522360
86
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
INSTRUCTION MANUAL
iM91D
iM92D
VHF MARINE TRANSCEIVER
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.
CLEAR
i
FOREWORD
Thank you for purchasing this Icom product. The IC-M91D
and IC-M92D
VHF MARINE TRANSCEIVER are designed and built
with Icom’s state of the art technology and craftsmanship.
With proper care this radio should provide you with years of
trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL—This
instruction manual contains important operating instructions
for the IC-M91D and IC-M92D.
This instruction manual includes some functions which are
usable only when they are pre-programmed by your dealer.
Ask your dealer for details.
EXPLICIT DEFINITIONS
WORD DEFINITION
RDANGER!
Personal death, serious injury or an ex-
plosion may occur.
RWARNING!
Personal injury, fi re hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fi re or electric shock.
FEATURES
Floats on water
The transceiver floats in fresh or salt
water even when the supplied accesso-
ries are attached.
When a third-party battery pack, strap, an-
tenna, and so on is used, it may sink.
Floats and fl ashes
When the transceiver detects that it has
come in contact with water, the LCD
backlight, keys and trim start to blink,
making it easy to fi nd the transceiver
even at night or in a dark environment.
ii
IN CASE OF EMERGENCY
If your vessel requires assistance, contact other vessels and
the Coast Guard by sending a distress call on Channel 16.
Or, transmit your Distress call using digital selective calling
on Channel 70.
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1. “MAYDAY MAYDAY MAYDAY.”
2. “THIS IS ...............” (name of vessel).
3. Say your call sign or other indication of the vessel (AND
your 9-digit DSC ID, if you have one).
4. “LOCATED AT ...............” (your position).
5. State the nature of the distress and assistance re-
quired.
6. Give any other information which might facilitate the
rescue.
USING DIGITAL SELECTIVE CALLING (Ch 70)
DISTRESS CALL PROCEDURE
1. While lifting up the key cover, hold down [DISTRESS] for
3 seconds until you hear 3 short beeps and then one long
beep.
2. Wait for an acknowledgment on Channel 70 from a coast
station.
After the acknowledgement is received, Channel 16 is
automatically selected.
3. Push and hold [PTT], then transmit the appropriate infor-
mation as listed to the left.
iii
RECOMMENDATION
CLEAN THE TRANSCEIVER THOROUGHLY WITH FRESH
WATER after exposure to saltwater. Otherwise, the trans-
ceiver's keys, switches and controllers may become inoper-
able due to salt crystallization.
NOTE: DO NOT wash the transceiver in water if there is any
reason to suspect the waterproofi ng may not be effective. For
example, in cases where the battery pack rubber seal is dam-
aged, the transceiver/battery pack is cracked or broken, or
has been dropped, or when the battery pack is detached from
the transceiver.
R
WARNING! NEVER connect the transceiver to an
AC outlet. This may pose a fi re hazard or result in an electric
shock.
R
WARNING! NEVER hold the transceiver so that
the antenna is very close to, or touching exposed parts of
the body, especially the face or eyes, while transmitting. The
transceiver will perform best if the microphone is 5 to 10 cm (2
to 4 inches) away from the lips and the transceiver is vertical.
R
WARNING! NEVER operate the transceiver with
other audio accessories at high volume levels. Hearing ex-
perts advise against continuous high volume operation. If you
experience a ringing in your ears, reduce the volume level or
discontinue use.
DO NOT modify the transceiver. The transceiver warranty does
not cover any problems caused by unauthorized modifi cation.
BE CAREFUL! The transceiver will become hot when
operating it continuously for long periods of time.
KEEP the transceiver and microphone at least 1 m (3.3 feet)
away from the vessel’s magnetic navigation compass.
KEEP the transceiver out of the reach of children.
PRECAUTIONS
iv
PRECAUTIONS
CAUTION: MAKE SURE the fl exible antenna, bat-
tery pack and jack cover are securely attached to the trans-
ceiver,
and that the antenna and battery pack are dry before
attachment. Exposing the inside of the transceiver to dust or
water will result in serious damage to the transceiver.
DO NOT operate the transceiver near unshielded electri-
cal blast ing caps or in an explosive atmosphere.
DO NOT
push [PTT] when not actually intending to transmit.
DO NOT use or place the transceiver in direct sunlight
or in areas with temperatures below –20°C (–4°F) or above
+60°C
(+140°F), and for the Australian version, below –10°C
or above +55°C
(+140°F).
The basic operations, transmission and reception of the
transceiver are guaranteed within the specifi ed operating
temperature range.
However, the LCD display may not be
operate correctly, or show an indication in the case of long
hours of operation, or after being placed in extremely cold
areas.
DO NOT use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the transceiver surfaces.
BE CAREFUL! The IC-M91D and IC-M92D meet IPX7*
requirements for dust-tight and waterproof protection. How-
ever, once the transceiver has been dropped, dust-tight and
waterproof protection cannot be guaranteed because of pos-
sible damage to the transceiver’s case or the waterproof
seal.
*
Only when the jack cover or the optional HM-167 is at-
tached.
Even when the transceiver power is OFF, a slight current still
ows in the circuits. Remove the battery pack or batteries
from the trans ceiver when not using it for a long time. Other-
wise, the installed battery pack or batteries will become ex-
hausted, and will need to be recharged or replaced.
BE CAREFUL! Even if the volume level is set low, the
beeps of the Float ’n Flash, DSC alarm and AquaQuake func-
tions are very loud.
MAKE SURE to turn the transceiver power OFF before
connect ing the supplied/optional equipment.
For U.S.A. only:
CAUTION: Changes or modifi cations to this transceiver, not
expressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
v
FCC INFORMATION
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
FOR CLASS B UNINTENTIONAL RADIATORS
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following mea-
sures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
ceiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
TABLE OF CONTENTS
FOREWORD .........................................................................i
IMPORTANT .......................................................................... i
EXPLICIT DEFINITIONS ....................................................... i
FEATURES ............................................................................i
IN CASE OF EMERGENCY ................................................. ii
RECOMMENDATION .......................................................... iii
PRECAUTIONS ................................................................... iii
FCC INFORMATION ............................................................ v
TABLE OF CONTENTS ........................................................ v
1 OPERATING RULES ........................................................1
2 SUPPLIED ACCESSORIES AND ATTACHMENTS .....2–3
Supplied accessories ...................................................2
Attachments .................................................................2
3 PANEL DESCRIPTION .................................................4–9
Front, top, side and rear panels ...................................4
Softkeys .......................................................................6
Function display ..........................................................7
Softkey function ............................................................9
4 PREPARATION ...............................................................10
MMSI code programming ...........................................10
5 BASIC OPERATION .................................................11–16
Channel selection ......................................................11
Call channel programming .........................................13
vi
Adjusting the volume level ..........................................13
Adjusting the squelch level .........................................13
Receiving and transmitting .........................................14
Lock function .............................................................. 15
Monitor function .........................................................15
AquaQuake water draining function ...........................15
Backlight setting ......................................................... 15
Channel name programming ......................................16
6 SCAN OPERATION ..................................................17–18
Scan types ................................................................17
Setting Favorite (TAG) channels ................................18
Starting a scan ........................................................... 18
7 DUALWATCH/TRI-WATCH .............................................19
Description .................................................................19
Operation ...................................................................19
8 DSC OPERATION .....................................................20–70
DSC address ID ........................................................20
Position and time programming ..................................23
Distress call ................................................................24
Transmitting DSC calls ............................................... 28
Receiving DSC calls ..................................................51
Received Call log .......................................................63
Transmitted Call log ....................................................65
DSC Settings .............................................................66
9 OTHER FUNCTIONS ................................................71–81
MOB (Man OverBoard) ..............................................71
Waypoint ....................................................................74
Navigation
..................................................................78
Compass screen ........................................................80
GPS status screen .....................................................81
10 MENU SCREEN OPERATION ................................82–88
Menu screen operation ..............................................82
Menu screen items .....................................................83
Radio Settings items ..................................................84
Confi guration items ....................................................85
11 BATTERY CHARGING ............................................89–93
Batte ry caution ...........................................................89
Regular battery charger .............................................91
Optional battery chargers ...........................................92
12 OPTIONAL SPEAKER-MICROPHONE ........................94
HM-167 descriptions ..................................................94
Attachment ................................................................. 94
13 TROUBLESHOOTING ...................................................95
14 SPECIFICATIONS AND OPTIONS .........................96–97
Specifi cations ............................................................. 96
Options .......................................................................97
15 VHF MARINE CHANNEL LIST .....................................98
16 SAFETY TRAINING INFORMATION ....................99–100
TABLE OF CONTENTS
1
1
OPERATING RULES
Priorities D
Read all rules and regulations pertaining to priorities and
keep an up-to-date copy handy. Safety and distress calls
take priority over all others.
You must monitor Channel 16 when you are not operating
on another channel.
False or fraudulent distress calls are prohibited under law.
Privacy D
Information overheard but not intended for you cannot law-
fully be used in any way.
Indecent or profane language is prohibited.
Radio licenses D
(1) SHIP STATION LICENSE
You must have a current radio station license before using
the transceiver. It is unlawful to operate a ship station which
is not licensed.
Inquire through your dealer or the appropriate government
agency for a Ship-Radiotelephone license application. This
government-issued license states the call sign which is your
craft’s identifi cation for radio purposes.
(2) OPERATOR’S LICENSE
A Restricted Radiotelephone Operator Permit is the license
most often held by small vessel radio operators when a radio
is not required for safety purposes.
The Restricted Radiotelephone Operator Permit must be
posted or kept with the operator. Only a licensed radio opera-
tor may operate a transceiver.
However, non-licensed individuals may talk over a transceiv-
er if a licensed operator starts, supervises, ends the call and
makes the necessary log entries.
A current copy of the applicable government rules and regu-
lations is only required to be on hand for vessels in which
a radio telephone is compulsory. However, even if you are
not required to have these on hand it is your responsibility to
be thoroughly acquainted with all pertinent rules and regula-
tions.
NOTE: Even though the IC-M92D is capable of operation
on VHF marine channe
ls 3, 21, 23, 61, 64, 81, 82 and
83,
according to FCC regulations these simplex chan-
nels cannot be lawfully used by the general population in
U.S.A. waters.
2
2
SUPPLIED ACCESSORIES AND ATTACHMENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Supplied accessories
Battery packHandstrap
Belt clip
Battery charger
(with 2 screws)
Antenna
AC adapter
(Different type may be
supplied, depending
on the version)
Cigarette lighter cable
Attachments
D Flexible antenna
Connect the supplied fl exible antenna
to the antenna connector.
CAUTION:
NEVER carry the transceiver by hold-
ing the antenna.
Transmitting without an antenna may
damage the transceiver.
D Handstrap
Pass the handstrap through
the loop on the back side of
the transceiver as illustrated
at right. This facilitates carry-
ing.
D Belt clip
Attach/detach the belt clip to the transceiver as illustrated
below.
To attach the belt clip To detach the belt clip
Be careful!
Do not break
your finger
nails.
w
q
3
2
SUPPLIED ACCESSORIES AND ATTACHMENTS
Battery pack D
To remove the battery pack:
Turn the screw counter clockwise one quarter turn, then pull
the battery pack in the direction of the arrow, as shown below.
To attach the battery pack:
Insert the battery pack completely into the transceiver, then
turn the screw clockwise one quarter turn.
NEVER remove or insert the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver or battery pack and may result in
the transceiver being damaged.
NOTE: When removing or attaching the battery pack, use
a coin or standard screwdriver to loosen or tighten the bot-
tom screw.
CAUTION:
When attaching or removing a battery pack, make sure
the rubber seal is set in the groove of the battery pack
correctly. If the seal is not correctly in the groove, it may
be damaged when attaching the battery pack. If the seal is
damaged, waterproof protection is not guaranteed.
Make sure the rubber seal is properly seated in the
groove and dust or other material does not adhere to it.
Battery pack
Battery pack
Rubber seal
Groove
Correct position
Incorrect position
NOTE:
When attaching a battery pack, make sure dust or other
material does not adhere to the rubber seal. If dust or other
material is on the seal when attaching a battery pack,
waterproof protection may not be guaranteed.
Screw position
when removing battery
Screw position
when attaching battery
4
3
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Front, top, side and rear panels
Function
display
(pp. 7, 8, 9)
Microphone
r
e
y
w
q
!0
i
u
o
Speaker
!1
/+%
t
!2
Distress key
(p. 24)
q ANTENNA CONNECTOR (p. 2)
Connects to the supplied antenna.
w
SPEAKER-MICROPHONE CONNECTOR [SP MIC]
(p. 94)
Connects to the optional external speaker-microphone.
NOTE: Attach the [SP MIC] cap when the optional
speaker-microphone is not used. Otherwise, water will
get into the transceiver.
e PTT SWITCH [PTT]
Hold down to transmit; release to receive. (
p. 14)
r MENU KEY
Push to enter or exit the Menu screen
.
t LEFT AND RIGHT KEYS [Ω]/[]
Push to switch to the previous or next key function that
is assigned to the softkeys. (
p. 9)
Push to select the desired character or number in the
table while in the channel name, position, MMSI code
programming mode, and so on. (
pp. 10, 16, 23)
y VOLUME/SQUELCH KEY [VOL/SQL]
Push to enter the volume level adjustment mode.
(
p. 13)
Push again while in the volume level adjustment mode
to enter the squelch level adjustment mode.
Hold down for 1 second to activate the monitor function.
(p. 15)
u POWER KEY [
]
Hold down for 1 second to turn the power ON or OFF.
5
3
PANEL DESCRIPTION
Front, top and rear panels (Continued)
i CHANNEL 16 KEY [16/C]
Push to select Channel 16. (
p. 11)
Hold down for 1 second to select the Call channel.
(
p. 11)
Hold down for 3 seconds to enter the Call channel
programming mode when the Call channel is selected.
(
p. 13)
o ENTER KEY
Push to set the input data, selected item, and so on.
!0 CLEAR/LOCK KEY [
]
Push to cancel the entered data, or to return to the pre-
vious screen.
Hold down for 1 second to turn the key lock function ON
or OFF. (p.
15)
!1
UP AND DOWN/CHANNEL SELECT KEYS [CH]/[CH]
Push to select the operating channels, Menu items,
Menu settings, and so on. (
p. 82)
Push to check Favorite (TAG) channels, change the
scanning direction or manually resume a scan. (
p. 18)
!2 SOFTKEYS
Slide the menu by pushing the [Ω]/[] keys, then push ei-
ther of the 4 softkeys to select a menu displayed at the
bottom of the LCD display.
See Softkeys on the next page for more details. (
p. 6)
Function
display
(pp. 7, 8, 9)
Microphone
r
e
y
w
q
!0
i
u
o
Speaker
!1
/+%
t
!2
Distress key
(p. 24)
6
3
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Softkeys
The desired functions as described below can be assigned
in the Menu screen.
Scan [
] (p. 17)
Push to start or stop a Normal or Priority scan.
Dualwatch/Tri-watch [
] (p. 19)
Push to start a Dualwatch or Tri-watch.
Push to stop a Dualwatch or Tri-watch when either is
activated.
High/Low [
] (p. 14)
Push to set the power to high or low.
Some channels are set to only low power.
Channel/Weather Channel [ ] (p. 11)
Push to select either the regular channels or the Weather
channels.
AquaQuake [
] (p. 15)
While holding down, the AquaQuake function is activated
to clear water away from the speaker grill.
Favorite channel [ ] (p. 18)
Push to set or clear the displayed channel as a Favorite
(Tag) channel.
Hold down for 3 seconds to clear or set all Favorite
channels in the selected channel group.
Name [
] (p. 16)
Push to enter the channel name programming mode.
Backlight [
] (p. 15)
Push to enter the LCD and key backlight brightness ad-
justment mode.
While in the adjustment mode, push []/[][Ω]/[] to adjust the
brightness of the LCD and key backlight.
MOB [ ] (p. 71)
Push to enter “MOB” in the menu screen.
Hold down for 1 second to memorize the current position
as the MOB (Man OverBoard) point.
Waypoint [ ] (p. 74)
Push to enter “WAYPOINT” in the menu screen.
Hold down for 1 second to memorize the current position
as a Waypoint.
7
3
PANEL DESCRIPTION
Function display
q
!4
w
e
r
t
y
ui
!2
!3
o
!0
!1
!7
!6
!5
q BUSY/TRANSMIT INDICATOR (p. 14)
“BUSY” appears when receiving a signal or when the
squelch opens.
“TX” appears while transmitting.
“MONI” appears while the monitor function is activated.
w POWER ICON (p. 14)
“HI” appears when high power is selected.
“LOW” appears when low power is selected.
e
CHANNEL GROUP ICON/ WEATHER CHANNEL (p. 12)
The selected channel group icon is displayed as U.S.A.
“USA,” International “INT, Canadian “CAN”
or weather
channel “WX
,
depending on the transceiver version.
r CALL CHANNEL ICON (p. 11)
Appears when Call channel is selected.
Navigation [ ] (p. 78)
After holding down [MOB], or in the MOB or Waypoint list
screen, push this key to start navigating to the selected
position.
Compass [
] (p. 80)
Push to display the compass screen to show the vessel’s
course heading, SOG (Speed Over Ground) and COG
(Course Over Ground).
Log [ ] (p. 63)
Push to enter “RCVD CALL LOG” in the DSC CALLS menu.
Softkeys (Continued)
8
3
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
!3 KEY ICON (p. 9)
Shows the programmed function of the softkeys on the
front panel.
!4 TIME ZONE INDICATOR
Shows the current time when GPS data is received, or
the time is manually programmed.
“??” will blink when invalid GPS data is received for 30
seconds.
??” will blink when manually input GPS data is no longer
valid after 4 hours, and then NO TIME” will appear after
23.5 hours.
“LOCAL appears when the offset time is set.
“NO TIME” appears when no GPS data is received and
no time data is manually input.
“MNL appears when the time is manually programmed.
t DUPLEX ICON (p. 12)
Appears when a duplex channel is selected.
y FAVORITE CHANNEL ICON (p. 18)
Appears while a Favorite (TAG) channel is selected.
u MAIL ICON (p. 51)
Blinks when there is an unread message.
i GPS ICON
Stays ON while the GPS data is received, and a valid
position is received.
Blinks when an invalid position is being received.
o SWITCH ICON (p. 67)
Appears when the “CH 16 SWITCH” in DSC Settings is set
to ‘OFF.’
!0 LOCK ICON (p. 15)
Appears while the lock function is activated.
!1 CHANNEL NUMBER READOUT
Shows the selected operating channel number.
• When a simplex channel is selected, “A” appears.
!2 CHANNEL NAME FIELD (p. 16)
The channel name appears, if programmed.
“DSC CHECK” blinks while receiving on CH70.
9
3
PANEL DESCRIPTION
Softkey function
Various functions can be assigned to the softkeys.
When the key function is assigned, the key icon is displayed
above the softkeys, as shown below.
Softkey function selection D
When “Ω or “ is displayed beside the key icon, pushing [Ω]
or [] sequentially displays the previous or next key function
that is assigned to the softkey.
Push Push
*Push this key to start or stop a scan.
*
The order of the key icons may differ, depending on the
preprogramming.
Function Display (Continued)
!5 POSITION INDICATOR
Shows the current position when valid GPS data is re-
ceived or the position is manually programmed.
“??” will blink when invalid GPS data is received for 30
seconds.
??” will blink when manually input GPS data is no longer
valid after 4 hours, and then NO POSITION” will appear
after 23.5 hours.
NO POSITION” is displayed when no GPS data is received
since the transceiver power turned ON.
“NO POSITION” appears when no GPS data is received,
and no position is manually input.
!6 SCAN INDICATOR
“SCAN 16” is displayed during a Priority scan; “SCAN”
appears during a Normal scan. (p.
17)
“DUAL 16” appears during Dualwatch; “TRI 16” appears
during Tri-watch. (
p. 19)
!7 BATTERY INDICATOR
Shows the battery’s remaining power.
Indication
Full Middle
Charging
required
No battery
Battery level
blinks when the battery is over charged.
10
4
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MMSI code programming
The 9 digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This initial code setting can be performed only once.
After being set, it can be changed by only your dealer
or distributor. If your MMSI code has already been pro-
grammed, this programming is not necessary.
Hold down [ q
] to turn ON the power.
• Three short beeps sound, and “NO DSC MMSI” is displayed.
Push [ENTER] to start the MMSI code programming. w
Push [CLEAR] twice to cancel the programming, and go to the
normal operating screen. In this case, the transceiver cannot
make a DSC call. To program the MMSI code, turn OFF the
power, then turn it ON again.
Enter your MMSI code in the following manner: e
• Select a desired number using []/[]/[Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
Repeat step re to enter all 9 digits.
After entering the 9 digit code, “FINISH” is automatically t
selected, and then push [ENTER] to set it.
The “MMSI CONFIRMATION” screen is displayed. y
Enter your MMSI code again for confirmation. u
• Enter in the same manner as steps e through t.
When your MMSI code programming is successfully com- i
pleted, the screen as shown below is briefl y displayed.
• After that, the normal operating screen is displayed.
The programmed MMSI code can be checked in the MENU
screen. (
p. 83)
11
5
BASIC OPERATION
Channel selection
IMPORTANT: Prior to using the transceiver for the fi rst
time, the battery pack must be fully charged for optimum
life and operation. To avoid damage to the transceiver,
turn the power OFF while charging.
Channel 16 D
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with a station and for emergency
communications. Channel 16 is monitored during both Du-
al-watch and Tri-watch. While in the standby condition, you
must monitor Channel 16.
Push [16/C] to select Channel 16. q
Push [ w
CH/WX] to return to the selected channel before
Channel 16, or push [](CH) or [](CH) to select an op-
erating channel.
Push [16/C] key
Call channel D
Each regular channel group has separate leisure-use call
channels. The call channel is monitored during Tri-watch.
The call channels can be programmed and are used to store
your most often used channel in each channel group for quick
recall. (p
. 13)
Hold down [16/C] q for 1 second to select Call channel.
• “CALL” and the call channel number are displayed.
Call channel can be re-programmed. See the “Call channel pro-
gramming” on page 13 for details.
Select w [CH/WX] to return to the selected channel before
the call channel, or push [](CH) or [](CH) to select the
operating channel.
Hold down [16/C] key
for 1 second
12
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel group selection D
There are preprogrammed U.S.A. channels, International
channels and Canadian* channels. These channel groups
may be specifi ed for the operating area.
* For only the U.S.A. and EXP transceiver versions.
Push q [MENU].
Push [ w Y]/[Z] to select Radio Settings”.
Push [ e Y]/[Z]
to select “CHAN Group”, and then push [EN-
TER].
r Push [Y]/[Z] to select the desired channel group, and then
push [ENTER].
U.S.A. (USA), International (INT) and Canadian (CAN) channel
groups can be selected.
t Push [EXIT] to exit the Menu screen.
Push y
[Y](CH)/[Z](CH) to select a channel.
• “DUP” appears for duplex channels.
• “A” appears for simplex channel.
Weather channels D
The transceiver has 10 pre-programmed weather channels.
These are used for monitoring broadcasts from NOAA (Na-
tional Oceanographic and Atmospheric Administration.) The
transceiver can automatically detect a weather alert tone on
the selected weather channel or while scanning. (p
. 17)
To Select a Weather channel:
Push
[CH/WX] to select a weather channel.
• “WX” is displayed when a weather channel is selected.
The Weather channel alert icon appears when the alert function
is turned ON.
To set the Weather Alert:
Push [MENU]. q
Push [ w Y]/[Z] to select Radio Settings” and then push
[ENTER].
Select e “WX Alert” and then push [ENTER].
r Select ON” or “ON with Scan” to set the Weather Alert.
t Push
[EXIT] to exit the Menu screen.
WX Alert icon appears.
13
5
BASIC OPERATION
Call channel programming
You can program the call channel with your most often-used
channels in each channel group for quick recall.
Select the q
desired U.S.A., Canada or International chan-
nel group
to be programmed. (p. 12)
Hold down [16/C] for 1 second to select the call channel of w
the selected channel group.
• “CALL” and call channel number are displayed.
Hold down [16/C] again for 3 seconds until long beep stops e
with two short beeps.
• The channel programming mode screen is displayed.
r Push [Y](CH)/[Z](CH) to select the desired channel.
t Push [ENTER] to program the selected channel as the call
channel.
The display automatically returns to the normal operating mode.
Adjusting the volume level
The volume level can be adjusted with [VOL/SQL] and [
]/
[
]/[Ω]/[] keys.
q
Push [VOL/SQL] once to enter the volume adjustment
mode, then adjust the volume level with
[]/[] or [Ω]/[].
The transceiver has 20 volume levels and OFF.
If no key operation is performed for 5 seconds, the transceiver
sets the selected level, and returns to the normal mode.
w
Push [ENTER] to set, and exit the volume adjustment mode.
• Push [CLEAR] to cancel.
Adjusting the squelch level
The squelch level can be adjusted with [VOL/SQL] and [
]/
[
]/[Ω]/[] keys.
In order to receive signals properly, as well as for the scan
to function effectively, the squelch must be adjusted to its
proper level.
Push [VOL/SQL] twice to enter the squelch adjustment q
mode, then adjust the squelch level with []/[] or [Ω]/[].
The transceiver has 11 squelch levels: OPEN is completely
open, 10 is tight squelch and 1 is loose squelch.
If no key operation is performed for 5 seconds, the transceiver
sets the selected level, and returns to the normal mode.
w
Push [ENTER] to set, and exit the squelch adjustment mode.
• Push [CLEAR] to cancel.
14
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving and transmitting
CAUTION: Transmitting without an antenna will damage
the transceiver.
Hold down [ q
] for 1 second to turn power ON.
Set the volume and squelch levels with [VOL/SQL]. w
Push e
[Y](CH)/[Z](CH) to select the desired channel.
Further adjustment of the audio may be necessary at this point.
r Select [HI/LO] to select the output power if necessary.
HI” appears when high power is selected; “LOW” when low
power is selected.
Choose low power for short range communications, choose
high power for longer distance communications.
• Some channels are for low power only.
t
Hold down [PTT] to transmit, then speak into the microphone.
• “TX” appears.
• Channel 70 cannot be used for transmission.
y Release [PTT] to receive.
Information
The Noise Cancel function reduces random noise com-
ponents in the transmit and/or receive signal. See pag
e
86
for details
The transceiver monitors channel 70 every specifi c
time period even when standing by on an operating
channel.
DSC CHECK” is displayed when channel 70 is busy.
The channel 70 monitoring confi guration can be changed in
DSC Settings. See page 69 for details.
IMPORTANT:
To maximize the readability of your transmit-
ted signal, pause a few seconds after pushing [PTT], hold
the microphone 5 to 10 cm (2 to 4 inches) from your mouth
and speak into the microphone at a normal voice level.
NOTE: The transceiver has a power save function to con-
serve battery power. The power save function is activated
automatically when no signal is received for 5 seconds.
To prevent accidental prolonged transmission, the trans-
ceiver has a time-out timer function. This timer cuts a
transmission OFF after 5 minutes of continuous transmis-
sion.
q
Microphone
r
e
t
w
y
15
5
BASIC OPERATION
Lock function
This function electronically locks all keys (except for [PTT],
[DISTRESS] and [
]) to prevent accidental channel changes
and function access.
Push [CLEAR/
] for 1 second to turn the lock function
ON and OFF.
The lock function is automatically released when DSC call is
received, or [DISTRESS] is pushed.
Monitor function
The Monitor function opens the squelch by holding down
[VOL/SQL] for 1 second.
• “ ” appears while the function is activated.
The function can be set to “PUSH” or “HOLD” in the following
manner.
Select “Configuration” in the “MENU” screen. q
Select “Monitor” to enter the “Push” or “Hold” selecting mode. w
• Push:
The monitor function is activated by holding down [VOL/SQL]
for 1 second. The squelch opens while holding down the key.
• Hold: The monitor function is activated by holding down [VOL/
SQL] for 1 second. The squelch stays open until any key
is pushed.
AquaQuake water draining
function
The AquaQuake water draining function clears water away
from the speaker grill. Without this function, water may muffl e
the sound coming from the speaker. The transceiver emits a
vibrating beep when this function is activated.
While holding down [AQUA], the AquaQuake function is acti-
vated to clear water away from the speaker grill.
• Beep sounds, regardless of the volume level setting.
Activates for 10 seconds in maximum to drain water.
The transceiver never accepts key operation while the Aqua-
Quake function is activated.
The AquaQuake function can not be activated when an optional
speaker-microphone is connected.
Backlight setting
This function lights the function display and keys, and it is
convenient for night-time operation.
Select q [BKLT] to enter the backlight adjusting mode.
Push w []/[] or [Ω]/[≈] to adjust the brightness level be-
tween 1(minimum) to 7 (maximum) or OFF.
• The default setting is 4.
The display returns automatically to the main menu after 5 sec-
onds without no key operation is been performed.
The backlight automatically turns OFF when no key operation
is performed for 5 seconds.
Displayed when
the lock function
is activated.
16
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel name programming
Each channel can be assigned a unique alphanumeric ID of
up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + , .
/ [ \ ] ^ _ : ; < = > ?) and space can be used.
Push [ q ](CH) or [](CH) to select a channel.
First, cancel the Dualwatch, Tri-watch or Scan function, if acti-
vated.
Push [NAME] to open the channel name programming w
screen.
A black box is displayed on the fi rst character.
Enter the desired channel name in the following manner: e
• Select a desired character using []/[]/[Ω]/[].
• Push [ENTER].
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
• Select “SPACE,” then push [ENTER] to input a space.
• Select “DELETE,” then push [ENTER] to delete a character.
• Push [CLEAR] to cancel and return to the previous screen.
Repeat step re to input all characters.
Push [ t Ω]/[]/[]/[] to select “FINISH, then push [EN-
TER] to set and return to the previous screen.
17
6
SCAN OPERATION
Scan types
Scanning is an effi cient way to locate signals quickly over a
wide frequency range. The transceiver has both priority scan
and normal scan.
When the Weather Alert function is turned ON, the weather
channel is also checked while scanning. (p. 85)
WX*
CH 01
CH 16
CH 02
CH 05 CH 04
CH 03
When the weather alert function is activated.
*
PRIORITY SCAN
Priority scan sequentially searches through all
Favorite channels while monitoring Channel 16.
When a signal is detected on Channel 16, scan
pauses until the signal disappears; when a signal is
detected on a channel other than Channel 16, scan
becomes Dualwatch until the signal disappears.
Set the Favorite channels (scanned channels) before scan-
ning. Clear the Favorite for unwanted channels which incon-
veniently stop scanning, such as those for digital communica-
tions.
Choose the desired scan type from “Priority” or “Normal” in
the set mode. (p. 84)
CH 01 CH 02
WX*
CH 05 CH 04
CH 03
When the weather alert function is activated.
*
NORMAL SCAN
Normal scan, like Priority scan, searches through all
Favorite channels in sequence. However, unlike Priority
scan, Channel 16 is not checked unless Channel 16 is
set as a Favorite channel.
18
6
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Starting a scan
First, set the scan type (Priority or Normal scan), WX Alert func-
tion
and scan resume timer in the Menu screen. (pp. 84, 85)
Select the desired channel group. (p. q
12
)
Set the Favorite channels, as described to the left. w
Make sure the squelch is closed to start a scan. e
Push [SCAN] to start a Priority or Normal scan. r
SCAN 16” appears during a Priority scan; “SCAN” appears
during a Normal scan.
When a signal is detected, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending
on the setting. (Channel 16 is still monitored during a Priority
scan.)
Push [Y]/[Z] check the scanning Favorite channels, change
the scanning direction or manually resume the scan.
A beep tone sounds and “16” blinks when a signal is received
on Channel 16 during a Priority scan.
To stop the scan, push [CLEAR] or repeat step tr.
Setting Favorite channels
For more effi cient scanning, add the desired channels as Fa-
vorite channels, or clear
for unwanted channels.
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (U.S.A., International and Canada*).
* For only the U.S.A. and EXP transceiver versions.
q
Select the desired channel group. (p.
12
)
w
Select the desired channel to be set as a Favorite channel.
Push [ e ] to set the displayed channel as a Favorite channel
.
appears on the display.
To cancel the Favorite channel setting, repeat step re.
disappears.
Clearing (or setting) all tagged channels
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
• Repeat above procedure to set all channels as Favorite channels.
Scan starts. When a signal is received.
Push
[SCAN]
[Example]: Starting a Normal scan.
19
7
DUALWATCH/TRI-WATCH
Description
Dualwatch monitors Channel 16 while you are receiving on
another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch is convenient for monitoring Channel 16 when you are
operating on another channel.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch Tri-watch
Call
channel
Ch 88
Ch 16
Ch 88
Ch 16
Ch 88
Ch 9
If a signal is received on Channel 16, Dualwatch/Tri-watch
pauses on Channel 16 until the signal disappears.
If a signal is received on the call channel during Tri-watch,
Tri-watch becomes Dualwatch until the signal disap-
pears.
To transmit on the selected channel during Dualwatch/
Tri-watch, hold down [PTT].
Operation
Select Dualwatch or Tri-watch in the Menu screen. (p. 84) q
Push [ w Y](CH) or [Z](CH) to select the desired operating
channel.
Push [DW] to start a Dualwatch or Tri-watch scan. e
DUAL 16” appears during Dualwatch; “TRI 16” appears during
Tri-watch.
A beep tone sounds when a signal is received on Channel 16.
To cancel Dualwatch or Tri-watch, push [DW] again. r
[Example]: Operating Tri-watch on INT Channel 25.
Tri-watch starts.
Signal is received
on Call channel.
Tri-watch resumes after
the signal disappears.
Signal received on Chan-
nel 16 takes priority.
20
8
DSC OPERATION
DSC address ID
Programming Individual ID D
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter “INDIVIDUAL ID” in the DSC SETTINGS menu. q
Push [ADD]. w
The “INDIVIDUAL ID” program screen is displayed.
Enter a desired individual ID in the following way: e
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID.
The fi rst two digits are ‘0’ for any Coast station ID.
Repeat step re to enter all 9 digits.
After entering the 9 digit code, push [ENTER] to set it. t
The ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way: y
• Select a desired character using []/[]/[Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
• Push [123] then [!$?] then [ABC] to select a character group.
After entering the ID name, push [ u ]/[]/[Ω]/[] to select
“FINISH,” then push [ENTER] to program it.
The “INDIVIDUAL ID” list screen is displayed.
Push [MENU] to exit the MENU screen. i
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MENU DSC Settings
Individual ID
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
21
8
DSC OPERATION
N
ew
2001
N
e
w
Programming Group ID D
Enter “GROUP ID” in the DSC SETTINGS menu. q
Push [ADD]. w
The “GROUP ID” program screen is displayed.
Enter a desired group ID in the following way: e
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is fi xed as ‘0’ for a Group ID.
The fi rst two digits are ‘0’ for any Coast station ID.
Repeat step re to input the specifi c 9 digits group code.
After entering the 9 digit code, push [ENTER] to set it. t
The Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way: y
• Select a desired character using []/[]/[Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, push [ u ]/[]/[Ω]/[] to select
“FINISH,” then push [ENTER] to program it.
The “GROUP ID” list screen is displayed.
Push [MENU] to exit the MENU screen. i
MENU DSC Settings
Group ID
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
22
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Deleting Individual/Group ID D
Enter “INDIVIDUAL ID” or “GROUP ID” in the DSC SET- q
TINGS menu.
When no address ID is programmed, “No ID” is displayed. In this
case, push [MENU] to exit the MENU screen.
Push [ w Y]/[Z] to select a desired ID name, then push
[DEL].
Push [OK] to delete the ID, and return to the “INDIVIDUAL e
ID” or “GROUP ID” list screen.
• Push [CANCEL] to cancel it.
Push [MENU] to exit the MENU screen. r
MENU DSC Settings
Individual ID
/
Group ID
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
23
8
DSC OPERATION
N
ew
2001
N
e
w
A Distress call should include the ship’s position and time. If
no GPS data is received, your position and UTC (Universal
Time Coordinated) time should be manually input.
Manual programming is disabled while GPS data is re-
ceived.
Manually programmed position and time will be held for
only 23.5 hours.
Enter “POSITION INPUT” in the DSC SETTINGS menu. q
Edit your latitude and longitude position using [ w ]/[]/[Ω]/
[].
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
Select N (North latitude) or S (South latitude) when the cursor is
on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cursor
is on the ‘W’ or ‘E’ position.
After entering the position, push [ENTER] to program it. e
The UTC time programming screen is displayed, enter the r
UTC time in the following way:
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
Push [ENTER] to program your position and time. t
• Return to the “DSC SETTINGS” screen.
Position and time programming
MENU DSC Settings Position Input
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
24
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Distress call
A Distress call should be transmitted if, in the opinion of the
Master, the ship or a person is in distress and requires im-
mediate assistance.
NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A
PERSON IS NOT IN AN EMERGENCY. A DISTRESS
CALL SHOULD BE MADE ONLY WHEN IMMEDIATE
HELP IS NEEDED.
Simple call D
Confi rm no Distress call is being received. q
While lifting up the key cover on the back side of the trans- w
ceiver, hold down [DISTRESS] for 3 seconds to transmit
the Distress call.
While holding down [DISTRESS], count down beeps sound and
both the key and display backlighting blink.
DSC channel (Channel 70) is automatically selected and the
Distress call is transmitted.
NOTE: The distress call is paused for up to 15 seconds
when no valid position data is received. The distress call
is made when a valid position data is received within 15
seconds.
If valid position data cannot be received within 15 seconds, the
distress call is made with a stored position data.
After the call, the transceiver waits for an acknowledgment e
call on channel 70 for 10 seconds, and then waits for a call
by alternately monitoring channel 70 and channel 16.
The Distress call is automatically transmitted every 3.5 to 4.5
minutes, until an acknowledgement is received (‘Call repeat’
mode), or DSC Cancel call is made. (p. 27)
• Push [RESEND] to manually transmit the Distress repeat call.
Push [Ω]/[] then push [INFO] to display the transmitted Dis-
tress call information.
Push [Ω]/[] then push [PAUSE] to pause the ‘Call repeat’ mode,
push [RESUME] to resume it.
After receiving the acknowledgment, push [ALARM OFF] r
then reply using the microphone.
A distress alert default contains:
Nature of distress: Undesignated distress
Position information: The latest GPS or manual input position
is held for 23.5 hours, or until the power is turned OFF.
25
8
DSC OPERATION
N
ew
2001
N
e
w
Regular call D
The nature of the Distress call should be included in the Dis-
tress call.
Enter “DISTRESS CALL in the DSC CALLS menu. q
Select the nature of the distress using [ w Y]/[Z], then push
[ENTER].
‘Undesignated, ‘Fire,Explosion, ‘Flooding, ‘Collision, ‘Grounding,
‘Capsizing, ‘Sinking, ‘Adrift, ‘Abandoning Ship, ‘Piracy’ or ‘Man
Overboard’ is selectable.
The nature of the distress is stored for 10 minutes after a selec-
tion is made.
The Distress call confi rmation screen is displayed. e
• Push [Y]/[Z] to see the hidden lines.
While lifting up the key cover on the back side of the trans- r
ceiver, hold down [DISTRESS] for 3 seconds to transmit
the Distress call.
While holding down [DISTRESS], count down beeps sound and
both the key and display backlighting blink.
The selected nature of the distress is stored for 10 minutes.
MENU DSC Calls Distress Call
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
26
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
After transmitting the call, the transceiver waits for an ac- t
knowledgment call.
The Distress call is automatically transmitted every 3.5 to 4.5
minutes, until an acknowledgement is received (‘Call repeat’
mode), or DSC cancel call is made. (p. 27)
• Push [RESEND] to manually transmit the Distress repeat call.
Push [Ω]/[] then push [INFO] to display the transmitted Dis-
tress call information.
Push [Ω]/[] then push [PAUSE] to pause the ‘Call repeat’ mode,
push [RESUME] to resume it.
After receiving an acknowledgment call, push [ALARM y
OFF] then reply using the microphone.
A distress alert contains:
• Nature of distress : Selected in step w.
• Position information : The latest GPS or manual input position
is held for 23.5 hours, or until the power is
turned OFF.
When no GPS data is received or invalid data is received,
and both position and time have been manually pro-
grammed, the screen as shown below appears. Edit your
latitude and longitude position and UTC time as follows:
Push [CHG], then edit your latitude and longitude posi-
tion and UTC time.
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
27
8
DSC OPERATION
N
ew
2001
N
e
w
Distress cancel call D
While waiting for an acknowledgment call, push [CAN- q
CEL].
Push [CONTINUE]. w
• Push [BACK] to return to waiting for an acknowledgement call.
Push [FINISH]. e
• Push [EXIT] to return to waiting for an acknowledgement call.
The Distress cancel call is transmitted. r
Channel 16 is automatically selected. t
• Report your situation using the microphone.
After the report, push [EXIT] to return to the normal operating
mode.
28
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting DSC calls
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL LEVEL. (p. 68)
Transmitting an individual call D
The Individual call function allows you to transmit a DSC sig-
nal to only a specifi c station.
Enter “INDIVIDUAL CALL in the DSC CALLS menu. q
MENU DSC Calls Individual Call
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
The ID code for the Individual call can be set fi rst. (p. 20)
When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Y]/[Z]/[Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
The fi rst two digits are ‘0’ for any coast station ID.
Select Routine, Safety or Urgency as the desired call type e
using [Y]/[Z], then push [ENTER].
NOTE: When a coast station is selected in step w, the
voice channel is automatically specifi ed by the coast sta-
tion. Therefore, skip step r and go directly to step t.
29
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting an Individual call (continued) D
Select a desired intership channel using [ r Y](CH)/[Z](CH),
then push [ENTER].
Intership channels are already preset into the transceiver in the
recommended order.
A confi rmation screen appears. t
• Confi rm the call contents.
Push [CALL] to transmit the Individual call. y
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
Standby on Channel 70 until an acknowledgement is re- u
ceived.
The transceiver waits on channel 70 for 10 secconds, then alter-
nately monitors channel 70 and the operating channel.
When the acknowledgement ‘Able to comply’ is received, i
beeps sound and the screen below is displayed.
Push [ALARM OFF] to stop the beeps and then select the
intership channel specifi ed in step r.
A different intership channel will be selected if the station you
called cannot use the channel.
• Reply using the microphone. And go to step o.
30
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Or, when the acknowledgement ‘Unable to comply’ is re-
ceived, beeps sound and the screen below is displayed.
Push [ALARM OFF] to stop the beeps. Then push [EXIT]
to return to the operating channel (before you entered the
MENU screen).
After communicating, push [EXIT] to return to the normal o
operating mode.
Transmitting an Individual Acknowledgement D
When receiving an Individual call, you can transmit an ac-
knowledgement (‘Able to Comply, ‘Propose New Channel’ or
‘Unable to Comply’) by using the on-screen prompts (Quick
ACK.) Also, you can send an acknowledgement through the
MENU system (Man ual ACK.)
Quick ACK:
When an Individual call is received, beeps sound and the q
screen below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
31
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting an Individual Acknowledgement (continued) D
Select one of three options, then push [ENTER]. e
• Able to Comply : Make an acknowledgment call without
any changes.
• Unable to Comply : You cannot make a communication.
The Acknowledgement call (‘Unable to
Comply’) can be automatically trans-
mitted, if set. See page 66 for details.
• Propose New Channel : You can make an acknowledgement
call, but you specify the intership chan-
nel. Select a desired intership chan-
nel, using [Y](CH)/[Z](CH), then push
[ENTER].
The Individual ACK confi rmation screen is displayed. r
Push [CALL] to transmit an acknowledgement call.
The screens shown below are displayed. t
Reply to the call using the microphone. y
Push [EXIT] to return to the normal operating mode. u
32
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual ACK:
Enter “INDIVIDUAL ACK” in the DSC CALLS menu. q
MENU DSC Calls Individual ACK
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
When no Individual call has been received, “Individual ACK” item
will not be displayed.
Select a desired individual address or ID code to reply to, w
using [Y]/[Z], then push [ENTER].
Perform steps ee to u, as described in “Quick ACK:, be-
ginning on the previous page.
Transmitting a Group call D
The Group call function allows you to transmit a DSC signal
to only a specifi c group.
Enter “GROUP CALL in the DSC CALLS menu. q
MENU DSC Calls Group Call
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select the desired preprogrammed group address or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
The ID code for the Group call can be set fi rst. (p. 21)
When “Manual Input” is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using [ e Y](CH)/[Z](CH),
then push [ENTER].
Intership channels are already preset into the transceiver in the
recommended order.
33
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Group call (continued) D
About Manual Inputting:
Enter a desired group ID in the following way:
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID.
The fi rst two digits are ‘0’ for any Coast station ID.
A confi rmation screen appears. r
• Confi rm the call contents.
Push [CALL] to transmit the Group call. t
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Group call has been transmitted, the following y
screen is displayed.
Announce the information using the microphone. u
After the announcement, push [EXIT] to return to the nor- i
mal operating mode.
34
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting an All Ships call D
All ships, that have DSC transceiver, use Channel 70 as their
‘listening channel. When you want to announce a message to
these ships within range, use the ‘All Ships Call’ function.
Enter “ALL SHIPS CALL in the DSC CALLS menu. q
MENU DSC Calls All Ships Call
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select a desired category, using [ w Y]/[Z], then push [EN-
TER].
The selectable category may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable categories.
Select a desired traffi c channel, using [ e Y]/[Z], then push
[ENTER].
The selected channel is displayed.
A confi rmation screen appears. r
• Confi rm the call contents.
Push [CALL] to transmit the All Ships call. t
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the All Ships call has been transmitted, the following y
screen is displayed.
Announce the message using the microphone. u
After the announcement, push [EXIT] to return to the nor- i
mal operating mode.
35
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Position Request Call D
Transmit a Position Request Call when you want to know a
specifi c ship’s current position, etc.
Enter “POSITION REQUEST” in the DSC CALLS menu. q
MENU DSC Calls Position Request
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
The ID code for the Position Request Call can be set fi rst. (p. 20)
When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
The fi rst two digits are ‘0’ for any coast station ID.
A confi rmation screen appears. e
• Confi rm the call contents.
36
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Position Request Call. r
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Position Request Call has been transmitted, the t
following screen is displayed.
The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i
37
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Position Report Call D
Transmit a Position Report Call when you want to announce
your own position to a specifi c ship.
Enter “POSITION REPORT” in the DSC CALLS menu. q
MENU DSC Calls Position Report
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
The ID code for the Individual call can be set fi rst. (p. 20)
When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
The fi rst two digits are ‘0’ for any coast station ID.
A confi rmation screen appears. e
• Confi rm the call contents.
38
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Position Report Call. r
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Position Report Call has been transmitted, the t
transceiver automatically returns to the normal operating
mode.
When no GPS data is received or invalid data is received,
and both position and time have been manually programmed,
the screen shown below appears. Edit your latitude and lon-
gitude position and UTC time as follows:
Push [CHG], then edit your latitude and longitude position
and UTC time.
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
39
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Polling Request Call D
Transmit a Polling Request Call when you want to know a
specifi c vessel is in the communication area, or not.
Enter “POLLING REQUEST” in the DSC CALLS menu. q
MENU DSC Calls Polling Request
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push
[ENTER].
The ID code for the Individual call can be set fi rst. (p. 20)
When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
The fi rst two digits are ‘0’ for any coast station ID.
A confi rmation screen appears. e
• Confi rm the call contents.
40
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Polling Request Call. r
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Polling Request Call has been transmitted, the t
following screen is displayed.
The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i
41
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Test call D
Testing on the exclusive DSC distress and safety calling chan-
nels should be avoided as much as possible. When testing on
a distress/safety channel is unavoidable, you should indicate
that these are test transmissions.
Normally the test call would require no further communica-
tions between the two stations involved.
Enter “TEST CALL in the DSC CALLS menu. q
MENU DSC Calls Test Call
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Select a desired preprogrammed individual address, or w
“Manual Input,” then push [ENTER].
The ID code for the Individual call can be set fi rst. (p. 20)
When “Manual Input” is selected, set the 9 digit MMSI ID code for
the individual you wish to call.
About Manual Inputting:
Enter a desired address ID in the following way:
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
The fi rst two digits are ‘0’ for any Coast station ID.
A confi rmation screen appears. e
• Confi rm the call contents.
42
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Test call. r
If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Test call has been transmitted, the following t
screen is displayed.
The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i
43
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Test Acknowledgement call D
When the “TEST ACK” in DSC settings is set to ‘Auto TX’
(p. 66), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When a Test call is received, beeps sound and the screen q
shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confi rmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen r
shown below is displayed, and then returns to the normal
operating mode.
44
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual ACK:
Enter “TEST ACK” in the DSC CALLS menu. q
MENU DSC Calls Test ACK
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
If no Test call has been received, the “TEST ACK” item will not
be displayed.
Select a desired Test call to reply to, using [ w Y]/[Z], then
push [ENTER].
The Test ACK confi rmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen r
shown below is displayed, and then returns to the normal
operating mode.
45
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Position Reply call D
Transmit a Position Reply call when a Position Request call
is received.
When the “POSITION ACK” in DSC Settings is set to ‘Auto
T
X’ (p. 66), the transceiver automatically transmits a reply call
when receiving a Position Request call.
Quick Reply:
When a Position Request call is received, beeps sound q
and the screen shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
• Push [INFO] to display the Position Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Reply confi rmation screen is displayed. e
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
46
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual Reply:
Enter “POSITION REPLY” in the DSC CALLS menu. q
MENU DSC Calls Position Reply
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
If no Position Request call has been received, the “POSITION
REPLY” item will not be displayed.
Select a desired Position Request call to reply to, using w
[Y]/[Z], then push [ENTER].
The Position Reply call confi rmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
When no GPS data is received or invalid data is received,
and both position and time have been manually programmed,
the screen shown below appears. Edit your latitude and lon-
gitude position and UTC time as follows:
Push [CHG], then edit your latitude and longitude position
and UTC time.
• Select a desired number using [Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “ or “,” then push
[ENTER].
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
47
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Position Report Reply call D
Transmit a Position Report Reply call when a Position Report
Request call is received.
Quick Reply:
When a Position Report Request call is received, beeps q
sound and the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
Push [INFO] to display the Position Report Request call informa-
tion.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Report Reply confi rmation screen is dis- e
played.
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
48
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual Reply:
Enter “POSITION REPORT REPLY” in the DSC CALLS q
menu.
MENU DSC Calls Position Report Reply
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
If no Position Report Request call has been received, the “POSI-
TION REPORT REPLY” item will not be displayed.
Select a desired Position Report Request call to reply to, w
using [Y]/[Z], then push [ENTER].
The Position Report Reply call confi rmation screen is dis- e
played.
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
49
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Polling Reply call D
Transmit a Polling Reply call when a Polling Request call is
received.
When the “POSITION ACK” in DSC Settings is set to ‘Auto
TX’ (p. 66), the transceiver automatically transmits a reply call
when receiving a Polling Request call.
Quick Reply:
When a Polling Request call is received, beeps sound and q
the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
• Push [INFO] to display the Polling Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Polling Reply confi rmation screen is displayed. e
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
50
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual Reply:
Enter “POLLING REPLY” in the DSC CALLS menu. q
MENU DSC Calls Polling Reply
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
If no Polling Request call has been received, the “POLLING RE-
PLY” item will not be displayed.
Select a desired Polling Request call to be replied, using w
[Y]/[Z], then push [ENTER].
e
The Polling Reply call confi rmation screen is displayed.
Push [CALL] to transmit the acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
51
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving DSC calls
Receiving a Distress Call D
When a Distress Call is received:
The emergency alarm sounds for 2 minutes.
“RCVD DISTRESS” pops up and the LCD backlight
blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a softkey to select your desired action. w
[IGN]
Push to return to the normal operating mode.
The transceiver exits the DSC mode.
By pushing [PTT], the transceiver also exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information.
(p. 63)
[ACPT]
Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
If you haven’t pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 67)
Push
52
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving a Distress Acknowledgement D
When a Distress Acknowledgement sent to another ship is
received:
The emergency alarm sounds for 2 minutes.
“RCVD DISTRESS ACK” pops up and the LCD backlight
blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a softkey to select your desired action. w
[IGN]
Push to return to the normal operating mode.
The transceiver exits the DSC mode.
By pushing [PTT], the transceiver also exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information
. (p. 63)
[ACPT]
Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
If you haven’t pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 67)
Push
53
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving D a Distress Relay Call
When a Distress Relay call is received:
The emergency alarm sounds for 2 minutes.
“RCVD DISTRESS RELAY” pops up and the LCD back-
light blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a softkey to select your desired action. w
[IGN]
Push to return to the normal operating mode.
The transceiver exits the DSC mode.
By pushing [PTT], the transceiver also exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information.
(p. 63)
[ACPT]
Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
If you haven’t pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 67)
Push
54
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving D a Distress Relay Acknowledgement
When a Distress Relay Acknowledgement is received:
The emergency alarm sounds for 2 minutes.
“RCVD DIST RELAY ACK” pops up and the LCD backlight
blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a softkey to select your desired action. w
[IGN]
Push to return to the normal operating mode.
The transceiver exits the DSC mode.
By pushing [PTT], the transceiver also exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call information. (p. 63)
[ACPT]
Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
If you haven’t pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 67)
Push
55
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving an Individual Call D
When an Individual Call is received:
The alarm sounds for 2 minutes.
“RCVD INDIVIDUAL CALL” pops up. The LCD backlight
may blink for 2 minutes, depending on the received Cat-
egory.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operating
mode.
The transceiver exits the DSC mode.
The Call is stored in the Received Call Log.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informati
on. (p. 63)
[ACK]
Push to display the “INDIVIDUAL ACK” screen to re-
ply to the Call, and select the channel specifi ed by the
calling station for voice communication, depending on
your situation. S
ee page 30 for details of the Individual
Acknowledgement procedure.
When “INDIVIDUAL ACK” is set to “Auto ACK (Unable),
the transceiver automatically replies to the Call. In that
case, both the TX and RX calls are stored in the Transmit-
ted and Received Call Logs.
56
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving a Group Call D
When a Group Call is received:
The alarm sounds for 2 minutes.
“RCVD GROUP CALL pops up. The LCD backlight may
blink for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informa
tion. (p. 63)
[ACPT]
Push to monitor the channel specifi ed by the calling sta-
tion (Example: 08) for an announcement from the call-
ing station.
57
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving an All Ships Call D
When an All Ships Call is received:
The alarm sounds for 2 minutes.
“RCVD ALL SHIPS CALL pops up. The LCD backlight may
blink for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informatio
n. (p. 63)
[ACPT]
Push to monitor the channel specifi ed by the calling sta-
tion (Example: 16) for an announcement from the call-
ing station.
58
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving a Geographical Area Call D
When a Geographical Area Call (for the area you are in) is
received:
The alarm sounds for 2 minutes.
“RCVD GEOGRAPHICAL CALL pops up. The LCD back-
light may blink for 2 minutes, depending on the received
Category.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informatio
n. (p. 63)
[ACPT]
Push to monitor the channel specifi ed by the calling sta-
tion (Example: 08) for an announcement from the call-
ing station.
When no GPS data is received or if there is a problem with
the connected receiver, all Geographical Area Calls are
received, regardless of your position.
59
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving a Position Request Call D
When a Position Request Call is received:
The alarm sounds for 2 minutes.
“RCVD POS REQUEST” pops up. The LCD backlight
blinks for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received
call information. (p. 63)
[ACK]
Push to display the “POSITION REPLY” screen and
send a reply to the Call. (p. 45)
When “POSITION ACK” is set to “Auto TX, the transceiver
automatically replies to the Call. In that case, both the TX
and RX calls are stored in the Transmitted and Received
Call Logs.
60
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving a Position Report Call D
When a Position Report Call is received:
The alarm sounds for 2 minutes.
“RCVD POSITION REPORT” pops up. The LCD backlight
blinks for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[EXIT]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informati
on. (p. 63)
61
8
DSC OPERATION
N
ew
2001
N
e
w
D Receiving a Polling Request call
When a Polling Request call is received:
The alarm sounds for 2 minutes.
“RCVD POLLING REQUEST” pops up. The LCD backlight
blinks for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call informati
on. (p. 63)
[ACK]
Push to display the “POLLING REPLY” screen to reply
to the Call
. (p. 49)
When “POSITION ACK” is set to “Auto TX, the transceiver
automatically replies to the Call. In that case, both the TX
and RX calls are stored in the Transmitted and Received
Call Logs.
62
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving a Test Call
When a Test Call is received:
The alarm sounds for 2 minutes.
“RCVD TEST CALL pops up. The LCD backlight blinks for
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[IGN]
Push to ignore the Call and return to the normal operat-
ing mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
Push to display the Received call infor
mation. (p. 63)
[ACK]
Push to display the “TEST ACK” screen to reply to the
Call. (p. 43)
When “TEST ACK” is set to “Auto TX, the transceiver au-
tomatically replies to the Call. In that case, both the TX and
RX calls are stored in the Transmitted and Received Call
Logs.
63
8
DSC OPERATION
N
ew
2001
N
e
w
Receiving a Test Acknowledgement Call D
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
“RCVD TEST ACK” pops up. The LCD backlight blinks for
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action. w
[EXIT]
Push to return to the normal operating mode.
The transceiver exits the DSC mode.
” continues to blink and the Call is stored in the Received
Call Log.
Received Call log
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
While in the normal operating mode, blinks in the upper right
corner of the LCD when there is an unread message.
Distress message D
Push [LOG] to enter “RCVD CALL LOG” in the DSC CALLS q
menu, or you can enter it through the Menu screen.
MENU DSC Calls Received Call Log
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Push [ w ] or [] to select “Distress,” then push [ENTER].
The Distress messages are stored in “Distress.
appears when there are unread messages.
” appears when there are no unread messages.
• No icon appears when there are no messages.
64
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [ e ] or [] to select the desired item, then push [EN-
TER].
The message in the unopened fi le has not been read.
Push [ r ] or [] to scroll the message contents.
Pushing [WP] stores the received position. (p. 74)
To delete the displayed message, push [DEL]. t
The confi rmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode. y
Other messages D
Push [LOG] to enter “RCVD CALL LOG” in the DSC CALLS q
menu, or you can enter it through the Menu screen.
MENU DSC Calls Received Call Log
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Push [ w ] or [] to select “Others,” then push [ENTER].
The messages other than the Distress are stored in “Others.
appears when there are unread messages.
” appears when there are no unread messages.
• No icon appears when there are no messages.
Push [ e ] or [] to select the desired item, then push [EN-
TER].
The message in the unopened fi le has not been read.
65
8
DSC OPERATION
N
ew
2001
N
e
w
Other messages (Continued) D
Push [ r ] or [] to scroll the message contents.
The stored message has various information, depending on the
DSC call type.
Pushing [WP] stores the received p
osition. (p. 74)
To delete the displayed message, push [DEL]. t
The confi rmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode. y
Transmitted Call log
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter “TX CALL LOG” in the DSC CALLS menu. q
MENU DSC Calls Transmitted Call Log
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
Push [ w ] or [] to select the desired item, then push [EN-
TER].
Push [ r ] or [] to scroll the message contents.
To delete the displayed message, push [DEL]. r
The confi rmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode. t
66
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSC Settings
D Position Input (See page 23)
D Add Individual ID/Group ID (See pages 20 and 21)
D Delete Individual ID/Group ID (See page 22)
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
“Auto TX” or “Manual TX.
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When “INDIVIDUAL ACK” is set to “Auto TX, the trans-
ceiver automatically transmits the Acknowledgment call
including “Unable to Comply” (No Reason Given) after re-
ceiving the Individual call.
q
Enter either “INDIVIDUAL ACK,“POSITION ACK” or “TEST
ACK” in the DSC Settings menu.
MENU
DSC Settings
Individual ACK
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
MENU DSC Settings
Position ACK
MENU DSC Settings
Test ACK
Push [ w ] or []
to select “Auto TX” or “Manual TX, then
push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
(default: Manual)
(default: Auto TX)
(default: Auto TX)
Push [EXIT] to return to the normal operating mode. e
67
8
DSC OPERATION
N
ew
2001
N
e
w
D Channel 16 Switch function
By regulation, after receiving a Distress call, the transceiv-
er switches the operating channel to Channel 16. However,
when this setting is set to “OFF, the function enables the
transceiver to remain on the operating channel, even after
receiving a Distress call.
q Enter “CH 16 SWITCH”
in the DSC Settings menu
.
MENU DSC Settings CH 16 Switch
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [] or [] to set the Channel 16 Switch function to
“Auto (No Delay), “10 Second Delay” or “OFF
,” then push
[ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
(default)
Auto (No Delay) : After receiving a Distress call, and
[ACPT] is pushed on the confirmation
screen, the transceiver immediately
switches to Channel 16.
10 Second Delay : After receiving a Distress call, and
[ACPT] is pushed on the confirma-
tion screen, the transceiver remains
on the current operating channel for
10 seconds. After that, the transceiver
automatically switches to Channel 16.
(default)
OFF : Even after receiving a Distress call,
the transceiver remains on the operat-
ing channel.
appears.
Push [EXIT] to return to the normal operating mode. e
68
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Alarm
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
q Enter “ALARM”
in the DSC Settings menu
.
MENU DSC Settings Alarm
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [] or [] to select
the status, then push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
Safety, “Routine, “Warning, “Self-Terminate” and “Discrete” are
selectable. (default: ON)
Push [ e ] or [] to set the Alarm setting to “ON” or “OFF.
Push [EXIT] to return to the normal operating mode. r
D Channel 70 Squelch level
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels between 1 (loose
squelch) and 10 (tight squelch) and OPEN.
OPEN is completely open.
q Enter “CH 70 SQL LEVEL
in the DSC Settings menu
.
MENU DSC Settings CH 70 SQL Level
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push []/[]/[]/[] to adjust the squelch level until the
noise just disappears, then push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
(default)
Push [EXIT] to return to the normal operating mode. e
69
8
DSC OPERATION
N
ew
2001
N
e
w
D DSC Loop Test
The DSC loop test function sends transmit DSC signals to
the receive AF circuit to compare and check the TX and RX
signals at the AF level.
q Enter “DSC LOOP TEST”
in the DSC Settings menu
.
MENU DSC Settings DSC Loop Test
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [ENTER] to start the DSC loop test.
• Push [BACK] to cancel and return to the DSC Settings menu.
When the transmit DSC and receive DSC signals are matched,
“OK” appears.
Push [EXIT] to return to the normal operating mode. e
If “NG” appears in step w, either or both TX and RX DSC
circuits has a problem. In that case, you will have to send
the transceiver to your nearest dealer for repair.
D Channel 70 Watch function
Select whether or not the transceiver monitors Channel 70.
q Enter “CH 70 Watch”
in the DSC Settings menu
.
MENU DSC Settings CH 70 Watch
(Push [MENU])
(Push
[Y]/[Z]
, then push [ENTER].)
w Push [] or [] to set the Channel 70 Watch function to
“OFF with Power Save, “OFF, “Busy” or “Standby
,” then
push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
(default)
70
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Standby : While receiving no signal, the transceiver moni-
tors Channel 70 according to the Scan Speed
time cycle.
Busy : While receiving no signal on the operating chan-
nel, the transceiver monitors Channel 70 ac-
cording to the Scan Speed time cycle.
While receiving a signal on the operating chan-
nel, the transceiver monitors Channel 70 every
1.5 seconds.
OFF : The transceiver does not monitor Channel 70.
OFF with Power Save
: The transceiver does not monitor Channel 70.
While receiving no signal, the power save func-
tion will be activated.
Push [EXIT] to return to the normal operating mode. e
71
9
OTHER FUNCTIONS
MOB (Man OverBoard)
The transceiver can register an MOB (Man OverBoard*) point
with its position data.
* The situation in which a person has fallen into the water and is in
need of rescue.
To store an MOB point:
Hold down [MOB] for 1 second to store the MOB point. q
• Two beeps sound.
After memorizing the MOB point, the information screen “MAN
OVERBOARD! appears.
If the GPS receiver has not yet calculated the position, the
MOB point cannot be stored.
Only one MOB point can be memorized, and the previously
stored point is overwritten when a new MOB point is stored.
After the information screen appears, push [ENTER] to w
open the MOB screen, then the navigation to the stored
point will start. See page
78 for the navigation details.
If no key operation is performed for 10 seconds, the transceiver
returns to the previous screen. Or push any key to manually
return.
Push [EXIT] to exit the Navigation screen and return to the e
normal operating mode.
72
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
To check the stored MOB point:
Push [MENU] to enter the MENU screen. q
Push w
[]/[] and select “MOB” to enter the MOB screen.
• The MOB screen appears.
Pushing [MOB] on the softkey also opens the screen.
When the MOB point has not been stored, or has been deleted,
a blank screen appears.
Push a softkey to select your desired action e .
Push [EXIT] to return to the normal operating mode.
Push [BACK] to return to the MENU screen.
Starting Navigation to the MOB point: Push [NAV]
The transceiver can navigate to the MOB point.
Push [NAV] to start navigation to the MOB point.
See page 78 for navigation details.
73
9
OTHER FUNCTIONS
MOB (Man Overboard) (Continued)
Editing the MOB point: Push [EDIT]
The stored MOB position can be changed.
Push [EDIT] to enter the position data editing screen. q
Edit specifi c latitude and longitude data in the following w
way:
• Select a desired number using [Y]/[Z]/[Ω]/[].
• Push [ENTER] to set the digit.
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
To set the screen data, select “FINISH,” then push [ENTER].
After the confi rmation screen appears, push [OK] to save e
the position data and return to the MOB screen.
Deleting an MOB point: Push [DEL]
The stored the MOB point can be deleted.
Please note that a deleted MOB point cannot be restored.
Push [DEL] to delete the MOB point. q
• The confi rmation screen “ARE YOU SURE?” appears.
Push [OK] to delete the data and return to the MOB w
screen.
• A blank screen appears.
Push [EXIT] to return to the normal operating mode.
Push [BACK] to return to the MENU screen.
74
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Waypoint
You can store your vessel’s position information wherever you
are, and also the position information of the vessel you re-
ceived a DSC call from, as a waypoint. The transceiver can
store up to 50 waypoints. Each waypoint can be programmed
with an alphanumeric name for easy recognition. Names can
be a maximum of 10 characters.
To store your position:
Hold down [WP] for 1 second to store the waypoint.
• Two beeps sound.
After memorizing the waypoint, the information screen “WAY-
POINT WAS STORED” appears.
If the GPS receiver has not yet calculated the position, the way-
point cannot be stored.
If you have already stored 50 waypoints, the new waypoint can-
not be stored.
To store a received position:
After receiving a DSC call that includes the position informa-
tion, the position can be registered as a waypoint.
Enter “RCVD CALL LOG” in the DSC CALLS menu. q
MENU DSC Calls Received Call Log
(Push [MENU])
(Push
[]/[]
, then push [ENTER].)
Pushing the [LOG] softkey also opens the screen.
Push [ w ] or [] to select “Distress” or “Others, then push
[ENTER].
Push [ e ] or [] to select the desired item, then push [EN-
TER].
Push [WP] to store. r
• The confi rmation screen “STORE WAYPOINT?” appears.
Push [OK] to register the received position as a waypoint. t
If you have already stored 50 waypoints, the new waypoint can-
not be stored.
The received position is stored with its MMSI ID code as the
waypoint name. If the ID code has been programmed in your
Individual address, the position is stored with the name instead
of the ID code.
75
9
OTHER FUNCTIONS
Waypoint (Continued)
To check the stored waypoint:
Push [MENU] to enter the MENU screen. q
Push w
[]/[] to select “Waypoint” to enter the waypoint
list screen.
• The waypoint list screen appears.
Pushing the [WP] softkey also opens the screen.
e
Push []/[] to select the desired waypoint, then push
[ENTER] to open the waypoint screen. Or
push a softkey
on the waypoint list screen to select your desired
action.
Push [ENTER]
Sorting the waypoints: Push [SORT]
The transceiver can sort the waypoints on the waypoint list
screen.
Push [SORT] one or more times to sort your desired way-
point’s order.
The forward or reverse order of the “MMSI/NAME” and forward
or reverse order of the “RNG” (Range) can be selected.
” or “” appears beside the MMSI/NAME or RNG title.
Starting Navigation to the waypoint: Push [NAV]
The transceiver can navigate to the waypoint.
Push [NAV] to start navigation to the waypoint.
See page 78 for navigation details.
76
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Adding the waypoint: Push [ADD]
New waypoints can be manually programmed with a name
and position data.
Push [ADD] to enter the name programming screen. q
• Any one of “WP01” to “WP50” appears as a default name.
If desired, enter a 10 digit name in the following way: w
• Select a desired character using [Y]/[Z]/[Ω]/[].
• Push [ENTER] to set it.
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
• Push [123], [!$?] or [ABC] to select a character group.
After entering the name, select “FINISH” by pushing [ e Y]/
[Z]/[Ω]/[], then push [ENTER] to set it and enter the posi-
tion data editing screen.
The current position data appears on each screen, as the de-
fault.
• Select a desired number using [Y]/[Z]/[Ω]/[].
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
To set the screen data, select “FINISH,” then push [ENTER].
After the confi rmation screen appears, push [OK] to save r
the waypoint and return to the waypoint list screen.
77
9
OTHER FUNCTIONS
Waypoint (Continued)
Editing the waypoint: Push [EDIT]
The stored waypoint name and its position data can be
changed.
Push [EDIT] to enter the name programming screen. q
• The preprogrammed name is displayed.
If desired, enter a 10 digit name as described in the step w of
the previous page.
w
Edit specifi c latitude and longitude data in the following way:
The preprogrammed position data appears on each screen.
• Select a desired number using [Y]/[Z]/[Ω]/[].
• Push [ENTER] to set the digit.
Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
To move the cursor, select either arrow, “” or “,” then push
[ENTER].
To set the screen data, select “FINISH,” then push [ENTER].
After the confi rmation screen appears, push [OK] to save e
the waypoint and return to the waypoint list screen.
Deleting the waypoint: Push [DEL]
The stored waypoint can be deleted.
Please note that a deleted waypoint cannot be restored.
Push [DEL] to delete the waypoint. q
• The confi rmation screen “ARE YOU SURE?” appears.
Push [OK] to delete the waypoint and return to the way- w
point list screen.
78
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Navigation
The Navigation function navigates from your current position
to the specifi ed waypoint (including MOB point).
The MOB point or waypoint has already been registered.
Starting Navigation to the MOB point:
The transceiver can navigate to the MOB point.
Push [MENU] to enter the MENU screen. q
Push w
[]/[] and select “MOB” to enter the MOB screen.
• The MOB screen appears.
Pushing the [MOB] softkey also opens the screen.
Push [NAV] to start navigation to the MOB point. e
Starting Navigation to the waypoint:
Push [MENU] to enter the MENU screen. q
Push w
[]/[] to select “Waypoint” to enter the waypoint
list screen.
• The waypoint list screen appears.
Pushing the [WP] softkey also opens the screen.
e
Push []/[] to select the desired waypoint, then push
[NAV] to start navigation to the waypoint.
79
9
OTHER FUNCTIONS
Navigation (Continued)
Navigation screen description:
Push [DISP] to toggle the display type. Two display types
are selectable.
Push [DISP]
Push [RNG] to open the range setting window, then push
[]/[]/[Ω]/[] to select the desired range.
Eight ranges are selectable. The range shows the radius
of a compass circle.
Push [SEL] to select compass direction from N-UP, W-UP
and AC-UP.
- N-UP : The top is always north.
- W-UP : The top is always the waypoint (your des-
tination).
- AC-UP : The compass is always pointed in your
course heading direction.
• Push [EXIT] to return to the normal operating mode.
Destination Compass direction
Waypoint
COG (Course Over Ground)
SOG (Speed Over Ground)
Distance
Bearing
80
9
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Compass screen
The compass screen displays your vessel’s COG (Course
Over Ground) and SOG (Speed Over Ground) which can be
checked at a glance.
Push [COMP].
• The screen as shown below is displayed.
Push [SEL] to select compass direction between N-UP
and AC-UP.
- N-UP : The top is always north
- AC-UP : The compass is always pointed in your
course heading direction.
• Push [EXIT] to return to the normal operating mode.
Shows compass direction
COG display
SOG display
Your position (Latitude)
Your position (Longitude)
GPS mode*
Sky view
GPS status screen
GPS Status displays the quantity, signal power and position
of the GPS satellites.
Sky view shows the position of visible GPS satellites.
The screen also shows the direction, elevation angle, satellite
numbers and their receiving signal strength status.
Push [MENU] to enter the menu screen. q
Push [ w Y]/[[Z] to select “GPS Status,” then push [ENTER].
• Sky view screen is displayed.
Push [DISP] each time to toggle between the sky view
and satellite signal power screens.
• Push [BACK] to return to the menu screen.
• Push [EXIT] to return to the normal operating mode.
*“ 3D” is displayed when more than 4 satellites are tracked. When
less than 3 satellites are tracked, “2D” is displayed.
81
9
OTHER FUNCTIONS
GPS status screen (Continued)
About the sky view
: Tracking satellite.
: Untracking satellite
Elevation angle 0 degree line
Elevation angle 30 degree line
Elevation angle 60 degree line
Elevation angle 90 degree line
(Zenith)
The image of the satellite
Satellite A
N
W
E
S
Satellite A
Elevation angle 90 degree line (Zenith)
Elevation angle 60 degree line
Elevation angle 30 degree line
Elevation angle 0 degree line
Satellite
number
Satellite numberSatellite signal power
Satellite
signal
power
Satellite signal power screen description
The untracking satellite numbers blink.
82
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Menu screen operation
The Menu screen is used for programming infrequently
changed values, function settings or sending DSC calls.
In addition to this page, se
e pages 84 through 88 for details.
Entering the Menu screen and operation D
Example: Set the channel group to “USA.”
Push [MENU]. q
Push [ w ]/[] to select the root item
(Radio Settings), and then push [EN-
TER].
If [] or [] is continuously held down,
the items are sequentially highlighted.
Push [ e ]/[] to select “CHAN Group,”
and then push [ENTER].
Push [ r ]/[] to select “USA, and
then push [ENTER] to set it.
” is displayed next to “USA.”
t
Push [EXIT] to exit the Menu screen.
Push [CLEAR] or [BACK] to return to
the previous screen.
Menu lists
[CLEAR]
[ENT]
[Y]/[Z]
[BACK]
[EXIT]
[MENU]
[ENTER]
83
10
MENU SCREEN OPERATION
Menu screen items
The Menu screen contains the following items.
DSC Calls D
Item Ref. Item Ref.
• Individual Call p. 28
• Transmitted Call Log
p. 65
• Individual ACK*
1
p. 30
• Position Request p. 35
• Group Call p. 32 • Position Report p. 37
• All Ships Call p. 34 • Polling Request p. 39
• Distress Call p. 24 • Test Call p. 41
• Received Call Log p. 63 • Test ACK*
1
p. 43
DSC Settings D
Item Ref. Item Ref.
• Position Input*
2
p. 23 • CH 16 Switch p. 67
• Individual ID p. 20 • Alarm p. 68
• Group ID p. 21 • CH 70 SQL Level p. 68
• Individual ACK p. 66 • DSC Loop Test p. 69
• Position ACK p. 66 • CH 70 Watch p. 69
• Test ACK p. 66
Radio Settings D
Item Ref. Item Ref.
• Scan Type p.
84 • Channel Group p. 84
• Scan Timer p. 84 • WX Alert p. 85
• Dual/Tri-Watch p. 84
Confi guration D
Item Ref. Item Ref.
• Backlight p. 85 • Noise Cancel p. 86
• Display Contrast p. 85 • Inactivity Timer p. 87
• Key Beep p. 85 • Float 'n Flash p. 88
• Key Assignment p. 86 • Monitor p. 88
• UTC Offset p. 86 • Unit p. 88
*
1
Appears only after receiving a corresponding call.
*
2
Appears only when no GPS information is received.
MMSI/GPS Information D
The transceiver shows the programmed MMSI code and
GPS information.
If the code is not programmed, “NO DSC MMSI” is displayed.
MOB D (See pages 71 to 73 for information)
Waypoint D (See pages 74 to 77 for information)
GPS Status D
(See pages 80 to 81 for information)
84
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Radio Settings items
Scan type D
The transceiver has two scan types; Normal scan and Prior-
ity scan. A Normal scan searches all Favorite channels in the
selected channel group. A Priority scan sequentially searches
all Favorite channels, while monitoring Channel 16.
(Default: Normal Scan)
Scan timer D
The scan resume timer can be selected as a pause (OFF) or
a timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses for 5 seconds and then resumes, even if a signal has
been received on any channel other than Channel 16.
(Default: OFF)
Dual/Tri-watch D
This item can be selected as Dualwatch or Tri-watch. (p. 19)
(Default: Dualwatch)
Channel Group D
A channel group suitable for your operating area can be se-
lected. Depending on the transceiver version, INT, USA or
CAN may be selectable.
(Default: USA)
See
page 12 for details.
• The screen below shows the U.S.A. version.
85
10
MENU SCREEN OPERATION
Radio settings items (Continued)
WX Alert D
A NOAA broadcast station transmits a weather alert tone be-
fore important weather information.
“WX
” blinks until the transceiver is operated after the
transceiver detects the alert.
“WX
” appears instead of “WX” when the function is set
ON.
(Default: OFF)
ON with Scan : The preprogrammed weather channels are
sequentially checked while scanning.
ON : The previously selected (last used) weather
channel is checked while scanning.
OFF : The transceiver does not detect a weather
alert tone.
Confi guration items
Backlight D
The function display and keys can be backlit for better visibil-
ity under low light conditions.
The backlight can be set to 7 levels and OFF. (Default: 4)
Display contrast D
This item adjusts the contrast of the LCD in 8 steps.
Level 1 is the lowest contrast, and level 8 is the highest con-
trast. (Default: 3)
Key Beep D
You can turn OFF beep tones for silent operation, or you can
turn ON the tones to have confi rmation beeps sound when a
key is pushed. (Default: ON)
86
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Key Assignment D
Desired functions can be assigned to the softkeys.
When the “KEY ASSIGNMENT” screen is displayed, push q
[]/[] to select the desired softkey, and then push [EN-
TER].
To return to the default, select “Set default” and then push [EN-
TER].
Push [ e ]/[] to select the option, and then push [ENTER]
to set it.
” is displayed next to the selected option.
UTC Offset D
Set the offset time between the UTC (Universal Time Coordi-
nated) and your local time to between 14:00 and +14:00 (in
1 minute steps). (Default: 00:00)
Noise Cancel D
Set the Noise Cancel function for both receive and transmit.
When the “NOISE CANCEL screen is displayed, push [ q ]/
[] to select “RX” or “TX,” and then push [ENTER].
Push [ w ]/[] to select the option, and then push [ENTER]
to set it.
” is displayed next to the selected option.
Push [EXIT] to exit the Menu screen. e
Push [CLEAR] or [BACK] to return to the previous screen.
87
10
MENU SCREEN OPERATION
Confi guration items (Continued)
• RX
Turn the receive Noise Cancel function ON or OFF.
(Default: OFF)
OFF : Turns OFF the function.
1 :
The Noise Cancel function reduces random noise compo-
nents in the received signal to approximately one half.
2 :
The Noise Cancel function reduces random noise compo-
nents in the received signal to approximately one third.
3 :
The Noise Cancel function reduces random noise compo-
nents in the received signal to approximately one tenth.
• TX
Turn the transmit Noise Cancel function ON or OFF.
(Default: OFF)
OFF : Turns OFF the function.
ON : The Noise Cancel function reduces random noise
components in the transmitted signal to one third.
Inactivity Timer D
Set the inactivity timer to between 1 and 10 minutes (in 1 minute
steps) or OFF for the “Not DSC Related” items, and to between
1 and 15 minutes or OFF for the “DSC Related” items. The count
down alarm sounds 10 seconds before the Inactive timer returns
the current screen to the normal operating screen.
When the “INACTIVITY TIMER” screen is displayed, push q
[]/[] to select “Not DSC Related” or “DSC Related,” and
then push [ENTER].
Push [ w ]/[] to select the option, and then push [ENTER]
to set it.
” is displayed next to the selected option.
Push [EXIT] to exit the Menu screen. e
• Push [CLEAR] or [BACK] to return to the previous screen.
• Not DSC Related
When the LCD displays a screen other than the normal opera-
tion screen, or one not related to the DSC, and no key opera-
tion occurs for this set period, the transceiver automatically
returns to the normal operating screen.
(Default: 10 min)
88
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
• DSC Related
When the LCD displays the screen related to the DSC, and no
key operation occurs for this set period except during distress
operation, the transceiver automatically returns to the normal
operating screen.
(Default: 15 min)
Monitor D
Select the desired Monitor switch action. See page 15 for
details (Monitor function).
Push : The monitor function is activated by holding down
[VOL/SQL] for 1 second. The squelch opens
while holding down the key.
Hold : The monitor function is activated by holding down
[VOL/SQL] for 1 second. The squelch stays open
until any key is pushed.
Unit D
Select either the Nautical Mile or Kilo-Meter format to display
the distance.
Float ’n Flash D
Float ’n Flash function detects that the transceiver has come
in contact with water. When the function activates, LCD back-
light, keys and trim start to blink to make it easy to fi nd the
transceiver even at night or in a dark environment.
Function : Turn the Float 'n Flash function ON or OFF.
(Default: ON)
Auto OFF : Set the Auto OFF time period to between 0
and 30 seconds (in 10 second steps). After
taking the transceiver out of the water, the
LCD backlight keeps blinking during this set
period. (Default: 20 seconds)
Cycle : Set the LCD backlight blinking cycle to 0.5, 1,
2 or 4 seconds. The LCD backlight turns ON
for 0.5 seconds, and then turns OFF for this
set time period. (Default: 0.5 seconds)
Alarm : Select whether or not the alarm sounds while
the LCD backlight, keys and trim blink when
the Float 'n Flash function is activated.
(Default: OFF)
89
11
BATTERY CHARGING
Battery caution
R DANGER! Use and charge only specifi ed Icom battery pack with
Icom radios or Icom chargers. Only Icom battery packs are tested
and approved for use and charge with Icom radios or Icom chargers.
Using third-party or counterfeit battery packs or chargers may cause
smoke, fi re, or cause the battery to burst.
D Battery caution
R DANGER! DO NOT hammer or otherwise impact the battery. Do
not use the battery if it has been severely impacted or dropped, or if
the battery has been subjected to heavy pressure. Battery damage
may not be visible on the outside of the case. Even if the surface
of the battery does not show cracks or any other damage, the cells
inside the battery may rupture or catch fi re.
R DANGER! NEVER use or leave battery pack in areas with tem-
peratures above +60˚C (+140˚F)(+55˚C for Australian version). High
temperature buildup in the battery, such as could occur near fires
or stoves, inside a sun-heated car, or by setting the battery in direct
sunlight may cause the battery to rupture or catch fire. Excessive
temperatures may also degrade battery performance or shorten bat-
tery life.
R DANGER! DO NOT expose the battery to rain, snow, saltwater,
or any other liquids. Never charge or use a wet battery. If the battery
gets wet, be sure to wipe it dry before using. The battery by itself is
not waterproof.
R DANGER! NEVER incinerate a used battery pack since internal
battery gas may cause them to rupture or may cause an explosion.
R DANGER! NEVER solder the battery terminals, or NEVER
modify the battery pack. This may cause heat generation, and the
battery may rupture, emit smoke or catch fi re.
R DANGER! Use the battery only with the transceiver for which it is
specifi ed. Never use a battery with any other equipment, or for any
purpose that is not described in this instruction manual.
R DANGER!
If fl uid from inside the battery gets in your eyes, blind-
ness can result. Rinse your eyes with clean water, without rubbing
them, and see a doctor immediately.
WARNING! Immediately stop using the battery if it emits an abnor-
mal odor, heats up, or is discolored or deformed. If any of these con-
ditions occur, contact your Icom dealer or distributor.
WARNING! Immediately wash, using clean water, any part of the
body that comes into contact with fl uid from inside the battery.
WARNING!
NEVER put the battery in a microwave oven, high-
pressure container, or in an induction heating cooker. This could cause
overheating, a fi re, or cause the battery to rupture.
Misuse of Lithium-ion batteries may result in the follow-
ing hazards: smoke, fi re, or the battery may rupture.
Misuse can also cause damage to the battery or deg-
radation of battery performance.
90
11
BATTERY CHARGING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CAUTION: Always use the battery within the specific temperature
range for the transceiver and the battery itself (–20˚C to +60˚C (-4˚F
to +140˚F) for U.S.A. and EXP versions, and –10˚C to +55˚C for
Australian version). Using the battery out of its specifi c temperature
range will reduce the battery’s performance and battery life. Please
note that the specifi ed temperature range of the battery may exceed
that of the transceiver. In such cases, the transceiver may not work
properly because it is out of its operating temperature range.
CAUTION: Shorter battery life could occur if the battery is left fully
charged, completely discharged, or in an excessive temperature en-
vironment (above +50˚C (+122˚F)) for an extended period of time. If
the battery must be left unused for a long time, it must be detached
from the radio after discharging. You may use the battery until the
remaining capacity is about half, then keep it safely in a cool dry
place with the temperature range as follows:
–20˚C to +50˚C (–4˚F to +122˚F) (within a month)
–20˚C to +35˚C (–4˚F to +95˚F) (within three months)
–20˚C to +25˚C (–4˚F to +77˚F) (within a year)
D Charging caution
Charge the battery pack at least once every six months, even if it
has been not used for a long period of time. The battery pack will
have slowly self-discharged, even though it has not been used. If the
battery pack is left for a long period without being charged, its life
cycle will be shorter, or worse, it will never accept a charge again.
Due to the characteristics of the Li-ion rectangular battery, the
battery pack may change its shape as the charge and discharge
cycles are repeated. This is a normal phenomenon, and it is quite
safe to continue to use the pack, as long as it is properly handled.
However, when the shape of the battery pack is so changed that
the battery pack or battery cover can not be correctly attached to
the transceiver, it is time to replace it with a new one. Otherwise, the
transceiver can be damaged due to the loss of air tightness.
R DANGER! NEVER charge the battery pack in areas with ex-
tremely high temperatures, such as near fires or stoves, inside
a sun-heated car, or in direct sunlight. In such environments, the
safety/protection circuit in the battery will activate, causing the bat-
tery to stop charging.
WARNING! DO NOT charge or leave the battery in the battery char-
ger beyond the specifi ed time for charging. If the battery is not com-
pletely charged by the specifi c time, stop charging and remove the
battery from the battery charger. Continuing to charge the battery
beyond the specifi c time limit may cause a fi re, overheating, or the
battery may rupture.
WARNING! NEVER insert the transceiver (battery attached to the
transceiver) into the charger if it is wet or soiled. This could corrode
the battery charger terminals or damage the charger. The charger is
not waterproof.
CAUTION: DO NOT charge the battery outside of the specified
temperature range: ±0˚C to +45˚C (+32˚F to +113˚F). Icom recom-
mends charging the battery at +20˚C
(+68˚F). The battery may heat
up or rupture if charged out of the specifi ed temperature range, and
battery performance or battery life may be reduced.
91
11
BATTERY CHARGING
Regular charging with the BC-204 + BC-147S D
The BC-204 with BC-147S provides regular charging of the
Li-ion battery pack.
• Charging time: approximately 13 hours.
BC-147S
CP-25 or optional
OPC-515L* (for a
13.8 V power
source) or CP-23L
(for a 12 V cigarette
lighter socket) can
be used instead of
the AC adapter.
Transceiver
Battery
pack
Turn power OFF
CAUTION: NEVER connect the OPC-515L to a power
source using reverse polarity. This will ruin the battery
charger.
White line: Black line
:
*
Regular battery charger
BC-204 installation D
q
w
e
Supplied screws
Supplied screws
To a desktop
To a wall
92
11
BATTERY CHARGING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Optional battery chargers
Rapid charging with the BC-205 + BC-123S D
The optional BC-205 with the BC-123S will provide rapid
charging of the Li-ion battery pack. (Charging time: approxi-
mately 4 hours)
An AC adapter or the OPC-515/CP-23L DC power cable is ad-
ditionally required, and may be supplied with BC-205, depending
on the version.
Rapid charging with the BC-197 + BC-157S D
or OPC-656
The optional BC-197 with the BC-157S will simultaneously
charge up to 6 Li-ion battery packs. The following items are
additionally required. (Charging time: approximately 4 hours)
• Six AD-124 charger adapters.
The OPC-656 DC power cable.
Battery
pack
The charger adapters
are installed in each slot.
The type of the charger
adapter depends on the
version of the BC-197.
Transceiver
Turn power OFF
NEVER transmit near
the BC-197 or the AC
adapter while
charging
(An AC adapter is
not supplied with
some versions.)
AC adapter
(Connect to a DC power supply: 12 to 16 V/at least 7 A)
Status indicator
(each indicator independently functions)
DC power cable (OPC-656)
OPC-656*
DC power cable
*
NEVER reverse the polarity when connecting the power cable to
a power source. This will ruin the battery charger.
Red line : + Black line : _
BC-123S
AC adapter
OPC-515L* (for a
13.8 V power
source) or the
CP-23L (for a 12 V
cigarette lighter
socket) can be used
instead of the AC
adapter.
CAUTION: NEVER connect the OPC-515L to a power
source using reverse polarity. This will ruin the battery
charger.
White line: Black line
:
*
Transceiver
Battery
pack
Turn power OFF
93
11
BATTERY CHARGING
IMPORTANT: Battery charging caution
Ensure the guide tabs on the battery pack are correctly
aligned with the guide rails inside the charger adapter.
(This is an illustration of the BC-204.)
Guide rail
Tabs
94
12
OPTIONAL SPEAKER-MICROPHONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
HM-167 descriptions
NEVER immerse the connector in water. If the connector
becomes wet, be sure to dry it BEFORE attaching it to the
transceiver.
NOTE: The microphone is located near the top of the
speaker-microphone, as shown in the illustration above.
To maximize the readability of your transmitted signal
(voice), hold the microphone approximately 5 to 10 cm
(2 to 4 inches) from your mouth, and speak at a normal
voice level.
Attachment
Turn power OFF before attaching the speaker-microphone.
Then, insert the speaker-microphone’s connector into the
[SP MIC] connector and carefully screw it tight, as shown in
the diagram below. Be careful not to cross-thread the con-
nection.
IMPORTANT: KEEP the transceiver’s [SP MIC] cap attached
when the speaker-microphone is not used. If the cover is not
attached, water will get into the transceiver. Moreover, the
terminals (pins) will become rusty, or the transceiver will
function abnormally if the connector gets wet.
Set the triangle mark K
to the back side.
CAUTION: Attach the speaker-
microphone’s connector securely
to prevent accidental dropping, or
water intrusion in the connector.
Detaching:
Pull up the cap
in the direction
of the arrow to
detach it.
Attaching:
Attach the cap
in the direction
of the arrow
completely.
PTT switch
Push to transmit.
Release to receive.
Microphone
Speaker
Alligator type clip
To attach the speaker-microphone
to your shirt or collar, etc.
Turn the transceiver power OFF
when connecting the HM-167.
95
13
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does
not turn ON.
The Battery is exhausted or over dis-
charged.
The Battery pack is not correctly attached.
Recharge the battery pack.
Correctly attach the battery pack.
p. 89
p. 3
Little or no sound comes
from the speaker.
The squelch level is set too high.
The volume level is set too low.
The speaker has been exposed to water.
Water has entered to [SP/MIC] connector.
Set the squelch to the threshold point.
• Set the volume to a suitable level.
Remove the water with the AquaQuake func-
tion.
Dry [SP/MIC] connector
p. 13
p. 15
Transmitting is impos-
sible
Some channels are programmed for low
power or receive only by regulations.
The battery is exhausted.
The battery is overcharged.
The output power is set to low.
• Change channels.
Recharge the battery pack.
Verify the battery voltage is correct.
Push [HI/LO] to select high power.
p. 11
p. 91
p. 14
Scan does not start. Favorite channels are not programmed. Set the desired channels as Favorite chan-
nels.
p. 18
No beeps sound. Beep tones are turned OFF. Turn the beep tones ON in the CONFIGURA-
TION menu.
p. 85
Distress calls cannot be
transmitted.
MMSI (DSC self ID) code is not pro-
grammed.
Program the MMSI (DSC self ID) code. p. 10
96
14
SPECIFICATIONS AND OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Specifi cations
General D
• Frequency coverage
Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz (USA and EXP versions)
Rx 156.300–162.025 MHz (AUS version)
• Mode :
FM (16K0G3E), DSC (16K0G2B)
Operating temperature range
USA and EXP versions :
–20°C to +60°C (–4°F to +140°F)
AUS version : –10°C to +55°C
Current drain (at 7.4 V) : TX high 1.5 A
(approximately) Max. audio 0.5 A
Power supply requirement :
7.4 V DC nominal (negative ground)
• Frequency stability
USA and EXP versions : ±10 ppm (–20°C to +60°C)
AUS version : ±10 ppm (–10°C to +55°C)
Antenna impedance : 50 ˘ nominal
Dimensions (approximately) :
61.2(W) 141.4(H) 43.2(D)mm
(Projections not included) : 2.4(W)
5.6(H) 1.7(D) inches
Weight (approximately) : 287 g/10.1 oz with BP-275
Transmitter D
Output power
USA and EXP versions : 5 W/1 W
AUS version : 5 W (approximately)/1 W
• Modulation system : Variable reactance frequency
modulation
Max. frequency deviation : ±5.0 kHz
Adjacent channel power : 70 dB
Spurious emissions (typical)
USA and EXP versions : –68 dBc
AUS version : 0.25 µW
Receiver D
• Sensitivity (typical)
USA and EXP versions : 0.25 µV (12 dB SINAD)
AUS version : –5 dBµ emf (20 dB SINAD)
Squelch sensitivity (at threshold, typical)
USA and EXP versions : 0.35 µV
AUS version : –6 dBµ emf
Intermodulation rejection ratio
USA and EXP versions : 70 dB (typical)
AUS version : 65 dB
Spurious response rejection ratio
:
USA and EXP versions : 70 dB (typical)
AUS version : 65 dB
Adjacent channel selectivity :
USA and EXP versions : 70 dB (typical)
AUS version : 65 dB
Audio output power (at 10% distortion with an
8 ˘ load)
USA and EXP versions
:
0.35 W typical (External)
: 0.7 W typical (Internal)
AUS version : 0.2 W (External)
: 0.7 W typical at 1 kHz (Internal)
All stated specifi cations are subject to change without notice
or obligation.
97
14
SPECIFICATIONS AND OPTIONS
Options
BP-275 Li-ion BATTERY PAC K
Battery pack Voltage Capacity Battery life*
BP-275 7.4 V
1500 mAh (min.)
1590 mAh (typ.)
8 hrs.
*
The operating periods are calculated under the following
conditions;
TX : RX : Standby = 5 : 5 : 90 (
Power save : OFF)
BC-204
REGULAR CHARGER + BC-147S AC ADAPTER
Used for regular charging of battery pack.
(Charging time: approximately 13 hours)
BC-205
RAPID CHARGER + BC-123S AC ADAPTER
For rapid charging of battery pack.
(Charging time: approximately 4 hours)
BC-197
RAPID CHARGER + BC-157S AC ADAPTER
For rapid charging of 6 battery packs.
(Charging time: approximately 4 hours)
CP-25/CP-23L
CIGARETTE LIGHTER CABLE
For charging with the BC-204 or BC-205 charger through a 12 V
cigarette lighter socket.
(CP-25 for BC-204 : CP-23L for BC-205)
• OPC-515L/OPC-656
DC POWER CABLE
For charging of the battery packs using a 12 V DC power source
instead of the AC adapter.
(OPC-515L for BC-204 and BC-205 : OPC-656 for BC-197)
Approved Icom optional equipment is designed for optimal perfor-
mance when used with an Icom transceiver. Icom is not responsible
for the destruction or damage to an Icom transceiver in the event
the Icom transceiver is used with equipment that is not manufac-
tured or approved by Icom.
HM-167
SPEAKER MICROPHONE
Full sized waterproof speaker-microphone including alligator type
clip to attach to your shirt or collar.
FA-SC59V
ANTENNA
MB-109 BELT CLIP
MB-96F LEATHER BELT HANGER
98
15
VHF MARINE CHANNEL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NOTE: Simplex channels, 3, 21, 23, 61, 64, 81, 82 and 83 CANNOT
be lawfully used by the general public in U.S.A. waters.
*
1
Low power only.
*
2
Australian version only
Channel number Frequency (MHz)
03 156.150 160.75003
03A 156.150 156.150
156.200 160.80004
02 156.100 160.70002
04A 156.200 156.200
156.250 160.85005
05A 05A 156.250 156.250
06 06 156.300 156.30006
156.350 160.95007
07A 07A 156.350 156.350
08 08 156.400 156.40008
09 09 156.450 156.45009
10 10 156.500 156.50010
11 11 156.550 156.55011
12 12 156.600 156.60012
13*
1
13*
1
156.650 156.650
13
14 14
156.700 156.700
14
15*
1
15*
1
156.750 156.750
15*
1
16 16
156.800 156.800
16
17*
1
17*
1
156.850 156.850
17
156.900 161.500
18
18A 18A
156.900 156.900
156.950 161.550
19
19A 19A 156.950 156.950
20 20*
1
157.000 161.60020
20A 157.000 157.000
01A 156.050 156.050
USA
01
156.050 160.65001
CAN
Transmit Receive
INT
Channel number Frequency (MHz)
157.100 161.70022
22A 22A 157.100 157.100
23 157.150 161.75023
21b Rx only 161.650
23A 157.150 157.150
24 24 157.200 161.80024
25 25 157.250 161.85025
25b Rx only 161.850
26 26 157.300 161.90026
27 27 157.350 161.95027
28 28 157.400 162.00028
28b Rx only 162.000
60 156.025 160.62560
156.075 160.67561
61A 61A 156.075 156.075
156.125 160.72562
62A 156.125 156.125
156.175 160.77563
63A 156.175 156.175
64 156.225 160.82564
64A 64A 156.225 156.225
156.275 160.87565
65A 65A 156.275 156.27565A
156.325 160.92566
66A 66A*
1
156.325 156.32566A
67*
1
67 156.375 156.37567
21A 21A 157.050 157.050
USA
21 157.050 161.65021
CAN
Transmit Receive
INT
Channel number Frequency (MHz)
71 71 156.575 156.57571
72 72 156.625 156.62572
73 73 156.675 156.67573
70 70 RX only 156.52570
74 74 156.725 156.72574
75*
1
75*
1
156.775 156.77575*
1
76*
1
76*
1
156.825 156.82576*
1
77*
1
77*
1
156.875 156.87577
156.925 161.52578
78A 78A 156.925 156.925
156.975 161.57579
79A 79A 156.975 156.975
157.025 161.62580
80A 80A 157.025 157.025
157.075 161.67581
81A 81A 157.075 157.075
157.125 161.72582
82A 82A 157.125 157.125
83 157.175 161.77583
83A 83A 157.175 157.175
83b Rx only 161.775
84 84 157.225 161.82584
84A 157.225 157.225
85 85 157.275 161.87585
85A 157.275 157.275
86 86 157.325 161.92586
69 69 156.475 156.47569
68
USA
68 156.425 156.42568
CAN
Transmit Receive
INT
Channel number Frequency (MHz)
88 88 157.425 162.02588
88A 157.425 157.425
161.975 161.975A1*
2
87A 157.375 157.375
162.025 162.025A2*
2
87 87 157.375 161.97587
86A
USA
157.325 157.325
CAN
Transmit Receive
INT
Frequency (MHz)
RX only 162.425
RX only 162.450
RX only 162.500
RX only 162.475
RX only 162.525
RX only 161.650
RX only 161.775
RX only 163.275
RX only 162.400
RX only 162.550
Transmit Receive
WX channel
4
5
6
3
7
8
9
10
2
1
99
16
SAFETY TRAINING INFORMATION
Your Icom radio generates RF electromagnetic energy during
transmit mode. This radio is designed for and classified as
“General Population Use” in an uncontrolled environment.
This radio has been evaluated for compliance at the distance
of 2.5 cm (1 inch) with the FCC RF exposure limits for “
Gen-
eral Population Use.
In addition, your Icom radio complies
with the following Standards and Guidelines with regard to RF
energy and electromagnetic energy levels and evaluation of
such levels for exposure to humans:
FCC OET Bulletin 65 Edition 01-01 Supplement C, Evaluating Compli-
ance with FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard
for Safety Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recom-
mended Practice for the Measurement of Potentially Hazardous Electro-
magnetic Fields– RF and Microwave.
The following accessories are authorized for use with this product. Use of
accessories other than those specifi ed may result in RF exposure levels
exceeding the FCC requirements for wireless RF exposure.; Belt Clip
(MB-109), Rechargeable Li-ion Battery Pack (BP-275).
To ensure that your expose to RF electromagnetic en-
ergy is within the FCC allowable limits for general popu-
lation use, always adhere to the following guidelines:
DO NOT operate the radio without a proper antenna attached, as this
may damaged the radio and may also cause you to exceed FCC RF ex-
posure limits. A proper antenna is the antenna supplied with this radio by
the manufacturer or antenna specifi cally authorized by the manufacturer
for use with this radio.
DO NOT transmit for more than 50% of total radio use time (“50% duty
cycle”). Transmitting more than 50% of the time can cause FCC RF expo-
sure compliance requirements to be exceeded. The radio is transmitting
when the “transmit indicator” appears on the LCD. You can cause the
radio to transmit by pressing the “PTT” switch.
ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body
when transmitting and only use the Icom belt clip which is listed on
page 97 when attaching the radio to your belt, etc., to ensure FCC RF
exposure compliance requirements are not exceeded. To provide the re-
cipients of your transmission the best sound quality, hold the antenna at
least 5 cm (2 inches) from your mouth, and slightly off to one side.
The information listed above provides the user with the information needed
to make him or her aware of RF exposure, and what to do to assure that this
radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, your Icom radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interference,
turn off the radio in areas where signs are posted to do so. DO NOT operate
the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
WARNING
CAUTION
100
16
SAFETY TRAINING INFORMATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Votre radio Icom produit une énergie électromagnétique
de radiofréquences (RF), en mode de transmission. Elle
est conçue pour une «utilisation grand public», dans un
environnement non contrôlé. Cet appareil a été évalué et
jugé conforme, à 2,5 cm, aux limites d'exposition aux RF de
la FCC, pour une «utilisation grand public». En outre, votre
radio Icom satisfait les normes et directives qui suivent en
matière de niveaux d'énergie et d'énergie électromagnétique
de RF et d'évaluation de tels niveaux en ce qui concerne
l'exposition humaine :
Supplément C, édition 01-01, du Bulletin OET de la FCC, «Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields».
Norme de l’American National Standards Institute (ANSI) : IEEE C95.1-
1992 sur les niveaux de sécurité compatibles avec l’exposition humaine aux
champs électromagnétiques de radiofréquences (3 kHz à 300 GHz).
Norme de l’ANSI : IEEE C95.3-1992 sur la méthode d’évaluation recomman-
e du champ magnétique potentiellement dangereux des radiofréquences
et des micro-ondes.
Les accessoires qui suivent sont approuvés pour une utilisation avec ce
produit. L'utilisation d'accessoires autres que ceux précisés peut entraîner
des niveaux d'exposition aux RF supérieures aux limites établies par la
FCC en matière d'exposition aux RF sans fi l; attache pour ceinture (MB-
109), bloc-piles rechargeable au lithium-ion (BP-275).
CAUTION
Afin de vous assurer que votre exposition à une
énergie électromagnétique de RF se situe dans les
limites permises par la FCC pour une utilisation grand
public, veuillez en tout temps respecter les directives
suivantes :
NE PAS faire fonctionner la radio sans qu'une antenne appropriée y soit
fixée, car ceci risque d'endommager la radio et causer une exposition
supérieure aux limites établies par la FCC. L'antenne appropriée est celle
qui est fournie avec cette radio par le fabricant ou une antenne spécialement
autorisée par le fabricant pour être utilisée avec cette radio.
NE PAS émettre pendant plus de 50% du temps total d'utilisation de
l'appareil («50% du facteur d'utilisation»). Émettre pendant plus de 50% du
temps total d'utilisation peut causer une exposition aux RF supérieure aux
limites établies par la FCC. La radio est en train d’émettre lorsque le témoin
du mode de transmission s'affi che sur l'écran ACL. La radio émettra si vous
appuyez sur le bouton du microphone.
TOUJOURS tenir l'antenne éloignée d'au moins 2,5 cm de votre corps
au moment d'émettre et utiliser uniquement l'attache pour ceinture Icom
illustrée à la
p. 97, lorsque vous attachez la radio à votre ceinture, ou à autre
chose, de façon à vous assurer de ne pas provoquer une exposition aux RF
supérieure aux limites fi xées par la FCC. Pour offrir à vos interlocuteurs la
meilleure qualité de transmission possible, tenez l'antenne à au moins 5 cm
de votre bouche et légèrement de côté.
Les renseignements ci-dessus fournissent à l'utilisateur toute l'information
nécessaire sur l'exposition aux RF et sur ce qu'il faut faire pour assurer que
cette radio fonctionne en respectant les limites d'exposition aux RF établies
par la FCC.
Interférence électromagnétique et compatibilité
En mode de transmission, votre radio Icom produit de l'énergie de RF qui
peut provoquer des interférences avec d'autres appareils ou systèmes. Pour
éviter de telles interférences, mettez la radio hors tension dans les secteurs
où une signalisation l’exige. NE PAS faire fonctionner l'émetteur dans des
secteurs sensibles au rayonnement électromagnétique tels que les hôpitaux,
les aéronefs et les sites de dynamitage.
AVERTISSEMENT
MISE EN GARDE
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7023D-1EX
Printed in Japan
© 2012 Icom Inc.
Printed on recycled paper with soy ink.
86

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-M92D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-M92D in de taal/talen: Engels als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info