663942

Iiyama TE6568MIS Handleiding

41
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 1995/5/EC “R&TTE Directive” and 2011/65/EU
“RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL6568
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE MONITOR ..........................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
UNPACKING ...................................................................................7
SPECIAL NOTES ON .....................................................................7
CONTROLS AND CONNECTORS : MONITOR ..............................8
INSTALLATION .............................................................................10
CONTROLS AND CONNECTORS : REMOTE CONTROL ...........12
PREPARING THE REMOTE CONTROL.......................................13
BASIC OPERATION ......................................................................14
CONNECTING YOUR MONITOR .................................................17
COMPUTER SETTING .................................................................20
OPERATING THE MONITOR .............................................................22
ADJUSTMENT MENU CONTENTS ..............................................24
SCREEN ADJUSTMENTS ............................................................36
POWER MANAGEMENT FEATURE .............................................39
TROUBLE SHOOTING ......................................................................40
RECYCLING INFORMATION .............................................................41
APPENDIX ........................................................................................42
SPECIFICATIONS : ProLite TE6568MIS-B1AG ............................42
DIMENSIONS ................................................................................ 43
COMPLIANT TIMING ....................................................................44
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinetwillbeblockedandthemonitormayoverheatifthestandisremoved.Thismaycausere
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3

The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
-WhenyourstturnontheLCDmonitor,thepicturemaynottinthedisplayarea
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
-Youmayndslightlyunevenbrightnessonthescreendependingonthedesktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screenisrecoveredslowlybychangingtheimageorturningothePowerSwitchfor
hours.
SPECIAL NOTES ON LCD MONITORS

This LCD cannot be used outdoors.

This LCD cannot be used with the screen facing upwards.

If you use a cable longer than the supplied one, the picture quality is not guaranteed. Touch
function can be disrupted if the USB cable length exceeds 3m.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 24hours per day.
The display is compatible for usage in Landscape applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturnothemonitorfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturnothemonitorwhennot
in use to assist the prevention.
OtherwaystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC DISPLAY

Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.

Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turnomonitorwhennotinuse,eitherbyremotecontrolorusePowerManagementorSchedule
functions.
3.Whenmonitorisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
4. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
5. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION

Forsafety reasons,turno thepowerswitch andunplugthe monitorbeforeyou
clean it.
NOTE

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
*
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
Power Cable*

VGA Cable
HDMI Cable
DisplayPort Cable
USB Cable
Remote Control
Battery(2pcs)
TouchPen(3pcs)
iiyama Logo Sticker
Cableties(Forcablemanagement,6pcs)
EU Energy Label
POP Label
Safety Guide
Quick Start Guide

BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 3840 × 2160
High Contrast 1200:1 (Typical: without glass) / Brightness 350cd/m
2
(Typical:
without glass)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 12W(Typical)/16W(Maximum) Stereo Speakers

Plug & Play VESA DDC2B Compliant
Windows
®
XP/Vista/7/8/8,1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (600mm×400mm) Compliant
Glass with AG coating
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
UNPACKING
CAUTION
Moving the monitor requires at least two people. If not, it may drop and could result in a serious
injury.
SPECIAL NOTES ON
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
Werecommendyouuseaplasticstylus(tipR0.8orover)ornger.
CAUTION
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : MONITOR
<Front>
POWER
INDICATOR
Power Button
Blue Normal Operation
Red
& Blue
Press at least 2 seconds to enter Power Management
mode.
Flash : Power Management
Other:ScreenOfunctionison.IRsignalisreceived.
Red
PowerO
HOME Back to main interface.
RETURN
Returns to a previous menu or closes the OSD Menu.
MENU Menu Button
Volume - Button
Volume + Button
Remote Sensor Remote Sensor
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
<Back>
HDMI OUT HDMI HDMI Connector
USB2.0 USB2.0 USB Connector
HDMI1IN(2.0)
HDMI2IN(1.4a)
HDMI3IN(1.4a)
HDMI HDMI Connector
TOUCH1(forHDMI1/HDMI2)
TOUCH2 (forHDMI3/DP/
VGA)
USB Touch USB Connector
DP IN DisplayPort DisplayPort Connector
AUDIO IN Mini Jack Audio Connector
VGA IN VGA VGA Connector
USB3.0 USB3.0 USB Connector
AV IN Mini Jack Video Connector
SPDIF OUTPUT
SPDIF SPDIF Connector
RS232C RS232C 9pin RS232C Connector
AUDIO OUT Mini Jack Headphone Connector
LAN RJ45
RJ45Connector(Thisnetworkportis
onlyusedforAndroidsystem)
AC SWITCH (ON)/ (OFF)
MAIN POWER Main Power Switch
AC IN AC-INLET
ACConnector(
:Alternatingcurrent)
(AC-IN)
SPEAKERS Speakers
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualiedservicepersonnel.
Moving the monitor requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
display and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M8 Screw with washer which “L” length is 25mm to fasten the monitor. Using a screw
longer than this may cause electric shock or damage because it may contact with the electrical parts
inside the monitor.
CAUTION
Screw
Chassis
Mounting Stage
L
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
[INSTALLATION NOTE]
The touch kit of this monitor is an optical device that utilizes infrared light source and sensitive
sensors for touch detection.
Notice the incident light that contains large quantities of infrared light may affect touch screen
operation and performance.
Please install it with care as follows to ensure reliable touch performance.
Intense light / Specular light / Focus spotlight / Wide spread light / Direct sunlight / Indirect sunlight
from the window and/or the glass door. / Not install the touch monitor right under the light source.
Direct
Sunlight
Windows
Light
source
Light source
Light source
Front Front
Side
Side
[ROTATING THE DISPLAY]
A
A
Not Available
It is designed to be compatible in landscape mode.
A
A
Landscape
Available
Remote Sensor
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : REMOTE CONTROL
Turns the monitor ON and OFF.
Not available on this model.
Display
Provides source and resolution
information.
Home Android system main screen button.
Input Selects the source.
Green Lock and unlock Buttons function.
Red
Lock and unlock Buttons and Touch
function.
ScreenO TurnsthebacklightOnandO.
Navigates through submenus and
settings.
: Up Button
: Down Button
: Left Button
: Right Button
Enter
Conrmsyourselectionorsave
changes.
Quickly start “Writing Software”.
PgUp / PgDn
WhenselectFile:Therst/Last
When Internet browser: Scroll Up /
Scroll Down
Turnsonorothemutefunction
when the Menu is not displayed.
MENU
Displays the “Screen Setting“ menu
when the Android system is not
displayed.
Blue Freeze the picture.
Backspace
Back
Returns to a previous menu or closes
the OSD Menu.
VOL+ / VOL-
VOL-: Decreases the sound volume.
VOL+: Increases the sound volume.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
DonotuseanyotherbatteriesotherthanthosespeciedinthismanualfortheRemoteControl.Do
not insert old and new batteries together in the Remote Control. Make sure that the terminals match
the "+" and "-" indications in the battery compartment. Burst batteries or the electrolyte from these
batteriesmaycausestains,reorinjury.
Open back cover of battery component on the back of remote control.
AlignandinserttwoAAAbatteriesaccordingtotheirplusandminusports(asindicatedinthe
remotecontrol).
After battery is installed, close the back cover of battery components, and make the following clip
buckled to the bottom.
NOTE
Replace with new batteries when the Remote Control does not work close to the
monitor. Use AAA dry batteries.
Operate the Remote Control by pointing it toward the Remote Sensor on the monitor.
Other manufacturers remote control will not work with this monitor. Use the provided
Remote Control ONLY.
Usedbatteriesneededtofollowthelocalrulestobediscarded.(Suggestion:todispose
ofusedbatteriespleasefollowcorrectpolicyasperyourlocalregulations.)
Battery x 2
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
BASIC OPERATION
Turning the monitor ON
The monitor is turned On and the Power Indicator turns to Blue when you press the POWER
ButtononthemonitorortheRemoteControl.ThemonitoristurnedOandthePowerIndicator
turns to Red when you press the POWER Button on the monitor or the Remote Control. Press
again to turn On the monitor.
NOTE
Even when using the power management mode or turning OFF the Power Switch, the monitor
will consume a small amount of electricity. Disconnect the Power Cable from the power supply
whenever the monitor is not in use or during the night, to avoid unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the MENU Button on the monitor or
the Menu Button on the Remote Control.
The menu page disappears when you press the Return Button on the monitor or the Back
Button on the Remote Control.
[Monitor]
[Remote Control][Monitor]
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing the / Button on the remote
control while the menu page is displayed on the screen.
Move the cursor vertically
Select adjustment by pressing the / Button on the remote control while the menu page is
displayed on the screen.
[Remote Control]
[Remote Control]
ENGLISH
16 BEFORE YOU OPERATE THE MONITOR
Adjust the volume of sound
Press the / Button on the monitor or the VOL- / VOL+ Button on the remote control to
adjust the volume of sound when the menu page is not displayed on the screen.
Switch the input signal
The Input setting menu appears on the screen when you press the Input button on the remote
control.
[Remote Control][Monitor]
[Remote Control]
ENGLISH
BEFORE YOU OPERATE THE MONITOR 17
CONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the Touch USB Cable.
ConnectthePowerCabletothemonitorrstandthentothepowersupply.
Turnonyourmonitor(MainPowerSwitchandPowerSwitch)andcomputer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
When Touch USB cable connected than wait for 5 seconds and the touch function is
readytogo.Itcanbeactivatedbypen,ngeroranyotherpointer.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment
VGA Cable (Accessory)
HDMI Cable (Accessory)
Power Cable
(Accessory)
Touch USB Cable
(Accessory)
Audio Cable (Not Included)
DisplayPort Cable (Accessory)
ENGLISH
18 BEFORE YOU OPERATE THE MONITOR
[ Connection example with the peripheral device ]
CAUTION
Turnothepowerswitchandunplugthemonitorandperipheralsbeforeconnectiontoavoidelectric
shock or damage.
NOTE
Refer to the user manual of peripherals at the same time.
Ensure you have the necessary cables as required.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 19
[ About the daisy chain ]
[HDMI IN]
[HDMI]
MONITOR1 MONITOR2
[HDMI]
[HDMI OUT] [HDMI IN]
Digital video connection
HDMI
ENGLISH
20 BEFORE YOU OPERATE THE MONITOR
Procedure for turning ON the Power Switch
TurnONthemonitorrst,andthenthecomputer.
Signal Timing
Change to the desired signal timing listed on page 44: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows /XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com

For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems.Forfurtherinformation,pleasecontactyourcomputerdealerrstforadvice.
COMPUTER SETTING
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 21

MULTI-TOUCH :
ThismonitorcomplieswithDDC2BofVESAstandard.(Plug&playcompliant)
The MULTI-TOUCH function runs on Windows7/8/8.1/10 by connecting the monitor to DDC2B
compliant computer with the USB cable supplied.

TOUCH support operation system :
MicrosoftWindows2000(64bitand32bit)
MicrosoftWindowsXP(64bitand32bit)
MicrosoftWindowsVista(64bitand32bit)
MicrosoftWindows7(64bitand32bit)
MicrosoftWindows8/8.1/10(64bitand32bit)
Mac OS X V10.6.4 & higher HID for single touch only
Linux 3.0 & higher need patch for multi-touch
3.5 & higher HID for multi-touch
Not support Windows earlier versions.
Windows
7*
5
,8/8.1*
6
,10*
6,7,8
Windows7*
4
Vista XP 2000 Mac OSX Linux
Default mouse*
1
Touch digitizer*
2
Windows gestures*
3
*
1
Defaultmouse(click,drag,double-clickandright-click)
*
2
Touchdigitizer(click,drag/selection,double-click,right-click,ickandvisualfeedback)
*
3
Digitizer with Windows7/8/8.1/10 multi-touch gestures
*
4
Windows 7 - Starter and Home Basic version
*
5
Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions
*
6
Windows 8/8.1/10 need non-OEM version for multi-touch support
*
7
Windows10 - Home, Pro, Enterprise and Education
Not supported for Mobile, Mobile Enterprise, IoT Core.
*
8
Windows10 - Touch do no support for “touchpad gestures”. Touchpad gesture is for touchpad on
notebook.
ENGLISH
22 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 44. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 36 for SCREEN ADJUSTMENTS.
Take middle point position on the buttom of display screen as starting point, use the
touch pen to drag towards screen center position to call up touch menu, as show
below. Or press Input button on the remote control.
Start the On Screen Display feature. "General setting" is displayed. Then, press the
menu button on the remote control or click
on General setting menu with touch
pen. There are additional Menu items which can be switched by using the
/
Buttons on the remote control or with the touch pen.
Select the Menu item of the adjustment you want to make. Use the
/ Buttons on
the remote control or with the touch pen to highlight the desired adjustment item.
Then, press the Enter button on the remote control.
Use the
/ Buttons on the remote control or with the touch pen to make the
appropriate adjustment or setting.
Press the Back Button on the remote control or click blank area outside menu with
the touch pen to exit menu.
For example, to correct for vertical position, select Menu item of "Adjust setting". Select "Verticle
adjust" by using the
/ Buttons on the remote control or with the touch pen.
Use the
/ Buttons on the remote control or with the touch pen to change the vertical
position settings. The vertical position of the overall display should be changing accordingly
while you are doing this.
Press the Back Button on the remote control or click blank area outside menu with the touch
pen, it ends, all changes are saved in the memory.
horizon adjust
verticle adjust
clock adjust
phase adjust
50
50
50
50
Auto
<
Audio
Screen
Display
Adjust
General Setting
ENGLISH
OPERATING THE MONITOR 23

The Back Button on the remote control can be used to return previous menu item.

Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.

Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
NOTE
Direct

Freeze Function:
Press the Blue button when Menu is not displayed.
Repeat successively to activate/deactivate the function.

Backlight Function:
PresstheScreenObuttonwhenMenuisnotdisplayed.
RepeatsuccessivelytoOn/Othefunction.

Input Function:
Press the Input button when Menu is not displayed.

Volume Function:
Press the VOL+/VOL- buttons when Menu is not displayed.

Mute Function:
Press the
button when Menu is not displayed.
RepeatsuccessivelytoOn/Othefunction.

Kiosk Mode Function:
Disable touch functions, buttons, Menu etc.
Press the following buttons when Menu is not displayed.
On : Input
7
9 7 9
O:Input
8 9 8 9
Default Kiosk mode input set to HDMI1, for other input, please use remote controller to change
thedefaultsettingforthersttime.
Evenwhenthemonitoristurnedoandthepoweristurnedonagain,theKioskmodewhenthe
poweristurnedoiskept.
* Available for Remote Control only.
[LOCK MODE]

Back Controller Button:
Press the Green button when Menu is not displayed, will lock/unlock the Back Controller Button
Lock function.

Back Controller Button & Touch function (3 type methods):

Press the Red button when Menu is not displayed, will lock/unlock the Back Controller Button
Lock function and Touch function.

Press the Input, VOL +, VOL-, VOL + and VOL- button in order.

Press the
, , and button in order when Input menu is displayed.
* Available for Remote Control only.
* Available for Back Controller only.
* Available for Remote Control only.
* Available for Remote Control only.
ENGLISH
24 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
General setting
Input *
iiWare
Select the iiWare input.
HDMI1
Select the HDMI1 input.
HDMI2
Select the HDMI2 input.
HDMI3
Select the HDMI3 input.
DP
Select the DP input.
VGA
Select the VGA input.
AV
Select the AV input.
Brightness Brightness of backlight is reduced.
Direct
Direct
General Setting
Volume
Too soft
Too loud
Direct
*
The switching of the signal input take a few seconds.
ENGLISH
OPERATING THE MONITOR 25
Adjustment Item Problem / Option Button to Press
Treble
Too weak
Too strong
Meeting
Sound quality suitable for the conference.
Audio setting
Volume
Sound Mode
Class
Sound quality suitable for the classroom.
Bass
Too weak
Too strong
Balance
Standard
Custom
Mute
Return the sound volume to the previous level.
Turnothesound.
Custom sound quality.
Standard
Left side speaker louder
Right side speaker louder
Too soft
Too loud
Direct
Direct
30
Volume
5
Bass
5
Treble
0
Balance
Mute
Standard
Meeting Class Custom
<
Audio
Screen
Display
Adjust
ENGLISH
26 OPERATING THE MONITOR
Aspect ratio
PTP *
Display the picture point to point.
16:9
4:3
Displays all picture in 4:3 aspect ratio.
Displays all picture in 16:9 aspect ratio.
Adjustment Item Problem / Option Button to Press
Screen setting
*
Point To Point, to optimize touch performance when 3840 ×2160input.(notavailableunder
Android or not 3840 ×2160inputtiming)
<
Audio
Screen
Display
Adjust
Anti Burn-In
Anti Burn-In
AntiBurn-Inisturnedo.
Anti Burn-In is turned on.
ENGLISH
OPERATING THE MONITOR 27
Adjustment Item Problem / Option Button to Press
Display setting
Color Temp
Standard
Greenish white
Cold
Warm
Reddish white
Bluish white
Too dark
Too bright
Brightness*
1
Contrast
Too dull
Too intense
Sharpness*
2
Too soft
Too sharp
*
1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*
2
Only AV Input.
Standard
Warm
Bright Soft
Custom
Standard
Cold
50
Brightness
50
Contrast
50
Hue
50
Sharpness
<
Audio
Screen
Display
Adjust
Hue*
2
Purplish
Greenish
Custom
Standard
Displays a picture on a screen set by Image
Settings adjustments.
For general windows environment and monitor
default setting.
Picture Mode
Bright
Soft
Enlarge brightness and vivid.
Reduce brightness and soften.
ENGLISH
28 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Adjust setting *
1
Auto *
2
Adjust H/V Position, Clock and Phase automatically.
Return to Menu.
Clock adjust
Too narrow
Too wide
Phase adjust
Tocorrectickeringtextorlines
Horizon adjust
Too far to the left
Too far to the right
Too low
Verticle adjust
Too high
*
1
Only VGA input.
*
2
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 36 for
SCREEN ADJUSTMENTS.
horizon adjust
verticle adjust
clock adjust
phase adjust
50
50
50
50
Auto
<
Audio
Screen
Display
Adjust
ENGLISH
OPERATING THE MONITOR 29
[Application]
Click with the touch pen.
or
Click
with the touch pen. Then, click with the touch pen.
ENGLISH
30 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Settings
Startup
and
shutdown
Boot time /
Otime
Select the time of each, and select day of
the week or everyday or the business days.
Startup and
shutdown
option
Startup
channel
Standbyafterstartup(blackscreen):Turnothebacklight.
PresstheScreenObuttonontheremote
control to return the screen.
Last shutdown channel
Settings
Wireless & networks
Ethernet
More...
SHARE
SAMBA Service
Device
Display
Apps
Personal
Security
Startup and shutdown
Storage
Language & input
Password
Input Setting
Other Setting
Wireless &
networks
Device
Set the wired network.
Network:On/O,LOCALNETWORKSETTING,IPadress,
Default gateway, Netmask, DNS, Proxy
Set the wallpaper that is built into the system, set the External
source display and the Anti Burn-In.
Wallpaper, HDMI Out Encryption setting* : ON/OFF,
Anti Burn-In: Interval 2 / 3 / 5 / 30 / 60 mins
Storage
To display the internal system and USB disk.
Apps
View each application.
Language
& input
Set display language, keyboard and input method.
Language: Deutsch, English, Français, Nederlands, Polski,
Русский,Italiano,Čeština
Defaultstartupchannel(Selectthesource)
Timer
switch
Closepoweroreminder.

To enable the timer switch, click
with the touch pen.

To delete a timer, click
with the touch pen.
NOTE
NOTE
Opening
logo
iiyama Logo displayed when the monitor
is turned on.
Password
Setthescreenlockpassword.(4-digit)
Input setting
Change the Input name to Nickname.
*
If the connected monitor does not support HDCP, images are not displayed if "HDMI Out
Encryption setting"issettoOn.(EDIDcannotberead)
Inthatcase,pleasesetittoO.
Ethernet
SHARE
SAMBA
Service
SAMBA sharing service.
Display
Security
Personal
Credentialstorage(CerticateAuthorities)
ENGLISH
OPERATING THE MONITOR 31
Adjustment Item Problem / Option Button to Press
Settings
Date & time
Set automatic or manually date and time.
About Device
Version information of each software.
System
Floating Style
Setting
Set the shortcut menu.
Available in all channel / Available in iiWare
TouchMenufunctionisturnOn/O.
Floating
Annotation Setting
Floating
Style
Setting
Set the toolbar.
Slide Toolbar / Floating Annotation tool
Other
Setting
Note Writing
Setting
Set the Note Writing Setting.
Singlenger/Multi-nger
Personal
Touch Menu
Settings
Wireless & networks
Ethernet
More...
SHARE
SAMBA Service
Device
Display
Apps
Personal
Security
Startup and shutdown
Storage
Language & input
Password
Input Setting
Other Setting
ENGLISH
32 OPERATING THE MONITOR

Slide toolbar appears
The slide toolbar can be displayed on either left side or right side of the screen.
: Back
: Home
: Recent tasks
: Annotation tools
: Annotate
: Marker
: Take a screenshot
: Close
: Screen Capture
: Freeze the picture.
: Zoom +
: Zoom -
: Return to the original screen size.
: Exit
: Tools
: SpotLight
: CountDown
: StopWatch
:AirClass(WIFITeamwork)
: Voter
: Responder
: Message
: Manager
: Exit
ENGLISH
OPERATING THE MONITOR 33
[Note(Quick Note)]
This is a writing software.
Canwritethecharacters,Linesandpictureslikeawhiteboard.Also,caninsertanimageorle.
Click or with the touch pen.
: Display menu of Note.
: Save the Note writing and open a new Note.
:Openthele.
:Savethecurrentdocumenttoimageformattolebrowser.
: Export and upload the current document to image format to Google Drive.
: Export as IMG/PDF/SVG/IWB.
: Change the color of the background.
: Adjust the brightness.
: Return to main screen.
: Insert the picture.
: Select the object being edit, can move, can zoom.
:Changethewidthandcolorofthestroke.(Pen/Handwritingsize/Handwritingcolor)
:Erasethespeciedobject.
: Clear the page.
: Draw the shape.
:CalloutDrawingboard.(Pen/Palette/Colorpicker/Colordisk)
: Cancel
: Redo
: To the previous page.
: To the next page.
: Thumbnail display
: Add new page after the last page.
ENGLISH
34 OPERATING THE MONITOR
[File Browser (Finder)]
Click or with the touch pen.
BrowsethelesstoredintheinternalstoragedeviceandtheUSBstorage.
Supported Format
Oce:PPT,Word,Excel,PDF(OpenthelebyusingtheWPSOce)
Note:Noteles,screenshot
Video:.avi.asf/.asx.ts.mp4.mkv.mov.rmvb.3gp.mpg/.mpeg.v.m4v
Picture : .jpg .jpeg .png .bmp .gif
Audio:.mp3.wma.aac.ogg.wav.ape.ac
: Search
: Return to the previous.
:Sortmenu(SortsName,Type,Size,Time.)
: Default display
: Detail display
: Deselect
: Select
: Select all
: New folder
: Copy
: Paste
: Cut
: Delete
: Rename
: More
: Exit
ENGLISH
OPERATING THE MONITOR 35
[WPS Oce]
ThisisthesoftwaretousetheleoftheOce.
Double click with the touch pen.
[Web Browser (Browser)]
Connect the network, and browse the web.
Click or with the touch pen.
[Keeper]
This is the software to clean up the running application.
Double click with the touch pen.
One Key Optimize : Memory and Garbage clean
Memory Clean : Clean memory
Garbage Clean : Clean storage
[Cloud Drive]
Connect the network, and the Cloud Drive.
Click with the touch pen.
[ScreenLock]
Lock/unlock touch menu.
Click with the touch pen.
A screen for entering password appears. Enter the preset 4-digit password.
ENGLISH
36 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
The monitor is designed to provide the best performance at resolution of 3840 × 2160, but can not
provide the best at resolutions of less than 3840 × 2160 because the picture is automatically stretched
totthefullscreen.Itisrecommendedtooperateatresolutionof3840×2160innormaluse.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock
Frequency and Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed.Ifthescreenhasaickerorblur,orthepicturedoesnottinthedisplayareaafterperforming
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box. If you use Microsoft
®
PLUS! 95/98 cancel the
settingof“Stretchdesktopwallpapertotthescreen”.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 37
1) Adjust the H-Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringtheClockFrequencyadjustment,adjuststeps1)and2).
Another way to make the Clock Frequency adjustment is to correct the vertical wavy
lines in the zebra pattern.
ThepicturemayickerduringtheClockFrequency,H/V-Positionadjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock Frequency adjustment, repeat steps from
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock Frequency.
Adjust the Auto Adjustment.
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the V-Position so that the top and bottom of the picture frame will t to the display
area.
NOTE
ENGLISH
38 OPERATING THE MONITOR
Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
becausetheClockFrequencymaynotbeadjustedcorrectly.Iftheickerorblursstill
remain,settherefreshrateofcomputertolow(60Hz)andrepeatstepsfrom
again.
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Clock
Frequency and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, icker or blur in the zebra pattern.
NOTE
ENGLISH
OPERATING THE MONITOR 39

Even when using the power management mode, the monitor consumes electricity. Turn
othePowerSwitchwheneverthemonitorisnotinuse,duringthenightandweekends,
to avoid unnecessary power consumption.

It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE

Power Management Mode
Whenthe H-syncsignal/ V-syncsignal /Hand Vsync signalsfromthe computerareo, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark. From Power Management Mode, the image reappears in
several seconds when either the keyboard or the mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function,includinganytimersettingsisconguredbytheoperatingsystem.Checkyouroperating
systemmanualforinformationonhowthiscanbecongured.
00.5 W100%
POWER
CONSUMPTION
Blue
Red
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
40 TROUBLE SHOOTING
The screen is not
synchronized.

The Signal Cable is properly connected.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

Thevideooutputlevelofthecomputeriswithinthespecicationofthemonitor.
The picture does
not appear.

ThePowerCableisrmlyseatedinthesocket.

The Power Switch is turned ON.

The AC socket is live. Please check with another piece of equipment.

If the blank screen saver is in active mode, touch the keyboard or the mouse.

Increase the Contrast and/or Brightness.

The computer is ON.

The Signal Cable is properly connected.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

If the monitor is in power management mode, touch the keyboard or the mouse.
The screen
position is not in
the center.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen is too
bright or too dark.
The screen is
shaking.

Thevideo outputlevel ofthe computeriswithin thespecication ofthe
monitor.

Thepowervoltageiswithinthespecicationofthemonitor.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
No sound.

Theaudioequipment(computeretc.)isON.

The Audio Cable is properly connected.

The Volume is turned up.

The Mute is OFF.

Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The sound is too
loud or too quiet.

Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
A strange noise is
heard.

The Audio Cable is properly connected.
The touch
screen shows no
response.

TheUSBCableisrmlyseatedinthesocket.

Touch screen driver software is installed.
The touch position
does not deviate.

The calibration function set up correctly.
TROUBLE SHOOTING
Problem Check
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ENGLISH
RECYCLING INFORMATION 41
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
ENGLISH
42 APPENDIX
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite TE6568MIS-B1AG
Touch
Screen
Technology IR Touch 20points
Light transmission
88%
Hardness 7H
Thickness 4mm
Communication
system
USB serial transfer
Size Category 65"
LCD
Panel
Panel technology
IPS
Size Diagonal:64.5"(164.0cm)
Pixel pitch 0.372mm H × 0.372mm V
Brightness 350cd/m
2
(Typical:withoutglass),308cd/m
2
(Typical:withglass)
Contrast ratio 1200:1(Typical:withoutglass)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.1.07B
Sync Frequency
VGA: Horizontal: 30.0-80.0kHz, Vertical: 24-30, 55-75Hz
HDMI1: Horizontal: 30.0-135.0kHz, Vertical: 24-30, 55-75Hz
HDMI2/HDMI3: Horizontal: 30.0-80.0kHz, Vertical: 24-30, 55-75Hz
DisplayPort: Horizontal: 30.0-90.0kHz, Vertical: 24-30, 55-75Hz
Native Resolution 3840 × 2160, 8.3 MegaPixels
Supported max. resolution
VGA: 1920 × 1080 60Hz
HDMI1: 3840 × 2160 60Hz
HDMI2/HDMI3: 3840 × 2160 30Hz
DisplayPort: 3840 × 2160 30Hz, 2560 × 1440 60Hz
Input Connector VGA ×1, HDMI ×3, DisplayPort ×1
USB Standard USB2.0 ×2, USB3.0 ×1
Number of USB Ports
Connector shape
1Upstream:SeriesB(fortouch)
3 Downstream : Series A
Input AV Connector Mini jack
Input Audio Connector Mini jack
LAN RJ45
Serial Port RS-232C In
Plug & Play VESA DDC2B
TM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Analog:0.7Vp-p(Standard),75
Ω,
Positive
Digital: HDMI, DisplayPort
Input Audio Signal 0.5Vrms maximum
Output Connector
HDMI
SPDIF out Connector SPDIF
Headphone Connector Mini jack
Speakers Internal:2Typical:12W,Maximum:16W(Stereospeakers)
ENGLISH
APPENDIX 43
DIMENSIONS
1455.0mm/57.3”
1521.5mm/59.9”
448.5mm/17.7”
831.0mm/32.7”
897.5mm/35.3”
993.5mm/39.1”
99.0mm/3.9”
81.5mm/3.2”
61.0mm/2.4”
648.5mm/25.5”
135.5mm/5.3”
600.0mm/23.6”
400.0mm/15.7”
4xM8 SCREW HOLE
(DP=18.5mm～26.0mm)
[RECOMMENDS USING M8x25 SCREWS]
* USB peripherals / Audio equipment are not connected.NOTE
Maximum Screen Size 1428.48mm W × 803.52mm H / 56.2" W × 31.6" H
Power Source 100-240VAC, 50/60Hz, 2.2A
Power Consumption*
205W typical, Power management mode: 0.5W maximum
EnergyEciencyClass:B
Dimensions / Net Weight
1521.5×897.5×99.0mm/59.9×35.3×3.9"(W×H×D)
45.0kg / 99.2lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
85%(Nocondensation)
-20 to 60°C / 4 to 140°F
85%(Nocondensation)
Approvals CB, CE, CU, TÜV-Bauart
ENGLISH
44 APPENDIX
COMPLIANT TIMING
M189A21
* means supported the timing.
Timing
VESA
VGA 640x480 31.5 60.0 25.175
SVGA 800x600 37.9 60.0 40.000
XGA 1024x768 48.4 60.0 65.000
WXGA 1280x768 47.8 60.0 79.500
QVGA 1280x960 60.0 60.0 108.000
SXGA 1280x1024 64.0 60.0 108.000
HD FWXGA 1366x768 47.7 60.0 85.500
CVT 1400x900 55.9 60.0 106.500
WSXGA 1680x1050 65.3 60.0 146.250
FHD 1920x1080 67.5 60.0 148.500
4K 3840x2160
67.5 30.0 297.000
112.5 50.0 594.000
135.0 60.0 594.000
IBM 720x400 31.5 70.0 28.320
SD
NTSC-M 15.7 60.0 13.500
NTSC-J 15.7 60.0 13.500
PAL-BDGHI 15.7 60.0 13.500
480i 60Hz 15.7 60.0 13.500
576i 50Hz 15.6 50.0 13.500
480p 60Hz 31.5 60.0 27.000
576p 50Hz 31.3 50.0 27.000
HD
720p
50Hz 37.5 50.0 74.250
60Hz 45.0 60.0 74.250
1080i
50Hz 28.1 50.0 74.250
60Hz 33.8 60.0 74.250
1080p
50Hz 56.3 50.0 148.500
60Hz 67.5 60.0 148.500
fH(kHz)
fV(Hz)
Dot clock
(MHz)
HDMI2
VGA
HDMI1
HDMI3
DisplayPort
AV
… 41 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Iiyama TE6568MIS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Iiyama TE6568MIS in de taal/talen: Engels als bijlage per email.

De handleiding is 7,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Iiyama TE6568MIS

Iiyama TE6568MIS Gebruiksaanwijzing - Nederlands - 47 pagina's

Iiyama TE6568MIS Gebruiksaanwijzing - Deutsch - 47 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info