Timer
By turning the timer clockwise, the intended operating time can be set.
With the timer set to position 'I', the appliance is permanently switched
on. To switch off, turn the timer back to its '0'-position.
When setting the cooking time to less than 10 minutes, turn the timer to
a greater value first and then turn it slowly back to the desired setting.
After the pre-programmed time has elapsed, a sound signal is heard and
the appliance is automatically switched off.
Indicator lamps
The main indicator lamp shows that the appliance is in operation and
remains lit as long as the appliance is connected to the mains and the
timer is active.
Once the pre-set temperature level has been reached, the temperature
indicator lamp lights up.
As soon as the temperature falls below a certain level, heating will
resume as indicated by the lamp.
Temperature control
By means of the temperature control knob, the temperature can be set
to the desired level.
Before using for the first time
✦ Remove any packaging materials completely.
✦ Before the appliance is used for the first time, the frying container
and basket should be thoroughly cleaned. The inside of the lid should
be wiped with a damp cloth. To prevent water from mixing with the
oil, all parts must be thoroughly dried.
✦ Fill the container with approx 2.5 litres of vegetable oil.
Operation
-
Close the lid.
-
Insert the plug into a suitable wall socket.
-
Use the timer to turn the appliance on. The main indicator lamp
lights up.
-
Use the temperature control knob to select the desired temperature
level.
-
Allow the deep fryer to pre-heat. When the pre-set temperature level
has been reached, the temperature indicator lamp comes on.
-
Open the lid
-
Lift out the frying basket.
13
