160095
11
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
High Fidelity Mini Audio System for iPod
®
i9200
Instruction Manual
Please read this manual carefully before operating and save it for future reference.
Have a question? Visit http://www.i-Luv.com
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 1 -
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 2 -
USER SAFETY GUIDE
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH
AS VASES SHALL BE PLACED ON APPARATUS.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
WARNING
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 3 -
USER SAFETY GUIDE
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15) Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
Alternate Warnings – This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the grounding-type plug.
16) Ventilation – Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
17) The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 4 -
USER SAFETY GUIDE
CLEANING
Always disconnect unit from power supply before attempting to
clean it. Use soft cloth moistened with soapy water, and wipe
gently. Do not use solvents or abrasive materials.
LASER SAFETY
This unit utilizes laser technology. Only a qualified professional
should remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION – CLASS 1 LASER PRODUCT
Use of controls adjustments and/or performance of procedure other
than specified herein may result in hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam. CAUTION: HAZAROUS LASER
RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
YOU CAN HELP TO PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-working
electrical equipment to an appropriate waste disposal center.
FOR USED BATTERIES
Disposed of the used batteries properly. Please follow the local regulations for
the battery disposal.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 5 -
USER SAFETY GUIDE
FCC NOTICE TO A USER IN USA
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC RULES
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
Note: Do not make changes or modify the device in any way. Changes or modifications
not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us, so please take care when operating this
equipment. We strongly recommend you to follow the guideline below in order to prevent
possible damage or loss of hearing.
If you continuously listen to the loud sounds, your hearing will adapt to continuous loud sounds
and will give you the impression that the volume has been reduced. What seems normal to you
may in fact be harmful. To guard against this BEFORE YOUR HEARING ADAPTS, set the
volume at a low level and slowly increase the volume level until you can hear comfortably and
clearly without distortion. Damage to your hearing is accumulative and is irreversible. Any
ringing or discomfort in the ears indicates that the volume is too loud. Once you have
established a comfortable listening level, DO NOT INCREASE THE VOLUME LEVEL
FURTHER.
In the use of headphones, please take more attention. Hearing experts say that listening to a
loud music can damage your hearing, especially when listening to music with headphones.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 6 -
USER SAFETY GUIDE
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners nearby, switch
this unit off when not in use or move it away from the affected radio/television tuner.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television operation (which can be determined by turning the equipment off), the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV technician for help.
WARNING!
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
Mains plug is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use. To be completely disconnected, the apparatus
from supply mains, the mains plug of the apparatus shall be disconnected from the mains
socket outlet completely.
ADDITIONAL IMPORTANT INSTRUCTIONS
Place the apparatus with some distances from the nearby objects or walls for sufficient
ventilations. The ventilation should not be impeded by covering the ventilation openings
with items such as newspapers, table-cloths, curtains, etc.
No naked flame sources such as lighted candles should be placed on the apparatus.
Dispose of used batteries properly. Follow the local regulation for the battery disposal.
Use this apparatus in the moderate climates. It is recommended not to use this apparatus
such in a lighting storm.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 7 -
TABLE OF CONTENTS
GETTING STARTED
Compatibility ………………………………………………………………………………… 9
General Features……………………………………………………………………………
10
Main Unit Assembly and Disassembly …………………………………………………… 11
Speaker Assembly and Disassembly …………………………………………………….
.
11
Wall-mounting Installation …………………………………………………………………. 12
Location of Controls (Front View of Main Unit) …………………………………………
13
Location of Controls (Rear View of Main Unit) ………………………………………….. 14
Antenna Connection …………………………………………………………………….. 15
Speaker Connection ……………………………………………………………………….. 15
A
C Power Connection ……………………………………………………………………
15
Location of Controls (Remote Control) …………………………………………………
15
First Time Use of Remote Control ………………………………………………………
17
Battery Installation (Remote Control) ……………………………………………………
17
OPERATIONAL FEATURES
A
mplifier and Radio Operation ……………………………………………………………. 18
Switching the unit ON ……………………………………………………………
18
Operating mode selection …………………………………………………………… 18
A
djusting the volume …………………………………………………………………
18
Headphone Jack ……………………………………………………………………… 18
A
M/FM radio operation ………………………………………………………………
19
Manual station selection ……………………………………………………………
19
Station search operation ……………………………………………………………
19
Stereo / Mono …………………………………………………………………………
19
Tuner preset station ………………………………………………………………
20
Programming AM and FM stations in memory ……………………………………
20
Changing a program position ………………………………………………………
21
Digital Clock and Timer ……………………………………………………………………. 22
Setting the digital clock ………………………………………………………………
22
Setting the timer ……………………………………………………………………
22
Snooze function ………………………………………………………………………
23
Setting the sleep timer ……………………………………………………………
23
Compact Disc Operation …………………………………………………………………
24
Safety notes for operation of the CD changer ……………………………………
24
CD changer operation ………………………………………………………………
24
Inserting and ejecting the CD ………………………………………………………
24
Playing the entire CD ………………………………………………………………… 25
Pause / Stop …………………………………………………………………………
25
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 8 -
TABLE OF CONTENTS
OPERATIONAL FEATURES (CONTINUED)
Random play …………………………………………………………………………
26
Repeat play …………………………………………………………………………… 26
Track selection ………………………………………………………………………
26
Search operation …………………………………………………………………
27
Track intro-scan ………………………………………………………………………
27
Mute function …………………………………………………………………………
27
Program memory ……………………………………………………………………
27
MP3 Disc Operation ………………………………………………………………………
29
Inserting and ejecting an MP3 disc ………………………………………………… 29
Playing the entire MP3 CD …………………………………………………………
29
Pause / Stop …………………………………………………………………………
30
Playback in random sequence ……………………………………………………… 31
Repeat …………………………………………………………………………………
31
Title introduction ……………………………………………………………………… 32
Programming memory ………………………………………………………………
32
ID3 TAG (Artist / Title) ………………………………………………………………
33
Basic Operation with iPod …………………………………………………………………. 34
Installing the dock adapter …………………………………………………………
34
Playing the iPod ………………………………………………………………………
34
Pause / Stop …………………………………………………………………………
34
Charging your iPod …………………………………………………………………
34
CARE AND MAINTANENCE GUIDE …………………………………………………………
35
SPECIFICATIONS ………………………………………………………………………………
36
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 9 -
GETTING STARTED
COMPATIBILITY
AUDIO CD
1. Disc Size: 12cm / 8cm
2. Disc Type: CD
MP3 CD
1. File Format: MP3 (MPEG 1/2/2.5 Layer 3)
2. Bit Rate: 32Kbps ~ 320Kbps
iPod
®
DIGITAL
AUDIO
PLAYER
1. Compatible with all iPod docking models except
iPod shuffle and iPod 3G.
2. iPod is a trademark of Apple Computer, Inc.
DISC ERROR
This compact disc player has built-in error compensation circuits to correct for minor defects in
a disc. There are limits, however, to the amount of correction available. In some cases, the CD
player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be
caused by defects (such as scratches) in the disc being played, which are too large for the error
compensation circuits to handle. If you encounter this problem, try a new disc before having the
unit serviced. If the CD player operates normally, the skipping problem is probably due to a
defective disc.
Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be
played depending on the condition of the player and the disc.
MP3 (MPEG 1 Audio Layer 3)
MP3, technically referred to as MPEG 1 Audio Layer 3, is one of the popular digital audio
encoding and lossy compression formats. This encoding format was developed to reduce the
amount of data (or audio information) required to represent audio, yet to still reproduce audio
as same as the original uncompressed audio for most listeners.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 10 -
GETTING STARTED
Thank you for purchasing i9200. Unpack the unit and make sure all the accessories are put
aside so they will not be lost. We recommend that you retain the original carton and packaging
materials for future use, should you transport or ship the unit in the future.
Enhance Your Enjoyment of the Music on Your iPod
®
with iLuv High Fidelity Mini Audio
System
4 MP3 CD / Audio CD playback system with the integrated universal dock for your iPod
Powerful 2-way speakers allow you to enjoy your favorite songs on your iPod with depth
and clarity
Play and charge your iPod *
Supports Random, Repeat, Intro, and Program functions
Programmable memory for 40 audio tracks
Provides a variety of convenient functions, such as Mute, Sleep, Timer and more
Enjoy AM / FM radio with the PLL digital tuning technology
Programmable presets for 32 radio stations (16 for AM / 16 for FM)
Real time clock display with the sleep function
Timer function with the snooze capability
Integrated Liquid Crystal Display (LCD) with the white backlight
Motorized CD door mechanism
Remote control included
In the box
High-fidelity mini audio system
Remote control (battery included)
Wall-mounting kit
Dock adapters
Pedestal stands
AC power cord
Instruction manual
Warranty card
*
Compatible with all iPod docking models except iPod shuffle and iPod 3G.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 11 -
GETTING STARTED
CAUTION - This product may be used only with iLuv i9200 stand. Use with other stands may
result in instability causing possible injury.
Main Unit Assembly and Disassembly
Speaker Assembly and Disassembly
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 12 -
GETTING STARTED
Wall-mounting Installation
Secure the center unit and speakers on the wall (as shown below) using 8 dowels and 8 screws
(supplied)
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 13 -
GETTING STARTED
Location of Controls (Front View of Main Unit)
1. POWER Button
Used to turn the system on and off
2. Right CD Door
3. Display
4. VOLUME UP/DOWN Button
Used to select the desired volume
5. CD Selection Buttons
Selects a CD to play from one of the 4
players
6. RANDOM
CD playback in random sequence
7. TUNING + SKIP/SEARCH Button
CD forward title selection / CD forward
search operation / Manual tuning of
stations, station search operation
8. REPEAT/PRESET Button
Press to select the repeat mode and to
preset radio stations
9. DISPLAY MODE Button
Switching to time display (TIMER ON /
OFF)
10. HEADPHONES Jack
Stereo headphone socket: accepts
3.5mm plug
11. STOP/ST. /MONO Button
Interrupts the CD playback / clearing the
CD program, provides stereo-mono
switching for FM stations
12. TUNING - SKIP/SEARCH Button
CD backward title selection / CD
backward search operation / Manual
tuning of stations, station search
operation
13. X|| CD PLAY/PAUSE Button
Initiates CD operation and starts CD
playback / pauses CD playback
14. INTRO Button
Plays 10 seconds of each CD/MP3 track
15. OPEN/CLOSE R Button
Opens and closes the right CD changer
door
16. OPEN/CLOSE L Button
Opens and closes the left CD changer
door
17. MP3 MODE Button
Selects TITLE or ALBUM (folder) in MP3
mode
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 14 -
GETTING STARTED
Location of Controls (Front View of Main Unit) – Continued
18. TIMER Button
Activates the timer
19. FOLDER DOWN Button
Move to the next MP3 folder in
descending order
20. MEM./CLK ADJ. Button
Supplies memory functions for tuner
station presets, clock setting, and CD
programming
21. Remote Sensor
Receives infrared signals from the
remote control
22. iPod PLAY/PAUSE X|| Button
Starts iPod playback / Pauses iPod
playback.
23. BAND Button
Selects the AM, FM, or FM/Stereo
reception bands
24. FOLDER UP Button
Move to the next MP3 folder in
ascending order
25. MUTE Button
Temporarily switches off the audio if
desired
26. Left CD Door
27. Dock
28. iPod Dock Cover
Location of Controls (Rear View of Main Unit)
29. AC
Plug the AC power cord into this socket
before plugging it into the wall outlet.
Note: When the system is connected to
AC power, parts of the unit may be in
operation due to its stand-by feature. In
order to turn the system completely off,
remove the AC power cord from the AC
outlet.
30. FM ANT.
FM antenna “pigtail” wire
31. SPEAKERS R
Terminals for the right channel speaker
32. SPEAKERS L
Terminals for the left channel speaker
33. SUBWOOFER Output Jack
Optionally, connect an external
subwoofer speaker (not included)
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 15 -
GETTING STARTED
Antenna Connection
You can achieve acceptable reception if you use the supplied FM pigtail antenna. If so, the
antenna should be elongated and not coiled or bunched up. If it hangs freely, it can be quite
effective.
Speaker Connection
Insert LEFT speaker’s striped wire into LEFT channel’s speaker block (32) by pressing the RED
lever and inserting the striped wire into the open hole. Do the same with the LEFT speaker’s
non-striped wire and the BLACK lever. Repeat for the RIGHT channel SPEAKER block (31)
and the RIGHT speaker’s wire.
AC Power Connection
Connect the power cable (included in the accessories) first to the power socket (29) at the unit
and then insert the power plug into the wall outlet. When you disconnect the plug from a socket,
do not pull the cable, always pull the plug.
Note: As soon as the unit has been connected to AC power, parts of the unit are in operation,
due to the standby function. To switch off the unit completely, remove the plug from the AC
outlet.
Once the unit is plugged in, its time display (3) starts flashing, refer to "Setting the digital
clock" on P.19.
Location of Controls (Remote Control)
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 16 -
GETTING STARTED
Location of Controls (Remote Control) – Continued
34. POWER Button
Used to turn the system on and off
35. 0 - 9, +10 NUMERIC Buttons
Recalls TUNER preset stations / Choose
CD tracks
36. REPEAT/PRESET Button
Selects among CD playback repeat
functions / Programs AM and FM radio
stations
37. RANDOM Button
Randomizes the playback of CD tracks
38. iPod Button
Selects iPod mode
39. iPod SKIP Button
iPod forward search operation
40. SNOOZE Button
Turns off the unit for 9 minutes, after
which the unit will then resume its
previous function
41. X|| CD PLAY/PAUSE Button
Initiates CD operation and starts CD
playback / Pauses CD playback
42. DISPLAY MODE Button
Switching to time display (TIMER ON /
OFF)
43. VOLUME + Button
Raises the desired volume (louder)
44. TUNING + SKIP/SEARCH Button
CD forward title selection / CD forward
search operation / Manual tuning of
stations, station search operation
45. VOLUME - Button
Lowers the desired volume
46. TUNING - SKIP/SEARCH Button
CD backward title selection / CD
backward search operation / Manual
tuning of stations, station search
operation
47. FOLDER T Button
Activates the MP3 folders (in descending
order)
48. STOP Button
Stops CD playback / Clears the CD
program memory
49. FOLDER S Button
Activates the MP3 folder (in ascending
order)
50. iPod PLAY/PAUSE X|| Button
To start iPod playback/Pauses
interruption of iPod playback
51. iPod SKIP Button
iPod backwards search operation
52. DISC 1 - 4 Button
Selects a CD to play from one of the 4
players
53. MEMORY Button
Supplies memory functions for tuner
station presets
54. MP3 MODE Button
Selects TITLE or ALBUM (folder) in MP3
mode
55. SLEEP Button
Set the automatic switch-off time
56. TUNER/BAND Button
Activates the TUNER and selects the
AM, FM, or FM/Stereo reception bands
57. TIMER Button
Activates the timer
58. MUTE Button
Temporarily silences the audio
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 17 -
GETTING STARTED
First Time Use of Remote Control
For the first time use, the battery is pre-installed for your convenience. Pull out the insulation
tag from the button battery tray before operating the remote control as shown below.
Battery Installation
1. Remove the battery tray by pressing point (1a) inside, then
sliding area (1b) at the same time.
2. Pull out the battery tray.
3. Install or replace the button-type battery “CR2032” (supplied).
4. Close the battery tray.
Warning: Danger of explosion if battery is incorrectly replaced. Replace only with or equivalent
type.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 18 -
OPERATIONAL FEATURE
Amplifier and Radio Operation
Switching the unit ON
Press the POWER button (1)/(34) to turn on the system.
Operating mode selection
The different operating modes can be directly selected using the buttons PLAY/PAUSE X||
(13)/(41) for CD operation and TUNER/BAND (23)/(56) for radio reception.
1. PLAY/PAUSE
X||: Playback from the built-in compact disc player
2. TUNER/BAND: Radio, selection of the frequency bands
Adjusting the volume
To adjust the volume, press the VOLUME UP/DOWN buttons (4)/(43)/(45).
To turn the sound off, press the MUTE button (25)/(58). This function is indicated when the
word, MUTE appears in the display (3).
By pressing the MUTE or VOLUME UP/DOWN buttons (4)/(43)/(45) again, the sound will turn
back on.
Caution! High volumes, especially with headphones, may damage your hearing. Hearing
experts advise not to hear music with high volume for a long period of time.
Headphones jack
The headphones PHONES jack (10) is for headphones with a 30- to 600-Ohm impedance, and
equipped with a 3.5mm jack. Use an adapter (sold in electronic outlets) if your headphone has
a different plug. The speakers are automatically switched off when the headphones are being
used.
Caution! Listening at high volumes for an extended period of time may cause damage to the
users hearing.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 19 -
OPERATIONAL FEATURE
Amplifier and Radio Operation – Continued
AM/FM radio operation
1. Turn the unit on by pressing the POWER button (1)/(34).
2. Switch to the Tuner operating mode by pressing the button TUNER/BAND (23)/(56).
Manual station selection
1. Press button TUNER/BAND (23)/(56) repeatedly until the desired frequency band appears.
2. Press the buttons TUNING - or TUNING + (12)/(46) or (7)/(44) to tune to the desired radio
stations and have them indicated in the display (3).
3. Briefly tapping the TUNING - or TUNING + button step by step alters the reception
frequency upward or downward.
Station search operation
1. Holding down one of the two buttons TUNING - or TUNING + (12)/(46) or (7)/(44) for
approx. 1 second starts the search operation and determines the direction of the search.
The search operation simply finds stations with strong signals. Stations with weak
reception can only be tuned in manually.
2. Hold the TUNING - or TUNING + button to start the station search again. During the
search operation, the tuner is muted.
Stereo / Mono
Repeatedly pressing the button ST. / MONO (11) switches between stereo and mono reception.
The stereo reception of a station in the FM band is indicated on the display (3)
In the case of stereo stations with a bad (noisy) reception, we recommend switching tuner to
mono reception. Press the ST. / MONO button. In the display (3), the message STEREO will
disappear in mono mode.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 20 -
OPERATIONAL FEATURE
Amplifier and Radio Operation – Continued
Tuner preset station
Each time the MEM./CLK ADJ. button (20)/(53) is pressed, the memory positions are called up
one after another in ascending number order.
The memory positions are selected directly using the numerical keys 1 - 0 / +10 (35) on the
remote control.
1. Program sites 1 – 9: press the corresponding key 1- 9.
2. Program sites 10 – 19: Press button +10 and then the appropriate button 0 - 9.
3. Program site 20: Press button +10 twice and then the button 0.
Programming AM and FM stations in memory
The program memory allows you store 32 stations in FM and AM range. Program place
selection is described in the previous operating section.
1. In TUNER mode, select FM or AM reception.
2. Seek out the station required by "Manual station selection" or "Station search operation".
3. Press the MEM./CLK ADJ. (20)/(53) and then press the REPEAT/PRESET (8, front panel)
or REPEAT/PRESET (36, remote) until the desired memory preset appears.
4. Press the MEM./CLK ADJ. button again to store the station along with its preset. Repeat
as required.
Note: You can also directly select the desired program preset by pressing numeric buttons
0~9 / +10 (35) on the remote control. Store any remaining stations by repeating the
process.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 21 -
OPERATIONAL FEATURE
Amplifier and Radio Operation – Continued
Changing a program position
If a memory position needs to be replaced by a station other than the current one, the new
station can be programmed as described above, and this will automatically replace the original
station.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 22 -
OPERATIONAL FEATURE
Digital Clock and Timer
Setting the digital clock
When you first plug in the unit, the display shows:
Note: The unit uses 12 hour format. To set the clock to the current time, proceed as follows:
1. Press MEM./CLK ADJ. and the hour will begin to flash.
2. Enter the hour by pressing the buttons TUNING + SKIP/SEARCH or TUNING -
SKIP/SEARCH.
3. Confirm the hour entry by pressing MEM./CLK ADJ. The minutes will then begin to flash.
4. Enter the minutes by pressing the buttons TUNING + SKIP/SEARCH or
TUNING -
SKIP/SEARCH and confirm with MEM./CLK ADJ.
To switch to the clock display while in tuner and CD modes, press DISPLAY MODE. The time
is displayed for approximately 5 seconds. The time is also displayed when the unit is turned off.
Setting the timer
You can set automatic switch-on and switch-off times with the built-in timer. Before you do this,
be sure the clock is set correctly.
1. With the unit on, press DISPLAY MODE (9)/(42), as required, until TIMER ON appears in
the display.
2. Press MEM./CLK ADJ. (20)/(53) and the hour will begin to flash. Use the TUNING +
SKIP/SEARCH or TUNING - SKIP/SEARCH to set the hour of the desired switch-on
time.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 23 -
OPERATIONAL FEATURE
Digital Clock and Timer – Continued
Setting the timer – Continued
3. To set the minutes, press the MEM./CLK ADJ. again and use TUNING +
SKIP/SEARCH or TUNING - SKIP/SEARCH to adjust. Confirm by pressing MEM./CLK
ADJ.
4. Press DISPLAY MODE to proceed to setting the switch-off time.
5. Set the switch-off time using the same procedure as switch-on time setting.
6. Press DISPLAY MODE, as required to check the current time, Timer On, and Timer Off.
7. Press TIMER (18)/(57) to activate the timer.
When the unit is in standby, it will automatically switch on for the programmed length of time in
the last operating mode (CD, iPod or TUNER), in which mode this unit was before switched off.
Make sure the tuner is tuned to a radio station. For CD or iPod, a CD or iPod must be inserted
properly.
Snooze function: When the unit is switched on by means of the timer, you can press the
SNOOZE button (40) to switch the unit off for approximately 9 minutes. After this time, the unit
switches on again. You can press SNOOZE again, or switch the unit off by pressing POWER.
Setting the sleep timer
When the unit is in operation it can be set to automatically switch-off 10 to 90 minutes later.
Press SLEEP button (55), as required, until the desired delay time appears on the display. The
SLEEP timer can be set for: 90, 80, 70, 60, 50, 40, 30, 20, and 10 minute intervals. The unit
automatically turns off after the entered time has elapsed.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 24 -
OPERATIONAL FEATURE
Compact Disc Operation
Safety notes for operation of the CD changer
Press one of the OPEN / CLOSE buttons (15) or (16) to open the right or left CD cover (2) or
(26). The right and left CD cover do not open or close at the same time. Make sure the cover is
not obstructed by any objects. This must also be ensured when closing the CD cover. The disc
loader may only be opened or closed by pressing either the button OPEN / CLOSE. Take care
that no foreign objects can fall into the unit when the disc compartment is open.
Under no circumstance should the laser pick up lens be touched. Never look directly at
the beam.
CD changer operation
Switch the unit on by pressing the POWER button (1)/(34). To turn on the CD mode, press the
button X|| PLAY / PAUSE (13)/(41) or any one of the DISC 1-4 buttons (5) or (52). If one or
more CD(s) have already been inserted in the chosen location(s), playback is started.
(TOC means Table of Contents) If there is no CD inside, the following will appear after a few
seconds:
Inserting and ejecting the CD
The CD compartment (2)/(26) is opened for inserting or removing compact discs by pressing
the OPEN / CLOSE (15) or (16) button.
1. Insert the disc with the unlabelled side facing the unit. Press the center of the CD onto the
black holder that is fitted with 3 retaining bearings.
2. To remove the CD, hold it by the edges and lightly press on the holder to remove it.
3. Then close the disc compartment by pressing the OPEN / CLOSE button (15) or (16).
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 25 -
OPERATIONAL FEATURE
Compact Disc Operation – Continued
Inserting and ejecting the CD – Continued
After having closed the disc cover, the CD system immediately begins to scan the content of
the compact disc. After that, CD will start playback automatically if disc is read properly.
Playing the entire CD
Select the desired CD with the button CD SELECTION 1 - 4 (5) or DISC 1 - 4 (52) on the
remote. Once selected, playback will begin automatically.
If playback of one CD has finished, the playback of the next inserted CD will begin, and this
process will repeat itself.
Note: If the CD player is in the stop position, you can start the currently indicated CD by
pressing the button X|| PLAY / PAUSE (13)/(41). If you select a different CD by pressing the
buttons CD SELECTION 1 - 4 (5) or DISC 1 - 4 (52), playback will start automatically.
Pause / Stop
To briefly interrupt playback, press the X|| PLAY / PAUSE button (13)/(41). The display
indicates:
1. Press X|| PLAY / PAUSE button again to restart play.
2. To end the playback, press the STOP button (11)/(48).
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 26 -
OPERATIONAL FEATURE
Compact Disc Operation – Continued
Random play
1. Press RANDOM before or during CD play. The tracks in the CD will be played in random
sequence.
2. To cancel random play, press STOP, or press the RANDOM button again.
Repeat play
1. Press REPEAT once and the track being played will replay continuously.
2. Press REPEAT twice to have the entire CD played continuously.
3. Press REPEAT three times to have all the inserted CDs (up to 4) played continuously.
Track selection
Press TUNING + SKIP/SEARCH and
TUNING - SKIP/SEARCH to select the desired
tracks. The tracks can be selected directly by pressing the corresponding numerical buttons 1 -
0 / +10. The selected number appears on the display. If the CD player is in stop mode, play
starts automatically when a track is selected using the numerical buttons.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 27 -
OPERATIONAL FEATURE
Compact Disc Operation – Continued
Search operation
While the CD is in play mode you can scan tracks by holding down TUNING +
SKIP/SEARCH and TUNING - SKIP/SEARCH. The CD will continue to play until you find the
track you want. When you release the button the unit will resume normal play mode.
Track intro-scan
1. Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted
CDs.
2. Press INTRO again and the selected track will play.
Mute function
If the MUTE button is pressed, the audio output will be muted, and the "MUTE" indicator will be
displayed. To cancel “MUTE” press the MUTE button once more or press the VOLUME
UP/DOWN button.
Program memory
The built-in program memory lets you play up to 40 tracks (from up to 4 CDs) in the order of
your choice. A track can be stored more than once within the program.
1. Load the CDs.
2. Press MEM./CLK ADJ. (20)/(53) in the stop mode to switch to programming mode.
3. Select a CD by pressing the corresponding DISC 1 - 4 button.
4. Select the desired track using the numerical buttons 0 - 9 / +10 on the remote control or by
repeatedly pressing TUNING + SKIP/SEARCH and TUNING + SKIP/SEARCH.
5. Press MEM./CLK ADJ. to save the track in the first program location. For example, if you
selected CD 1, track number 14, it will appear in Program position 1 as shown below
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 28 -
OPERATIONAL FEATURE
Compact Disc Operation – Continued
Program memory – Continued
6. For the next program position, reselect this or another CD and select a track.
7. Confirm the selection using the MEM./CLK ADJ. button.
8. To program other tracks in the memory, repeat steps 3 - 7.
9. To play the program, press X|| PLAY/PAUSE. The program can be played back again as
long as MEMORY appears on the display.
To clear the programming and resume normal playback
The programming is erased by pressing STOP until the MEMORY display disappears, or by
opening the CD changer door. If the unit is switched off, the program is not erased.
Note:
1. RANDOM will not function in programmed play.
2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3
file(s). If you select a folder which doesn’t contain any MP3 file(s), the unit will
automatically skip to the next folder until it finds one containing an MP3 file(s).
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 29 -
OPERATIONAL FEATURE
MP3 Disc Operation
Inserting and ejecting an MP3 disc
The CD compartments (2)/(26) are opened for inserting or removing compact discs by pressing
the OPEN / CLOSE (15)/(16) buttons.
1. Insert the MP3 disc with the unlabelled side facing the unit. Press the center of the CD
onto the black holder fitted with 3 retaining bearings.
2. To remove the CD, hold it by the edges and remove it by gently pressing on the black
holder.
3. Then close the disc compartment by pressing the OPEN / CLOSE button (15) or (16).
After having closed the disc cover, the CD system begins immediately to scan the content of
compact disc inserted. After that, CD will be start playback automatically if read disc properly.
Playing the entire MP3 CD
1. Select the desired CD with the button CD SELECTION 1 - 4 (5) or DISC 1 - 4 (52) on the
remote. Playback begins automatically.
2. To stop the disc playing, press the STOP button (11)/(48)
3. Press the FOLDER S or T button (24)/ (19) or (49)/(47) to select desired MP3 album.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 30 -
OPERATIONAL FEATURE
MP3 Disc Operation – Continued
Playing the entire MP3 CD – Continued
4. Press the X|| PLAY/PAUSE button to play the MP3 disc.
Pause / Stop
1. To briefly pause playback, press the X|| PLAY / PAUSE button (13)/(41). Display
indicates:
2. Press X|| PLAY / PAUSE button again to restart play.
3. To end the playback, press the STOP button (11)/(48).
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 31 -
OPERATIONAL FEATURE
MP3 Disc Operation – Continued
Playback in random sequence
Press the RANDOM button (6)/(37) in stop condition to start random play.
By pressing button STOP (11)/(48), the random playback is cancelled. This function can be
switched off by pressing the RANDOM button again.
Repeat
1. Press the REPEAT button during MP3 playback to have the title currently being played
repeat continuously.
2. Press the REPEAT button again to have the entire MP3 disc played continuously.
3. Press the REPEAT button a third time to have all the inserted MP3 discs played
continuously.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 32 -
OPERATIONAL FEATURE
MP3 Disc Operation – Continued
Title introduction
1. Press the INTRO button (14) during stop mode to playback the first 10 seconds of each
title.
2. Press the INTRO button again and the CD player plays will play the currently selected
track.
Programming memory
The built-in program memory enables up to 40 titles to be played from up to 4 CDs in the order
of your choice. Any title can be stored more than once within one program.
1. Insert a CD in its compartment.
2. By pressing the button MEM./CLK ADJ. (20)/(53) in the stop mode you can switch to the
programming mode.
3. Select the desired title using the numeric buttons 0 - 9 / +10 (35) on the remote control
device or by repeatedly pressing TUNING + or TUNING -
4. Press the MEM./CLK ADJ. (20)/(53) to save the title on the first program location. In
display unit (3) appears:
5. Confirm selection using the MEM./CLK ADJ. button (20)/(53).
6. To store the remaining titles in the memory, repeat Steps 3-5.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 33 -
OPERATIONAL FEATURE
MP3 Disc Operation – Continued
Programming memory – Continued
To play back the program, press the X|| PLAY / PAUSE button (13)/(41). When X|| PLAY /
PAUSE is pressed, the program can be played back again as long as MEMORY appears on
the display unit (3).
To Clear the Program (Resume Normal Playback):
The programming is erased by pressing the STOP button (11)/(48) in the programming mode
(until the MEMORY display disappears), or by opening the disc compartment.
Note: RANDOM button is not used for programming.
ID3 TAG (Artist/Title)
1. When an MP3 disc is playing, press the MP3 MODE button repeatedly. The track no., title
and artist information will be shown in the display if disc information is available.
2. To resume normal play display, press the MP3 MODE button repeatedly until playing time
reappears.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 34 -
OPERATIONAL FEATURE
Basic Operation with iPod
Installing the dock adapter
Before docking your iPod on i9200, a dock adapter must be properly installed. Please make
sure you are using a correct dock adapter for your iPod and that it is properly inserted into the
universal wall of i9200. Failure to do so may damage your iPod.
Playing the iPod
1. Insert the already playing iPod in the universal dock.
2. Press the iPod PLAY/PAUSE X|| button. The display
will show “Detect iPod State” and an “iPod” icon. At
the same time, i9200 will automatically turn on, and
you will hear the music playing from your iPod.
3. Press the iPod SKIP or button (51) or (44) to
select desired track.
Pause / stop
To briefly interrupt playback, press the iPod PLAY/PAUSE
X|| button (22)/(50). The display will show “PLAY/PAUSE
SET” for a second then back to normal mode.
1. Press iPod PLAY / PAUSE X|| button again to restart play.
2. To end the iPod playback, select CD or TUNER mode, or press the POWER button to off
Charging your iPod
To charge your iPod, insert your iPod into the built-in universal dock. Ensure that i9200 is
connected to an outlet.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 35 -
CARE AND MAINTENANCE GUIDE
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to
contact with the shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged
(scratched).
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the
disc. Never wipe in circular motions.
To remove a disc from its storage case, press down on the centre of the case and lift the
disc outs, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft
cloth. Unlike conventional records. compact disc have no groove to collect dust and
microscopic debris, so gently wiping with a soft cloth should remove most particles.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinets.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
Caution: never allow any water or other liquids to get inside the unit while cleaning.
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 36 -
SPECIFICATIONS
GENERAL
1. Power requirement
a. AC: 120V ~ 60Hz
b. DC: 1 x CR2032 for Remote Control
2. Power consumption: 35 Watts
3. Unit Dimension (w/ stand)
a. Unit: 440 (W) x 110 (D) x 428 (H) mm (17.3” x 4.5” x 16.9”)
b. Speakers: 148 (W) x 108 (D) x 415 (H) mm (5.8” x 4.3” x 16.3”)
RECEIVER SECTION
1. Receiving bands: AM/FM
2. Tuning range
a. AM 520 - 1710KHz
b. FM 87.5 - 108MHz
CD PLAYER SECTION
1. Playback system: 4 CD front loading changer
2. Frequency response: 60 - 18,000 Hz
AUDIO SECTION
1. Power output: 10 Watts (RMS) per channel
2. Speaker impedance: 3 ohms
3. Headphone impedance: 8 - 32 ohms
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 37 -
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 38 -
High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 39 -
TEL: 516-626-7188
FAX: 516-626-7105
website: www.i-Luv.com
e-mail: info@i-Luv.com
iLuv is a trademark of jWIN Electronics Corp. iPod is a trademark of Apple Inc. All logos and
brands are the property of their respective owners. iPod is not included in this package. The
specifications and product images or graphics may slightly differ from the actual product.
Features and specifications are subject to change without prior notification.
© 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or
product enclosed herewith including design, shape and graphics, may be reproduced or
transmitted in any form without the expressed written consent of jWIN Electronics Corp. by
any means, electronic or mechanical, including photocopying, recording or use of an
information storage and retrieval system. Any unauthorized distribution or reproduction of
this printed material or product, or any portion there of, will be prosecuted to the fullest
possible extent of the law.
Printed in China
77
-
20
i
92000002
3
(English)
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iluv i9200blk bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iluv i9200blk in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info