21
3 BIIS OPERATION
■ Auto emergency transmission
When [EMER (Silent)] is pushed, an emergency signal is au-
tomatically transmitted for the specified time period.
The status 22 (Emergency) is sent to the selected ID station,
and the position data is transmitted after the emergency sig-
nal when a GPS receiver is connected to the transceiver.
The emergency transmission is performed on the emergency
channel, however, when no emergency channel is specified,
the signal is transmitted on the previously selected channel.
There is no change in the function display or beep emission
during automatic emergency transmission.
■ Stun function
When the specified ID, set as a killer ID, is received, the stun
function is activated.
When the killer ID is received, the transceiver switches to the
passcode required condition. Entering of the passcode via the
keypad is necessary to operate the transceiver again in this
case.
■ BIIS indication
The following indications are available for the BIIS operation
on an MSK channel.
: Individual/group call is successful.
: Message (status or SDM) transmission is
successful.
: No answer back is received.
: Appears during retry of the call (2nd call).
: The call is cancelled for some reason.
: Called station is in busy.
■ Horn output
An automatic horn sounding function is available when the
optional OPC-617
ACC CABLE
is connected. When a status
message is received, the transceiver controls the vehicles
horn for the specified time period to inform you that a status
message is received.
This function is convenient when the operator away from the
transceiver or vehicle.
Ask your dealer or system operator for connection and set-
ting details.
