81
7
SCAN OPERATION (Multi-function receiver/Component screens only)
7
■ Programmed scan
Programmed scan automatically searches for signals within
a specified frequency range.
For programmed scan, scan edges must be programmed
in advance.
D Programming scan edge channels
Set the scan edge channel name, frequency range and ATT
in advance. Up to 50 settings can be programmed.
qRight-click the zPROGx button to call up the [Program
Scan] setting screen if it is not displayed.
wClick the [Program Scan] tab to show the program list.
eInput the start frequency into the [Freq Low] cell from the
keyboard, then push [Enter].
• Set other data (e.g. name, end frequency into [Freq High] or at-
tenuator) if desired.
Program the start frequency first, otherwise no setting
can be done except for the name.
rEnter the desired scan edge channel number, then click
the close ([X]) button to close the setting screen.
D Edit menu details
Editing the memory list with the edit menu is the same as the
memory channels. See the following pages for details.
• Copying a memory contents (p. 74)
• Memory channel insert/delete (p. 75)
• Memory channel up/down (p. 75)
• Clearing from the memory list (p. 77)
METER/SCAN
Active band only
MAIN SUB
• [Compo] screen
• [Receiver] screen
IC-PCR2500IC-PCR1500
IC-PCR2500IC-PCR1500
zPROGx
zPROGx
• [Program Scan] screen
Edit menu
q Click
e Click
w
Input the start frequency first,
then set other data.
Click zMENUx, and point to [Pro-
gram Scan Edge]. Then, select
the desired item from the list.
Import :
Export :
Import the CSV file.
Export the CSV file.
