Warning:
- Contact with steam and with the steam wand may cause severe burns.
- If the machine is cold, do not open the steam knob, and never while it is submerged in milk.
- If no steam is dispensed, after a few minutes the machine will automatically switch back to the coffee brewing function.
- While the machine is warming up and as long as it remains in the steam mode, it carries out heating cycles in the boiler which may
cause small amounts of steam to be discharged from the capsule holder: therefore, keep limbs and other parts of the body away from
the coffee brew zone in order to avoid scalding.
7
9
8
- Submerge the steam wand completely into the milk 7.
- Turn the steam knob counterclockwise 8 and wait for the milk to
froth.
- On reaching the desired result, close the steam knob by turning
it
clockwise 8.
- Thoroughly clean the steam wand 9 of milk residue:
- Open the steam knob for a few seconds.
- Close the steam knob.
- Wait a few minutes for it cool down.
- Remove the outer part Z and wash it under running water.
- Wipe the inside part X clean with a wet cloth.
Note: The two end parts of the steam wand can also be washed in a dishwasher; in this case also remove the
inside part from the metal tube. After cleaning, fit the inside part X all the way onto the steam wand; then fit
the outer part Z.
Z
X
