39
4
PANEL DESCRIPTION
4
oIF-SHIFT INDICATOR (p. 61)
Indicates the received signal passband position.
!0IF-FILTER PASSBAND WIDTH INDICATOR (p. 58)
Indicates the current signal passband width.
!1 MAXIMUM FREQUENCY SPAN INDICATORS (p. 99)
➥ Indicates the upper and lower observable frequency lim-
its around a receive frequency.
➥ In the diagram, the upper and lower limits are ± 500
kHz.
!2 LIMIT/PAUSE INDICATOR (p. 99)
➥ “LIMIT” appears when the tuning step (e) is larger than
the automatic sweep step (!3) setting.
• The limit indicator is not indicated when the tuning step and
the sweep step width are the same.
➥ “PAUSE” appears while the band scope is pausing.
!3 FREQUENCY SPAN INDICATOR (p. 99)
Indicates the frequency span selected with the [SPAN +]
or [SPAN –] button.
!4 CENTER FREQUENCY INDICATOR (p. 99)
Indicates the center frequency of the frequency span; this
is for the currently received frequency.
!5 SWEEP STEP INDICATOR (p. 99)
Indicates band scope sweep step.
!6AFC INDICATOR [AFC] (p. 59)
Appears when the AFC (Automatic Frequency Control)
function is ON.
!7 ATTENUATOR INDICATOR [ATT] (p. 59)
Appears when the ATT (Attenuator) function is ON.
!8TSQL/DTCS INDICATOR [TSQL]/[DTCS]
➥ “TSQL” appears when the tone squelch frequency is set.
(p. 94)
➥ “DTCS” appears when DTCS code and the polarity are
set. (p. 95)
!9 REVERSE/POCKET BEEP INDICATOR [R]/
➥ “[R]” appears when the reverse action is set.
(pgs. 94, 95)
➥ “” appears when the pocket beep function is set.
(p. 96)
@0VSC INDICATOR [VSC] (p. 61)
Appears when the VSC (Voice Squelch Control) function is
ON.
@1AGC INDICATOR [AGC-F] (p. 60)
“AGC-F” appears when the AGC fast is selected.
@2NB INDICATOR [NB] (p. 60)
Appears when the NB (Noise Blanker) function is ON.
@3 FREQUENCY/TIME INDICATOR [FREQ]/[TIME] (p. 99)
➥ “FREQ” appears when Frequency mode is selected in
the band scope operation.
➥ “TIME” appears when Time mode is selected in the
band scope operation.
@4TIME INTERVAL INDICATORS (p. 99)
Indicates the time interval to sweep the receiving signal.