13
5
SCAN OPERATION
■ Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear the tag for unwanted channels.
Non-tag channels will be skipped during scanning. Tag chan-
nels can be assigned to each channel group (INT, USA*
1
,
ATIS*
2
) independently.
q Select the desired channel group (INT, USA*
1
, ATIS*
2
) by
pushing [DIAL] for 1 sec., if desired.
*
1
U.K. version only, *
2
German version only
w Select the desired channel to set as a tag channel.
e Push both [Y] and [Z] for 1 sec. to set the displayed chan-
nel as a tag channel.
•“ ” appears in the function display.
r To cancel the tag channel setting, push both [Y] and [Z]
for 1 sec.
•“ ” disappears.
✔ Clearing all tag channels in the selected channel group
While pushing and holding both [Y] and [Z], turn power ON
to clear all tag channels in the channel group.
■ Starting a scan
Set the priority scan function, scan resume timer and auto
scan function in advance, using the SET mode. (p. 17)
q Select the desired channel group (INT, USA*
1
, ATIS*
2
) by
pushing [DIAL] for 1 sec., if desired.
*
1
U.K. version only, *
2
German version only
w Push [SCAN•DUAL] to start priority or normal scan.
•“SCAN” blinks in the function display.
•“16” appears on the sub channel readout during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to scan resume
timer setting. (Channel 16 is still monitored during priority scan.)
• Push [Y]/[Z] to check the scanning tag channels, change the
scanning direction or resume the scan manually.
e To stop the scan, push [SCAN•DUAL].
•“SCAN” disappears.
• Pushing [PTT], [16•C] or [DIAL] also stops the scan.
[Example]: Starting a normal scan.
Scan starts.
and audio is emitted.
