670361
8
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
iF70DT/DS
VHF TRANSCEIVER
iF70T/S
iF80DT/DS
UHF TRANSCEIVER
iF80T/S
The photo shows the IC-F70DT/T or
IC-F80DT/T.
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page a (1,1)
i
EXPLICIT DEFINITIONS
WORD DEFINITION
RWARNING
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL This
instruction manual contains important operating instructions
for the IC-F70DT/F70DS/F70T/F70S VHF TRANSCEIVERS
and IC-F80DT/F80DS/F80T/F80S UHF TRANSCEIVERS.
IMPORTANT
Icom, Icom Inc. and the logo are registered trademarks of Icom
Incorporated (Japan) in the United states, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
ABOUT APCO PROJECT 25
This device made under license under one or more of the fol-
lowing US patents: #4,590,473, #4,636,791, #5,148,482,
#5,185,796, #5,271,017, #5,377,229.
The IMBE™ voice coding Technology embodied in this prod-
uct is protected by intellectual property rights including patent
rights, copyrights and trade secrets of Digital Voice Systems,
Inc. This voice coding Technology is licensed solely for use
within this Communications Equipment. The user of this
Technology is explicitly prohibited from attempting to decom-
pile, reverse engineer, or disassemble the Object Code, or in
any other way convert the Object Code into a human-readable
form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084, #5,195,166.
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page i (1,1)
ii
R CAUTION! NEVER hold the transceiver so that the
antenna is very close to, or touching exposed parts of the
body, especially the face or eyes, while transmitting. The
transceiver will perform best if the microphone is 5 to 10 cm
(2 to 4 in.) away from the lips and the transceiver is vertical.
R CAUTION! NEVER operate the transceiver with a
headset or other audio accessories at high volume levels.
R CAUTION! NEVER short the terminals of the bat-
tery pack.
DO NOT push PTT when not actually desiring to transmit.
AVOID using or placing the transceiver in direct sunlight or
in areas with temperatures below –30°C (–22°F) or above
+60°C (+140°F).
The basic operations, transmission and reception of the trans-
ceiver are guaranteed within the specified operating temper-
ature range. However, the LCD display may not be operate
correctly, or show an indication in the case of long hours of
operation, or after being placed in extremely cold areas.
DO NOT modify the transceiver for any reason.
Optional unit installation should be done at authorized Icom
service center only.
The waterproof capability of the transceiver cannot be guar-
anteed if you install an unit yourself, or have it done at a non-
authorised dealer/service center.
BE CAREFUL! The IC-F70/F80 series transceivers
employ waterproof construction, which corresponds to IPX
waterproof specification, Grade 7 (1 m depth for 30 min.).
However, once the transceiver has been dropped, water-
proofing cannot be guaranteed due to the fact that the trans-
ceiver may be cracked, or the waterproof seal damaged, etc.
For U.S.A. only
CAUTION: Changes or modifications to this transceiver, not
expressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
PRECAUTIONS
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page ii (1,1)
iii
TABLE OF CONTENTS
IMPORTANT .................................................................................... i
EXPLICIT DEFINITIONS ................................................................. i
ABOUT APCO PROJECT 25 ........................................................... i
PRECAUTIONS .............................................................................. ii
TABLE OF CONTENTS .................................................................. iii
1 ACCESSORIES ..................................................................... 1–3
Supplied accessories ............................................................. 1
Accessory attachments .......................................................... 1
2 PANEL DESCRIPTION ........................................................ 4–11
Front panel ............................................................................. 4
Function display ..................................................................... 6
Programmable function keys .................................................. 7
3 BASIC OPERATION .......................................................... 12–18
Turning power ON ................................................................ 12
Channel selection ................................................................. 12
Call procedure ...................................................................... 13
Receiving and transmitting ................................................... 13
User set mode ...................................................................... 17
Scrambler function ............................................................... 18
4 BIIS OPERATION .............................................................. 19–29
Default setting ...................................................................... 19
Receiving a call .................................................................... 19
Transmitting a call ................................................................ 21
Receiving a message ........................................................... 23
Transmitting a status ............................................................ 25
Transmitting an SDM (Short Data Message) ........................ 26
Position data transmission ................................................... 27
Printer connection ................................................................ 28
Digital ANI ............................................................................ 28
Auto emergency transmission .............................................. 28
Stun function ........................................................................ 28
BIIS indication ...................................................................... 29
Priority A channel selection .................................................. 29
5 BATTERY CHARGING ...................................................... 30–32
Battery charging ................................................................... 30
Battery caution ..................................................................... 30
Optional battery chargers ..................................................... 31
6 BATTERY CASE ..................................................................... 33
Optional battery case (BP-237) ............................................ 33
7 SWIVEL BELT CLIP .......................................................... 34–35
MB-93 contents .................................................................... 34
To attach ............................................................................... 34
To detach .............................................................................. 35
8 SPEAKER-MICROPHONE ...................................................... 36
Optional HM-138 description ................................................ 36
Attachment ........................................................................... 36
9 OPTIONS ........................................................................... 37–39
10 SAFETY TRAINING INFORMATION ................................ 40–41
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page iii (1,1)
1
1
ACCESSORIES
1
Supplied accessories
The following accessories are supplied: Qty.
q Flexible antenna ……………………………………………1
w Battery pack …………………………………………………1
e Belt clip ………………………………………………………1
r Connector cover (with screw) …………………………1 set
Accessory attachments
D Flexible antenna
Connect the supplied flexible anten-
na to the antenna connector.
CAUTION!
NEVER HOLD by the antenna
when carrying the transceiver.
Transmitting without an antenna
may damage the transceiver.
qwe
r
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 1 (1,1)
2
1
ACCESSORIES
ï Battery pack
To attach the battery pack:
Slide the battery pack in the direction of the arrow (q), then
lock it with the battery release button.
• Slide the battery pack until the battery release button makes a ‘click’
sound.
To release the battery pack:
Slide the battery release button in the direction of the arrow
(w) as shown below. The battery pack is then released.
NEVER release or attach the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the
transceiver being damaged.
D Belt clip
To attach the belt clip:
q Release the battery pack if it is attached.
w Slide the belt clip in the direction of the arrow until the belt
clip is locked and makes a ‘click’ sound.
To detach the belt clip:
q Release the battery pack if it is attached.
w Pinch the clip (q), and slide the belt clip in the direction of
the arrow (w).
q
w
q
w
Battery release button
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 2 (1,1)
3
1
ACCESSORIES
1
ï Connector cover
Attach the connector cover when the optional speaker-micro-
phone is not used.
q
w
e
r
Multi-
connector
Connector
cover
To attach the connector
cover:
q Insert the connector cover
into the multi-connector.
w Tighten the screw.
To detach the connector
cover:
e Unscrew the screw using
a phillips screwdriver.
r Detach the connector
cover for the speaker-
microphone connection.
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 3 (1,1)
4
2
PANEL DESCRIPTION
Front panel
q VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjusts the audio
level.
w ROTARY SELECTOR
Rotate to select the pre-programmed memory channels or
the operating zone.
(Depending on the pre-setting)
e ANTENNA CONNECTOR
Connects the supplied antenna.
r EMERGENCY SWITCH
Push and hold for a specied period to transmit an emer-
gency call.
Desired function can be programmed by your dealer. (p. 7)
t BUSY/TRANSMIT INDICATOR
Lights green while receiving a signal, or when the
squelch is open.
Lights red while transmitting.
y MULTI-CONNECTOR
Connect the optional speaker-microphone.
u FUNCTION DISPLAY (p. 6)
Displays a variety of information, such as an operating
channel number/name, 5-tone code, DTMF numbers and
audible condition, etc.
i DEALER-PROGRAMMABLE KEYS
Desired functions can be programmed independently by
your dealer. (p. 7)
Connector cover
NOTE: Attach the connec-
tor cover when the optional
speaker-microphone is not
used. (See p. 3 for details)
q
!2
!1
!0
w
e
r
t
Speaker
Microphone
o
y
u
i
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 4 (1,1)
5
2
PANEL DESCRIPTION
2
o 10-KEYPAD (IC-F70DT/F70T or IC-F80DT/F80T only)
The keypad allows you to enter digits to:
Select memory channels, tone channels and DTMF codes (dur-
ing transmission).
Set TX codes and BIIS status number.
Input text message for SDM operation.
Start up with a password.
Input the Individual ID code for digital operation.
!0 MONITOR SWITCH
Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while
pushing and holding this key. (LMR operation only)
Activates one of (or two of) the following functions on
each channel independently.
(PMR or BIIS PMR operation only)
Push and hold the key to unmute the channel (audio is
emitted; audible condition).
Push the key to toggle the mute and unmute conditions
(toggles audible and inaudible).
Push the key to mute the channel (sets to inaudible only).
Push the key to unmute the channel (sets to audible only).
Push the key after communication is nished to send a reset
code.
Push the key after communication is nished to send a clear
down code during BIIS operation on a BIIS channel.
NOTE: The unmute condition (audible conditions)
may automatically return to the mute condition
(inaudible condition) after a specied period.
Desired function can be programmed by your dealer. (p. 7)
!1 PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
Push to transmit the call during BIIS operation, depend-
ing on the setting.
!2 UP/DOWN SWITCHES
Push to select an operating channel.
Push to select a TX code channel after pushing
[TX CODE CH SELECT].
Push to select a DTMF channel after pushing [DTMF].
Push to select a scan group after pushing and holding
[SCAN].
Push to select a BIIS code, status number or SDM
(Short Data Message) after pushing [DIGITAL].
Desired functions can be programmed independently by your
dealer. (p. 7)
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 5 (1,1)
6
2
PANEL DESCRIPTION
Function display
q SIGNAL STRENGTH INDICATOR
Indicates relative signal strength level.
w LOW POWER INDICATOR
Appears when low output power is selected.
e AUDIBLE INDICATOR
Appears when the channel is in the audible (unmute)
condition.
Appears when the specified 2/5-tone/BIIS code is
received.
r COMPANDER INDICATOR
Appears when the compander function is activated.
t SCRAMBLER INDICATOR
Appears when the voice scrambler function is activated.
y BELL INDICATOR
Appears/blinks when the specific 2/5-tone/BIIS code is
received, according to the pre-programming.
u CALL CODE MEMORY INDICATOR
Appears when the call code memory is selected.
i SDM MEMORY INDICATOR
Appears when the SDM memory is selected.
o BATTERY INDICATOR
Appears or blinks when the battery power decreases to a
specied level.
!0 ALPHANUMERIC DISPLAY
Displays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!1 KEY INDICATOR
Indicate the programmed function of the front panel keys
([P0], [P1], [P2] and [P3]).
q t oiuyrew
!0
!1
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 6 (1,1)
7
2
PANEL DESCRIPTION
Programmable function keys
The following functions can be assigned to [EMERGENCY],
[UP], [DOWN], [MONITOR], [P0], [P1], [P2] and [P3] pro-
grammable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specic key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS UP DOWN
Push to select an operating channel.
Push to select a transmit code channel after pushing [TX
Code CH Select].
Push to select a DTMF channel after pushing [DTMF
Autodial].
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
Push to select a BIIS code, status number or SDM after
pushing [Digital].
Push to select an Individual ID code or Talkgroup ID code
after pushing [Individual] or [Talkgroup].
ZONE KEY ZONE
Push this key, then select the desired zone using [CH Up]/
[CH Down].
What is zone? The desired channels are assigned
into a zone according to the intended use for grouping. For
example, Staff A and Staff B are assigned into a
Business zone, and John and Cindy are assigned into a
Private zone.
SCAN A START/STOP KEY SCNA
This keys operation depends on the Power ON Scan setting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after a speci-
ed time period has passed. In case of transmission during
scan, pauses scanning. Scanning resumes after a specied
time period has passed after the transmission is nished.
Push and hold this key for 1 sec. to indicate the scan group,
then select the desired group using [CH Up]/[CH Down].
SCAN B START/STOP KEY SCNB
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning
resumes after a specied time period has passed after the
transmission is nished.
Push and hold this key for 1 sec. to indicate the scan
group, then select the desired group using [CH Up]/
[CH Down].
2
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 7 (1,1)
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-F70S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-F70S in de taal/talen: Engels als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info