670369
10
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
2
ACCESSORIES ATTACHMENTS
2
Supplied accessories
Attachments
Antenna
Connect the supplied antenna to the antenna connector.
CAUTION:
•NEVER carry the transceiver
by holding just the antenna.
•Transmittingwithoutan
antenna can damage the
transceiver.
Handstrap
Pass the handstrap through
the loop on the back side of
the transceiver to make it
easy to carry.
Belt clip
Attach or detach the belt clip.
Handstrap
Belt clip
Antenna
(5 V/1 A)
Power adapter*
*Not supplied, or the shape is different, depending
on the transceiver version.
To attach the belt clip
To detach the belt clip
Be careful!
Don’t break your
fingernail.
q
Belt clip
w
Lift the tab up (q), and slide
the belt clip in the direction
of the arrow (w).
For Reference: Charging with other power sources
NOTE: Charging with these power sources is not
guaranteed. Icom is not responsible for the destruction or
damage to charging with these power sources.
Charging time differs, depending on the power supply.
3
2
ACCESSORIES ATTACHMENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Charging with the supplied power adapter
Turn OFF the power. q
Connect the power adapter as shown below. w
•"CHG"isdisplayedandbarsinsideofthebatteryiconscroll
while charging.
•Whenerrorisdetected,thebatteryiconblinks,and"Er"and
"CHG"aredisplayed.
The charging is completed in approximately 3 hours. e
•Thechargingtimediffersdependingonthebatterycondition.
•"FL"isdisplayedwhenthebatteryhasbeenfullycharged.
IMPORTANT:
•ReadSection8(Pages22to24)beforecharging.
•Beforeusingthetransceiverforthersttime,fully
charge the battery for optimum life and operation.
•TurnOFFthepowerwhilechargingtoavoiddamageto
the battery.
Charging
Supplied
power adapter
[CHARGE] SOCKET
Power OFF
Slide the lock down.
Pull the cover down.
• PC’S USB port
A-Micro-B USB cable
(user supplied)
Some PCs may not supply
the required voltage and current.
• Micro-B USB type charger*
External battery
Power adapter
Cigarette lighter socket
with power converter
*5 V, 1 A must be supplied.
• PC’S USB port
A-Micro-B USB cable
(user supplied)
Some PCs may not supply
the required voltage and current.
• Micro-B USB type charger*
External battery
Power adapter
Cigarette lighter socket
with power converter
*5 V, 1 A must be supplied.
Set mode entry
The Set mode is used to select option for the transceiver's
functions.
Set mode operation
Turn OFF the power. q
w While holding down [VOL/SQL], turn ON the power to
enter the Set mode.
•Thestartingitem“bEEP”appears.
e While holding down [VOL/SQL], push [Y] or [Z] to select
an item.
Push r [Y] or [Z] to select an item option.
Push t [16/C] to exit the Set mode.
17
7
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SET MODE ITEMS (The chart shows the default settings. Default values differ, depending on the transceiver version.)
• Auto scan**
Starting item
• Beep tone
• Scan resume timer**
• Dual/Tri-watch**
• Automatic
backlighting
Power save
• Float Alert
• Automatic AquaQuake
• LCD contrast
• Monitor key action
• Priority scan**Weather Alert*
: Hold down
**Not available in the HOL version.*For USA, EXP, CHN and AUS versions.
+
: Hold down
Push only
Or
+
18
7
SET MODE
Set mode items
Beep Tone function “bEEP”
Turn the key touch beep sound ON or OFF.
•OFF: Forsilentoperation.
•ON: Abeepsoundswhenakeyispushed.
Weather Alert function “ALrt”
(For USA, EXP, CHN and AUS versions)
When this function is turned ON and the transceiver detects
a weather alert tone, the WX
icon blinks and a beep
sounds. (The blinking stops when another key is pushed.)
The currently selected weather channel is monitored even
while receiving another channel (when the Power Save
function is ON) or during a scan.
Priority Scan function “Prio”
(Not available in the HOL version)
The transceiver has 2 scan types — “Normal” and “Priority.
•OFF:Anormalscan,whichsearchesallFavoritechannels
in the selected channel group.
•ON: Apriorityscan,whichsequentiallysearchesall
Favorite channels while monitoring Channel 16.
Scan resume timer “S_ti”
(Not available in the HOL version)
Select a scan resume timer option.
•OFF: Whenasignalisreceived,thescanpausesonthe
channel until the signal disappears.
•ON: Whenasignalisreceived,thescanpausesonthe
channel for 5 seconds, and then resumes.
Push
Key touch beep is ON
(default)
Key touch beep is OFF
Weather alert is OFF
(default)
Weather alert is ON
Push
Push
Normal scan (default*) Priority scan
*Default value differs, depending on the transceiver version.
Scan resume timer OFF
(default)
Scan resume timer ON
Push
Auto Scan function “Auto”
(Not available in the HOL version)
The Auto Scan function automatically starts a normal or
priority scan when no signal is received, and no operation is
performedfor30seconds.
Dual/Tri-watch function “dt”
(Not available in the HOL version)
Set the watch type to Dualwatch or Tri-watch.
•d-: Dualwatch.
•t-: Tri-watch.
Monitor key action “SqLS”
The monitor key momentary activates the Monitor function.
Select a key action option.
•Pu(PUSH): TheMonitorfunctionisactivatedwhile
holding down [MONI] (VOL/SQL) for more
than 1 second. The squelch function is
canceled while holding down the key.
•Ho(HOLD): TheMonitorfunctionisactivatedbyholding
down [MONI] (VOL/SQL) for more than 1
second.
The squelch function is canceled until
[MONI] (VOL/SQL) is pushed again.
19
7
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Auto scan OFF (default) Auto scan ON
Push
Dualwatch function
(default)
Tr i-watch function
Push
Push setting (default)
Hold setting
Push
20
7
SET MODE
Set mode items (Continued)
Automatic backlighting “A_bL
This function is convenient for the operation in low light. The
backlight can be turned ON or OFF.
•Thebacklightisautomaticallyactivatedwhenyoupushanykey
other than [PTT].
•ThebacklightisautomaticallyturnedOFFafter5secondsof
inactivity.
LCD contrast setting “Lcdc”
Set the LCD contrast level to High or Low.
The LCD contrast level has little effect during indoor use.
Power Save function “P_SA”
The Power Save function reduces current drain by
periodically turning OFF the receiver circuit.
•OFF: ThefunctionisturnedOFF.
•ON: Whennosignalisreceived,andnooperationis
performed for 5 seconds, the receiver circuit is
periodically turned OFF.
Backlightng ON (default)
Backlighting OFF
Push
High contrast (default)
Low contrast
Push
Power Save ON
(default)
Power Save OFF
Push
MEMO
MEMO
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Icom-IC-M25Euro

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-M25Euro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-M25Euro in de taal/talen: Engels als bijlage per email.

De handleiding is 5,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info