34
5
MEMORY OPERATION
5
■ Transferring bank contents
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or erased.
➥ Push [M/CALL(PRIO)] to select memory mode.
➥ Push [BANK(OPT)] then rotate the tuning dial to select
the desired memory bank.
• Bank initial blinks.
➥ Push [BANK(OPT)] to select the bank then rotate the
tuning dial to select the desired contents.
• Bank initial stops blinking.
w Push [MW(S.MW)] momentarily.
•“M” and bank initial blink.
e Rotate the tuning dial to select the desired bank initial to
transfer or erase.
• Select “– –” indication when erasing the contents from the bank.
r Push [MW(S.MW)] again.
•“M” and bank initial or “– –” indication stops blinking.
t Push [BANK(OPT)] twice to return to regular memory con-
dition.
y Repeat steps q to t for transferring or erasing an an-
other banks contents.
z Select the desired bank contents.
➥ Push [MR/CALL] to select memory
mode.
➥ Push [BANK/OPTION] then select the
desired memory bank via [Y]/[Z].
➥ Push [BANK/OPTION] to select the
bank then select the desired contents
via [Y]/[Z].
x Push [FUNC] then [
CLR
A(MW)].
•“M” and bank initial blinks.
c Push [Y]/[Z] to select the desired bank ini-
tial to transfer or erase.
• Select “– –” indication when erasing the con-
tents from the bank.
v Push [
CLR
A(MW)].
•“M” and bank initial or “– –” indication stops
blinking.
b Push [BANK/OPTION] twice to return to
regular memory condition.
n Repeat steps z to b for transferring or
erasing an another banks contents.
