779266
5
Verklein
Vergroot
Pagina terug
1/176
Pagina verder
5
Getting started:
1. Connect mains cord into AC In (2) connector.
2. A quick press on the knob (1) turn the speaker
On. ENEBY 20/30 starts to search for paired
devices. If a paired device is found, the LED
shines without blinking and your speaker is
ready to use.
3. If no device is found the speaker LED continues
to blink and enters pairing mode automatically.
Go to the Bluetooth settings in your mobile
device and connect to ENEBY 20/30. The LED
should now stop blinking and your speaker is
ready to use. If no music has been playing for
20min, the speaker will enter sleep mode.
Adjust Volume
Turn the knob (1) left to decrease or turn it right to
increase volume level.
Add additional Bluetooth device(s)
(max 8 devices)
1. Make sure no other device is paired and in range
to the speaker.
2. Go to your Bluetooth menu on your mobile
device and connect to ENEBY 20/30.
3. Once Bluetooth connection is established, the
white LED stops blinking.
Unpair Bluetooth device
Go to your Bluetooth menu on your mobile device
and unpair ENEBY 20/30 from your devices.
Play music from external source:
Connect a portable audio device to the AUDIO IN (3)
jack on the rear panel. The speaker automatically
detects the external input and disables Bluetooth
functionality. Use a 3.5mm 3-pol Audio cable for
this feature.
Use speaker throughout home:
ENEBY 20 has the possibility to be portable. ENEBY
battery pack is sold separately.
To insert the battery, open the compartment lid
(5) and insert the battery in the correct direction.
The battery is charging in the product when
mains cord is connected and the speaker is
turned on.
When battery is low a red LED in the knob (1) will
ash. During charging the red LED is on.
Attach Speaker to a wall or a stand:
ENEBY wall mount and ENEBY stand are accessories
and are sold separately.
Use holes (4) and included screws to mount stand
or wall mount. Do not over tighten the screws.
Other Settings
Unpair Bluetooth devices Press and hold the knob (1). Release the knob when the LED light turns
red the rst time.
A conrmation sound will be played.
(Note that on some phone models you also need to remove
ENEBY20/30 from the phone’s paired devices list to be able to pair
again.)
Set up a stereo pair You can pair two identical ENEBY speakers to create a wider stereo
experience. In this conguration, one speaker serves as the left
channel and the other serves as the right channel. On/O and Volume
need to be controlled individually on each speaker.
1. Turn on both speakers.
2. Press and hold the knobs (1) at the same time. Release the knobs
when the LED light turns red the second time.
Wait 2 seconds. A conrmation sound will be played.
3. Press the knob (1) once again on one of the speakers.This speaker is
now assigned as the left channel.
4. Open the Bluetooth setting on your mobile device and connect to
ENEBY speaker for the left channel.
To disable the stereo pair, follow instructions “Unpair Bluetooth
devices” on both speakers.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ikea 904.575.56 Eneby bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ikea 904.575.56 Eneby in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5.1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info