67
13
HM-127 REMOTE-CONTROL MICROPHONE
■ Call channel programming
q Push [CH/WX•U/I/C] several times
while pushing [H/L] to select the
desired channel group (USA, INT,
CAN) to be programmed.
w Push [16•9] for 1 sec. to select the
call channel of the selected chan-
nel group.
•“CALL” and call channel number ap-
pear.
e Push [16•9] again for 3 sec. (until a
long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
•Call channel number and channel
group to be programmed flashes.
r Push [Y]/[Z] to select the desired
channel.
t Push [16•9] to program the dis-
played channel as the call channel.
• The call channel number and channel
group stop flashing.
■ Optional voice scrambler
operation
DD
Activating the scrambler
q Select an operating channel, except for Channel 16, Chan-
nel 70 or weather channels.
w Push [LO/DX•IC•SCR] while
pushing [H/L] to turn the
voice scrambler function ON.
• “SCRM” appears.
e To turn the scrambler func-
tion OFF, repeat step w.
• “SCRM” disappears.
DD
Programming scramble codes
There are 32 codes (01 to 32) available with the UT-112 for
programming. In order to understand one another, all trans-
ceivers in your group must have the same scrambler code.
The scrambler code is programmed in set mode. See pgs.
13, 47 for details.
