537535

InFocus IN8601 Handleiding

51
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright 2012
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM
is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint,
and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are
trademarks or registered trademarks of Adobe Systems Incorporated. DLP®, DLP Link and the DLP logo
are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments.
InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus
Corporation in the United States and other countries.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
— i —
SP8600HD3D/IN8601 User’s Manual
— ii —
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause per-
sonal injury.
Throughout this manual, component parts and items in the On-Screen Display (OSD) menus are denoted
in bold font as in this example: “Push the MENU button on the remote control to open the DISPLAY
menu.”
General Safety Information
¾ Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact InFocus at www.infocus.com/support
¾ Follow all warnings and cautions in this manual and on the unit case.
¾ The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
¾ Do not place the unit on an unstable surface, cart, or stand.
¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾ Do not place heavy objects such as books or bags on the unit.
Preface
Projector Installation Notice
¾ Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be in-
stalled in any way other than the desktop and ceiling mount, otherwise lamp life could decrease
dramatically, and may lead to other unpredictable damages.
¾ Allow at least 50 cm (19.69 inch) clearance around the exhaust vent.
(19.69 inch) (19.69 inch)
(19.69 inch)
(3.94 inch)
(11.81 inch)
(19.69 inch)
¾ Ensure that the intake vents do not recycle hot air from the exhaust vent.
¾ When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed operation temperature while the projector is running, and the
air intake and exhaust vents are unobstructed.
¾ All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable operation temperature range.
– iii –
SP8600HD3D/IN8601 User’s Manual
Power Safety
¾ Only use the supplied power cord.
¾ Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
¾ Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 28
for clear and safe instructions for this procedure. Before replacing the lamp:
¾ Unplug the power cord.
¾ Allow the lamp to cool for about one hour.
Cleaning the Projector
¾ Unplug the power cord before cleaning. See Cleaning the Projector on page 31.
¾ Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section
on page 43.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at www.eiae.org
. For lamp specific
disposal information check
www.lamperecycle.org.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
GS Mark
Associated address:
INFOCUS INTERNATIONAL B.V.
CASABLANCAWEG 14 BLD A4 1047 HP
AMSTERDAM NL
About this Manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wher-
ever possible, relevant information—such as an illustration and its description—has been kept on one
page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting
the environment. It is suggested that you only print sections that are relevant to your needs.
— iv —
Preface
– v –
Table of Contents
GETTING STARTED........................................................................................................................................................... 1
PACKING CHECKLIST ........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................ 2
Top view—On-screen Display (OSD) buttons and LEDs.......................................................................................3
Rear view....................................................................................................................................................................... 4
Bottom view................................................................................................................................................................... 5
REMOTE CONTROL PARTS ................................................................................................................................................... 6
SETUP AND OPERATION................................................................................................................................................. 8
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................... 8
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................... 9
ADJUSTING THE PROJECTOR LEVEL................................................................................................................................... 10
ADJUSTING THE ZOOM RING, FOCUS AND KEYSTONE........................................................................................................ 11
ADJUSTING THE VOLUME .................................................................................................................................................. 12
ON-SCREEN DISPLAY (OSD) MENU SETTINGS...................................................................................................... 13
OSD MENU CONTROLS ..................................................................................................................................................... 13
Navigating the OSD ................................................................................................................................................... 13
SETTING THE OSD LANGUAGE .......................................................................................................................................... 14
OSD MENU OVERVIEW ..................................................................................................................................................... 15
PICTURE>>BASIC MENU................................................................................................................................................. 16
PICTURE>>ADVANCED MENU ........................................................................................................................................ 17
HSG Adjustment......................................................................................................................................................... 18
DISPLAY MENU............................................................................................................................................................... 19
PC Detail Adjustment................................................................................................................................................. 20
3D Settings.................................................................................................................................................................. 21
SETUP>>BASIC MENU..................................................................................................................................................... 22
Menu Settings............................................................................................................................................................. 23
Source.......................................................................................................................................................................... 23
SETUP>>ADVANCED MENU ............................................................................................................................................ 24
Audio............................................................................................................................................................................25
Lamp ............................................................................................................................................................................ 25
Closed Caption........................................................................................................................................................... 26
Presentation Timer..................................................................................................................................................... 26
STATUS MENU ................................................................................................................................................................ 27
MAINTENANCE AND SECURITY.................................................................................................................................. 28
REPLACING THE PROJECTION LAMP................................................................................................................................... 28
CLEANING THE PROJECTOR................................................................................................................................................ 31
Cleaning the Lens ...................................................................................................................................................... 31
Cleaning the Case...................................................................................................................................................... 31
TROUBLESHOOTING...................................................................................................................................................... 32
COMMON PROBLEMS AND SOLUTIONS............................................................................................................................... 32
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 32
LED ERROR MESSAGES..................................................................................................................................................... 33
IMAGE PROBLEMS.............................................................................................................................................................. 33
LAMP PROBLEMS............................................................................................................................................................... 34
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 34
AUDIO PROBLEMS ............................................................................................................................................................. 35
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 35
HDMI Q & A .................................................................................................................................................................... 36
SPECIFICATIONS............................................................................................................................................................. 37
SPECIFICATIONS................................................................................................................................................................. 37
PROJECTION DISTANCE VS. PROJECTION SIZE.................................................................................................................... 38
Projection Distance and Size Table......................................................................................................................... 38
SP8600HD3D/IN8601 User’s Manual
— vi —
TIMING MODE TABLE........................................................................................................................................................ 39
PROJECTOR DIMENSIONS ...................................................................................................................................................42
REGULATORY COMPLIANCE....................................................................................................................................... 43
FCC WARNING.................................................................................................................................................................. 43
CANADA ............................................................................................................................................................................ 43
WEEE ............................................................................................................................................................................... 43
SAFETY CERTIFICATIONS................................................................................................................................................... 43
RS-232C PROTOCOL.......................................................................................................................................................... 44
Preface
– 1 –
GETTING STARTED
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR
R
EMOTE CONTROL
(
BATTERIES NOT INCLUDED
)
CD-ROM
(T
HIS USER’S MANUAL)
VGA
CABLE
P
OWER CORD
(
VARIES PER COUNTRY)
S
AFETY & WARRANTY BOOKLET QUICK START GUIDE
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Caution:
Avoid using the projector in dusty environments.
SP8600HD3D/IN8601 User’s Manual
Views of Projector Parts
Front-right View
1
34 5 6 72
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Elevator button Push to release elevator foot
2.
Elevator foot Adjusts level of projector
10
3.
Lens Projection Lens
4.
IR receiver Receives the remote control IR signal
6
5.
Focus ring Focuses the projected image
6.
Zoom ring Enlarges the projected image
11
7.
Function keys
See Top view—On-screen Display (OSD) but-
tons and LEDs.
3
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
— 2 —
Preface
Top view—On-screen Display (OSD) buttons and LEDs
Source
Menu
Enter
Re-sync
11
10
12
1
2
4
5
6
3
7
8
9
ITEM LABEL DESCRIPTION SEE PAGE:
Solid
Green
Power On / Standby
1.
Power LED
Off Power Off (AC Off)
Solid Red The lamp is powered on.
2.
Lamp LED
Flashing
Red
The lamp is warming up or cooling down.
(see LED Error Messages on page 33)
3.
Temp LED Solid Red
Error code (see LED Error Messages on page 33)
4.
(Power button)
Turn the projector On or Off.
9
5.
▲ (Up cursor) /
Keystone
Navigate the OSD
Quick Menu – For Keystone
6.
Menu Open and exit OSD menus
7.
► (Right cursor) /
Vol+
Navigate and change settings in the OSD
Quick Menu – For Volume
13
8.
Re-sync Optimize image size, position, and resolution
9.
▼ (Down cursor) /
Keystone
Navigate the OSD
Quick Menu – For Keystone
10.
Enter Enter or confirm highlighted OSD menu item
11.
◄ (Left cursor) /
Vol-
Navigate and change settings in the OSD
Quick Menu – For Volume
13
12.
Source Navigate and select sources.
4
– 3 –
SP8600HD3D/IN8601 User’s Manual
Rear view
12
3
4
56
7
8
91011121314
ITEM LABEL DESCRIPTION SEE PAGE:
1.
AC IN Connect the POWER CABLE.
9
2.
COMPONENT Connect the COMPONENT CABLE from a display.
3.
COMPOSITE Connect the COMPOSITE CABLE from a video device.
4.
VGA Connect the RGB CABLE from a computer.
5.
HDMI – 1 Connect the HDMI CABLE from an HDMI device.
6.
HDMI – 2 Connect the HDMI CABLE from an HDMI device.
7.
DC 12V TRIGGER Connect a 12V screen trigger (200ma max).
8.
Security Lock
Secure to permanent object with a security lock system.
9.
Speaker
Outputs the projector audio.
10.
IR receiver Receives the remote control IR signal.
6
11.
AUDIO IN (L and R) Connect the AUDIO CABLE from an input device.
12.
AUDIO IN Connect an AUDIO CABLE from an input device.
13.
RS-232C Connect RS-232 serial port cable for command control.
14.
AUDIO OUT Connect an AUDIO CABLE to external speaker system.
Note:
If your video equipment has various input sources, it is recommended to connect in priority of
HDMI, component, S-Video, Composite for better picture quality.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
— 4 —
Preface
Bottom view
51.5
65.071.0
90.5
109.0 76.0
12 234
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Leveling foot Rotate leveling foot to adjust angle position.
10
2.
Ceiling support holes
Only use with an InFocus ceiling mount system (p/n PRJ-MNT-UNIV).
See your InFocus dealer or go to www.infocusstore.com
.
3.
Elevator foot
Elevator foot drops down when elevator button is
pushed.
4.
Elevator button Push to release elevator foot.
10
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 12 mm (0.47inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment over a period of 60 seconds.
– 5 –
SP8600HD3D/IN8601 User’s Manual
Remote Control Parts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
5
16
17
18
19
20
21
22
23
24
2
5
26
27
28
29
30
31
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo-
rescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path be-
tween the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
— 6 —
Preface
– 7 –
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Power ON Turn the projector on.
9
2.
LED indicator Only lights when the remote keys are pressed.
3.
Display Mode Choose a suitable preset mode for usage environment.
4.
Contrast Display the Contrast setting bar and use the right and left keys to adjust.
5.
Brightness
Display the Brightness setting bar and use the right and left keys to ad-
just.
6.
Left cursor
When the OSD is displayed, this button navigates to the
left.
13
7.
Menu Display the OSD menu.
8.
Auto image Re-synchronize the PC image.
9.
Overscan Adjust overscan.
10.
SHARP
Display the Sharpness setting bar and use the right and left keys to ad-
just the image sharpness levels (video sources only).
11.
Source-1 HDMI1
12.
Source-4 Component
13.
Power OFF Turn the projector off.
9
14.
Source Navigate and select sources..
15.
Info Display projector information.
16.
Mute Mute the audio.
17.
Up cursor /
Keystone+
When the OSD is displayed, this button navigates up the
menu. Otherwise it adjusts keystone.
18.
Select Enter and confirm settings in the OSD.
19.
Right cursor
When the OSD is displayed, this button navigates to the
right.
20.
Down cursor /
Keystone -
When the OSD is displayed, this button navigates down
the menu. Otherwise it adjusts keystone.
13
21.
Resize Change the image aspect ratio.
22.
Blank Blank the screen.
23.
Volume+ Increase the volume.
24.
Freeze Freeze video.
25.
Volume- Decrease the volume.
26.
TINT
Display the Tint setting bar and use the right and left keys to adjust the
image tint levels (video sources only).
27.
2Dto3D Turn On/Off 2D to 3D function (HDMI1 and HDMI2 only).
28.
Source-3 VGA
29.
Source-2 HDMI2
30.
Light Turn the remote control backlight on or off.
31.
Source-5 Video
SP8600HD3D/IN8601 User’s Manual
— 8 —
SETUP AND OPERATION
Inserting the Remote Control Batteries
1.
Remove the battery compartment
cover by sliding the cover in the di-
rection of the arrow.
2.
Insert the batteries (not included) as
shown in the illustration.
3.
Replace the cover.
Caution:
1. Only use AA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
Preface
Starting and Shutting down the Projector
1.
Connect the power cord to the pro-
jector. Connect the other end to a
wall outlet.
The
POWER LED will be on.
2.
Turn on the connected devices.
3. Ensure the POWER LED dis-
plays a solid green. Then press the
Power ON button on the projector
keypad or remote (
).
The projector splash screen displays
and connected devices are de-
tected.
If more than one input device is connected, press the SOURCE button and use ▲▼ to
scroll among devices.
4.
• VGA : Analog RGB
• HDMI 1/2: High Definition Multimedia Interface compatible
•
COMPONENT: DVD input YCbCr/ YPbPr, or HDTV input YPbPr
•
Video: Traditional composite video
5.
To turn the projector off, press the
Power OFF button (
). on the
projector keypad or remote.
When
the POWER OFF window appears,
press the Power OFF button ( )
again.
The projector turns off.
Caution:
Do not unplug the power cord until the LAMP LED stops flashing–indicating the projector has
cooled down.
– 9 –
SP8600HD3D/IN8601 User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Remove and discard the foam spacer on the rear leveling foot before adjusting the projec-
tion angle.
• Ensure the cables are in a safe location. You could trip over them.
C
B
A
D
1.
To raise the level of the projector, lift the projector [A] and press the elevator
button [B].
The elevator foot drops down [C].
2.
To lower the level of the projector, press the elevator button and push down
on the top of the projector.
3.
To adjust the angle of the picture, turn the leveling foot [D] right or left until
the desired angle has been achieved.
— 10 —
Preface
Adjusting the Zoom ring, Focus and Keystone
1.
Use the Zoom control
(on the projector only)
to resize the projected
image and screen size
B
.
2.
Use the Focus control
(on the projector only)
to sharpen the pro-
jected image
A
.
3.
Use the KEYSTONE
buttons (on the projec-
tor or the remote
control) to correct im-
age trapezoiding (wider
top or bottom).
Remote control and OSD panel
4.
The keystone control
appears on the display.
– 11 –
SP8600HD3D/IN8601 User’s Manual
Adjusting the Volume
1.
Press the Volume but-
tons (on the projector or
the remote control).
The volume control
appears on the display.
2.
Use the Vol +/- buttons
(on the projector or the
remote control).
3.
Press the MUTE button
to turn off the audio
(This feature is avail-
able only on the
remote).
— 12 —
Preface
– 13 –
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to navigate and make changes
to the OSD.
1. To enter the OSD, press the MENU
button.
2. There are six menus. Press the cur-
sor ◄► button to move through the
menus.
3. Press the cursor ▲▼ button to
move up and down in a menu.
4. Press ◄► to change values for set-
tings.
5. Press MENU to close the OSD or
leave a sub menu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the PC Detail
Adjustment item in the PICTURE>>Basic menu can only be modified when connected to a PC.
Items that are not available cannot be accessed and are grayed out.
SP8600HD3D/IN8601 User’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the MENU button. Press the cursor ◄► button to navigate to SETUP>>Basic.
2. Press the cursor ▲▼ button until Language is highlighted.
3. Press the cursor ◄► button until the language you want is selected.
4. Press the MENU button to close the OSD.
— 14 —
Preface
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
– 15 –
SP8600HD3D/IN8601 User’s Manual
PICTURE>>Basic Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Basic menu. Press ◄► to change values for settings.
Note:
Customizing the settings in PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode.
ITEM DESCRIPTION
Display Mode
Press the cursor ◄► buttons to set the Display Mode.
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3)
User Mode
Press the cursor ◄► buttons to set the User Mode.
Note: Only available when User 1/2/3 is selected.
(Range: Movie/ Bright / Normal)
Brightness Press the cursor ◄► buttons to adjust the display brightness.
Contrast Press the cursor ◄► buttons to adjust the display contrast.
Color
Press the cursor ◄► buttons to adjust the video saturation.
Notes: This function is only available when Component or Video input source is
selected.
Tint
Press the cursor ◄► buttons to adjust the video tint/hue.
Notes: This function is only available when Component or Video with NTSC
system input source is selected.
Sharpness
Press the cursor ◄► buttons to adjust the display sharpness.
Notes: This function is only available when Video or S-Video input source is selected.
Flesh Tone
Press the cursor ◄► buttons to adjust the display flesh tone.
Notes: This function is only available when Video or S-Video input source is selected.
Save Settings
Press the ENTER button to save all settings.
Notes: Only available when User 1/2/3 is selected.
Reset Picture
Settings
Press the ENTER/SELECT button to reset all settings to default values.
— 16 —
Preface
PICTURE>>Advanced Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Advanced menu. Press ◄► to change values for settings.
ITEM DESCRIPTION
Noise Reduction Press the cursor ◄► button to adjust the Noise Reduction.
Color Temperature Press the cursor ◄► button to set the Color Temperature.
Gamma
Press the cursor ◄► button to adjust the gamma correction of the display.
Notes: This function is only available in User 1/ 2/ 3 mode.
HSG Adjustment
Press the ENTER/SELECT button to enter the HSG (Hue/Saturation/Gain) Adjust-
ment sub menu.
See HSG Adjustment on page 18.
Color Space
Press the cursor ◄► button to set the Color Space.
(Range: Auto/ RGB/ SDTV/ HDTV)
Notes: This function is only available when HDMI input source is selected.
– 17 –
SP8600HD3D/IN8601 User’s Manual
HSG Adjustment
Press the ENTER/SELECT button to enter the HSG Adjustment sub menu.
ITEM DESCRIPTION
Primary Color
Press the ◄► buttons to set the Primary Color.
Notes: There are six colors (R/ G/ B/ C/ M/ Y) to be customized.
Hue Press the ◄► buttons to adjust the Hue.
Saturation Press the ◄► buttons to adjust the Saturation.
Gain Press the ◄► buttons to adjust the Gain.
— 18 —
Preface
DISPLAY Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
DISPLAY menu. Press the cursor ▲▼ button to move up and down in the DISPLAY menu.
Press ◄► to change values for settings.
ITEM DESCRIPTION
Aspect Ratio
Press the cursor ◄► button to set the Aspect Ratio.
(Range: Auto/ 16:9/ 4:3/ Letter Box/ Real)
Keystone Press the cursor ◄► button to adjust the Keystone.
Overscan Press the cursor ◄► button to adjust the Overscan.
PC Detail Adjustment
Press the ENTER/SELECT button to enter the PC Detail Adjustment sub menu.
See PC Detail Adjustment on page 20.
3D Settings
Press the ENTER/SELECT button to enter the 3D Settings sub menu.
See 3D Settings on page 21.
– 19 –
SP8600HD3D/IN8601 User’s Manual
PC Detail Adjustment
Press the ENTER/SELECT button to enter the PC Detail Adjustment sub menu.
Note:
Customizing the settings in PC Detail Adjustment menu is only available when PC input source
(analog RGB) is selected.
ITEM DESCRIPTION
Auto
Press the RE-SYNC button on the projector keypad or the AUTO IMAGE button on
the remote control to automatically adjust frequency, phase, and position.
Frequency Press the ◄► buttons to adjust the A/D sampling number.
Phase Press the ◄► buttons to adjust the A/D sampling clock.
Horizontal Position Press the ◄► buttons to adjust the display position right or left.
Vertical Position Press the ◄► buttons to adjust the display position up or down.
— 20 —
Preface
3D Settings
ITEM DESCRIPTION
3D mode Press the cursor ◄► button to to enable or disable 3D Mode.
2D to 3D mode Press the cursor ◄► button to enable or disable 2D to 3D mode.
3D Type
Press the cursor ◄► button to select 96Hz or 120Hz when a 1080p 24Hz "Frame
Packing" 3D format is used.
Sync Invert
Press the cursor ◄► button to enable or disable sync invert. If the image appears to
flutter, look odd or if the image depth looks off or you experience eye strain, turn this
feature on to see if the image improves.
2D to 3D Deep
Press the cursor ◄► button to adjust the depth of the 3D effect. The positive and
negative 3D Z-axis can be adjusted.
2D to 3D Curve
Press the cursor ◄► button to adjust the 3D curve. Selecting different curve options
affects the relative curve (or flatness) of the displayed 3D image.
Side-by-Side
Press the cursor ◄► button to enable or disable 2D Side-by-Side image conversion.
This feature converts 2D images with Side-by-Side formatting into 3D.
Top-and-Bottom
Press the cursor ◄► button to enable or disable 2D Top-and-Bottom image conver-
sion. This feature converts 2D images with Top-and-Bottom formatting into 3D.
Note:
1. By default, when a 3D compatible source is not detected, the 3D submenu items are unavailable.
2. In addition to the projector, you will need a pair of 3D shutter glasses, 3D content, and 3D compati-
ble source (and emitter). Ensure the glasses you choose are consistent with the synchronization
mode you will be using.
3. Different types of glasses (DLP Link and IR shutter glasses) have their own configuration process.
Follow the manufacturer's documentation to set the glasses up correctly.
– 21 –
SP8600HD3D/IN8601 User’s Manual
SETUP>>Basic Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Basic menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Basic menu. Press ◄► to change values for settings.
ITEM DESCRIPTION
Language
Press the cursor ◄► buttons to select a different localization menu.
(Range: English/ Français/ Deutsch/ Español/ Português/ 簡体中文/ 繁體中文/ Italiano/
Norsk/ Dansk/ Svenska/ Nederlands/ Русский/
한국어
/ Bahasa Indonesian/ ﺔﻴﺑﺮﻌﻟا/
Türkçe/ Việt/ ﯽﺳرﺎﻓ)
Splash Logo
Press the cursor ◄► buttons to select a different startup screen.
(Range: InFocus/ Blue/ Black)
Projection
Press the cursor ◄► buttons to choose from four projection methods:
Front Table/ Front Ceiling/ Rear Table/ Rear Ceiling.
Blank Timer
Press the cursor ◄► buttons to set the Blank Screen timer. The projected image is
automatically restored after the set time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
Auto Power Off
Press the cursor ◄► buttons to set the Auto Power Off timer. The projector automati-
cally turns off if no input source is detected after the preset period of time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
Sleep Timer
Press the cursor ◄► buttons to set Sleep timer. The projector automatically turns off
after the preset period of time.
(Range: Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr)
Background Color
Press the cursor ◄► buttons to select the background color when no input source is
detected.
(Range: Purple/ Black/ Blue)
Menu Settings
Press the ENTER/SELECT button to enter the Menu Settings sub menu. See Menu
Settings on page 23.
Source
Press the ENTER/SELECT button to enter the Source sub menu. See Source on
page 23.
— 22 —
Preface
Menu Settings
Press the ENTER/SELECT button to enter the Menu Settings sub menu.
ITEM DESCRIPTION
Menu Position
Press the ◄► buttons to select from five OSD locations:
Top-Left/ Top-Right/ Center/ Bottom-Left/ Bottom-Right.
Menu Display Time
Press the ◄► buttons to set the Menu Display timer before the OSD times out.
(Range: 5sec/ 10sec/ 15sec/ 20sec/ 25sec/ 30sec)
Source
Press the ENTER/SELECT button to enter the Source sub menu.
ITEM DESCRIPTION
VGA Press the ◄► buttons to enable or disable the VGA source.
HDMI 1
HDMI 2
Press the ◄► buttons to enable or disable the HDMI source.
Component Press the ◄► buttons to enable or disable the Component source.
Video Press the ◄► buttons to enable or disable the Video source.
Quick Auto Search
Press the ◄► buttons to enable or disable Quick Auto Search for available input
source.
Notes: When the desired source is selected, the Quick Auto Search function will be
turned off.
– 23 –
SP8600HD3D/IN8601 User’s Manual
SETUP>>Advanced Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Advanced menu.
ITEM DESCRIPTION
Audio
Press the ENTER/SELECT button to enter the Audio sub menu. See Audio on page
25.
Lamp
Press the ENTER/SELECT button to enter the Lamp sub menu. See Lamp on page
25.
High Altitude Mode
Press the cursor ◄► buttons to turn on or off High Altitude Mode.
Recommended to turn on when the altitude of the environment is higher than 1500m
(4921ft).
Test Pattern Press the cursor ◄► buttons to turn on or off the grid test pattern.
Closed Caption
Press the ENTER/SELECT button to enter the Closed Caption sub menu.
See Closed Caption on page 26.
LED Control
Press the cursor ◄► buttons to turn the projector LED indicators on (Normal) and off
(Off).
Presentation Timer
Press
(ENTER/SELECT) / ► to the Presentation Timer menu.
See Presentation Timer on page 26.
Reset All Press the ENTER/SELECT button to enter reset all settings to default values.
— 24 —
Preface
Audio
Press the ENTER/SELECT button to enter the Audio sub menu.
ITEM DESCRIPTION
Volume Press the ◄► buttons to adjust the audio Volume.
Treble Press the ◄► buttons to adjust the audio Treble.
Bass Press the ◄► buttons to adjust the audio Bass.
Mute Press the ◄► buttons to turn on or off the internal and external speakers.
AGC Press the ◄► buttons to turn on or off the Automatic Gain Control setting.
Reset Press the ENTER/SELECT button to reset all settings to default values.
Lamp
Press the ENTER/SELECT button to enter the Lamp sub menu.
ITEM DESCRIPTION
Lamp Mode Press the ◄► buttons to adjust lamp brightness.
Reset Lamp Timer Press the ENTER/SELECT button to reset the Lamp Hour after the lamp is replaced.
Lamp Hour Displays the number of hours the lamp has been in use.
– 25 –
SP8600HD3D/IN8601 User’s Manual
Closed Caption
Press the ENTER/SELECT button to enter the Closed Caption sub menu.
ITEM DESCRIPTION
Closed Caption En-
able
Press the ◄► buttons to turn on or off Closed Caption.
Caption Version Press the ◄► buttons to select the Caption Version.
Presentation Timer
The Presentation Timer function can indicate the presentation time on the screen to help you achieve
better time management when giving presentations.
ITEM DESCRIPTION
Timer Press the cursor ◄► button to enable or disable presentation timer.
Timer Period Press the cursor ◄► button to select timer period (1 ~ 60 minutes)
Timer Reset Press (ENTER/SELECT) / ► to reset the timer settings.
— 26 —
Preface
STATUS Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
STATUS Menu.
ITEM DESCRIPTION
Display Mode Displays the current display mode.
Aspect Displays the current aspect ratio setting.
Source Displays the activated input source.
Resolution Displays the native resolution of input source.
Lamp Hour Displays the number of hours the lamp has been in use.
Firmware Version Displays the firmware version of the projector.
Note:
Status displayed in this menu is for viewing only and cannot be edited.
– 27 –
SP8600HD3D/IN8601 User’s Manual
— 28 —
MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. Be sure to use the InFocus lamp module de-
signed for this projector. You can order new lamps from www.infocusstore.com (in select areas), your
retailer or your dealer. Only genuine InFocus lamps are tested for use in this projector. Use of non InFo-
cus lamps may cause electrical shock and fire, and may void the projector warranty. InFocus is not liable
for the performance, safety or certification of any other lamps.
Warning:
• The projector uses a high-pressure mercury glass lamp. The lamp may fail prematurely, or it
may rupture with a popping sound if jolted, scratched, or handled while hot. The risk of lamp
failure or rupture also increases as the lamp age increases; please replace the lamp when you
see the “Replace Lamp”
• To avoid burns, allow the projector to cool for at least 60 minutes before you replace the
lamp.
• Do not touch or block the projector lens with any objects as this can damage the projector
lens. Scratches, gouges and other lens damage are not covered by the product warranty.
• Unplug the power cord before replacing the lamp.
• Do not drop the lamp module. The glass may shatter and cause injury.
• Do not touch the glass surface of the lamp module. Fingerprints can obscure projection
sharpness and may cause the glass to shatter.
• Be extremely careful when removing the lamp housing. In the unlikely event that the lamp
ruptures, small glass fragments may be generated. The lamp module is designed to contain
most of these fragments, but use caution when removing it.
• Before replacing a ruptured lamp, clean the lamp compartment and dispose of cleaning mate-
rials. Wash hands after lamp replacement.
• When replacing the lamp while the projector is ceiling-mounted, wear protective eyewear to
prevent eye injury. Hg – Lamp contains mercury. Manage in accordance with local disposal
laws. See www.lamprecycle.org.
• Be sure to turn off and unplug the projector at least 60 minutes before replacing the lamp. Failure
to do so could result in a severe burn.
1.
Pry the screw cover out.
Preface
2.
Remove the single screw
on the lamp compartment
cover, using a small Philips
screwdriver.
3.
Remove the lamp com-
partment cover.
4.
Remove the three screws
from the lamp module
, using
a small Philips screwdriver
.
5.
Lift the module handle up.
– 29 –
SP8600HD3D/IN8601 User’s Manual
6.
Pull firmly on the module
handle to remove the lamp
module.
7.
Reverse steps 1 to 6 to in-
stall the new lamp module.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note: The lamp module
must sit securely in place
and the lamp connector
must be connected properly
before tightening the
screws.
8.
Turn on the projector and reset the lamp after the lamp module is replaced.
Lamp Reset:
a) Press the Menu button and select the SETUP>>Advanced menu.
b) Highlight "Lamp" and press the Enter/Select button to access the Lamp submenu.
c) Select "Reset Lamp Timer" and press Enter/Select.
d) Highlight "Reset" (it will appear blue) and press Enter/Select to reset the lamp counter
to zero.
— 30 —
Preface
– 31 –
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1. Be sure to turn off and unplug the projector at least 60 minutes before cleaning. Failure to do so
could result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the pro-
jector lens.
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the
lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
1. Do not use abrasive cleaners or solvents.
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent, and then wipe the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
SP8600HD3D/IN8601 User’s Manual
— 32 —
TROUBLESHOOTING
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose con-
nection. Check the following before proceeding to the problem-specific solutions.
• Use another electrical device to confirm that the electrical outlet is working.
• Ensure the projector is turned on.
• Ensure all connections are securely attached.
• Ensure the attached device is turned on.
• Ensure a connected PC is not in stand-by mode.
• Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing a Fn-key combination on the notebook. Review your
computer's user documentation for more information.)
Tips for Troubleshooting
In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
Try to pinpoint the problem and avoid replacing non-defective parts.
For example, if you replace batteries and the problem remains, put the original batteries back and go
to the next step.
Keep a record of the steps you take when troubleshooting: The information may be useful when call-
ing Technical Support and obtaining service.
Preface
– 33 –
LED Error Messages
ERROR CODE MESSAGES POWER LED LAMP / READY LED TEMP LED
Powered on Solid Green Solid Red OFF
Powering up Solid Green Flashing Red OFF
Cooling down Solid Green Flashing Red OFF
Over Temperature OFF OFF Solid Red
Thermal Break Sensor error Flashes Green 7x OFF OFF
Lamp error/Color wheel control error Flashes Green 5x OFF OFF
Burner Fan error Flashes Green 6x Flashes Green 1x OFF
Lamp Fan error Flashes Green 6x Flashes Green 2x OFF
Power Fan error Flashes Green 6x Flashes Green 3x OFF
DMD Fan error Flashes Green 6x Flashes Green 4x OFF
Case Open Flashes Green 7x OFF OFF
DMD error/Ignition failed Flashes Green 8x OFF OFF
Color wheel error Flashes Green 9x OFF OFF
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the POWER or LAMP LEDs are still blinking or the TEMP LED is lit, contact
InFocus Technical Support at www.infocus.com/support
.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
3. Many laptops do not automatically turn on their external video port when a projector is
connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto Image button on the remote control or the Re-sync button on the keypad.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Setup >> Basic menu of the OSD.
Problem: The image is streaked
SP8600HD3D/IN8601 User’s Manual
— 34 —
1. Set the Frequency and Phase settings on the Display >> PC Detail Adjustment menu
of the OSD to the default settings.
2. To ensure the problem is not caused by a connected PC’s video card, connect to another
computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Picture >> Basic menu of the OSD.
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Picture >> Advanced menu of
the OSD.
Lamp Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical device.
3. Restart the projector in the correct order and check that the Power LED is green.
4. If you have replaced the lamp recently, try resetting the lamp connections.
5. Replace the lamp module.
6. Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1. Power surges can cause the lamp to turn off. Unplug and re-plug the power cord and
press the Power button.
2. If the lamp still does not ignite, unplug the projector and allow it to cool for 60 minutes.
Replace the lamp.
3. If a new lamp does not resolve the issue, put the old lamp back into the projector and
arrange to have the projector repaired.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check the battery polarity.
5. Replace the batteries.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control replaced.
Preface
– 35 –
Audio Problems
Problem: There is no sound
1. Adjust the volume on the remote control.
2. Adjust the volume of the audio source.
3. Check the audio cable connection.
4. Test the source audio output with other speakers.
5. Have the projector serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the source audio output with other speakers.
3. Have the projector serviced.
Having the Projector Serviced
If you are unable to solve the problem contact InFocus Technical Support at www.infocus.com/support. If
your projector needs repair, pack the projector in the original carton and include the return authorization
number on the outside of the box.
SP8600HD3D/IN8601 User’s Manual
— 36 —
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-
Speed cables.
˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.
˙High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz
or up to 10.2Gbps, which is the highest bandwidth currently available over an HDMI cable
and can successfully handle 1080p signals including those at increased color depths and/or
increased refresh rates from the Source. High-Speed cables are also able to accommodate
higher resolution displays, such as WQXGA cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective
distance from the typical 10 meter range to much longer lengths. These companies
manufacture a variety of solutions that include active cables (active electronics built into
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and
fiber solutions.
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI
Compliance Test Specification. However, there may be instances where cables bearing the
HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively
investigates these instances to ensure that the HDMI trademark is properly used in the
market. We recommend that consumers buy their cables from a reputable source and a
company that is trusted.
For more detailed information, go to: http://www.hdmi.org/learningcenter/faq.aspx#49
Preface
– 37 –
SPECIFICATIONS
Specifications
Model
SP8600HD3D/IN8601
Display type
TI DLP DMD 0.65”
Native Resolution
1920 x 1080
Projection distance
1 meters ~ 10 meters ( 3.28 ft ~ 32.8 ft )
Projection screen size
23.5" ~ 300" ( 59.7cm ~ 762cm )
Projection lens
Manual Focus/Manual Zoom
Zoom ratio
1.2
Vertical keystone correc-
tion
+/- 20 degrees
Projection methods
Front, Rear, Desktop/Ceiling (Rear, Front)
Data compatibility
VGA, SVGA, XGA, SXGA, UXGA, WUXGA, Mac
SDTV/ EDTV/ HDTV
480i, 480p,576i, 576p, 720p, 1080i, 1080p
Video compatibility
NTSC 4.43, PAL (M/N/60), SECAM
H-Sync
15K, 31 – 90 KHz
V-Sync
50 – 85 Hz
Safety certification
FCC-B, UL, cUL, CB, CE, CCC, PCT, PSB, SABS, NOM, CECP/ECO, TUV-GS,
SASO, KC, UL-s for Argentina and C-TICK
Operation temperature
0° ~ 40°C ( 32° ~ 104°F)
Dimensions (W x D x H)
332.8 mm x 254.6 mm x 113 mm (13.1” x 10.0” x 4.45”)
AC Input
AC Universal 100-240, Typical @ 110VAC (100-240)/ 10%
±
Power consumption
STD mode: 300W / ECO mode: 260W
Stand By
RS232 Control Enabled <0.5 watt (Default)
Lamp
STD mode: 230W / ECO mode: 190W
Audio speaker
AMP 3W speaker
Digital: HDMI x 2
Analog: RGB HD-15 x 1
Composite Video x 1
Component (YPbPr RCA x 3) x 1
Input Terminals
Audio in: Φ3.5 mm stereo mini jack x 1; RCA x 1 R/L
Output Terminals
Mini-jack stereo x 1
RS-232: DSUB-9 x 1
Control Terminals
12V Trigger
Security
Security cable lock slot
SP8600HD3D/IN8601 User’s Manual
Projection Distance vs. Projection Size
Projection Distance and Size Table
16:9 SCREEN PROJECTION DISTANCE
DIAGONAL WIDTH HEIGHT
INCH MM MM(INCH) MM(INCH)
MIN
LENGTH
(WITH MAX ZOOM)
AVERAGE
MAX
LENGTH
(WITH MIN ZOOM)
VERTICAL
OFFSET
(A)
MM(INCH)
30 762 664(26) 374(15)
1063(42) 1169(46) 1275(50) 56(2)
40 1016 886(35) 498(20)
1417(56) 1559(61) 1700(67) 75(3)
50 1270 1107(44) 623(25)
1771(70) 1948(77) 2125(84) 93(4)
60 1524 1328(52) 747(29)
2125(84) 2338(92) 2550(100) 112(4)
80 2032 1771(70) 996(39)
2834(112) 3117(123) 3400(134) 149(6)
100 2540 2214(87) 1245(49)
3542(139) 3896(153) 4250(167) 187(7)
120 3048 2657(105) 1494(59)
4250(167) 4676(184) 5101(201) 224(9)
150 3810 3321(131) 1868(74)
5313(209) 5844(230) 6376(251) 280(11)
200 5080 4428(174) 2491(98)
7084(279) 7793(307) 8501(335) 374(15)
220 5588 4870(192) 2740(108)
7793(307) 8572(337) 9351(368) 411(16)
250 6350 5535(218) 3113(123)
8855(349) 9741(383) 10626(418) 467(18)
300 7620 6641(261) 3736(147)
10626(418)
-- --
560(22)
— 38 —
Preface
– 39 –
Timing Mode Table
The projector can display several resolutions. The following table outlines the resolutions that can be
displayed by the projector.
SIGNAL
RESOLUTION
H-SYNC
(KHZ)
V-SYNC
(HZ)
COMPOSITE COMPONENT
RGB
(ANALOG)
HDMI
(DIGITAL)
NTSC — 15.734 60.0 O
—
－ －
PAL/SECAM — 15.625 50.0 O
—
－ －
720 x 400 37.9 85.0
—
—
O O
640 x 480 31.5 60.0
—
—
O O
640 x 480 37.9 72.8
—
—
O O
640 x 480 37.5 75.0
—
—
O O
640 x 480 43.3 85.0
—
—
O O
800 x 600 35.2 56.3
—
—
O O
800 x 600 37.9 60.3
—
—
O O
800 x 600 46.9 75.0
—
—
O O
800 x 600 48.1 72.2
—
—
O O
800 x 600 53.7 85.1
—
—
O O
1024 x 768 48.4 60.0
—
—
O O
1024 x 768 56.5 70.1
—
—
O O
1024 x 768 60.0 75.0
—
—
O O
1024 x 768 68.7 85.0
—
—
O O
1280 x 800 49.7 59.8
—
—
O O
1280 x 800
62.8 74.9
—
—
O O
1280 x 800
71.6 84.8
—
—
O O
1280 x 1024 64.0 60.0
—
—
O O
1280 x 1024 80.0 75.0
—
—
O O
1280 x 1024 91.1 85.0
—
—
O O
1400 x 1050 65.3 60.0
—
—
O O
1440 x 900 55.9 60.0
—
—
O O
1600 x1200 75.0 60
—
—
O O
VESA
1920 x1080 67.2 60
—
—
O O
640 x 480 35.0 66.7
—
—
O O
832 x 624 49.7 74.5
—
—
O O
1024 x 768 60.2 74.9
—
—
O O
Apple
Macintosh
1152 x 870 68.7 75.1
—
—
O O
480i 15.734 60.0
—
O O
O
SDTV
576i 15.625 50.0
—
O O
O
EDTV
576p 31.3 50.0
—
O O
O
SP8600HD3D/IN8601 User’s Manual
— 40 —
SIGNAL
RESOLUTION
H-SYNC
(KHZ)
V-SYNC
(HZ)
COMPOSITE COMPONENT
RGB
(ANALOG)
HDMI
(DIGITAL)
480p 31.5 60.0
—
O O
O
720p 37.5 50.0
—
O O
O
720p 45.0 60.0
—
O O
O
1080i 33.8 60.0
—
O O
O
1080i 28.1 50.0
—
O O
O
1080p 67.5 60.0
—
O O
O
HDTV
1080p 56.3 50.0
—
O O
O
2D to 3D support timings :
RESOLUTION V-SYNC (HZ) COMPOSITE COMPONENT RGB (ANALOG) HDMI (DIGITAL)
800x600 60Hz — — — O
1024x768 60Hz — — — O
1280x720 60Hz — — — O
1280x768 60Hz — — — O
1280x800 60Hz — — — O
1440x900 60Hz — — — O
1280x1024 60Hz — — — O
1400x1050 60Hz — — — O
480i 60Hz — — — O
480p 60Hz — — — O
576i 50Hz — — — O
576p 50Hz — — — O
720p 50Hz — — — O
720p 60Hz — — — O
1080i 50Hz — — — O
1080i 60Hz — — — O
1080p 50Hz — — — O
1080p 60Hz — — — O
Preface
– 41 –
3D support timings:
Frame sequential
RESOLUTION V-SYNC (HZ) COMPOSITE COMPONENT RGB (ANALOG) HDMI (DIGITAL)
720p 100Hz — — — O
720p 120Hz — — — O
Frame packing
RESOLUTION V-SYNC (HZ) COMPOSITE COMPONENT RGB (ANALOG) HDMI (DIGITAL)
720p 50Hz — — — O
720p 60Hz — — — O
1080p 24Hz — — — O
Side-By-Side Half
RESOLUTION V-SYNC (HZ) COMPOSITE COMPONENT RGB (ANALOG) HDMI (DIGITAL)
720p 50Hz — — — O
720p 60Hz — — — O
1080i 50Hz — — — O
1080i 60Hz — — — O
1080p 50Hz — — — O
1080p 60Hz — — — O
Top-and-Bottom
RESOLUTION V-SYNC (HZ) COMPOSITE COMPONENT RGB (ANALOG) HDMI (DIGITAL)
720p 50Hz — — — O
720p 60Hz — — — O
O: Frequency supported
—: Frequency not supported
(*) VGA support EDTV/SDTV/HDTV component with an adapter.
The SP8600HD3D and IN8601 projector's native resolution is 1920 x 1080. Resolutions different than
this may display uneven lines or text.
SP8600HD3D/IN8601 User’s Manual
Projector Dimensions
— 42 —
Preface
– 43 –
REGULATORY COMPLIANCE
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could
void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
WEEE
NOTE: This product is covered electrical and electronic equipment under the European
Union’s Waste from Electrical and electronic Equipment (“WEEE”) Directive (2002/96/EC).
The WEEE Directive requires that covered equipment be collected and managed sepa-
rately from typical household waste in all EU member states. Please follow the guidance of
your local environmental authority or ask the shop where you purchased the product for
collection or recycling options.
Safety Certifications
FCC-B, UL, cUL, CB, CE, CCC, PCT, PSB, SABS, NOM, CECP/ECO, TUV-GS, SASO, KC, UL-s for
Argentina and C-TICK
SP8600HD3D/IN8601 User’s Manual
— 44 —
RS-232C Protocol
RS232 Setting
Baud rate: 9600
Parity check: None
Data bit: 8
Stop bit: 1
Flow Control None
Minimum delay for next command: 1ms
Control Command Structure
The command is structured by the Header code, command code, data code
and end code. Most of the commands are structured except some for the
compatibility issue with other projectors.
Header code Command code Data code End code
HEX 7Eh Command Data 0Dh
ASCII ‘~’ Command Data
CR
Control Sequence
The projector may send a return code after it received a command. If the command isn’t received
correctly, the projector will not send the return code
Operation Command
The operation commands execute the basic operation setting of this projector.
Operation ASCII HEX
Power On
※
~ P N CR
※
7Eh 50h 4Eh 0Dh
Power Off
~ P F CR
7Eh 50h 46h 0Dh
Auto Image
~ A I CR
7Eh 41h 49h 0Dh
Input Select VGA
~ S R CR
7Eh 53h 52h 0Dh
Input Select HDMI1
~ S D CR
7Eh 53h 44h 0Dh
Input Select HDMI2
~ S H CR
7Eh 53h 48h 0Dh
Input Select Video
~ S V CR
7Eh 53h 56h 0Dh
Input Select Component
~ S Y CR
7Eh 53h 59h 0Dh
※
Power On command will not work for 1 minute after the power off command triggered.
※
CR :
Carriage Return.
Preface
– 45 –
Remote Command
The remote commands simulate the code send from IR remote handset.
Button’s name ASCII HEX
UP arrow
~ r U CR
7Eh 72h 55h 0Dh
DOWN arrow
~ r D CR
7Eh 72h 44h 0Dh
LEFT arrow
~ r L CR
7Eh 72h 4Ch 0Dh
RIGHT arrow
~ r R CR
7Eh 72h 52h 0Dh
POWER
~ r P CR
7Eh 72h 50h 0Dh
EXIT
~ r E CR
7Eh 72h 45h 0Dh
INPUT
~ r I CR
7Eh 72h 49h 0Dh
AUTO
~ r A CR
7Eh 72h 41h 0Dh
KEYSTONE+
~ r K CR
7Eh 72h 4Bh 0Dh
KEYSTONE-
~ r J CR
7Eh 72h 4Ah 0Dh
MENU
~ r M CR
7Eh 72h 4Dh 0Dh
STATUS
~ r S CR
7Eh 72h 53h 0Dh
MUTE
~ r T CR
7Eh 72h 54h 0Dh
BLANK
~ r B CR
7Eh 72h 42h 0Dh
FREEZE
~ r F CR
7Eh 72h 46h 0Dh
VOLUME+
~ r V CR
7Eh 72h 56h 0Dh
VOLUME-
~ r W CR
7Eh 72h 57h 0Dh
Enter
~ r N CR
7Eh 72h 4Eh 0Dh
Set Value Command
ITEM ASCII HEX
Brightness
~ s B ? CR
※
7Eh 73h 42h ?h 0Dh
Contrast
~ s C ? CR
7Eh 73h 43h ?h 0Dh
Color
~ s R ? CR
7Eh 73h 52h ?h 0Dh
Tint
~ s N ? CR
7Eh 73h 4Eh ?h 0Dh
Scaling
~ s A ? CR
7Eh 73h 41h ?h 0Dh
Color Temperature
~ s T ? CR
7Eh 73h 54h ?h 0Dh
Projection Mode
~ s J ? CR
7Eh 73h 4Ah ?h 0Dh
※
? : ASCII Data
Data Range
ITEM Set Data Range Source
Brightness(User1~User3 only) 0 ~ 100 ALL
Contrast(User1~User3 only) -50 ~ 50 ALL
Color(User1~User3 only) -50 ~ 50 Video/S-Video/
Component
Tint(User1~User3 only) -50 ~ 50 Video/S-Video/
Component
Scaling
0:AUTO 1: 16:9 2: 4:3 3: LETTER BOX
4:REAL
ALL
Color Temperature
0: Lamp Native 1: Warm 2:Normal 3:
Cool 4:Cooler 5: High Cool
ALL
Projection Mode
0:Front Table 1: Front Ceiling 2: Rear
Table 3:Rear Ceiling
ALL
Attention: 1.Data range may be different for different models
2.Brightness/Contrast/Color/Tint adjustment is only available in User1~User3 pic-
ture mode.
Example 1. Adjust Brightness value to 100
Send Command : ~sB100CR
Example 2. Adjust Color Temperature to Warm
Send Command : ~sT2CR
SP8600HD3D/IN8601 User’s Manual
— 46 —
Query Command
ITEM ASCII HEX
Software Version
~ q V CR
7Eh 71h 56h 0Dh
Power State
~ q P CR
7Eh 71h 50h 0Dh
Input Select
~ q S CR
7Eh 71h 53h 0Dh
Lamp Hours
~ q L CR
7Eh 71h 4Ch 0Dh
Brightness
~ q B CR
7Eh 71h 42h 0Dh
Contrast
~ q C CR
7Eh 71h 43h 0Dh
Color
~ q R CR
7Eh 71h 52h 0Dh
Tint
~ q N CR
7Eh 71h 4Eh 0Dh
Scaling
~ q A CR
7Eh 71h 41h 0Dh
Color Temperature
~ q T CR
7Eh 71h 54h 0Dh
Projection Mode
~ q J CR
7Eh 71h 4Ah 0Dh
Response message
ITEM Response Message examples
Software Version …..
Power State
On Off
Input Select
VGA HDMI1 HDMI2 Video Component
Lamp Hours 2000
Brightness 100
Contrast 50
Color (Video) 50
Tint (Video) 50
Scaling
AUTO 16:9 4:3 LETTER BOX REAL
Color Temperature
Lamp Native Warm Normal Cool Cooler
High Cool
Projection Mode
Front Table Front Ceiling Rear Table
Rear Ceiling
Example 1. Get Brightness value
Send Command : ~qBCR
Response : 100
Example 2. Get Color Temperature
Send Command : ~qTCR
Response : Warm
… 51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw InFocus IN8601 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van InFocus IN8601 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van InFocus IN8601

InFocus IN8601 Gebruiksaanwijzing - Nederlands - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Deutsch - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Français - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Italiano - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Português - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Espanõl - 53 pagina's

InFocus IN8601 Gebruiksaanwijzing - Svenska - 53 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info