EN
23
3. Optionally, two SIM cards or one SIM card and one
memory card can be inserted into the phone. Card
slots (SIM or memory) are on two floors, each card
belongs to one floor (slot).
Note: if you need to remove the card from the bottom slot,
you need to gently pull the drawer to remove the card
out.
4. Insert the battery with the contacts against the contacts
on the phone. Slide gently the battery in until it locks.
Remember to remove the cover from the battery
contact if it is present.
5. Replace carefully the back cover of the phone, until you
hear, it snaps.
Charging the battery:
Before putting your phone into service you must recharge
its battery for 100%.
1. Connect the adapter into the charger. Make sure that the
adapter is inserted in the correct position. Do not use the
force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the phone from
the charger.
Switching the phone on / off / sleep mode:
Make sure that the phone has a SIM card and the battery is
fully charged.
• Press the ON button to switch on the phone.
• Switch off the phone by pressing ON and select OFF.
Confirm it by pressing OK.
