EN
30
Installing the NANO SIM and SD card:
Switch your phone off before installing the card.
1. Pull the pin for ejecting the SIM card slot from
the package.and insert it into the hole in the
compartment for the SIM card until until it jups off
from the body of the phone.
2. Gently remove the compartment out of the slot.
3. a)1 MICRO SIM b) 1 NANO SIM or 1 MICRO
SIM and one MICRO SD card aim as shown on the
phone and gently push them into the tray.
4. Put the entire compartment together with the
cards back into the phone.
Charging the battery:
Before putting your phone into service you must
recharge its battery.
1. Connect the adapter to the charger. USB-C can
be rotated from both sides. Yet when attaching the
connector, do not use violence.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on/ off/ sleep mode:
Make sure that the phone has a SIM card and the
battery is fully charged.
Press the ON button to switch on the phone.
Switch off the phone by pressing ON and select
OFF. Confirm it by pressing OK.
Press shortly ON button to switch the phone over to
the sleep mode.
