670150
258
Verklein
Vergroot
Pagina terug
1/282
Pagina verder
18-10
18
CONTROL COMMAND
D Command table (continued)
Cmd. Sub Cmd. Data Description
1B
00 see p. 18-13 Send/read repeater tone frequency
01 see p. 18-13 Set/read TSQL tone frequency
1C
00 00 Send/read transceiver’s status (RX)
* When “CI-V Output (for ANT)” (Command:
1C 04) is set to “ON,” automatically outputs
when changed.
01 Send/read transceiver’s status (TX)
* When “CI-V Output (for ANT)” (Command:
1C 04) is set to “ON,” automatically outputs
when changed.
01 00 Send/read the antenna tuner OFF (through)
01 Send/read the antenna tuner ON
02 Send/read to tuning
02 00 Send/read transmit frequency monitor setting
OFF
01 Send/read transmit frequency monitor setting
ON
03 see p. 18-11 Read transmit frequency
* When “CI-V Output (for ANT)” (Command:
1C 04) is set to “ON,” automatically outputs
when changed.
04 00 Send/read command to disable to output the
antenna controller status (frequency and so
on) from [REMOTE]
01 Send/read command to enable to output the
antenna controller status (frequency and so
on) from [REMOTE]
1E 00 Read number of available TX frequency
band
01 see p. 18-13 Read TX band edge frequencies
02 Read number of user-set TX frequency band
03 see p. 18-13
Send/read user-set TX band edge frequencies
21 00 see p. 18-13 Send/read RIT frequency
01 00 or 01 Send/read RIT setting (00=OFF, 01=ON)
02 00 or 01 Send/read TX setting (00=OFF, 01=ON)
25 see p. 18-14 Send/read the Main or Sub band frequency
26 see p. 18-14 Send/read the selected operating mode and
filter
Cmd. Sub Cmd. Data Description
27 00 see p. 18-15 Read the Scope waveform data
* Only when “Scope ON/OFF status”
(Command: 27 10) and “Scope data output”
(Command: 27 20) are set to “ON,” outputs
the waveform data to the controller.
10 00 or 01 Send/read the Scope ON/OFF status
(00=Scope OFF, 01=Scope ON)
11 00 or 01
Send/read the Scope data output
(00=Output OFF, 01=Output ON)
* Only when “CI-V USB Port” is set to “Unlink
from [REMOTE]” and “CI-V USB Baud
Rate” is set to 115200 (bps), “Output ON” is
selectable.
12 00 or 01 Send/read the Main or Sub scope setting
(00=Main scope, 01=Sub scope)
13 00 or 01 Send/read the Single/Dual scope setting
(00=Single scope, 01=Dual scope)
14 see p. 18-15 Send/read the Scope Center mode or Fixed
mode setting
15 see p. 18-15 Send/read the span setting in the Center
mode Scope
16 see p. 18-15 Send/read the Edge number setting in the
Fixed mode Scope
17 see p. 18-15 Send/read the Scope hold function ON or
OFF
18 see p. 18-16 Send/read the Scope Attenuator setting
19 see p. 18-16 Send/read the Scope Reference level setting
1A see p. 18-16 Send/read the Sweep speed setting
1B 00 or 01 Send/read the Scope indication during TX in
the Center mode
(00=OFF, 01=ON)
1C 00 to 02 Send/read scope center frequency setting in
the Center mode
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.))
1D see p. 18-16 Send/read the Scope VBW setting
1E see p. 18-16 Send/read the Scope Fixed edge frequencies
28 00 00 to 08 Transmits the Voice TX memory content
(00=T1 to 08=T8, 0x00=Cancel TX)
258

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC7850 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC7850 in de taal/talen: Engels als bijlage per email.

De handleiding is 15,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info