30
Audio Inputs: Assign an audio input to a specific video/computer source
input. (Default settings are as follows: Audio 1 is used with VGA 1 and
VGA 2; Audio 2 is used with S-video and composite.)
Press up or down to highlight the source you want to change, then press
select or the left and right arrow keys to change that source’s audio input.
Press menu when done changing audio inputs.
Auto Source: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this fea-
ture is Off, the projector defaults to the source selected in Power-up Source.
To display another source, you must manually select one by pressing the
Source button on the remote or keypad.
Fast Color Refresh: Controls color wheel speed.
Power-up Source: Determines which source the projector checks first for
active video during power-up.
VGA 1 SCART: If a SCART source is connected to VGA 1 (using an adapter),
use this feature to select the SCART type.
VGA 2 SCART: If a SCART source is connected to VGA 2 (using an adapter),
use this feature to select the SCART type.
Video Standard: When this feature is set to Auto, the projector attempts to
automatically pick the video standard based on the input signal it receives.
(The video standard options may vary depending on your region of the
world.) If the projector is unable to detect the correct standard, the colors
may not look right or the image may appear “torn.” If this happens, manu
-
ally select a video standard by selecting NTSC, PAL, or SECAM from the
Video Standard menu.
Closed Captions: Controls closed caption display while audio is not muted. If
this setting is not off, and audio is not muted, and the source is NTSC and
contains captions on the selected channel, then the projector must display
caption text overlaid on the image.
Ceiling Mount: Turns the image upside down for ceiling-mounted projection.
Rear Project: Reverses the image so you can project from behind a
translucent screen.
Auto Keystone: Enables and disables the projector’s automatic vertical
keystone adjustment.
Prevent PC Screen Saver: Prevents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Search Screen: Allows you to display a blank screen instead of the default
screen at startup, and when no source is detected.
Take Snapshot...: Captures the current image and allows it to be used as the
search screen image.
Disable Snapshot: Allows the user to disable the snapshot capability.
Show Messages: Displays status messages (such as “Searching”) in the lower-
left corner of the screen.
Menu Offset: Allows you to change the position of the On Screen Display
items.
Menu Transparency: Allows you to change how much of the projected image
behind the menu you can see. As the value increases, more of the image
behind the menu is visible.
Magnify Controls: Allows you to change the function of the arrow buttons
when the menu is not shown. By default, the arrow buttons allow you to
advance slides while in PowerPoint’s SlideShow mode. To make the arrow
buttons also adjust magnify settings, choose Magnify Controls to turn
magnify controls on. Now when the menu is not shown, you can press the
Select button to switch between the magnification settings (Magnify Level,
Magnify Horizontal Position and Magnify Vertical Position), then press
Select again to turn off magnify controls and use the arrow buttons to
advance slides.
Keypad Enable: Enables or disables keypad.
Glow Ring: Controls the brightness level of the glow ring status indicator.
