430284
10
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
ENGLISH
We reserve the right to change speci cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ..........................................................................1
SAFETY PRECAUTIONS ..............................................................1
SPECIAL NOTES ON LCD MONITORS .......................................3
CUSTOMER SERVICE .................................................................3
CLEANING ....................................................................................3
BEFORE YOU OPERATE THE MONITOR ........................................4
FEATURES ....................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ......................5
SPECIAL NOTES ON TOUCH PANEL ..........................................5
WALL MOUNTING ........................................................................5
BUILT-IN EQUIPMENT ..................................................................5
CONTROLS AND CONNECTORS ................................................6
CONNECTING YOUR MONITOR .................................................7
COMPUTER SETTING .................................................................8
ADJUSTING THE VIEWING ANGLE ...........................................8
OPERATING THE MONITOR .............................................................9
ADJUSTMENT MENU CONTENTS ............................................10
SCREEN ADJUSTMENTS ..........................................................15
POWER MANAGEMENT FEATURE ...........................................18
TROUBLE SHOOTING ....................................................................19
RECYCLING INFORMATION ...........................................................20
APPENDIX ......................................................................................21
SPECIFICATIONS : ProLite T1531SR ........................................21
SPECIFICATIONS : ProLite T1531SAW .....................................23
SPECIFICATIONS : ProLite T1532SR ........................................25
SPECIFICATIONS : ProLite T1731SR ........................................27
SPECIFICATIONS : ProLite T1731SAW .....................................28
SPECIFICATIONS : ProLite T1931SR ........................................29
SPECIFICATIONS : ProLite T1931SAW .....................................30
DIMENSIONS :
ProLite T1531SR
/ ProLite T1531SAW / ProLite T1532SR ........... 31
DIMENSIONS : ProLite T1731SR / ProLite T1731SAW ..............31
DIMENSIONS : ProLite T1931SR / ProLite T1931SAW ..............31
COMPLIANT TIMING ..................................................................32
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the speci ed power supply. Use of an incorrect voltage will
cause malfunction and may cause re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
This product is not speci cally designed for 24/7 usage in all environments.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE

When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.

You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
SPECIAL NOTES ON LCD MONITORS
WARNING
NOTE
CLEANING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.

To protect the Touch screen surface, do not scratch or rub the screen with a hard
object.

Never use any of the following strong solvents. These will damage the cabinet and
the Touch screen surface.
Abrasive cleaner Wax Solvent

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
TOUCH
SCREEN
Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
NOTE

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CUSTOMER SERVICE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1024 × 768 :
ProLite T1531SR / ProLit T1531SAW / ProLite T1532SR
Supports Resolutions up to 1280 × 1024 :
ProLite T1731SR / ProLite T1731SAW / ProLite T1931SR / ProLite T1931SAW
High Contrast 500:1 (Typical) / Brightness 200cd/m
2
(Typical: with Touch panel)
: ProLite T1531SR / ProLite T1532SR
High Contrast 500:1 (Typical) / Brightness 230cd/m
2
(Typical: with Touch panel)
: ProLit T1531SAW
High Contrast 700:1 (Typical) / Brightness 300cd/m
2
(Typical: with Touch panel)
: ProLite T1531SR-B3 / ProLite T1531SR-W3 / ProLite T1532SR-B3 / ProLite
T1532SR-W3
High Contrast 700:1 (Typical) / Brightness 340cd/m
2
(Typical: with Touch panel)
: ProLit T1531SAW-B3 / ProLit T1531SAW-W3
High Contrast 1000:1 (Typical) / Brightness 200cd/m
2
(Typical: with Touch
panel) : ProLite T1731SR / ProLite T1931SR
High Contrast 1000:1 (Typical) / Brightness 230cd/m
2
(Typical: with Touch
panel) : ProLite T1731SAW / ProLite T1931SAW
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers

Plug & Play VESA DDC2B Compliant
Windows
®
XP/Vista/7/8/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
IP54 Standard Compliant (Only front face)
Windows 8 / 8.1 / 10 touch environment
Basic touch operations can be performed under Windows 8 / 8.1 / 10.
However, please be informed that full touch functionality and normal operational performance are
not guaranteed.
When upgraded from Windows 8 / 8.1 to Windows 10
You need to start a dedicated software.
Please contact your dealer or iiyama service center.
When used from Windows 10
Please install a driver same as Windows 7 from attached Touch Panel Driver Disk.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama of ce.
*
1
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
*
2
This CD-ROM contains the touch screen driver software.
Install the Touch Panel Driver Disk after connecting the computer to the monitor with
RS-232C Cable or USB Cable. For the details, see Readme le in the Touch Panel
Driver Disk.
Power Cable*
1

VGA(D-sub) Signal Cable
DVI-D Cable

RS-232C Cable

USB Cable

Audio Cable

Screw (M3x6mm)

Touch Panel Driver Disk (CD-ROM)*
2
Safety Guide
Quick Start Guide

CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
When you use with the wall mounting, in
consideration of thickness of the mounting stage,
tighten the M4 Screw with washer which “L” length
is 8mm to fasten the monitor. Using the screw
longer than this may cause electric shock or
damage because it may contact with the electrical
parts inside the monitor.
WALL MOUNTING
Screw
Chassis
Mounting Stage
L
WARNING
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend to use a plastic stylus (tip R0.8 or over) or nger.
SPECIAL NOTES ON TOUCH PANEL
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
speci cation.
BUILT-IN EQUIPMENT
WARNING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS
Menu Button ( )
Scroll Up / Brightness Button ( )
Scroll Down / Mute Button ( )
Select / Auto Button ( )
Power Switch ( )
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Speakers
USB Connector
RS-232C Connector
Audio Connector
VGA(D-sub) mini 15pin Connector
DVI-D 24pin Connector
AC Connector
NOTE
<Front> <Back>
[Fitting and Removal of Cable Cover]
Removal
Press and hold of the Cable Cover and
remove the Cable Cover.
Fitting
Place the Cable Cover.
Fix the Monitor with the Cable Cover
by the screw rmly.
Cable Cover
Screw (accessory)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the RS-232C Cable or the USB Cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor rst and then to the power supply.
Turn on your monitor and computer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama of ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama of ce for a suitable adaptor.
Make sure you tighten the nger screws at each end of the Signal Cable and the RS-
232C Cable.
Don't connect the RS-232C cable and the USB cable to the computer at the same time.
And cannot use those at the same time.
[Example of Connection]
Power Cable (Accessory)
Audio Cable (Accessory)
RS-232C Cable (Accessory)
Computer
VGA(D-sub) Signal Cable
(Accessory)
DVI-D Signal Cable (Accessory)
USB Cable (Accessory)
Cable Holder
Cable Holes
[Collect Cables]
Put the cables through the cable holder and holes.
Collect cables at the back of the stand.
NOTE
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 32: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com

For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer rst for advice.
COMPUTER SETTING
NOTE
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full
face of the monitor.
Hold the panel so that the monitor does not topple when
you change the monitor’s angle.
You are able to adjust the monitor’s angle up to 90
degrees upward, 5 degrees downward.
Do not touch the LCD screen when you change
the angle. It may cause damage or break the
LCD screen.
Careful attention is required not to catch your
ngers or hands when you change the angle.
Procedure for turning ON the Power Switch
Turn ON the monitor rst, and then the computer.

Touch screen driver software
Touch screen driver software and system may not start when you start your computer while
touching the screen.
Touch screen driver software may not run due to the power saving function depending on the
BIOS of your computer. In this case, set the power saving function to off.
90°
NOTE
ENGLISH
OPERATING THE MONITOR 9
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory
with the
COMPLIANT TIMING shown on page 32. You are also able to adjust the picture by following
the button operation shown below. For more detailed adjustments, see page 15 for SCREEN
ADJUSTMENTS.
Press the Button to start the On Screen Display feature. There are additional Menu
items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Use the Buttons to highlight the desired adjustment icon.
Use the / Buttons to make the appropriate adjustment or setting.
Press the Button to leave the menu, and the settings you just made would be
automatically saved.

When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD TIMEOUT has passed.

button can be used to return previous menu item.

Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.

Adjustments for H/V-POSITION, H-SIZE and FINE are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of . Then, select V-POSITION
by using the Buttons.
Use the / Buttons to change the vertical position settings. The vertical position of the overall
display should be changing accordingly while you are doing this.
Press the Button lastly, it ends, any changes are saved in the memory.
CONTRAST
BRIGHTNESS
1280x1024
FH: 63KHz FV: 59.9Hz
AUTO ADJUST
H-POSITION
V-POSITION
H-SIZE
FINE
100
ENGLISH
10 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
BRIGHTNESS *
CONTRAST
Too dull
Too intense
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

BRIGHTNESS: Press the Button when the Menu is not displayed.
Direct
CONTRAST
BRIGHTNESS
1280x1024
FH: 63KHz FV: 59.9Hz
Adjustment Item Problem / Option
OSD
POWER
UNLOCK
LOCK
The POWER SWITCH is Locked.
The POWER SWITCH is Unlocked.
UNLOCK
LOCK
The OSD menu is Locked.
The OSD menu is Unlocked.

TOUCH FUNCTION DISABLE:
ON: Pressing and holding of the Button and the Button at the same time when the Menu is
not displayed, massage "TOUCH DISABLE" will appear on the top right corner.
OFF: Pressing and holding of the Button and the Button at the same time for about 5
seconds when the Menu is not displayed, till "TOUCH DISABLE" disappears.
Direct

LOCK MODE:
Simultaneously press the
button and the button when an image is displayed through VGA or
DVI.
* The OSD menu is not displayed when the OSD is locked. Press the
button and the button
simultaneously again.
The following OSD menu is displayed.
ENGLISH
OPERATING THE MONITOR 11
Adjustment Item Problem / Option Button to Press
FINE *
2
H-SIZE *
2
Too left
Too right
Too low
Too high
H-POSITION
V-POSITION
Too narrow
Too wide
To correct ickering text or lines
AUTO ADJUST *
1
Adjust H/V-POSITION, H-SIZE and FINE automatically.
*
1
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for
SCREEN ADJUSTMENTS.
*
2
See page 15 for SCREEN ADJUSTMENTS.
Only Analog Input
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

AUTO ADJUST: Press the Button when the Menu is not displayed.
Direct
AUTO ADJUST
H-POSITION
V-POSITION
H-SIZE
FINE
ENGLISH
12 OPERATING THE MONITOR
OSD H-POSITION
OSD V-POSITION
OSD TIMEOUT
RESET
INPUT SELECT
OSD TIMEOUT
OSD H-POSITION
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Adjustment Item Problem / Option Button to Press
OSD V-POSITION
RESET Factory-preset data is restored.
INPUT SELECT
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is xed, not selected automatically when VGA and DVI which are selected.
Select the analog input.
Select the digital input.
VGA
DVI
NOTE
Search for an available input source and select
automatically.
Auto
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

INPUT SELECT: Pressing and holding of the
Button for about 5 seconds when the Menu
is not displayed. When both VGA and DVI signal inputs are connected to a
signal source, you can switch between them by successively pressing the
Button.
Direct
ENGLISH
OPERATING THE MONITOR 13
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
Adjustment Item Problem / Option Button to Press
OSD LANGUAGE
ENGLISH
DEUTSCH
English
German
FRANÇAIS French
Japanese
ITALIANO Italian
Simpli ed Chinese
ESPAÑOL Spanish
Traditional Chinese
9300
6500
5500
7500
USER
RED
GREEN
BLUE
94
90
100
Adjustment Item Problem / Option Button to Press
Greenish white
Yellowish white
GREEN
RED
Too weak
Too strong
User
Reddish white
Bluish white9300
COLOR TEMP.
5500
6500
7500
BLUE
ENGLISH
14 OPERATING THE MONITOR
VOLUME
MUTE OFF
Adjustment Item Problem / Option Button to Press
VOLUME
Too soft
Too loud
MUTE
OFF
ON
Turn off the sound temporarily.
Return the sound volume to the previous level.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

MUTE : Press the Button when the Menu is not displayed.
: MUTE ON
: MUTE OFF
Direct
ENGLISH
OPERATING THE MONITOR 15
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
icker or blur for the particular computer in use.
ProLite T1531 and ProLite T1532 series are designed to provide the best performance at resolution
of 1024 × 768, but can not provide the best at resolutions of less than 1024 × 768 because the
picture is automatically stretched to t the full screen. It is recommended to operate at resolution of
1024 × 768 in normal use.
ProLite T1731 and ProLite T1931 series are designed to provide the best performance at resolution
of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024 because the
picture is automatically stretched to t the full screen. It is recommended to operate at resolution of
1280 × 1024 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for H/V-POSITION,
H-SIZE and FINE. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a icker or blur, or the picture does not t in the display area after performing
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows
®
OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box. If you use Microsoft
®
PLUS! 95/98 cancel the
setting of “Stretch desktop wallpaper to t the screen”.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
16 OPERATING THE MONITOR
1) Adjust the H-POSITION so that the left side of the picture frame will move to the left
edge of the display area.
When the left side of the picture frame moves apart from the left edge of the display
area during the H-SIZE adjustment, adjust steps 1) and 2).
Another way to make the H-SIZE adjustment is to correct the vertical wavy lines in
the zebra pattern.
The picture may icker during the H-SIZE, H/V-POSITION adjustment.
In case the picture frame is bigger or smaller than the data display area after the
H-SIZE adjustment, repeat steps from
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the H-SIZE.
Press the
Button. (AUTO ADJUST)
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the
display area.
NOTE
ENGLISH
OPERATING THE MONITOR 17
In case the strong icker or blurs remain on a part of the screen, repeat steps
and because the H-SIZE may not be adjusted correctly. If the icker or blurs still
remain, set the refresh rate of computer to low (60Hz) and repeat steps from
again.
Adjust the H-POSITION after the FINE adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the H-SIZE
and FINE adjustments.
Put back your favorite wallpaper.
Adjust the FINE to correct horizontal wavy noise, icker or blur in the zebra pattern.
NOTE
ENGLISH
18 OPERATING THE MONITOR

Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.

It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE

Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less than
2W or 3W.* The screen becomes dark. From Power Management Mode, the image reappears in
several seconds when either the keyboard or the mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is con gured by the operating system. Check your operating
system manual for information on how this can be con gured.
0 2W or 3W* 100%
POWER
CONSUMPTION
NORMAL MODE
POWER MANAGEMENT MODE
* ProLite T1531SR / ProLite T1731SR / ProLite T1931SR / ProLite T1532SR
2W
ProLite T1531SAW / ProLite T1731SAW / ProLite T1931SAW
3W
ENGLISH
TROUBLE SHOOTING 19
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
The screen is not
synchronized.

The Signal Cable is properly connected.

The signal timing of the computer is within the speci cation of the monitor.

The video output level of the computer is within the speci cation of the monitor.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
The picture does
not appear.

The Power Cable is rmly seated in the socket.

The Power Switch is turned ON.

The AC socket is live. Please check with another piece of equipment.

If the blank screen saver is in active mode, touch the keyboard or the mouse.

Increase the Contrast and/or Brightness.

The computer is ON.

The Signal Cable is properly connected.

The signal timing of the computer is within the speci cation of the monitor.

If the monitor is in power management mode, touch the keyboard or the mouse.
The screen
position is not in
the center.

The signal timing of the computer is within the speci cation of the monitor.
The screen is too
bright or too dark.
The screen is
shaking.

The video output level of the computer is within the speci cation of the monitor.

The power voltage is within the speci cation of the monitor.

The signal timing of the computer is within the speci cation of the monitor.
No sound.

The audio equipment (computer etc.) is ON.

The Audio Cable is properly connected.

The Volume is turned up.

The Mute is OFF.

The audio output level of the audio equipment is within the speci cation
of the monitor.
The sound is too
loud or too quiet.

The audio output level of the audio equipment is within the speci cation
of the monitor.
A strange noise is
heard.

The Audio Cable is properly connected.
The touch
screen shows no
response.

The RS-232C Cable or the USB Cable is rmly seated in the socket.

Touch screen driver software is installed.
The touch
position does not
deviate.

The calibration function set up correctly.
ENGLISH
20 RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
ENGLISH
APPENDIX 21
SPECIFICATIONS : ProLite T1531SR
APPENDIX
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
20W typical
Power Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 140 degrees, Vertical: 125 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
250cd/m
2
(Typical: without Touch panel),
200cd/m
2
(Typical: with Touch panel)
500 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10 to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Resistive-Film
Surface processing
Light transmission
Anti-glare treatment
80%
Communication
system
USB serial transfer or RS-232C serial transfer
Model Name
ProLite T1531SR-B1 / ProLite T1531SR-W1
ProLite T1531SR-B1 A / ProLite T1531SR-W1 A
Power management mode: 2W maximum
16W typical
ENGLISH
22 APPENDIX
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
16.2M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
16W typical
Power Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
370cd/m
2
(Typical: without Touch panel),
300cd/m
2
(Typical: with Touch panel)
700 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10 to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Resistive-Film
Surface processing
Light transmission
Anti-glare treatment
80%
Communication
system
USB serial transfer or RS-232C serial transfer
Model Name ProLite T1531SR-B3 / ProLite T1531SR-W3
Power management mode: 2W maximum
ENGLISH
APPENDIX 23
SPECIFICATIONS : ProLite T1531SAW
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 140 degrees, Vertical: 125 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
500 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10 to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Surface acoustic wave
Anti-glare treatment
92%
20W typical
250cd/m
2
(Typical: without Touch panel),
230cd/m
2
(Typical: with Touch panel)
Model Name
ProLite T1531SAW-B1 / ProLite T1531SAW-W1
ProLite T1531SAW-B1 A / ProLite T1531SAW-W1 A
Power management mode: 3W maximum
16W typical
ENGLISH
24 APPENDIX
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
16.2M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
700 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10 to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Surface acoustic wave
Anti-glare treatment
92%
16W typical
370cd/m
2
(Typical: without Touch panel),
340cd/m
2
(Typical: with Touch panel)
Model Name ProLite T1531SAW-B3 / ProLite T1531SAW-W3
Power management mode: 3W maximum
ENGLISH
APPENDIX 25
SPECIFICATIONS : ProLite T1532SR
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
20W typicalPower Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 140 degrees, Vertical: 125 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
250cd/m
2
(Typical: without Touch panel),
200cd/m
2
(Typical: with Touch panel)
500 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Resistive-Film
Anti-glare treatment
80%
Model Name
ProLite T1532SR-B1 / ProLite T1532SR-W1
ProLite T1532SR-B1 A / ProLite T1532SR-W1 A
Power management mode: 2W maximum
16W typical
ENGLISH
26 APPENDIX
LCD Panel Driving system
a-Si TFT Active Matrix
0.297mm H × 0.297mm V
Response time
Pixel pitch
8ms (Black, White, Black Typical)
Display Colors
16.2M
Sync Frequency
Horizontal: 31.5-60.2kHz, Vertical: 56-75Hz
Maximum Resolution
1024 × 768, 0.8 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
16W typicalPower Consumption*
1
Dimensions / Net Weight 351.0 × 306.0 × 201.0mm / 13.8 × 12.0 × 7.9" (W×H×D)
4.8kg / 10.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 304.0mm W × 228.0mm H / 12.0" W × 9.0" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
370cd/m
2
(Typical: without Touch panel),
300cd/m
2
(Typical: with Touch panel)
700 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
15"
Diagonal: 15" (38cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Resistive-Film
Anti-glare treatment
80%
Model Name ProLite T1532SR-B3 / ProLite T1532SR-W3
Power management mode: 2W maximum
ENGLISH
APPENDIX 27
SPECIFICATIONS : ProLite T1731SR
LCD Panel Driving system
a-Si TFT Active Matrix
0.264mm H × 0.264mm V
Response time
Pixel pitch
5ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-80.0kHz, Vertical: 56-75Hz
Maximum Resolution
1280 × 1024, 1.3 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 387.0 × 342.0 × 201.0mm / 15.2 × 13.5 × 7.9" (W×H×D)
5.8kg / 12.8lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 338.0mm W × 270.0mm H / 13.3" W × 10.6" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
17"
Diagonal: 17" (43cm)Size
Technology
Touch
Screen
Resistive-Film
Surface processing
Light transmission
Anti-glare treatment
80%
Communication
system
USB serial transfer or RS-232C serial transfer
20W typical, Power management mode: 2W maximum
250cd/m
2
(Typical: without Touch panel),
200cd/m
2
(Typical: with Touch panel)
ENGLISH
28 APPENDIX
SPECIFICATIONS : ProLite T1731SAW
LCD Panel Driving system
a-Si TFT Active Matrix
0.264mm H × 0.264mm V
Response time
Pixel pitch
5ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-80.0kHz, Vertical: 56-75Hz
Maximum Resolution
1280 × 1024, 1.3 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 387.0 × 342.0 × 201.0mm / 15.2 × 13.5 × 7.9" (W×H×D)
5.8kg / 12.8lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 338.0mm W × 270.0mm H / 13.3" W × 10.6" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
17"
Diagonal: 17" (43cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Surface acoustic wave
Anti-glare treatment
92%
20W typical, Power management mode: 3W maximum
250cd/m
2
(Typical: without Touch panel),
230cd/m
2
(Typical: with Touch panel)
ENGLISH
APPENDIX 29
SPECIFICATIONS : ProLite T1931SR
LCD Panel Driving system
a-Si TFT Active Matrix
0.294mm H × 0.294mm V
Response time
Pixel pitch
5ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-80.0kHz, Vertical: 56-75Hz
Maximum Resolution
1280 × 1024, 1.3 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play
VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 432.0 × 390.0 × 218.0mm / 17.0 × 15.4 × 8.6" (W×H×D)
6.6kg / 14.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 376.0mm W × 301.0mm H / 14.8" W × 11.9" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, VCCI, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
19"
Diagonal: 19" (48cm)Size
Technology
Touch
Screen
Resistive-Film
Surface processing
Light transmission
Anti-glare treatment
80%
Communication
system
USB serial transfer or RS-232C serial transfer
20W typical, Power management mode: 2W maximum
250cd/m
2
(Typical: without Touch panel),
200cd/m
2
(Typical: with Touch panel)
ENGLISH
30 APPENDIX
SPECIFICATIONS : ProLite T1931SAW
LCD Panel Driving system
a-Si TFT Active Matrix
0.294mm H × 0.294mm V
Response time
Pixel pitch
5ms (Black, White, Black Typical)
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.5-80.0kHz, Vertical: 56-75Hz
Maximum Resolution
1280 × 1024, 1.3 MegaPixels
Input Connector
VGA(D-sub) mini 15 pin, DVI-D 24 pin
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play VESA DDC2B
TM
Power Consumption*
1
Dimensions / Net Weight 432.0 × 390.0 × 218.0mm / 17.0 × 15.4 × 8.6" (W×H×D)
6.6kg / 14.6lbs
Upward: 90 degrees Downward: 5 degrees
Viewable angle
Horizontal : 170 degrees, Vertical: 160 degrees (Typical)
Maximum Screen Size 376.0mm W × 301.0mm H / 14.8" W × 11.9" H
Power Source 100-240VAC, 50/60Hz, 1A
Environmental
Considerations
Approvals
CB, CE, TÜV-Bauart, CU, cULus, IP54*
2
Tilt Angle
*
1
USB peripherals / Audio equipment are not connected.
*
2
IP54 Standard Compliant : Only front face
NOTE
Brightness
Contrast ratio
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75

Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Video Signal
Input Audio Signal 0.5Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating: Temperature
Humidity
Storage:
-20 to 60°C / -4 to 140°F
Humidity
0 to 40°C / 32 to 104°F
10
to 90% (No condensation)
20 to 80% (No condensation)
Temperature
Size Category
19"
Diagonal: 19" (48cm)Size
Technology
Touch
Screen
Surface processing
Light transmission
Communication
system
USB serial transfer or RS-232C serial transfer
Surface acoustic wave
Anti-glare treatment
92%
20W typical, Power management mode: 3W maximum
250cd/m
2
(Typical: without Touch panel),
230cd/m
2
(Typical: with Touch panel)
ENGLISH
APPENDIX 31
DIMENSIONS : ProLite T1531SR
/ ProLite T1531SAW / ProLite T1532SR
DIMENSIONS : ProLite T1731SR / ProLite T1731SAW
DIMENSIONS : ProLite T1931SR / ProLite T1931SAW
342.0mm/13.5"
59.0mm/2.3"
201.0mm/7.9"
222.5mm/8.8"
320.0mm/12.6"
272.0mm/10.7"
340.0mm/13.4"
387.0mm/15.2"
201.0mm/7.9"
275.0mm/10.8"
306.0mm/12.0"
59.0mm/2.3"
222.5mm/8.8"
306.0mm/12.0"
351.0mm/13.8"
230.0mm/9.1"
59.0mm/2.3"
390.0mm/15.4"
303.0mm/11.9"
358.0mm/14.1"
218.0mm/8.6"
249.5mm/9.8"
378.0mm/14.9"
432.0mm/17.0"
ENGLISH
32 APPENDIX
M059V02
COMPLIANT TIMING
Dot Clock
25.175MHz
31.500MHz
31.500MHz
36.000MHz
40.000MHz
49.500MHz
50.000MHz
65.000MHz
75.000MHz
78.750MHz
108.000MHz
135.000MHz
Vertical
Frequency
59.940Hz
75.000Hz
72.809Hz
56.250Hz
60.317Hz
75.000Hz
72.188Hz
60.004Hz
70.069Hz
75.029Hz
60.020Hz
75.025Hz
VESA
SVGA
VGA
XGA 1024 × 768
640 × 480
800 × 600
Horizontal
Frequency
31.469kHz
37.500kHz
37.861kHz
35.156kHz
37.879kHz
46.875kHz
48.077kHz
48.363kHz
56.476kHz
60.023kHz
63.981kHz
79.976kHz
Video Mode
SXGA
1280 × 1024
*
Not compliant to ProLite T1531SR / ProLite T1531SAW / ProLite T1532SR.
NOTE
*
*
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iiyama prolite t1731sr 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iiyama prolite t1731sr 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Iiyama prolite t1731sr 1

Iiyama prolite t1731sr 1 Gebruiksaanwijzing - Nederlands - 31 pagina's

Iiyama prolite t1731sr 1 Gebruiksaanwijzing - Deutsch - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info