48
Filtering System
The filter prevents larger remnants of food or other objects from getting inside the pum.
The residues may block the filter, in this case they must be removed.
The filter system consists of a coarse filter, a flat (Main filter)
And a microfilter (Fine filter).
Main filter 1
Food and soil particles trapped in this filter are
pulverized by a special jet on the lower spray arm and
washed down to drain.
Coarse filter 2
Larger items, such as pieces of bones or glass, that could
block the drain are trapped in the coarse filter. To
remove the items caught by the filter, gently squeeze the
tap on the top of this filter and lift out.
Fine filter 3
This filter holds soil and food residues in the sump area
and prevents it from being redeposit on the dishes
during wash cycle.
Filter assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycled during the
cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good
idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the
semicircular filter and cup under running water. To remove the filter device, pull the cup handle in the
upward direction.
• The dishwasher must never be used without the filters.
• Improper replacement of the filter may reduce the performance level of the appliance and damage
dishes and utensils.
STEP 1: turn the filter in anti-clockwise direction, then lift it up.
STEP 2: lift the Main filter up
STEP 3: lift the Fine filter up
NOTE
When following this procedure from step1 to step 3, the filter system
will be removed; when following it from Step 3 to Step 1, the filter
system will be installed.
WARNING:
MAINTENANCE AND CLEANING
