air, protégées par des grilles, doivent
disposer d’un conduit d’au moins 2 cm2 de section
utile et dans une position qui leur évite tout risque
d’être bouchées accidentellement, même
partiellement (voir figure A).
Ces ouvertures doivent être agrandies de 100%
(surface minimale 2 cm2) en cas d’appareils
dépourvus du dispositif de sécurité de flamme et
quand l’afflux de l’air provient de manière indirecte de
pièces voisines (voir figure B) – à condition qu’il ne
s’agisse pas de parties communes du bâtiment, de
chambres à coucher ou de locaux à risque d’incendie
– équipées d’un conduit d’aération avec l’extérieur
comme décrit plus haut.
A B
! Après une utilisation prolongée de l’appareil, il est
conseillé d’ouvrir une fenêtre ou d’augmenter la
vitesse de ventilateurs éventuels.
Evacuation des fumées de combustion
La pièce doit prévoir un système d’évacuation vers
l’extérieur des fumées de combustion réalisé au
moyen d’une hotte reliée à une cheminée à tirage
naturel ou par ventilateur électrique qui entre
automatiquement en fonction dès qu’on allume
l’appareil (voir figures).
! Les gaz de pétrole liquéfiés, plus lourds que l’air, se
déposent et stagnent dans le bas. Les locaux qui
contiennent des bouteilles de G.P.L doivent donc
prévoir des ouvertures vers l’extérieur afin de permettre
l’évacuation du gaz par le bas en cas de fuites
accidentelles. Ne pas installer ou entreposer de
bouteilles de GPL, vides ou partiellement pleines, dans
des locaux qui se trouvent en sous-sol (caves etc.). Ne
gardez dans la pièce que la bouteille que vous êtes en
train d’utiliser, loin de sources de chaleur (fours, feux
de bois, poêles etc.) qui pourraient amener sa
température à plus de 50°C.
A
Evacuation par cheminée ou
conduit de fumée ramifié (réservé
aux appareils de cuisson)
Installation
Local adjacent Local à ventiler
Ouverture de ventilation
pour l’air comburant
Agrandissement de la
fissure entre la porte et
le sol
Evacuation
directement à
l’extérieur
FR
33
33
3
Positionnement et nivellement
! L’appareil peut être installé à côté de meubles dont
la hauteur ne dépasse pas celle du plan de cuisson.
! Assurez-vous que le mur en contact avec la paroi
arrière de l’appareil est réalisée en matériel ignifuge
résistant à la chaleur (T 90°C).
Pour une installation correcte :
installez cet appareil dans une cuisine, une salle à
manger ou un studio (jamais dans une salle de
bains);
si le plan de cuisson de la cuisinière dépasse le
plan de travail des meubles, ces derniers doivent
être placés à au moins 200 mm de l’appareil;
• si la cuisinière est
installée sous un
élément suspendu, il
faut que ce dernier soit
placé à au moins 420mm
de distance du plan. Il
faut prévoir une distance
de 700mm si les
éléments suspendus sont
inflammables (
voir
figure
);
ne placez pas de rideaux derrière la cuisinière ou
sur ses côtés à moins de 200 mm de distance;
pour l’installation de hottes, conformez-vous aux
instructions de leur notice d’emploi.
Nivellement
Pour mettre l’appareil bien à
plat, vissez les pieds de
réglage fournis aux
emplacements prévus aux
coins à la base de la cuisinière
(voir figure).
Montage des pieds* par
encastrement sous la base.
Raccordement électrique
Montez sur le câble une prise normalisée pour la
charge indiquée sur l’étiquette des caractéristiques
(
voir tableau des caractéristiques techniques
).
En cas de raccordement direct au réseau, il faut
intercaler entre l’appareil et le réseau un interrupteur à
coupure omnipolaire ayant au moins 3 mm
d’écartement entre les contacts, dimensionné à la
charge et conforme aux normes NFC 15-100 (le fil de
terre ne doit pas être interrompu par l’interrupteur). Le
câble d’alimentation ne doit atteindre, en aucun point,
des températures dépassant de 50°C la température
ambiante.
Avant de procéder au branchement, assurez-vous que :
la prise est bien munie d’une terre conforme à la loi;
la prise est bien apte à supporter la puissance
maximale de l’appareil, indiquée sur la plaquette
signalétique;
la tension d’alimentation est bien comprise entre les
valeurs indiquées sur la plaquette signalétique;
la prise est bien compatible avec la fiche de
l’appareil. Si ce n’est pas le cas, remplacez la prise
ou la fiche, n’utilisez ni rallonges ni prises multiples.
! Après installation de l’appareil, le câble électrique et
la prise de courant doivent être facilement
accessibles
! Le câble ne doit être ni plié ni excessivement écrasé.
! Le câble doit être contrôlé périodiquement et ne
peut être remplacé que par un technicien agréé.
! Nous déclinons toute responsabilité en cas de
non respect des normes énumérées ci-dessus.
Raccordement gaz
Pour raccorder l’appareil au réseau de distribution du
gaz ou à la bouteille de gaz utilisez un tuyau flexible
en caoutchouc ou en acier, conformément à la
réglementation en vigueur. Assurez-vous auparavant
que l’appareil est bien réglé pour le type de gaz
d’alimentation utilisé (
voir étiquette sur le couvercle :
autrement voir ci-dessous
). Si l’alimentation s’effectue
avec du gaz liquide en bouteille, utilisez des
régulateurs de pression conformes à la
réglementation en vigueur dans le pays. Pour
simplifier le raccordement, l’alimentation du gaz est
orientable latéralement* : inversez l’about annelé avec
le bouchon de fermeture et remplacez le joint
d’étanchéité (
fourni avec l’appareil
).
! Pour un fonctionnement en toute sécurité, pour un
meilleur emploi de l’énergie et une plus longue durée
de vie de l’appareil, vérifiez que la pression
d’alimentation respecte bien les valeurs indiquées
dans le tableau Caractéristiques des brûleurs et des
injecteurs (voir ci-dessous).
*N’existe que sur certains modèles
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.
44
44
4
FR
Raccordement gaz par tuyau flexible en caoutchouc
Assurez-vous que le tuyau est bien conforme aux
normes applicables dans le pays d’installation. Le
tuyau doit avoir un diamètre intérieur de : 8 mm en cas
d’alimentation au gaz liquide; 15 mm en cas
d’alimentation au gaz naturel.
Après avoir effectué le raccordement, assurez-vous
que le tuyau :
ne touche en aucun point à des parties pouvant
atteindre plus de 50°C;
ne soit pas soumis à traction ou torsion et ne
présente pas de pliures ou étranglements;
ne risque pas d’entrer en contact avec des corps
tranchants, des arêtes vives, des parties mobiles et
ne soit pas écrasé;
puisse être facilement contrôlable sur toute sa
longueur pour vérifier son état de conservation;
ait moins de 1500mm de long;
soit bien fixé à ses deux extrémités à l’aide de
bagues de serrage conformes à la réglementation
en vigueur dans le pays.
! Si une ou plusieurs de ces conditions ne peuvent
être remplies ou que la cuisinière est installée dans
des conditions de classe 2 – sous-classe 1 (appareil
encastré entre deux meubles), il faut utiliser un tuyau
flexible en acier (
voir ci-dessous
).
Raccordement gaz par tuyau flexible en acier inox,
à paroi continue avec raccords filetés
Assurez-vous que le tuyau et les joints sont bien
conformes aux normes applicables dans le pays
d’installation.
Pour installer le tuyau, enlevez l’about annelé équipant
l’appareil (le raccord d’entrée du gaz à l’appareil est
fileté 1/2 gaz mâle cylindrique).
! Procédez au raccordement de manière à ce que la
longueur du tuyau ne dépasse pas 2 mètres
d’extension maximale. Veillez à ce que le tuyau ne
soit pas écrasé et ne touche en aucun point à des
parties mobiles.
Vérification de l’étanchéité
Une fois l’installation terminée, vérifiez l’étanchéité de
tous les raccords en utilisant une solution
savonneuse, n’utilisez jamais de flamme.
Adaptation aux différents types de gaz
L’appareil peut être adapté à un type de gaz autre
que celui pour le quel il a été conçu (indiqué sur
l’étiquette de réglage sur le couvercle).
Adaptation du plan de cuisson
Remplacement des injecteurs des brûleurs du plan de
cuisson:
1.enlevez les grilles du plan de cuisson et sortez les
brûleurs de leur logement;
2. dévissez les injecteurs à
l’aide d’une clé à tube de 7mm
(voir figure), et remplacez-les
par les injecteurs adaptés au
nouveau type de gaz (voir
tableau Caractéristiques des
brûleurs et des injecteurs) ;
3.remontez les différentes parties en effectuant les
opérations dans le sens inverse.
Réglage des minima des brûleurs du plan de
cuisson :
1.placez le robinet sur la position minimum;
2.enlevez le bouton et tournez la vis de réglage
positionnée à l’intérieur ou sur le côté de la tige du
robinet jusqu’à obtenir une petite flamme régulière;
! En cas de gaz liquides, il faut visser à fond la vis de
réglage ;
3.vérifiez si, en tournant rapidement le robinet du
maximum au minimum, le brûleur ne s’éteint pas.
! Les brûleurs du plan de cuisson ne nécessitent pas
de réglage de l’air primaire.
FR
55
55
5
CARACTERISTIQUES TECHNIQUES
Dimensions du
four HxLxP
34x39x41 cm
Volume
l 54
Dimensions
utiles du tiroir
chauffe-plats
largeur 42 cm
profondeur 44 cm
hauteur 23 cm
Tension et
fréquence
d'alimentation :
voir plaquette signalétique
Brûleurs
adaptables à n'importe quel type
de gaz parmi ceux indiqués sur
l'étiquette collée à l'intérieur du
portillon ou sur la paroi intérieure
gauche (visible après avoir sorti
le tiroir chauffe-plats).
ETIQUETTE
ENERGIE
Directive 2004/40/CE sur
l'étiquette d es fours é lectrique s
Norme EN 50304
Consommation énergie
convection forcee.
Fonction four : Ventile'
- Consommation énergie
convection naturelle.
Fonction four : Statique
Directives Communautaires:
2006/95/EC du 12/12/06 (Basse
Tension) et modifications
successives - 2004/108/EC du
15/12/04 (Compatibilité
Electromagtique) et
modifications successives -
2009/142/EC du 30/11/09 (Gaz) et
modifications successives
93/68/EC du 22/07/93 et
modifications successives -
2002/96/EC.
1275/2008 (Stand-by/ Off mode)
Tableau Caractéristiques des brûleurs et des injecteurs
ATTENTION! Le couvercle en verre
peut se casser s’il est chauffé. Il faut
éteindre tous les brûleurs et les
plaques électriques avant de le fermer.
Tableau 1 (pour la Hollande) Gaz naturel
 







   
     
     


    


    








S
S
TC
A
* A 15°C et 1013 mbar-gaz sec
Naturel G25 P.C.S. = 32,49 MJ/m
3
KN3T62SA/NL
KN3T65SA/NL
66
66
6
FR
Description de l’appareil
Grille du plan de cuisson
Tableau de bord
Support GRILLE
Support LECHEFRITE
GLISSIERES de
coulissement
niveau 3
niveau 2
niveau 1
Brûleur à gaz
Plateau du plan de cuisson
Pied de réglage
Pied de réglage
niveau 5
niveau 4
Vue d’ensemble
Tableau de bord
Boutons BRULEURS
du plan de cuisson
MINUTEUR
ELECTRONIQUE*
Knoppen
KOOKPLATEN
PROGRAMMAKNOP
THERMOSTAATKNOP
Controlelampje
THERMOSTAAT
Knop
TIMER*
gasbrander
ontsteking*
* N’existe que sur certains modèles
60
FR
77
77
7
Mise en marche et
utilisation
Utilisation du plan de cuisson
Allumage des brûleurs
Un petit cercle plein près de chaque bouton
BRULEUR indique le brûleur associé à ce dernier.
Pour allumer un brûleur du plan de cuisson :
1. approchez une flamme ou un allume-gaz ;
2. poussez sur le bouton du BRULEUR tout en le
tournant dans le sens inverse des aiguilles d’une
montre jusqu’au symbole grande flamme E.
3. pour régler la puissance de la flamme souhaitée,
tournez le bouton BRULEUR dans le sens inverse
des aiguilles d’une montre : sur la position
minimum C, sur la position maximum E ou sur une
position intermédiaire.
Si l'appareil est équipé
d'un allumage
électronique*
(X)
il faut
d'abord appuyer sur la
touche d'allumage,
repérée par le symbole
correspondant
, puis
pousser à fond et tourner
en même temps dans le
sens inverse des aiguilles d'une montre le bouton
BRULEUR pour l'amener en face du symbole grande
flamme, jusqu'à l'allumage.
! En cas d’extinction accidentelle des flammes,
éteignez le brûleur et attendez au moins 1 minute
avant de tenter de rallumer.
Pour éteindre le brûleur, tournez le bouton jusqu’à la
position d’arrêt
.
Si l’appareil est équipé d’un dispositif de sécurité*
de flamme (C), pousser sur le bouton BRULEUR
pendant 2-3 secondes pour garder la flamme
allumée et pour activer le dispositif.
Conseils pratiques pour l’utilisation des brûleurs
Pour un meilleur rendement des brûleurs et une
moindre consommation de gaz, utilisez des
casseroles à fond plat, munies de couvercle et d’un
diamètre adapté au brûleur:
Pour distinguer le type de brûleur reportez-vous aux
dessins figurant dans le paragraphe
"Caractéristiques des brûleurs et des injecteurs"
! Pour les modèles équipés d'une grille de réduction,
n'utilisez cette dernière que pour le brûleur auxiliaire
quand vous utilisez des casseroles ayant moins de
12 cm de diamètre.
Utilisation du four
! Lors de son premier allumage, faire fonctionner le
four à vide, porte fermée, pendant au moins une
heure en réglant la température à son maximum.
Puis éteindre le four, ouvrir la porte et aérer la pièce.
L’odeur qui se dégage est due à l’évaporation des
produits utilisés pour protéger le four.
! Avant toute utilisation, enlever les pellicules
plastiques sur les côtés de l’appareil
! Ne jamais poser d’objets à même la sole du four,
l’émail risque de s’abîmer.
1. Pour sélectionner le programme de cuisson
souhaité, tourner le bouton PROGRAMMES.
2. Choisir la température conseillée pour ce
programme ou celle qu’on préfère à l’aide du bouton
THERMOSTAT.
Un tableau de cuisson sert de guide et indique
notamment les températures conseillées pour
plusieurs préparations culinaires (
voir tableau
cuisson au four
).
En cours de cuisson, il est possible à tout moment
de :
modifier le programme de cuisson à l’aide du
bouton PROGRAMMES;
modifier la température à l’aide du bouton
THERMOSTAT;
interrompre la cuisson en ramenant le bouton
PROGRAMMES sur “0”.
! Il faut toujours enfourner les plats sur la grille
fournie avec l’appareil.
Voyant THERMOSTAT
Allumé, il signale la montée en chaleur du four. Il
s’éteint dès que la température sélectionnée est
atteinte. Le voyant s’allume et s’éteint tour à tour
pour indiquer que le thermostat fonctionne et
maintient la température au degré près.
* N’existe que sur certains modèles
X
C
Brûleur ø Diatre récipients (cm)
Rapid(R) 2426
TripleCouronne(TC) 2426
SemiRapide(S) 1620
Auxiliaire(A) 1014
88
88
8
FR
*N’existe que sur certains modèles
Eclairage du four
Pour l’allumer, amenez le bouton PROGRAMMES sur
une position autre que la position “0”. Il reste allumé
tant que le four est en marche. Si vous amenez le
bouton sur
88
88
8
, la lampe s’allume sans activer
aucune résistance.
Programmes de cuisson
! Pour tous les programmes, vous pouvez
sélectionner une température comprise entre 50°C et
MAX., sauf pour :
GRIL et DOUBLE GRIL (il est conseillé dans ce
cas de sélectionner MAX.);
DOUBLE GRIL VENTILE (il est conseillé de ne pas
dépasser 200°C).
Programme
FOUR PATISSERIE
Mise en marche de la résistance arrière et du
ventilateur pour obtenir une chaleur douce et
uniforme à l’intérieur du four. Ce programme est
particulièrement indiqué pour la cuisson de mets
délicats (comme des gâteaux levés par ex.) et
certains petits-fours sur trois niveaux en même
temps
Programme FOUR STATIQUE
Mise en marche des résistances de voûte et de
sole. Pour cette cuisson traditionnelle, ne cuisez que
sur un seul niveau pour avoir une meilleure diffusion
de la chaleur.
Programme FOUR VENTILE
Activation, à tour de rôle, de la résistance de sole et
de la résistance de voûte ainsi que de la turbine. La
chaleur est constante et bien répartie à l’intérieur du
four, l’air cuit et dore de façon uniforme en tous
points. Vous pouvez cuire au maximum sur deux
niveaux en même temps.
Programme FOUR VOUTE
Activation de la partie centrale de la résistance de
voûte. La température élevée et directe du gril est
conseillée pour tous les aliments qui exigent une
haute température en surface (steak de veau et de
bœuf, filet, entrecôte) Ce programme, idéal pour
griller de petites pièces permet de réduire la
consommation d’électricité. Attention à bien placer le
plat au milieu de la grille car, dans les coins, la
chaleur ne suffit pas à le cuire.
Programme DOUBLE GRIL
Un gril plus grand que d’habitude et au design novateur
qui augmente de 50% les performances de cuisson et
qui supprime les zones d’angle où la chaleur n’arrive
pas. Utilisez ce gril pour dorer de façon uniforme.
Programme DOUBLE GRIL VENTILE
Mise en marche de la résistance de voûte, de la
turbine et du tournebroche (si l’appareil en est
équipé). L’irradiation thermique unidirectionnelle
s’ajoute au brassage de l’air pour une répartition
uniforme de la chaleur dans l’enceinte du four. Plus
de risques de brûler vos aliments en surface et plus
grande pénétration de la chaleur. Très utile pour des
grillades rapides ou pour griller de grosses pièces
de viande sans utiliser le tournebroche.
! Les cuissons GRIL, DOUBLE GRIL et DOUBLE
GRIL VENTILE doivent avoir lieu porte fermée.
! En cas de cuisson en mode GRIL ou DOUBLE
GRIL, placez la grille au gradin 5 et la lèchefrite au
gradin 1 pour récupérer les jus de cuisson. En cas
de cuisson en mode DOUBLE GRIL VENTILE, placez
la grill au gradin 2 ou 3 et la lèchefrite au gradin 1
pour récupérer les jus de cuisson.
Minuteur électronique*
Permet d'afficher l'heure et de faire fonctionner la
minuterie au compte à rebours.
! Toutes les fonctions sont activées environ 7
secondes après leur sélection.
Remise à l'heure de l'horloge
Après raccordement à la ligne ou après une coupure
de courant, l'afficheur clignote sur :
0:000:00
0:000:00
0:00
Appuyez sur la touche
GG
GG
G
et sélectionnez l'heure
à l'aide des touches - et +. Appuyez sur les
touches sans les relâcher pour accélérer
l'avancement.
Pour toute remise à l'heure, procédez comme
susmentionné.
FR
99
99
9
*N’existe que sur certains modèles
Fonction minuterie
Pour accéder à cette fonction, appuyez sur la touche
nn
nn
n, l'écran affiche le symbole
nn
nn
n. A chaque pression
de la touche + correspond un avancement de 10
secondes jusqu'à 99 minutes 50 secondes.
Continuez à appuyer pour obtenir un avancement du
temps par augmentation d'une minute jusqu'à 10
heures maximum.
La touche
sert à revenir en arrière.
Une fois que la durée souhaitée a été sélectionnée,
le compte à rebours commence. Un signal sonore
retentit une fois le temps écoulé, pour l'arrêter
appuyez sur une touche quelconque.
Pour afficher l'heure, appuyez sur la touche
GG
GG
G, le
symbole
nn
nn
n indique que la fonction minuterie est
sélectionnée. 7 secondes après, l'écran revient
automatiquement à la fonction minuterie.
Utiliser le programmateur fin de cuisson*
1. Il faut avant tout remonter la sonnerie en faisant
faire un tour presque complet au bouton
PROGRAMMATEUR FIN DE CUISSON dans le sens
des aiguilles d’une montre.
2. Puis en faisant marche arrière, sélectionner le
temps désiré en amenant les minutes indiquées sur
le bouton PROGRAMMATEUR FIN DE CUISSON en
face du repère fixe du tableau de bord.
3. Une fois le temps écoulé, un signal sonore retentit
et le four s’éteint.
4. Quand le four est éteint, le programmateur fin de
cuisson peut être utilisé comme une simple
minuterie.
! Pour utiliser le four en fonctionnement manuel,
c’est-à-dire sans programmateur fin de cuisson,
amener le bouton PROGRAMMATEUR FIN DE
CUISSON en face du symbole 9.
Conseils de cuisson
! Pour vos cuissons ventilées n’utilisez pas les
gradins 1 et 5 : ils sont directement frappés par l’air
chaud qui pourrait brûler vos mets délicats.
! En cas de cuisson en mode BARBECUE ou
GRATIN, placez la lèchefrite au gradin 1 pour
récupérer les jus de cuisson.
MULTICUISSON
Utilisez les gradins 2 et 4 et placez au 2 les plats
qui exigent davantage de chaleur.
Placez la lèchefrite en bas et la grille en haut.
BARBECUE
Placez la grille au gradin 3 ou 4, enfournez vos
plats au milieu de la grille.
Nous conseillons de sélectionner le niveau
d’énergie maximum. Ne vous inquiétez pas si la
résistance de voûte n’est pas allumée en
permanence : son fonctionnement est contrôlé
par un thermostat.
PIZZA
Utilisez un plat en aluminium léger et enfournez-le
sur la grille du four.
Si vous utilisez la lèchefrite, vous prolongerez le
temps de cuisson et obtiendrez difficilement une
pizza croustillante.
Si vos pizzas sont bien garnies, n’ajoutez la
mozzarelle qu’à mi-cuisson.
1010
1010
10
FR
Tableau de cuisson
Programmes Aliments Poids (Kg) Niveau
enfournement
Préchauffag
e (minutes)
Température
préconisée
Durée
cuisson
(minutes)
Statique
Canard
Roast-beef
ti de porc
Biscuits
Tartes
1
1
1
-
1
3
3
3
3
3
15
15
15
15
15
200
200
200
180
180
65-75
70-75
70-80
15-20
30-35
Ventilé
Pizza (sur 2 niveaux)
Lasagnes
Agneau
Poulet rôti + pommes de terre
Maquereaux
Cake aux fruits
Choux (sur 2 niveaux)
Biscuits (sur 2 niveaux)
Génoise (sur 1 niveau)
Génoise (sur 2 niveaux)
Tartes salées
1
1
1
1+1
1
1
0.5
0.5
0.5
1
1.5
2 e 4
3
2
2 e 4
2
2
2 e 4
2 e 4
2
2 e 4
3
15
10
10
15
10
10
10
10
10
10
15
230
180
180
200
180
170
190
180
170
170
200
15-20
30-35
40-45
60-70
30-35
40-50
20-25
10-15
15-20
20-25
25-30
Voute
Soles et seiches
Brochettes de calmars et crevettes
Tranches de colin
Légumes grillés
1
1
1
1
4
4
4
3/4
5
5
5
5
Max
Max
Max
Max
8-10
6-8
10
10-15
Double Gril
Steaks de veau
telettes
Hamburgers
Maquereaux
Croque-monsieur
1
1
1
1
n.° 4
4
4
4
4
4
5
5
5
5
5
Max
Max
Max
Max
Max
15-20
15-20
7-10
15-20
2-3
Double Gril
Ventilé
Poulet grillé
Seiches
1.5
1.5
2
2
5
5
200
200
55-60
30-35
Four
Pâtisserie
Tartes
Tarte aux fruits
Cake aux fruits
Génoise
Crêpes farcies (sur 2 niveaux)
Petits gâteaux (sur 2 niveaux)
Friands au fromage (sur 2 niveaux)
Choux (sur 3 niveaux)
Biscuits (sur 3 niveaux)
Meringues (sur 3 niveaux)
0.5
1
0.7
0.5
1.2
0.6
0.4
0.7
0.7
0.5
3
2 ou 3
3
3
2 et 4
2 et 4
2 et 4
1, 3 et 5
1, 3 et 5
1, 3 et 5
15
15
15
15
15
15
15
15
15
15
180
180
180
160
200
190
210
180
180
90
20-30
40-45
40-50
25-30
30-35
20-25
15-20
20-25
20-25
180
FR
1111
1111
11
Précautions et conseils
! Cet appareil a été conçu et fabriqué conformément aux
normes internationales de sécurité.
Ces conseils sont fournis pour des raisons de sécurité et
doivent être lus attentivement.
Sécurité générale
Le plan de cuisson vitrocéramique résiste aux sautes
de température et aux chocs. N'oubliez toutefois pas
que des lames ou des ustensiles de cuisine pointus
peuvent casser la surface du plan de cuisson. En cas
de cassure, débranchez immédiatement l'appareil du
secteur, faites appel à un service après-vente agréé et
exigez l'utilisation de pièces détachées d'origine. Le
non respect de ces indications peut compromettre la
sécurité de l'appareil.
Si la surface de la table est fêlée, éteindre l'appareil
pour éviter tout risque d'électrocution.
Cet appareil a été conçu pour un usage familial, de
type non professionnel.
Cet appareil ne doit pas être installé en extérieur,
même dans un endroit abrité, il est en effet très
dangereux de le laisser exposé à la pluie et aux
orages.
Ne touchez pas à l’appareil si vous êtes pieds nus ou
si vous avez les mains ou les pieds mouillés ou
humides.
Cet appareil qui sert à cuire des aliments ne doit être
utilisé que par des adultes conformément aux
instructions du mode d'emploi. Toute autre
utilisation (comme par exemple le chauffage d'une
pièce) est impropre et donc dangereux. Le fabricant
décline toute responsabilité en cas de dommages
provoqués par un usage impropre ou erroné.
Cette notice concerne un appareil classe 1 (libre pose)
ou classe 2 - sous-classe 1 (encastré entre deux
meubles).
En cours de fonctionnement, les éléments
chauffants et certaines parties du four deviennent
très chaudes. Attention à ne pas les toucher et à
garder les enfants à distance.
Evitez que le cordon d’alimentation d’autres petits
électroménagers touche à des parties chaudes de
l’appareil.
Les orifices ou les fentes d’aération ou d’évacuation de la
chaleur ne doivent pas être bouchés
Utilisez toujours des gants de protection pour enfourner
ou sortir des plats du four.
N’utilisez pas de solutions inflammables (alcool,
essence..) à proximité de l’appareil lorsqu’il est en
marche.
Ne stockez pas de matériel inflammable dans la niche
de rangement du bas ou dans le four : si l’appareil était
par inadvertance mis en marche, il pourrait prendre feu.
Les surfaces intérieures du tiroir (s'il y en a un) peuvent
devenir chaudes.
Quand l’appareil n’est pas utilisé, assurez-vous toujours
que les boutons sont bien sur la position
•.
Ne tirez surtout pas sur le câble pour débrancher la
fiche de la prise de courant.
N’effectuez aucune opération de nettoyage ou
d’entretien sans avoir auparavant débranché la fiche de
la prise de courant.
En cas de panne, n’essayez en aucun cas d’accéder
aux mécanismes internes pour tenter de réparer
l’appareil. Faites appel au service d’assistance.
Ne posez pas d’objets lourds sur la porte du four
ouverte.
Mise au rebut
Mise au rebut du matériel d’emballage : conformez-
vous aux réglementations locales, les emballages
pourront ainsi être recyclés.
La Directive Européenne 2002/96/EC sur les Déchets des
Equipements Electriques et Electroniques (DEEE), exige
que les appareils ménagers usagés ne soient pas jetés
dans le flux normal des déchets municipaux. Les
appareils usagés doivent être collectés séparément afin
d’optimiser le taux de récupération et le recyclage des
matériaux qui les composent et réduire l’impact sur la
santé humaine et l’environnement. Le symbole de la
“poubelle barrée” est apposé sur tous les produits pour
rappeler les obligations de collecte séparée. Les
consommateurs devront contacter les autorités locales ou
leur revendeur concernant la démarche à suivre pour
l’enlèvement de leur vieil appareil.
Economies et respect de l’environnement
Pour faire des économies d’électricité, utilisez autant
que possible votre four pendant les heures creuses.
Pour vos cuissons au GRIL, DOUBLE GRIL et
DOUBLE GRIL VENTILE nous vous conseillons de
garder la porte du four fermée: vous obtiendrez de
meilleurs résultats tout en faisant de sensibles
économies d’énergie (10% environ).
Gardez toujours les joints propres et en bon état pour
qu’ils adhèrent bien à la porte et ne causent pas de
déperdition de chaleur.
1212
1212
12
FR
Mise hors tension
Avant toute opération de nettoyage ou d’entretien
coupez l’alimentation électrique de l’appareil.
Nettoyage de l’appareil
! Ne nettojez jamais l’appareil avec des nettoyeurs
vapeur ou haute pression.
Nettoyez l’extérieur émaillé ou inox et les joints en
caoutchouc à l’aide d’une éponge imbibée d’eau
tiède additionnée de savon neutre Si les taches sont
difficiles à enlever, utilisez des produits spéciaux.
Rincez abondamment et essuyez soigneusement.
N’utilisez ni poudres abrasives ni produits corrosifs.
Les grilles, les chapeaux, les couronnes et les
brûleurs du plan de cuisson sont amovibles et
peuvent ainsi être nettoyés plus facilement.
Lavez-les à l’eau chaude additionnée d’un
détergent non abrasif, éliminez toute incrustation
et attendez qu’ils soient parfaitement secs avant
de les remonter.
Nettoyez fréquemment l’extrémité des dispositifs
de sécurité* de flamme.
Nettoyez l’enceinte du four après toute utilisation,
quand il est encore tiède. Utilisez de l’eau chaude
et du détergent, rincez et séchez avec un chiffon
doux. Evitez tout produit abrasif.
Nettoyer la vitre de la porte avec des produits non
abrasifs et des éponges non grattantes, essuyer
ensuite avec un chiffon doux. Ne pas utiliser de
matériaux abrasifs ou de racloirs métalliques aiguisés
qui risquent de rayer la surface et de briser le verre.
Les accessoires peuvent être lavés comme de la
vaisselle courante y compris en lave-vaisselle.
Le couvercle
Pour le nettoyage des
modèles équipés de
couvercle en verre,
utilisez de l’eau tiède.
Evitez tout produit
abrasif. Vous pouvez
déposer le couvercle
pour simplifier le
nettoyage de la zone
arrière du plan de
cuisson : ouvrez-le
complètement et tirez vers le haut (
voir figure
).
! Evitez de refermer le couvercle si les brûleurs sont
allumés ou encore chauds.
Contrôler les joints du four
Contrôlez périodiquement l’état du joint autour de la
porte du four. S’il est abîmé, adressez-vous au service
après-vente le plus proche de votre domicile. Mieux
vaut ne pas utiliser le four tant qu’il n’est pas réparé.
Remplacement de l’ampoule d’éclairage
du four
1. Débranchez le four,
enlevez le couvercle en verre
du logement de la lampe (
voir
figure
).
2. Dévissez l’ampoule et
remplacez-la par une autre de
même type : tension 230 V, puissance 25 W, culot E
14.
3.Remontez le couvercle et rebranchez le four au
réseau électrique.
Assistance
Indiquez-lui :
le modèle de votre appareil (Mod.)
son numéro de série (S/N)
Ces informations figurent sur la plaquette
signalétique apposée sur votre appareil et/ou sur
son emballage.
Nettoyage et entretien
Nettoyage automatique du four par catalyse*
Dans certains modèles de four, les parois verticales intérieures sont revêtues
d’un émail poreux dit émail catalytique. Il a pour propriété de détruire les corps
gras sous l’effet de la chaleur. Ceci est possible quand la température des
parois dépasse 170°C.
En fin de cuisson, s’il y a encore des traces de graisse sur les parois
catalytiques, continuez à faire fonctionner le four, à vide, porte fermée, en
amenant le bouton FOUR sur la position MAX, pendant un laps de temps
compris entre 60 et 90 minutes selon le degré de salissure. Vous pouvez
accélérer le dégraissage en nettoyant les projections alimentaires plus
importantes avec un peu d’eau chaude et une brosse souple.
! L’émail catalytique est résistant mais il faut éviter :
de gratter l’émail avec des objets tranchants (couteaux …)
et d’utiliser des détergents ou des produits de nettoyage abrasifs, les propriétés
autonettoyantes de l’émail risqueraient autrement d’être détruites irrémédiablement.
*
N’existe que sur certains modèles
Operating Instructions
COOKER
GB
English,13
FR
GB
Français, 1
Contents
Installation, 14-17
Positioning and levelling
Electrical connection
Gas connection
Adapting to different types of gas
Table of burner and nozzle specifications
Table of characteristics
Description of the appliance, 18
Overall view
Control panel
Start-up and use, 19-22
Using the hob
Using the oven
Cooking modes
Timer
Practical cooking advice
Oven cooking advice table
Precautions and tips, 23
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 24
Switching the appliance off
Cleaning the appliance
Replacing the oven light bulb
Gas tap maintenance
Assistance
Nederland, 25
NL
KN3T62SA/NL
KN3T65SA/NL
14
GB
! Before operating your new appliance please read
this instruction booklet carefully. It contains
important information concerning the safe installation
and operation of the appliance.
! Please keep these operating instructions for future
reference. Make sure that the instructions are kept
with the appliance if it is sold, given away or moved.
! The appliance must be installed by a qualified
professional according to the instructions provided.
! Any necessary adjustment or maintenance must be
performed after the cooker has been disconnected
from the electricity supply.
Room ventilation
The appliance may only be installed in permanently-
ventilated rooms, according to current national
legislation. The room in which the appliance is
installed must be ventilated adequately so as to
provide as much air as is needed by the normal gas
combustion process (the flow of air must not be
lower than 2 m
3
/h per kW of installed power).
The air inlets, protected by grilles, should have a
duct with an inner cross section of at least 100 cm
2
and should be positioned so that they are not liable
to even partial obstruction (
see figure A
).
These inlets should be enlarged by 100% - with a
minimum of 200 cm
2
- whenever the surface of the
hob is not equipped with a flame failure safety
device. When the flow of air is provided in an
indirect manner from adjacent rooms (
see figure B
),
provided that these are not communal parts of a
building, areas with increased fire hazards or
bedrooms, the inlets should be fitted with a
ventilation duct leading outside as described above.
AB
! After prolonged use of the appliance, it is
advisable to open a window or increase the speed of
any fans used.
Disposing of combustion fumes
The disposal of combustion fumes should be
guaranteed using a hood connected to a safe and
efficient natural suction chimney, or using an electric
fan that begins to operate automatically every time
the appliance is switched on (
see figure
).
! The liquefied petroleum gases are heavier than air
and collect by the floor, therefore all rooms
containing LPG cylinders must have openings
leading outside so that any leaked gas can escape
easily.
LPG cylinders, therefore, whether partially or
completely full, must not be installed or stored in
rooms or storage areas that are below ground level
(cellars, etc.). Only the
cylinder being used should be stored in the room;
this should also be kept well away from sources
of heat (ovens, chimneys, stoves) that may cause
the temperature of the cylinder to rise above 50°C.
Positioning and levelling
! It is possible to install the appliance alongside
cupboards whose height does not exceed that of the
hob surface.
! Make sure that the wall in contact with the back of
the appliance is made from a non-flammable, heat-
resistant material (T 90°C).
To install the appliance correctly:
Place it in the kitchen, dining room or the bed-sit
(not in the bathroom).
If the top of the hob is higher than the cupboards,
the appliance must be installed at least 200 mm
away from them.
If the cooker is installed underneath a wall cabinet,
there must be a minimum distance of 420 mm
between this cabinet and the top of the hob.
This distance should be increased to 700 mm if
the wall cabinets are flammable (
see figure
).
A
Fumes channelled through
a chimney or branched
flue system reserved for
cooking appliances)
Installation
Adjacent room Room requiring
ventilation
Ventilation opening for
comburent air
Increase in the gap between
the door and the flooring
Fumes channelled
straight outside
15
GB
Do not position
blinds behind the
cooker or less than 200
mm away from its
sides.
Any hoods must be
installed according to
the instructions listed in
the relevant operating
manual.
Levelling
If it is necessary to level the
appliance, screw the
adjustable feet into the places
provided on each corner of the
base of the cooker (
see
figure
).
The legs* fit into the slots on
the underside of the base of
the cooker.
Electrical connection
Install a standardised plug corresponding to the
load indicated on the appliance data plate (
see
Technical data table
).
The appliance must be directly connected to the mains
using an omnipolar circuit-breaker with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The circuit-breaker must be
suitable for the charge indicated and must comply with
NFC 15-100 regulations (the earthing wire must not be
interrupted by the circuit-breaker). The supply cable
must be positioned so that it does not come into
contact with temperatures higher than 50°C at any point.
Before connecting the appliance to the power
supply, make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated by the data plate.
The voltage is in the range between the values
indicated on the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.
* Only available in certain models
! Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only.
! The manufacturer declines any liability should
these safety measures not be observed.
Gas connection
Connection to the gas network or to the gas cylinder
may be carried out using a flexible rubber or steel
hose, in accordance with current national legislation
and after making sure that the appliance is suited to
the type of gas with which it will be supplied (see the
rating sticker on the cover: if this is not the case
see
below
). When using liquid gas from a cylinder, install a
pressure regulator which complies with current national
regulations. To make connection easier, the gas
supply may be turned sideways*: reverse the position
of the hose holder with that of the cap and replace the
gasket that is supplied with the appliance.
! Check that the pressure of the gas supply is
consistent with the values indicated in the Table of
burner and nozzle specifications (
see below
). This
will ensure the safe operation and durability of your
appliance while maintaining efficient energy
consumption.
Gas connection using a flexible rubber hose
Make sure that the hose complies with current
national legislation. The internal diameter of the hose
must measure: 8 mm for liquid gas supply; 13 mm
for methane gas supply.
Once the connection has been performed, make
sure that the hose:
Does not come into contact with any parts that
reach temperatures of over 50°C.
Is not subject to any pulling or twisting forces and
that it is not kinked or bent.
Does not come into contact with blades, sharp
corners or moving parts and that it is not
compressed.
Is easy to inspect along its whole length so that
its condition may be checked.
Is shorter than 1500 mm.
Fits firmly into place at both ends, where it will be
fixed using clamps that comply with current
regulations.
16
GB
! If one or more of these conditions is not fulfilled or
if the cooker must be installed according to the
conditions listed for class 2 - subclass 1 appliances
(installed between two cupboards), the flexible steel
hose must be used instead (
see below
).
Connecting a flexible jointless stainless steel pipe
to a threaded attachment
Make sure that the hose and gaskets comply with
current national legislation.
To begin using the hose, remove the hose holder on the
appliance (the gas supply inlet on the appliance is a
cylindrical threaded 1/2 gas male attachment).
! Perform the connection in such a way that the hose
length does not exceed a maximum of 2 metres,
making sure that the hose is not compressed and
does not come into contact with moving parts.
Checking the connection for leaks
When the installation process is complete, check
the hose fittings for leaks using a soapy solution.
Never use a flame.
Adapting to different types of gas
It is possible to adapt the appliance to a type of gas
other than the default type (this is indicated on the
rating label on the cover).
Adapting the hob
Replacing the nozzles for the hob burners:
1. Remove the hob grids and slide the burners off
their seats.
2. Unscrew the nozzles using a
7 mm socket spanner (
see
figure
), and replace them with
nozzles suited to the new type
of gas(
see Burner and nozzle
specifications table
).
3. Replace all the components
by following the above
instructions in reverse.
Adjusting the hob burners’ minimum setting:
1. Turn the tap to the minimum position.
2. Remove the knob and adjust the regulatory
screw, which is positioned inside or next to the tap
pin, until the flame is small but steady.
! If the appliance is connected to a liquid gas
supply, the regulatory screw must be fastened as
tightly as possible.
3. While the burner is alight, quickly change the position
of the knob from minimum to maximum and vice versa
several times, checking that the flame is not
extinguished.
! The hob burners do not require primary air adjustment.
Adjusting the gas oven burner’s minimum setting:
1. Light the burner (
see Start-up and Use
).
2. Turn the knob to the minimum position (MIN) after
it has been in the maximum position (MAX) for
approximately 10 minutes.
3. Remove the knob.
4. Tighten or loosen the adjustment screws on the
outside of the thermostat pin (
see figure
) until the
flame is small but steady.
! If the appliance is connected to liquid gas, the
adjustment screw must be fastened as tightly as
possible.
5. Turn the knob from the MAX position to the MIN
position quickly or open and shut the oven door,
making sure that the burner is not extinguished.
17
GB
Table of burner and nozzle specifications
WARNING! The glass lid canWARNING! The glass lid can
WARNING! The glass lid canWARNING! The glass lid can
WARNING! The glass lid can
break in if it is heated up.break in if it is heated up.
break in if it is heated up.break in if it is heated up.
break in if it is heated up.
Turn off all the burners andTurn off all the burners and
Turn off all the burners andTurn off all the burners and
Turn off all the burners and
the electric plates beforethe electric plates before
the electric plates beforethe electric plates before
the electric plates before
closing the lid.closing the lid.
closing the lid.closing the lid.
closing the lid.
S
S
TC
A
TECHNICAL DATA
Oven dimensions
(LxDxH)
39x41x34 cm
Volume
54 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 23 cm
Power supply
voltage and
frequency
see data plate
Burners
may be adapted for use with any type of
gas shown on the data plate
ENERGY LABEL
Directive 2002/40/EC on the label of
electric ovens. Standard EN 50304
Energy consumption for Natural
convection – heating mode:
Static
;
Energy consumption for Forced
convection – heating mode:
Fan
Oven;
EC Directives: 06/95/EC dated 12/12/06
(Low Voltage) and subsequent
amendments –
04/108/EC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments –
93/68/EEC dated 22/07/93 and
subsequent amendments –
2002/96/EC.
1275/2008 Stand-by/ Off mode
Table1 (for Netherlands) Gaz naturel
 







   
     
     
     
     







* At 15°C et 1013 mbar-gas sec
Natural G25 P.C.S. = 32,49 MJ/m
3
KN3T62SA/NL
KN3T65SA/NL
18
GB
Description of the
appliance
Control panel
Overall view
THERMOSTAT
indicator light
THERMOSTAT
knob
Hob BURNER
control knobs
SELECTOR
knob
ELECTRONIC TIMER*
* Only available in certain models.
Hob grid
Glass cover
*
Control panel
GRILL rack
DRIPPING PAN
GUIDE RAILS
for the sliding racks
position 3
position 2
position 1
Gas burner
Containment
surface for spills
Adjustable foot
Adjustable foot
position 5
position 4
THERMOSTAT
indicator light
THERMOSTAT
knob
GAS BURNER
ignition button*
Hob BURNER
control knobs
SELECTOR
knob
TIMER
knob*
60
19
GB
Start-up and use
*
Only available in certain models.
X
C
Using the hob
Lighting the burners
For each BURNER knob there is a complete ring
showing the strength of the flame for the relevant burner.
To light one of the burners on the hob:
1. Bring a flame or gas lighter close to the burner.
2. Press the BURNER knob and turn it in an
anticlockwise direction so that it is pointing to the
maximum flame setting E.
3. Adjust the intensity of the flame to the desired level
by turning the BURNER knob in an anticlockwise
direction. This may be the minimum setting C, the
maximum setting E or any position in between the two.
If the appliance is fitted with an electronic lighting
device* (
X
), press the
ignition button, marked
with the symbol
1
, then
hold the BURNER knob
down and turn it in an
anticlockwise direction,
towards the maximum
flame setting, until the
burner is lit.The burner may be extinguished when
the knob is released. If this occurs, repeat the
operation, holding the knob down for a longer period
of time.
! If the flame is accidentally extinguished, switch off
the burner and wait for at least 1 minute before
attempting to relight it.
If the appliance is equipped with a flame failure
safety device*(C), press and hold the BURNER knob
for approximately 2-3 seconds to keep the flame
alight and to activate the device.
To switch the burner off, turn the knob until it
reaches the stop position •.
Practical advice on using the burners
For the burners to work in the most efficient way
possible and to save on the amount of gas
consumed, it is recommended that only pans that
have a lid and a flat base are used. They should
also be suited to the size of the burner:
Using the oven
! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
! Never put objects directly on the bottom of the oven;
this will avoid the enamel coating being damaged.
! Before operating the product, remove all plastic
film from the sides of the appliance.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the recommended temperature for the
cooking mode or the desired temperature by turning
the THERMOSTAT knob.
A list detailing cooking modes and suggested
cooking temperatures can be found in the relevant
table (
see Oven cooking advice table
).
During cooking it is always possible to:
Change the cooking mode by turning the
SELECTOR knob.
Change the temperature by turning the
THERMOSTAT knob.
Stop cooking by turning the SELECTOR knob to
the “0” position.
! Always place cookware on the rack(s) provided.
THERMOSTAT indicator light
When this is illuminated, the oven is generating
heat. It switches off when the inside of the oven
reaches the selected temperature. At this point the
light illuminates and switches off alternately,
indicating that the thermostat is working and is
maintaining the temperature at a constant level.
OPERATION indicator light
When this is illuminated, the oven is generating
heat.
Oven light
This is switched on by turning the SELECTOR knob
to any position other than “0”. It remains lit as long
as the oven is operating. By selecting
88
88
8
with the
knob, the light is switched on without any of the
heating elements being activated.
indicating that the thermostat is working and is
maintaining the temperature at a constant level.
Burner ø Cookware diameter (cm)
 
 
 
 
20
GB
Cooking modes
! A temperature value can be set for all cooking modes
between 50°C and Max, except for the following modes
GRILL and DOUBLE GRILL (recommended: set
only to MAX power level).
FAN-ASSISTED DOUBLE GRILL (recommended:
do not exceed 200°C).
BAKING mode
The rear heating element and the fan come on,
guaranteeing the distribution of heat delicately and
uniformly throughout the oven. This mode is ideal for
baking and cooking temperature sensitive foods
such as cakes that need to rise and to prepare
certain tartlets on 3 shelves simultaneously..
STATIC OVENSTATIC OVEN
STATIC OVENSTATIC OVEN
STATIC OVEN mode
Both the top and bottom heating elements will be
activated. When using this traditional cooking mode,
it is best to use only one rack at a time, otherwise
the heat will not be distributed evenly.
FAN OVEN FAN OVEN
FAN OVEN FAN OVEN
FAN OVEN mode
The top and bottom heating elements will switch on
and the fan will begin to operate. Since the heat
remains constant throughout the oven, the air cooks
and browns food in a uniform manner. A maximum
of two racks may be used at the same time.
OVEN TOPOVEN TOP
OVEN TOPOVEN TOP
OVEN TOP
mode
The central part of the top heating element is
switched on. The high and direct temperature of the
grill is recommended for food that requires a high
surface temperature (veal and beef steaks, fillet
steak and entrecôte). This cooking mode uses a
limited amount of energy and is ideal for grilling
small dishes. Place the food in the centre of the
rack, as it will not be cooked properly if it is placed
in the corners.
DOUBLE GRILL DOUBLE GRILL
DOUBLE GRILL DOUBLE GRILL
DOUBLE GRILL
mode
The top heating element and the rotisserie spit will
be activated.
This provides a larger grill than the normal grill
setting and has an innovative design that improves
cooking efficiency by 50% and eliminates the cooler
corner areas. Use this grilling mode to achieve a
uniform browning on top of the food.
FAN ASSISTED DOUBLE GRILL mode
The top heating element and the turnspit are
activated and the fan begins to operate. This
combination of features increases the effectiveness of
the unidirectional thermal radiation of the heating
elements through forced circulation of the air
throughout the oven. This prevents the food from
burning on top by enabling heat to penetrate into the
food more effectively; it is therefore an ideal way of
cooking food quickly under the grill or for grilling large
pieces of meat without having to use the turnspit.
! The GRILL, DOUBLE GRILL and FAN-ASSISTED
DOUBLE GRILL cooking modes must be performed
with the oven door shut.
! When using the GRILL and DOUBLE GRILL cooking
modes, place the rack in position 5 and the dripping pan
in position 1 to collect cooking residues (fat and/or
grease). When using the FAN-ASSISTED DOUBLE GRILL
cooking mode, place the rack in position 2 or 3 and the
dripping pan in position 1 to collect cooking residues.
Electronic timer*
This function displays the time and works as a timer
which counts down to zero.
! All functions will be implemented approximately 7
seconds after they have been set.
Resetting the clock
After the appliance has been connected to the
power supply, or after a power cut, the clock display
will begin to blink, showing the figure:
0:000:00
0:000:00
0:00
Press button
G G
G G
G and then buttons - and + to set
the exact time. Press and hold the buttons to
quicken the count upwards.
Any necessary modifications can be made by
repeating the above process.
Timer feature
This function may be accessed by pressing the
nn
nn
n
button, after which the display will show the symbol
nn
nn
n. Every time the + button is pressed it
corresponds to a time increase of 10 seconds, until
it reaches 99 minutes and 50 seconds. After this
point, each press of the button represents an
increase of one minute, up to a maximum of 10
hours.
Pressing the
- button reduces the time.
*
Only available in certain models.
21
GB
After the time period has been set, the timer will
begin to count down. When the timer reaches zero,
the buzzer will sound (this may be stopped by
pressing any button).
The time may be displayed by pressing the
GG
GG
G
button, and the
nn
nn
n symbol indicates that the timer
function has been set. After approximately 7
seconds, the display will automatically revert to the
timer.
Analogue Timer *
1. To set the buzzer, turn the COOKING TIMER knob
clockwise almost one complete revolution.
2. Turn the knob anticlockwise to set the desired
time: align the minutes shown on the COOKING
TIMER knob with the indicator on the control panel.
3. When the selected time has elapsed, a buzzer
sounds and the oven turns off.
4. When the oven is off the cooking timer can be
used as a normal timer.
! To use the oven manually, in other words when you
do not wish to use the end of cooking timer, turn the
COOKING TIMER knob until it reaches the 9
symbol.
*
Only available in certain models.
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-
assisted cooking. Excessive direct heat can burn
temperature sensitive foods.
! In the BARBECUE and GRATIN cooking modes,
place the dripping pan in position 1 to collect
cooking residues (fat and/or grease).
MULTI-COOKING
Use position 2 and 4, placing the food that
requires more heat on 2.
Place the dripping pan on the bottom and the rack
on top.
BARBECUE
Insert the rack in position 3 or 4. Place the food in
the centre of the rack.
We recommend that you set the maximum power
level. The top heating element is regulated by a
thermostat and may not always be on.
PIZZA
Use a light aluminium pizza pan. Place it on the
rack provided.
For a crispy crust, do not use the dripping pan
(prevents crust from forming by extending
cooking time).
If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
22
GB
Oven cooking advice table
Cooking
modes Foods
Weight
(in kg)
Rack position
Preheating time
(min)
Recommende
d Temperature
C)
Cooking time
(minutes)
Static
Duck
Roast veal or beef
Roast pork
Biscuits (shortcrust pastry)
Tarts
1
1
1
-
1
3
3
3
3
3
15
15
15
15
15
200
200
200
180
180
65-75
70-75
70-80
15-20
30-35
Fan-assisted
Pizza (on 2 racks)
Lasagne
Lamb
Roast chicken + potatoes
Mackerel
Sponge cake made with yoghurt
Cream puffs (on 2 racks)
Biscuits (on 2 racks)
Sponge cake (on 1 rack)
Sponge cake (on 2 racks)
Savoury pies
1
1
1
1+1
1
1
0.5
0.5
0.5
1
1.5
2 and 4
3
2
2 and 4
2
2
2 and 4
2 and 4
2
2 and 4
3
15
10
10
15
10
10
10
10
10
10
15
230
180
180
200
180
170
190
180
170
170
200
15-20
30-35
40-45
60-70
30-35
40-50
20-25
10-15
15-20
20-25
25-30
Oven Top
Sole and cuttlefish
Squid and prawn kebabs
Cod fillet
Grilled vegetables
1
1
1
1
4
4
4
3/4
5
5
5
5
Max
Max
Max
Max
8-10
6-8
10
10-15
Double Grill
Veal steak
Cutlets
Hamburgers
Mackerel
Toast
1
1
1
1
4 pcs
4
4
4
4
4
5
5
5
5
5
Max
Max
Max
Max
Max
15-20
15-20
7-10
15-20
2-3
Fan-assisted
Double Grill
Grilled chicken
Cuttlefish
1.5
1.5
2
2
5
5
200
200
55-60
30-35
Baking
Mode
Tarts
Fruit cakes
Plum cake
Sponge cake
Stuffed pancakes (on 2 racks)
Small cakes (on 2 racks)
Cheese puffs (on 2 racks)
Cream puffs (on 3 racks)
Biscuits (on 3 racks)
Meringues (on 3 racks)
0.5
1
0.7
0.5
1.2
0.6
0.4
0.7
0.7
0.5
3
2 or 3
3
3
2 and 4
2 and 4
2 and 4
1 and 3 and 5
1 and 3 and 5
1 and 3 and 5
15
15
15
15
15
15
15
15
15
15
180
180
180
160
200
190
210
180
180
90
20-30
40-45
40-50
25-30
30-35
20-25
15-20
20-25
20-25
180
23
GB
Precautions and tips
! This appliance has been designed and
manufactured in compliance with international safety
standards.
The following warnings are provided for safety
reasons and must be read carefully.
General safety
The glass ceramic hob is resistant to temperature
fluctuations and shocks. It is, however, wise to
remember that blades or cooking utensils may
ruin the surface of the hob. If this happens,
remove the plug of the cooker from the electricity
socket and contact an authorised Technical
Assistance Centre in order to request original
spare parts. Failure to comply with the above may
compromise the safety of the appliance.
If the surface of the hob is cracked, switch off the
appliance to prevent electric shocks from
occurring.
The appliance was designed for domestic use
inside the home and is not intended for
commercial or industrial use.
The appliance must not be installed outdoors, even
in covered areas. It is extremely dangerous to
leave the appliance exposed to rain and storms.
Do not touch the appliance with bare feet or with
wet or damp hands and feet.
The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions outlined in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous.
The manufacturer may not be held liable for
any damage resulting from improper, incorrect
and unreasonable use of the appliance.
The instruction booklet accompanies a class 1
(insulated) or class 2 - subclass 1 (recessed
between 2 cupboards) appliance.
When the appliance is in use, the heating
elements and some parts of the oven door
become extremely hot. Make sure you don't
touch them and keep children well away.
Make sure that the power supply cables of other
electrical appliances do not come into contact
with the hot parts of the oven.
The openings used for the ventilation and
dispersion of heat must never be covered.
Always use oven gloves when placing cookware
in the oven or when removing it.
Do not use flammable liquids (alcohol, petrol,
etc...) near the appliance while it is in use.
Do not place flammable material in the lower
storage compartment or in the oven itself. If the
appliance is switched on accidentally, it could
catch fire.
Always make sure the knobs are in the
position
when the appliance is not in use.
When unplugging the appliance, always pull the
plug from the mains socket; do not pull on the
cable.
Never perform any cleaning or maintenance work
without having disconnected the appliance from
the electricity mains.
If the appliance breaks down, under no
circumstances should you attempt to repair the
appliance yourself. Repairs carried out by
inexperienced persons may cause injury or further
malfunctioning of the appliance. Contact
Assistance.
Do not rest heavy objects on the open oven door.
Disposal
When disposing of packaging material: observe
local legislation so that the packaging may be
reused.
The European Directive 2002/96/EC relating to
Waste Electrical and Electronic Equipment
(WEEE) states that household appliances should
not be disposed of using the normal solid urban
waste cycle. Exhausted appliances should be
collected separately in order to optimise the cost
of re-using and recycling the materials inside the
machine, while preventing potential damage to
the atmosphere and to public health. The
crossed-out dustbin is marked on all products to
remind the owner of their obligations regarding
separated waste collection.
Exhausted appliances may be collected by the
public waste collection service, taken to suitable
collection areas in the area or, if permitted by
current national legislation, they may be returned
to the dealers as part of an exchange deal for a
new equivalent product.
All major manufacturers of household appliances
participate in the creation and organisation of
systems for the collection and disposal of old and
disused appliances.
Respecting and conserving the
environment
You can help to reduce the peak load of the
electricity supply network companies by using the
oven in the hours between late afternoon and the
early hours of the morning.
Always keep the oven door closed when using the
GRILL, DOUBLE GRILL and FAN-ASSISTED
DOUBLE GRILL modes: This will achieve better
results while saving energy (approximately 10%).
Check the door seals regularly and wipe them
clean to ensure they are free of debris so that
they adhere properly to the door, thus avoiding
heat dispersion.
24
GB
Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the appliance
! Do not use abrasive or corrosive detergents such as
stain removers, anti-rust products, powder detergents or
sponges with abrasive surfaces: these may scratch the
surface beyond repair.
! Never use steam cleaners or pressure cleaners on the
appliance.
It is usually sufficient simply to wash the hob using a
damp sponge and dry it with absorbent kitchen roll.
The stainless steel or enamel-coated external parts and
the rubber seals may be cleaned using a sponge that
has been soaked in lukewarm water and neutral soap.
Use specialised products for the removal of stubborn
stains. After cleaning, rinse well and dry thoroughly. Do
not use abrasive powders or corrosive substances.
The hob grids, burner caps, flame spreader rings
and the hob burners can be removed
to make cleaning easier; wash them in hot water and
non-abrasive detergent, making sure all burnt-on
residue is removed before drying them thoroughly.
For hobs with electronic ignition, the terminal part of the
electronic lighting devices should be cleaned
frequently and the gas outlet holes should be checked
for blockages.
The inside of the oven should ideally be cleaned after
each use, while it is still lukewarm. Use hot water and
detergent, then rinse well and dry with a soft cloth. Do
not use abrasive products.
Clean the glass part of the oven door using a sponge
and a non-abrasive cleaning product, then dry
thoroughly with a soft cloth. Do not use rough abrasive
material or sharp metal scrapers as these could
scratch the surface and cause the glass to crack.
The accessories can be washed like everyday
crockery, and are even dishwasher safe.
Stainless steel can be marked by hard water that has
been left on the surface for a long time, or by
aggressive detergents containing phosphorus. After
cleaning, rinse well and dry thoroughly. Any remaining
drops of water should also be dried.
The cover
If the cooker is fitted with a
glass cover, this cover
should be cleaned using
lukewarm water. Do not use
abrasive products.
It is possible to remove the
cover in order to make
cleaning the area behind
the hob easier. Open the
cover fully and pull it
upwards (
see figure
).
! Do not close the cover when the burners are alight or
when they are still hot.
Inspecting the oven seals
Check the door seals around the oven periodically. If the
seals are damaged, please contact your nearest
Authorised After-sales Service Centre. We recommend
that the oven is not used until the seals have been
replaced.
Gas tap maintenance
Over time, the taps may become jammed or difficult to
turn. If this occurs, the tap must be replaced.
!
This procedure must be performed by a qualifiedThis procedure must be performed by a qualified
This procedure must be performed by a qualifiedThis procedure must be performed by a qualified
This procedure must be performed by a qualified
technician who has been authorised by thetechnician who has been authorised by the
technician who has been authorised by thetechnician who has been authorised by the
technician who has been authorised by the
manufacturer.manufacturer.
manufacturer.manufacturer.
manufacturer.
Replacing the oven light bulb
1. After disconnecting the oven
from the electricity mains, remove
the glass lid covering the lamp
socket (
see figure
).
2. Remove the light bulb and
replace it with a similar one:
voltage 230 V, wattage 25 W, cap
E 14.
3. Replace the lid and reconnect the oven to the electricity
supply.
Assistance
Please have the following information handy:
The appliance model (Mod.).
The serial number (S/N).
This information can be found on the data plate located on
the appliance and/or on the packaging.
FORNUIS EN OVEN
Inhoud
Installatie,26-29
Plaatsen en waterpas zetten
Elektrische aansluitingen
Gas aansluitingen
Aanpassen aan de verschillende soorten gas
Technische gegevens
Tabel eigenschappen
Beschrijving van het apparaat, 30
Aanzichttekening
Bedieningspaneel
Starten en gebruik, 31-34
De kookzones
Gebruik van de oven
Kookprogrammas
Timer
Kooktabel oven
Praktische koktips
Voorzorgsmaatregelen en advies, 35
Algemene veiligheid
Afvalverwijdering
Energiebesparing en milieubehoud
Onderhoud en verzorging, 36
De elektrische stroom afsluiten
Reinigen van het apparaat
Vervangen van het ovenlampje
Reinigen van de glaskeramische kookplaat
Servicedienst
Gebruiksaanwijzing
NL
Nederland, 25
NL
Français, 1
FR
English,13
GB
KN3T62SA/NL
KN3T65SA/NL
26
NL
! Bewaar dit instructieboekje zorgvuldig voor
eventuele raadpleging in de toekomst. In het geval u
het apparaat verkoopt, weggeeft of wanneer u
verhuist, moet het boekje bij het apparaat bewaard
worden.
! Lees de instructies aandachtig door: u vindt er
belangrijke informatie betreffende installatie, gebruik
en veiligheid.
! De installatie van het apparaat moet volgens deze
instructies worden uitgevoerd door een bevoegde
installateur.
! Sluit altijd eerst de elektrische stroom af voordat u
tot onderhoud of regeling van het fornuis overgaat.
Ventilatie van de vertrekken
Dit apparaat mag uitsluitend worden geïnstalleerd in
permanent geventileerde ruimten, overeenkomstig
de geldende nationale voorschriften. In het vertrek
waar het apparaat wordt geïnstalleerd moet zoveel
lucht kunnen toestromen als nodig is voor de
normale gasverbranding (de luchtcapaciteit mag niet
minder zijn dan 2 m
3
/h per kW geïnstalleerd
vermogen).
De luchttoevoeropeningen, beschermd door
roosters, moeten voorzien zijn van een leiding met
een minstens 100 cm
2
bruikbare doorsnede en zo
moeten zijn geplaatst dat ze, zelfs niet gedeeltelijk,
worden verstopt, (
zie afbeelding A
).
Deze openingen moeten met 100% worden verbreed
- met een minimum van 200 cm
2
- als het fornuis
niet voorzien is van een thermokoppelbeveiliging en
wanneer de toevoer van lucht op indirecte manier
van aangrenzende vertrekken plaatsvindt (
zie
afbeelding B
) - mits dit geen gemeenschappelijke
ruimtes zijn van het gebouw, vertrekken met een
verhoogd brandgevaar of slaapkamers, die
beschikken over een ventilatieopening die
verbonden is met buiten, zoals zojuist beschreven.
Installatie
A
! Na een langdurig gebruik van het apparaat is het
aan te raden een raam te openen of de draaisnelheid
van eventuele ventilatoren te vermeerderen.
Plaatsen en waterpas zetten
! Het apparaat kan
naast meubels worden
geplaatst die niet hoger
zijn dan het werkvlak.
! Controleer of de wand
die in contact komt met
de achterzijde van het
apparaat van niet
ontvlambaar materiaal
is gemaakt en bestand
is tegen hoge temperaturen (T 90°C).
Voor een correcte installatie:
plaats het apparaat in de keuken, in de eetkamer
of in een eenkamerappartement (niet in de
badkamer);
Afvoer van de verbrandingsgassen
De afvoer van de verbrandingsgassen moet
plaatsvinden door middel van een afzuigkap die is
aangesloten op een veilige en goedwerkende
schoorsteen met natuurlijke trek, ofwel door middel
van een elektrische ventilator die automatisch in
werking treedt elke keer dat u het apparaat aanzet
(
zie afbeeldingen
).
! De vloeibare petroleumgassen, die zwaarder zijn
dan de lucht, blijven laag hangen, daarom moeten
LPG flessen afvoeropeningen naar buiten toe
hebben om een eventuele gaslekkage naar onder
toe af te kunnen voeren.
Lege of halfvolle LPG flessen mogen dus niet
worden geïnstalleerd of bewaard in vertrekken die
lager liggen dan de vloer (kelders, enz.). Het is
beter alleen de in gebruik zijnde fles in het vertrek te
bewaren, ver van warmtebronnen (ovens, open
haard, kachels) die hem tot temperaturen van meer
dan 50°C zouden kunnen brengen.
HOOD
420
Min.
min. 650 mm. with hood
min.
700 mm. without hood
mm.
600
Min. mm.
420
Min. mm.
Afvoer door een
schoorsteen of vertakt
rookkanaal (alleen
bestemd voor
kookapparaten)
Aangrenzend vertrek
Te ventileren vertrek
Ventilatieopening voor
verbrandingslucht
Vergroting van de kier
tussen de deur en de vloer
B
A
Ventilatieopening voor
verbrandingslucht
NL
27
als het kookvlak hoger is dan de meubels, moeten
zij op minstens 200 mm van het apparaat vandaan
worden geplaatst;
als het fornuis onder een keukenkastje wordt
geïnstalleerd, moet de afstand tussen de twee
minstens 420 mm zijn.
Deze afstand moet 700 mm zijn als de keukenkastjes
zijn vervaardigd uit ontvlambaar materiaal (
zie
afbeelding
);
hang geen gordijnen achter het fornuis, of op
minder dan 200 mm van de zijkanten;
eventuele afzuigkappen moeten volgens de
instructies van hun eigen gebruiksaanwijzing
worden geïnstalleerd.
Waterpas zetten
Indien het nodig is het
apparaat te nivelleren, kunnen
de bijgeleverde stelvoetjes in
de daarvoor geschikte
openingen in de hoeken van
het onderstuk van het fornuis
worden geschroefd (
zie
afbeelding
).
De poten* moeten aan het
onderstuk van het fornuis
worden vastgezet.
Elektrische aansluiting
Gebruik voor de voedingskabel een stekker die
genormaliseerd is voor de lading aangegeven op het
typeplaatje(
zie tabel Technische gegevens
).
IWanneer het apparaat rechtstreeks op het
elektrische net wordt aangesloten, moet u tussen het
apparaat en het net een meerpolige schakelaar
aanbrengen met een afstand tussen de contacten van
minstens 3 mm, aangepast aan het elektrische
vermogen en voldoend aan de geldende nationale
normen (de aarding mag niet worden onderbroken
door de schakelaar). De voedingskabel moet zodanig
worden geplaatst dat hij nergens een temperatuur
bereikt van 50°C hoger dan de kamertemperatuur.
Voor de aansluiting moet u controleren dat:
de contactdoos geaard is en voldoet aan de
geldende normen;
het stopcontact in staat is het maximale
vermogen van het apparaat te dragen, zoals
aangegeven op het typeplaatje;
*
Slechts op enkele modellen aanwezig.
de spanning zich bevindt tussen de waarden die
staan aangegeven op het typeplaatje;
de contactdoos en de stekker overeenkomen. Als
dat niet zo is, dient u ofwel de stekker ofwel de
contactdoos te vervangen; gebruik geen
verlengsnoeren of dubbelstekkers.
! Wanneer het apparaat geïnstalleerd is, moeten de
elektrische kabel en de contactdoos gemakkelijk te
bereiken zijn.
! De kabel mag niet gebogen of samengedrukt worden.
! De kabel moet van tijd tot tijd worden gecontroleerd en
mag alleen door erkende monteurs worden vervangen.
! De fabrikant kan niet aansprakelijk worden gesteld
wanneer deze normen niet worden nageleefd.
Gasaansluiting
De aansluiting van het apparaat op de gasleiding of
-fles moet worden uitgevoerd m.b.v. een flexibele
rubberen of stalen buis, in overeenstemming met de
normen UNI-CIG 7129 en 7131 en daaropvolgende
aanpassingen, en uitsluitend na te hebben
gecontroleerd dat het apparaat is afgesteld op het
soort gas waarmee het zal worden gevoed (zie etiket
met de ijking op het deksel: als dit niet het geval is,
zie onder). Bij gebruik van vloeibaar gas uit een
gasfles gebruikt u drukregelaars die voldoen aan de
normen UNI EN 12864 en daaropvolgende
wijzigingen. Om de aansluiting te vergemakkelijken
kan de gasvoeding aan de zijkant worden
geplaatst*: verander de plaats van de slanghouder
voor de aansluiting met de afsluitdop en vervang de
bijgeleverde afdichting.
! Voor het veilig functioneren, een juist gebruik van
de energie en een langere levensduur van het
apparaat moet u zich ervan verzekeren dat de
gasdruk overeenkomt met de waarden die zijn
aangegeven in de Tabel Eigenschappen branders
en sproeiers (
zie onder
).
Aansluiting gas met flexibele rubberen buis
Controleer of de buis overeenkomt met de geldende
nationale normen. De interne diameter van de buis
moet zijn: 8 mm voor voeding met vloeibaar gas.
Zodra de verbinding is uitgevoerd moet u
controleren of de buis:
in geen enkel punt contact maakt met delen die
temperaturen bereiken van meer dan 50°C;
niet onderhevig is aan trekkracht en torsie en dat
er geen bochten of knelpunten zijn;
28
NL
niet in contact komt met scherpe voorwerpen,
scherpe randen, beweegbare onderdelen en niet
in de knel raakt;
gedurende de hele lengte makkelijk te
inspecteren is, zodat u probleemloos kunt
controleren of hij in goede staat verkeert;
korter is dan 1500 mm;
aan beide uiteinden nauw sluit. Hij moet worden
bevestigd met slangklemmen die voldoen aan de
geldende nationale normen.
! Als u aan één of meer van deze voorwaarden niet
kunt voldoen of als het fornuis wordt geïnstalleerd
volgens de voorwaarden van klasse 2 - onderklasse 1
(apparaat gemonteerd tussen twee meubels), dient u
een flexibele, stalen buis gebruiken (
zie onder
).
Aansluiting met een flexibele roestvrije stalen
buis aan een onafgebroken wand voorzien van
aanhechtingen met schroefdraad.
Controleer of de buis en de afdichtingen
overeenkomen met de geldende nationale normen.
Voordat u de buis monteert verwijdert u de
buishouder op het apparaat (het verbindingsstuk
waardoor het gas toegang krijgt tot het fornuis is
voorzien van schroefdraad: 1/2 gas cilindrische
schroefbout).
! Voer de verbinding zodanig uit dat de lengte van
de buis, in uitgestrekte toestand, niet langer is dan
2 meter. Verzeker u ervan dat de buis niet in contact
komt met bewegende delen en dat hij niet wordt
afgekneld.
Controle gasdichtheid
Nadat het installeren heeft plaats gevonden moet de
gasdichtheid van alle verbindingsstukken worden
gecontroleerd met een zeepoplossing en nooit met
een vlam.
Aanpassen aan de verschillende soorten
gas
Het is mogelijk het fornuis aan te passen voor een
verschillende gassoort (anders dan die staat
aangegeven op het typeplaatje op het deksel).
Aanpassen kookplaat
Het vervangen van de sproeiers van de branders
van de kookplaat:
1. verwijder de
pannendragers en haal de
branders van hun plek;
2. draai de sproeiers los met
een pijpsleutel van 7 mm
(
zie afbeelding
) en vervang
ze met de sproeiers die
geschikt zijn voor het nieuwe type gas (
zie Tabel
Eigenschappen branders en sproeiers
);
3. zet de onderdelen in omgekeerde volgorde weer
op hun plaats.
Het regelen van de minimum stand van de branders:
1. zet het kraantje op de minimum stand;
2. haal de knop eraf en draai aan het regelschroefje
in of naast de spil van het kraantje totdat u een
kleine regelmatige vlam krijgt.
! Bij vloeibaar gas moet het regelschroefje geheel
worden vastgeschroefd;
3. controleer of door de kraan snel van maximum
naar minimum te draaien de branders niet uitgaan.
! De branders hebben geen regeling van de primaire
lucht nodig.
! Na de afregeling van een ander soort gas dan het
goedgekeurde gas moet u het oude etiket van de
gasinstelling vervangen met het etiket dat
overeenkomt met het nieuwe gas, verkrijgbaar bij
onze Erkende Technische Servicedienst.
! Als de gasdruk van het gebruikte gas verschillend
(of variabel) is dan hetgeen is voorzien, moet op de
toevoerbuis een drukregelaar worden aangebracht
die voldoet aan de geldende landelijke normen voor
de “drukregelaars voor gekanaliseerd gas”.
NL
29
TECHNISCHE
GEGEVENS
Afmetingen Oven
HxBxD
34x41x39 cm
Inhoud liter 54
Afmetingen van de
verwarmingslade
breedte 42 cm
diepte 44 cm
hoogte 23 cm
Branders
geschikt voor alle soorten gas
aangegeven op het typeplaatje
Spanning en
frequentie van de
elektrische voeding
zie typeplaatje
ENERGY LABEL
Richtlijn 2002/40/EG op etiket
van elektrische ovens. Norm EN
50304
Energieverbruikverklaring Klasse
Natuurlijk convectie -
verwarmingsfunctie:
Statisch.
Energieverbruikverklaring Klasse
convectie Hetelucht -
verwarmingsfunctie:
Gratineren
EU Richtlijnen: 2006/95/EC van
12/12/06
(Laagspanning) en
daaropvolgende wijzigingen -
2004/108/EC van 15/12/04
(Elektromagnetische
Compatibiliteit) en
daaropvolgende wijzigingen -
2009/142/EC van 30/11/09 (Gas)
en daaropvolgende wijzigingen -
93/68/EEC van 22/07/93 en
daaropvolgende wijzigingen -
2002/96/EC.
1275/2008 (Stand-by/ Off mode)
A 15°C en 1013 mbar-droog gas
P.C.S. Natuurlijk gas G25 = 32,49 MJ/m
3
S
S
TC
A
 
 



 

   

    

    


    


    







Kenmerken van de branders en straalpijpen
KN3T62SA/NL
KN3T65SA/NL
30
NL
Beschrijving van het apparaat
Aanzichttekening
Bedieningspaneel
*
Slechts op enkele modellen aanwezig.
Elektronische
timer*
Knoppen
KOOKPLATEN
PROGRAMMAKNOP
THERMOSTAATKNOP
Controlelampje
THERMOSTAAT
Knoppen
KOOKPLATEN
PROGRAMMAKNOP
THERMOSTAATKNOP
Controlelampje
THERMOSTAAT
Knop
TIMER*
gasbrander
ontsteking*
60
NL
31
Starten en gebruik
Gebruik van de kookplaat
Aansteken van de branders
Naast elke BRANDER knop wordt met een vol rondje
aangegeven bij welke brander deze knop hoort.
Om een brander van de kookplaat aan te steken:
1. houd een vlam of aansteker bij de brander;
2. druk en draai tegelijkertijd de BRANDER knop
linksom tot aan het symbool van de grootste vlam E.
3. regel de sterkte van de gewenste vlam, door de
BRANDER knop linksom te draaien: op het minimum
C, op het maximum E of op een tussenliggende
stand.
Voor het aansteken van
de gewenste gasbrander
drukt u de bijhorende
knop geheel in en draait
u hem tegen de klok in
tot aan de maximum E
stand; houd hem
ingedrukt totdat de
brander aan is.
! Mocht de vlam per ongeluk uitgaan, doe dan de
brander uit en wacht minstens 1 minuut voordat u
hem weer probeert aan te steken.
Als het apparaat is voorzien van een
thermokoppelbeveiliging*(C) dient u de BRANDER
knop circa 2-3 seconden ingedrukt te houden om de
vlam aan te houden en de beveiliging te activeren.
Als het apparaat beschikt over een elektronische
ontsteking* (
X
) is het voldoende tegelijkertijd de
BRANDER knop in te drukken en linksom te draaien
tot op het symbool van de grootste vlam, totdat de
ontsteking heeft plaatsgevonden. Het kan zijn dat
de brander uitgaat wanneer u de knop loslaat. In dit
geval moet u de handeling herhalen en de knop iets
langer ingedrukt houden.
Om de brander uit te zetten draait u aan de knop tot
hij op uit staat •.
Praktisch advies voor het gebruik van de
branders
Voor een beter rendement van de branders en een
minimaal gasverbruik dient u pannen te gebruiken
met een platte onderkant, die voorzien zijn van een
deksel en die afgestemd zijn op de afmetingen van
de brander:
! Op modellen die voorzien zijn van een
vlamverspreider moet deze alleen worden gebruikt
op de extra brander wanneer men pannen gebruikt
die een doorsnede hebben van minder dan 12 cm.
Gebruik van de oven
! Wij raden u aan bij het eerste gebruik de oven
minstens een uur leeg te laten functioneren, op
maximum temperatuur en met de deur dicht. Nadat
u de oven heeft uitgeschakeld, opent u de ovendeur
en lucht u het vertrek. De lucht die u ruikt komt door
het verdampen van de middelen die worden
gebruikt om de oven te beschermen.
! Vóór gebruik is het strikt noodzakelijk het plastic
folie aan de zijkanten van het apparaat te
verwijderen.
! Zet nooit voorwerpen op de bodem van de oven; u
riskeert hiermee het email te beschadigen.
1. Selecteer het gewenste kookprogramma door aan
de PROGRAMMAKNOP te draaien.
2. Kies de aangeraden temperatuur voor het
betreffende programma of de door u gewenste
temperatuur door aan de THERMOSTAATKNOP te
draaien.
Een lijst met kooktijden en aanbevolen
kooktemperaturen kunt u terugvinden in de speciale
tabel (
zie Kooktabel oven
).
Tijdens het koken kunt u nog altijd:
het kookprogramma veranderen met behulp van
de PROGRAMMAKNOP;
de temperatuur veranderen met behulp van de
THERMOSTAATKNOP;
het koken onderbreken door de
PROGRAMMAKNOP weer op stand “0” te zetten.
! Plaats de ovenschalen altijd op bijgeleverde
roosters.
Controlelampje THERMOSTAAT
Het oplichten van dit lampje geeft aan dat de oven
aan het verwarmen is. Het licht gaat uit als de
geselecteerde temperatuur is bereikt. Vanaf dit
moment gaat het controlelampje aan en uit, hetgeen
aangeeft dat de thermostaat werkt en de
temperatuur in de oven constant houdt.
*
Slechts op enkele modellen aanwezig.
randers iaeteran ()
Snell(groot)(R) 2426
Drievoudigering(TC ) 2426
Halfsnel(S) 16 20
Sp aarbrande r(A) 1014
X
C
Om het type brander te selecteren kunt u de
tekeningen raadplegen die staan weergegeven in
het hoofdstuk “Eigenschappen branders en
sproeiers”.
32
NL
Ovenverlichting
De verlichting gaat aan door de
PROGRAMMAKNOP in een willekeurige stand
(behalve “0”) te zetten. Hij zal aanblijven totdat de
oven werkt. Door met de knop
te selecteren gaat
het licht aan zonder dat de verwarming wordt
ingeschakeld.
! Wij raden u aan bij het eerste gebruik de oven
minstens een uur leeg te laten functioneren, op
maximum temperatuur en met de deur dicht. Nadat
u de oven hebt uitgedaan, opent u de ovendeur en
lucht u het vertrek. De lucht die u ruikt komt door het
verdampen van de middelen die worden gebruikt
om de oven te beschermen.
Kookprogramma’s
! U kunt voor alle programma’s een temperatuur
tussen de 60°C en MAX instellen, behalve:
GRILL (hierbij is het aanbevolen alleen MAX te
gebruiken);
GRATINEREN (hierbij is het aanbevolen niet meer
dan 200°C in te stellen).
Programma TRADITIONELE OVEN
De onderste en bovenste verwarmingselementen
gaan aan. Met deze traditionele kookwijze is het
beter een enkel rooster te gebruiken: met meerdere
roosters riskeert u een slechte
temperatuursverspreiding.
Programma MULTIOVEN
Alle verwarmingselementen gaan aan (onder en
boven) en de ventilator gaat draaien. Aangezien de
warmte in de hele oven constant is, zorgt de lucht
dat de gerechten op gelijkmatige wijze gekookt en
gebakken worden. Hierbij is het mogelijk maximaal
twee roosters tegelijk te gebruiken.
Programma OVEN BOVEN
Het bovenste verwarmingselement gaat aan. Deze
functie kan worden gebruikt voor het afmaken van
een gerecht.
Programma GRILL
Het bovenste verwarmingselement gaat aan. De
hoge en rechtstreekse hitte bruint de oppervlakten
van het vlees onmiddellijk zodat er geen vocht
verloren gaat en de binnenkant mals blijft. Het koken
onder de grill is vooral aan te raden voor gerechten
die een hoge temperatuur aan de buitenkant nodig
hebben: kalfs- en runderbiefstuk, entrecôte, filet,
hamburger etc...
U vindt enkele voorbeelden in het
hoofdstuk “Praktische kooktips”. Kook met de
ovendeur dicht.
Programma GRATINEREN
Het bovenste verwarmingselement gaat aan en de
ventilator gaat draaien. Hiermee wordt de
rechtstreekse bovenhitte van de grill gecombineerd
met de circulatie van de lucht in de oven. Eventueel
verbranden van de buitenkant wordt zo vermeden;
de warmte dringt gemakkelijker door naar de
binnenkant. Kook met de ovendeur dicht.
Programma GEBAK OVEN
Het achterste verwarmingselement gaat aan en de
ventilator gaat werken zodat een gelijkmatige, zachte
warmte wordt gecreëerd. Deze functie is aanbevolen
voor het bakken van kwetsbare gerechten (vooral
taarten die moeten rijzen) en kleine gerechten die u
op 3 hoogtes tegelijkertijd wilt koken.
Praktische kooktips
! Gebruik voor het koken met de heteluchtoven nooit
de standen 1 en 5: de hete lucht zou fijne gerechten
kunnen verbranden.
! Bij de functies GRILL of GRATINEREN raden wij u
aan de lekplaat op stand 1 te zetten om eventueel
vet of jus op te vangen.
MULTIKOKEN
Gebruik de standen 2 en 4, en plaats de gerechten
die meer warmte nodig hebben op stand 2.
Plaats de lekplaat op de onderste stand en de grill
op de hoogste.
GRILL
Plaats de grill op stand 3 of 4, plaats de gerechten
op het midden van de grill.
We raden u aan het energieniveau op de hoogste
stand te zetten. Het is normaal dat het bovenste
verwarmingselement niet constant aan blijft: zijn
werking wordt geregeld door een thermostaat.
NL
33
PIZZA
Voor een optimale pizza dient u het programma
MULTIKOKEN te gebruiken.
Gebruik een lichte aluminium ovenschaal en zet
hem op het bijgeleverde ovenrooster.
Bij gebruik van de bakplaat duurt het langer en
krijgt u waarschijnlijk geen krokante pizza.
Bij zeer gevulde pizza’s raden wij aan de
mozzarella of andere kaas pas halverwege de
kooktijd toe te voegen.
De elektronische timer*
Hierop ziet u de juiste tijd en de functie van de
terugtelelnde timer.
N.B.: alle functies beginnen te werken na ongeveer 7
seconden vanaf het instellen.
Het gelijk zetten van de klok
Na het aansluiten aan het net of na uitvallen van de
stroom knippert op de display 0 00
Druk op de knop
en zet vervolgens met de
knoppen
ss
ss
s
en
tt
tt
t
de klok gelijk. Voor snel
vooruitzetten houdt u de knoppen ingedrukt.
Op dezelfde wijze kunt u eventuele verdere gelijkzetti
gen uitvoeren.
Timer
Druk op de knop
nn
nn
n
en u ziet op de display het symbool
nn
nn
n
”. Bij iedere druk op de knop
tt
tt
t
gaat de tijd met 10
seconden vooruit tot aan 99 minuten en 50 seconden.
Als u doorgaat met indrukken springt de tijd met een
minuut vooruit tot aan een maximum van 10 uren.
Met de knop
ss
ss
s
gaat u terug.
Als de gewenste tijd is ingesteld begint het aftellen.
Als de tijd op is hoort u een geluidssignaal dat kan
worden stop gezet door op een willekeurige knop te
drukken. U kunt de tijd zien door op de knop
te
drukken, en het symbool “
nn
nn
n
” beduidt dat de timer-functie
is ingesteld. Na ongeveer 7 minuten ziet u automatisch
weer de timer.
Het annuleren van een reeds ingestelde tijd
Druk op de knop
ss
ss
s
tot aan 0 00.
Het regelen van de sterkte van het geluidssignaal
Nadat u de instellingen van de klok heeft gekozen en
bevestigd, kunt u de sterkte van het geluidssignaal
regelen met de toets
ss
ss
s
.
Gebruik de timer Einde Kooktijd*
1. U moet allereerst het geluidssignaal opwinden
door de knop TIMER EINDE KOOKTIJD bijna
helemaal met de klok mee te draaien.
2. Draai de knop weer tegen de klok in en stel de
gekozen tijd in. Zorg ervoor dat de minuten die zijn
aangegeven op de knop TIMER EINDE KOOKTIJD
samenvallen met de vaste aanwijzer op het
bedieningspaneel.
3. Als de tijd verstreken is hoort u een geluidssignaal
en gaat de oven uit.
4. Als de oven uit is kan de timer als gewone
kookwekker worden gebruikt.
! Als u de oven handmatig wilt gebruiken, en dus de
timer voor het einde van de kooktijd wilt
uitschakelen, moet de knop TIMER EINDE
KOOKTIJD tot aan het symbool 9 worden gedraaid.
*
Slechts op enkele modellen aanwezig.
BELANGRIJK! De glazen afdekplaat
kan breken bij oververhitting. Doe
alle branders of eventuele elektri-
sche kookplaten uit voordat u hem
dicht doet.*Betreft alleen model-
len met glazen deksel
34
NL
Kooktabel oven
Programma's Gerechten
Gewicht
(kg)
Roosterstanden
Voorverwarming
(minuten)
Aangeraden
temperatuur
Kooktijd
(minuten)
Traditionele
oven
Eend
Braadstuk
Varkensrollade
Koekjes (kruimeldeeg)
Taarten
1
1
1
-
1
3
3
3
3
3
15
15
15
15
15
200
200
200
180
180
65-75
70-75
70-80
15-20
30-35
Multikoken
Pizza (op 2 roosters)
Lasagne
Lamsvlees
Kip + gebakken aardappels
Makreel
Plum-cake
Soesjes (op 2 roosters)
Koekjes (op 2 roosters)
Cake (op 1 rooster)
Cake (op 2 roosters)
Quiche
1
1
1
1+1
1
1
0.5
0.5
0.5
1
1.5
2 en 4
3
2
2 en 4
2
2
2 en 4
2 en 4
2
2 en 4
3
15
10
10
15
10
10
10
10
10
10
15
230
180
180
200
180
170
190
180
170
170
200
15-20
30-35
40-45
60-70
30-35
40-50
20-25
10-15
15-20
20-25
25-30
Oven Boven
Tong en inktvis
Calamari- en garnalenspiesjes
Kabeljauwfilet
Gegrilde groenten
1
1
1
1
4
4
4
3 of 4
5
5
5
5
Max
Max
Max
Max
8-10
6-8
10
10-15
Grill
Kalfsbiefstuk
Koteletten
Hamburgers
Makreel
Toast
1
1
1
1
n.° 4
4
4
4
4
4
5
5
5
5
5
Max
Max
Max
Max
Max
15-20
15-20
7-10
15-20
2-3
Gratineren
Gegrilde kip
Inktvis
1.5
1.5
2
2
5
5
200
200
55-60
30-35
Oven
Gebak
Taarten
Vruchtentaart
Plum-cake
Cake
Gevulde flensjes (op 2 roosters)
Kleine cakejes (op 2 roosters)
Kaaskoekjes (op 2 roosters)
Soesjes (op 3 roosters)
Koekjes (op 3 roosters)
Schuimgebak (op 3 roosters)
0.5
1
0.7
0.5
1.2
0.6
0.4
0.7
0.7
0.5
3
2 of 3
3
3
2 en 4
2 en 4
2 en 4
1 en 3 en 5
1 en 3 en 5
1 en 3 en 5
15
15
15
15
15
15
15
15
15
15
180
180
180
160
200
190
210
180
180
90
20-30
40-45
40-50
25-30
30-35
20-25
15-20
20-25
20-25
180
NL
35
Voorzorgsmaatregelen
en advies
! Dit apparaat is ontworpen en vervaardigd volgens
de geldende internationale veiligheidsvoorschriften.
Deze aanwijzingen zijn geschreven voor uw veiligheid
en u dient ze derhalve goed door te nemen.
Algemene veiligheid
Dit apparaat is vervaardigd voor niet-
professioneel gebruik binnenshuis.
Het apparaat dient niet buitenshuis te worden
geplaatst, ook niet in overdekte toestand. Het is
erg gevaarlijk als het in aanraking komt met regen
of onweer.
Raak het apparaat niet aan als u blootsvoets bent
of met natte of vochtige handen of voeten.
Het apparaat dient om gerechten te koken. Het
mag uitsluitend door volwassenen worden
gebruikt en alleen volgens de instructies die
beschreven staan in deze handleiding.
Deze handleiding betreft een apparaat van klasse
1 (losstaand) of klasse 2 - subklasse 1
(ingebouwd tussen 2 meubels).
Tijdens het gebruik van de oven worden de
verwarmingselementen en enkele delen van de
ovendeur zeer heet. Raak ze niet aan en houd
kinderen op een afstand.
laat de apparatuur niet door kinderen of
gehandicapte personen gebruiken zonder toezicht
Voorkom dat elektrische snoeren van andere
kleine keukenapparaten op warme delen van het
apparaat terechtkomen.
Laat de ventilatieopeningen en warmteafvoer vrij.
Gebruik altijd ovenwanten om gerechten in de
oven te zetten en eruit te halen.
Gebruik geen ontvlambare vloeistoffen (alcohol,
benzine enz.) in de buurt van het apparaat als het
in gebruik is.
Plaats geen brandbaar materiaal in de onderste
opberglade of in de oven: als de oven plotseling
aan zou worden gezet, zou dit materiaal vlam
kunnen vatten.
De interne oppervlakken van de lade (indien
aanwezig) kunnen warm worden.
Controleer altijd dat de knoppen in de stand
staan als het apparaat niet gebruikt wordt.
Trek nooit de stekker aan het snoer uit het
stopcontact, maar pak altijd de stekker direct
beet.
Maak het apparaat niet schoon of voer geen
onderhoud uit als de stekker nog in het
stopcontact zit.
Probeer in geval van storingen nooit zelf de
interne mechanismen van het apparaat te
repareren. Neem contact op met de Technische
Dienst.
Plaats geen zware voorwerpen op de open
ovendeur.
Dit apparaat mag niet worden gebruikt door
personen (kinderen inbegrepen) met een beperkt
lichamelijk, sensorieel of geestelijk vermogen of
personen die niet de nodige ervaring of kennis
hebben met het apparaat, tenzij onder toezicht
van een persoon die verantwoordelijk is voor hun
veiligheid of nadat hun is uitgelegd hoe het
apparaat werkt.
Verwijder eventuele vloeistoffen die zich op de
dekplaat bevinden voordat u hem open doet.
Voorkom dat kinderen met het apparaat spelen.
Afvalverwijdering
Het verwijderen van het verpakkingsmateriaal:
houdt u aan de plaatselijke normen zodat het
materiaal hergebruikt kan worden.
De Europese richtlijn 2002/96/EG, betreffende
afgedankte elektrische en elektronische
apparatuur (AEEA), voorziet dat huishoudelijke
apparatuur niet met het normale afval mag worden
meegegeven. De verwijderde apparaten moeten
apart worden opgehaald om het terugwinnen en
recyclen van de materialen waaruit ze bestaan te
optimaliseren en te voorkomen dat er eventuele
schade voortvloeit voor de gezondheid en het
milieu. Het symbool van de afvalemmer met een
kruis staat op alle producten om de consument
eraan te herinneren dat dit gescheiden afval is.
Om meer informatie te verkrijgen betreffende een
juiste verwijdering van huishoudapparaten kan de
consument zich richten tot de gemeentelijke
reinigingsdienst of de verkopers.
Energiebesparing en milieubehoud
Door de oven te gebruiken vanaf het late
middaguur tot aan de vroege ochtend zorgt u
ervoor dat uw elektriciteitscentrale minder wordt
belast tijdens het ‘spitsuur’.
Houd bij de functies GRILL altijd de ovendeur
dicht: u bereikt betere kookresultaten en een
aanzienlijke energiebesparing (circa 10%).
Houd de afdichtingen altijd schoon zodat ze goed
aansluiten op de deur en er geen hitte vrij kan
komen.
36
NL
Onderhoud en verzorging
De elektrische stroom afsluiten
Sluit altijd eerst de stroom af voordat u tot enige
handeling overgaat.
Reinigen van het apparaat
! Gebruik nooit stoom- of hogedrukreinigers voor het
reinigen van het apparaat.
De buitenkant, dus zowel het email en het roestvrij
staal als de rubberen afdichtingen, kunnen met
een spons en een sopje worden afgenomen. Als
de vlekken moeilijk te verwijderen zijn, kunt u een
speciaal reinigingsmiddel gebruiken. Spoel en
droog het na het schoonmaken goed af. Gebruik
geen schuurmiddelen of bijtende producten.
De pannendragers, de branderdeksels, de
vlamkronen en de branders van de kookplaat
kunnen worden verwijderd voor een
gemakkelijkere reiniging; was ze in warm water en
een niet schurend reinigingsmiddel. Zorg ervoor
de afzettingen te verwijderen en doe ze pas op
hun plaats als ze volledig droog zijn.
Reinig geregeld het uiteinde van de
thermokoppelbeveiliging*.
De binnenkant van de oven kunt u het beste
direct na gebruik schoonmaken, als hij nog lauw
is. Gebruik warm water en een
schoonmaakmiddel, spoel vervolgens af en droog
met een zachte doek. Gebruik geen
schuurmiddelen.
Reinig het glas van de deur met een spons en
niet schurende producten. Droog met een zachte
doek. Gebruik geen ruwe schurende materialen of
scherpe schrapertjes die het oppervlak zouden
kunnen krassen waardoor als gevolg het glas zou
kunnen barsten.
De accessoires kunnen gewoon worden
afgewassen (eventueel ook in de vaatwasser).
Sluit het deksel van de kookplaat nooit zolang de
gasbranders nog aan of warm zijn. Verwijder
eventuele vloeistoffen die zich op de dekplaat
bevinden voordat u hem open doet.
Het controleren van de afdichtingen van de oven
Controleer regelmatig de staat van de afdichtingen
rondom de ovendeur. In het geval de afdichting
beschadigd is, dient u zich tot de dichtstbijzijnde
Erkende Servicedienst te wenden. Gebruik de oven
niet voordat de reparatie is uitgevoerd.
Vervangen van het ovenlampje
1. Nadat u de oven heeft losgekoppeld van het
elektrische net, verwijdert u
het glazen deksel van de
lamphouder (
zie afbeelding
).
2. Schroef het lampje los en
vervang het met eenzelfde
soort lampje: spanning 230 V,
vermogen 25 W, fitting E 14.
3. Doe het deksel weer op zijn
plaats en verbind de oven weer aan het elektrische
net.
Onderhoud gaskranen
Met verloop van tijd kan een kraan stroef worden of
vast blijven zitten; in dat geval is het noodzakelijk
hem te vervangen.
!
Dit moet worden uitgevoerd door een door deDit moet worden uitgevoerd door een door de
Dit moet worden uitgevoerd door een door deDit moet worden uitgevoerd door een door de
Dit moet worden uitgevoerd door een door de
fabrikant bevoegde installateur.fabrikant bevoegde installateur.
fabrikant bevoegde installateur.fabrikant bevoegde installateur.
fabrikant bevoegde installateur.
Servicedienst
! Wendt u nooit tot niet erkende monteurs.
Dit dient u door te geven:
Het soort storing;
Het model apparaat (Mod.)
Het serienummer (S/N)
Deze informatie bevindt zich op het typeplaatje op
het apparaat.
Verwijderen van de dekplaat
De dekplaat van het fornuis kan
verwijderd worden om het reinigen te
vergemakkelijken. Open hem
helemaal en trek hem naar boven (zie
afbeelding).
XEROX FABRIANO
03/2011 - 195087483,00
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Indesit KN3T65SA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Indesit KN3T65SA in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info