504364
9
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
OPERATIONAL INSTRUCTIONS
Headphones jack
The headphones PHONES jack (10) is for headphones with a 30- to 600-Ohm impedance, and
equipped with a 3.5mm jack. Use an adapter (sold in electronic outlets) if your headphone has a
dierent plug. The speakers are automatically switched o when the headphones are being used.
AM/FM radio operation
1. Turn the unit on by pressing
the POWER button (1)/(34).
2. Switch to the Tuner operating
mode by pressing the button
TUNER/BAND (23)/(56).
Manual station selection
1. Press button TUNER/BAND (23)/(56) repeatedly until the desired frequency band appears.
2. Press the buttons TUNING – or TUNING + (12)/(46) or (7)/(44) to tune to the desired radio
stations and have them indicated in the display (3).
3. Briey tapping the TUNING – or TUNING + button step by step alters the reception frequency
upward or downward.
Station search operation
1. Holding down one of the two buttons TUNING or TUNING + (12)/(46) or (7)/(44) for approx. 1 second
starts the search operation and determines the direction of the search. The search operation
simply nds stations with strong signals. Stations with weak reception can only be tuned
in manually.
2. Hold the TUNING – or TUNING + button to start the station search again. During the search
operation, the tuner is muted.
Amplier and Radio Operation - continued
CAUTION Listening at high volumes for an extended period of time may cause
damage to the users hearing.
OPERATIONAL INSTRUCTIONS
Amplier and Radio Operation - continued
Stereo / Mono
Repeatedly pressing the button
ST. / MONO (11) switches between
stereo and mono reception.
The stereo reception of a station
in the FM band is indicated
on the display (3)
In the case of stereo stations with a bad (noisy) reception, we recommend switching tuner to mono
reception. Press the ST. / MONO button. In the display (3), the message STEREO will disappear in
mono mode.
Tuner preset station
Each time the MEM./CLK ADJ. button (22)/(53) is pressed, the memory positions are called up one
after another in ascending number order.
The memory positions are selected directly using the numerical keys 1 - 0 / +10 (35) on the
remote control.
1. Program sites 1 – 9: Press the corresponding key 1- 9.
2. Program sites 10 – 19: Press button +10 and then the appropriate button 0 - 9.
3. Program site 20: Press button +10 twice and then the button 0.
Programming AM and FM stations in memory
The program memory allows you store 32 stations in FM and AM range. Program place selection is
described in the previous operating section.
1. In TUNER mode, select FM or
AM reception
2. Seek out the station required by
“Manual station selection or
“Station search operation
3. Press the MEM./CLK ADJ. (22)/(53)
and then press the REPEAT/PRESET
(8, front panel) or REPEAT/PRESET
(36, remote) until the desired memory preset appears.
iLuv | 16i9300 | V10M10_IM_EN_1111200815 | iLuv
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iluv i9300D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iluv i9300D in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info