12472
34
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
New master
INSTRUCTION MANUAL
PMR446 FM TRANSCEIVER
iF22SR
IC-F22SR_2.qxd 03.5.29 14:11 Page 1 (1,1)
New master
i
FOREWORD
Thank you for purchasing the IC-F22SR PMR446 FM trans-
ceiver. This PMR FM transceiver meets the European PMR446
specification. This transceiver is designed for those who require
top-grade quality, performance and outstanding reliability under
the most demanding conditions.
FEATURES
Free of user-license and applications
All 8 PMR channels and Auto Scan channel are
available
52 convenient CTCSS tone channels
83 convenient DTCS tone channels also available
Rugged construction
500 mW (ERP) High output power
Icom, Icom Inc. and the logo are registered trademarks of
Icom Incorporated (Japan) in the United states, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
IC-F22SR_2.qxd 03.5.29 14:11 Page 2 (1,1)
New master
ii
2 types of built-in Code Squelch Systems:
CTCSS; Continuous Tone Coded Squelch System
DTCS; Digital Tone Code Squelch
CTCSS* and DTCS* encoder/decoder are standard, providing
quiet stand-by. Audio (voice) signals are output only when a sig-
nal with a matched CTCSS or DTCS tone signal is received—
very helpful for group communications. (pgs. 14, 28)
*Select one of CTCSS or DTCS for your convenience.
2 types of “Ring” function
The “Smart-Ring”* function and the “Call-Ring” function are avail-
able for smart and simple station calls providing a telephone-
style ring when called. 16 different ringing tones are available.
(pgs. 19–20)
*“Smart-Ring” function available only when all of your group sta-
tion use the same CTCSS tone code on the same operating
channel.
SUPPLIED ACCESSORIES
Belt clip ……………………………………………………1
BC-146* (
Regular charger) …………………………………1 set
(*Depends on version
)
D Attach or detach the belt clip to the transceiver as illustrated
below.
IC-F22SR_2.qxd 03.5.29 14:11 Page 3 (1,1)
New master
iii
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL–This instruction
manual contains important operating instructions for the
IC-F22SR PMR446 FM transceiver.
CAUTIONS
R WARNING! NEVER hold the transceiver so that the an-
tenna is very close to, or touching exposed parts of the body,
especially the face or eyes, while transmitting. The transceiver
will perform best if the microphone is 5 to 10 cm away from the
lips and the transceiver is vertical.
R WARNING! NEVER operate the transceiver with a
headset or other audio accessories at high volume levels.
DO NOT push the PTT when not actually desiring to transmit.
DO NOT modify the transceiver for any reason.
AVOID using or placing the transceiver in direct sunlight or in
areas with temperatures below –25°C or above +55°C. In an
extreme low temperature environment (around –25°C), the ca-
pacity of Alkaline or dry cell batteries may exhaust quickly. In
such case, we recommend to replace the batteries, when the
“Low Battery” warning appears during transmission.
The use of non-Icom battery packs/chargers may impair trans-
ceiver performance and invalidate the warranty.
IC-F22SR_2.qxd 03.5.29 14:11 Page 4 (1,1)
New master
iv
TABLE OF CONTENTS
FOREWORD ………………………………………………………………… i
FEATURES ……………………………………………………………… i–ii
SUPPLIED ACCESSORIES ……………………………………………… ii
IMPORTANT ……………………………………………………………… iii
CAUTIONS ………………………………………………………………… iii
TABLE OF CONTENTS …………………………………………………… iv
1 PANEL DESCRIPTION ……………………………………………… 1–3
Switches, controls, keys and connectors ……………………… 1–2
LED indicator ………………………………………………………… 3
2 BATTERY PACKS …………………………………………………… 4–10
Battery pack replacement …………………………………………… 4
Battery cautions ……………………………………………………… 5
Battery charging ……………………………………………………… 6
Charging NOTE ……………………………………………………… 9
Battery case (Option) ……………………………………………… 10
3 BASIC OPERATION ……………………………………………… 11–18
Receiving and transmitting ………………………………………… 11
Setting squelch level ……………………………………………… 13
Auto scan function ………………………………………………… 13
Setting the group code number ……………………………… 14–18
4 RING FUNCTION ………………………………………………… 19–20
Smart-Ring ………………………………………………………… 19
Call-Ring …………………………………………………………… 19
5 OTHER FUNCTIONS ……………………………………………… 21–23
Monitor audible function …………………………………………… 21
Time-Out Timer ……………………………………………………… 21
Power save function ………………………………………………… 22
Low battery indication ……………………………………………… 22
Optional HM-75A functions ………………………………………… 23
6 SPECIFICATIONS ……………………………………………………… 24
7 OPTIONS …………………………………………………………… 25–26
8 GLOSSARY ………………………………………………………… 27–28
9 CE …………………………………………………………………… 29–30
DECLARATION OF CONFORMITY ……………………………… 30
IC-F22SR_2.qxd 03.5.29 14:11 Page 5 (1,1)
New master
1
1
PANEL DESCRIPTION
SP
MIC
u External
[SP]/[MIC] jack
Antenna
y TX/RX
Indicator LED
q [CH] selector
Speaker
MIC
w [VOL/ POWER]
e [S-Ring
/C-Ring] key
r [PTT]
t [MONI] key
u External
[SP]/[MIC] jack
(see below)
Ext. MIC.
Ext. SP
Switches, controls, keys and
connectors
IC-F22SR_2.qxd 03.5.29 14:11 Page 6 (1,1)
New master
2
PANEL DESCRIPTION
1
q CHANNEL SELECTOR [CH]
Rotate the selector to select the desired channel number 1 to
15. (pgs. 11, 12)
Select the Auto Scan channel No.16. (p. 13)
Select the Call-Ring melody. (p. 19)
w VOLUME/POWER CONTROL [VOL/POWER]
Rotate the [VOL/POWER] clockwise to turn the power ON/OFF.
A long power ON beep emits when turning the power ON.
Rotate clockwise to increase and counterclockwise to decrease
the audio volume.
e SMART-RING/CALL-RING KEY [S-Ring/C-Ring]
Push to send a Smart-Ring call. (p. 19)
Push and hold to send a Call-Ring. (p. 19)
r PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
t MONITOR KEY [MONI]
Push and hold to open the noise/tone squelch.
Push to turn the tone squelch ON.
y TX/RX INDICATOR LED [LED]
Lights red while transmitting.
Lights green while receiving a signal, or squelch is open.
Lights orange while sending/receiving a Smart-Ring call. (p. 19)
Indicates the Low-battery condition. (p. 3)
u EXTERNAL SPEAKER AND MICROPHONE JACKS [SP]/[MIC]
Connects an optional speaker-microphone such as HM-75A.
(p. 23)
IC-F22SR_2.qxd 03.5.29 14:11 Page 7 (1,1)
New master
3
1
PANEL DESCRIPTION
LED indicator
The TX/RX indicator LED indicates informa-
tion in several ways as follows;
(Ref.; R=Red, G=Green, O=Orange)
[Brink patterns]
R R R R
R R
R R R R
R R
G
R
O O
GG
TX: Turns Red while transmitting a signal.
RX (Busy): Turns Green while receiving a signal.
Smart-Ring: Calling or answering back the Smart-Ring now.
Fast/Slow scan: CH scanning or CTCSS FIND is functioning now.
Low BATT1: You should charge the battery. (blinks slowly)
Low BATT2: You must charge the battery. (blinks fast)
CAUTION:
Low BATT3: If you did not charge the battery after Low BATT2
warning has appeared, the Low BATT3 warning beep emits for 15
sec. then the power turns OFF automatically.
TX low BATT1: Low BATT1 was detected during TX mode.
TX low BATT2: Low BATT2 was detected during TX mode.
IC-F22SR_2.qxd 03.5.29 14:11 Page 8 (1,1)
4
2
BATTERY PACKS
New master
Battery pack replacement
Before replacing the battery pack, the volume control MUST be ro-
tated fully counterclockwise,
until a click is heard, to turn the
power OFF.
Push the battery release for-
ward, then pull the battery
pack upward with the trans-
ceiver facing you.
DD
BATTERY PACKS
* Operating periods are calculated under the following conditions;
Tx : Rx : standby =5 : 5 : 90
Operating period depends on the alkaline cells used. (BP-208 only)
yrettaB
kcap
egatloV yticapaC
doirepgnigrahC
gnitarepO
*doirep
BC-146
BP-208
AArofesacyretta
B
)6R( × enilakla6
902-PB V2.7srh21srh5.1 hrs14.5
012-PB V2.7
0561
hAm
18.5 hrs srh2 hrs21.5
1100
mAh
BP-222
V2.7
006
hAm
hr1
hrs
8
6.5 hrs
BC-144,
BC-119 or
BC-121
IC-F22SR_2.qxd 03.5.29 14:11 Page 9 (1,1)
5
2
BATTERY PACKS
New master
Battery cautions
CAUTION! NEVER short the terminals of the battery pack (or
charging terminals of the transceiver). Also, current may ow into
nearby metal objects such as a necklace, so be careful when plac-
ing battery packs (or the transceiver) in handbags, etc.
Simply carrying with or placing near metal objects such as a neck-
lace, etc. causes shorting. This will damage not only the battery
pack, but also the transceiver.
NEVER incinerate used battery packs. Internal battery gas may
cause an explosion.
NEVER immerse the battery pack in water. If the battery pack be-
comes wet, be sure to wipe it dry BEFORE attaching it to the
transceiver.
Clean the battery terminals to avoid rust or miss contact.
Keep battery contacts clean. Its a good idea to clean battery ter-
minals once a week.
If your battery pack seems to have no capacity even after being
charged, completely discharge it, then fully charge the battery pack
again. If the battery pack still does not retain a charge (or only very
little charge), a new battery pack must be purchased.
IC-F22SR_2.qxd 03.5.29 14:11 Page 10 (1,1)
6
2
BATTERY PACKS
New master
Battery charging
D Regular charging with the BC-146
The supplied* BC-146 provides regular charging of optional battery
pack with/ without transceiver.
(*depends on version)
DD
Spacer combination.
Especially when charging the battery with the transceiver;
Be sure to attach the spacer (Spacer B/C) to the adaptor (Spacer
A) with the orientation as follows.
Attach the spacer (Spacer B/C) to the adaptor with the orientation
of the stamp “” pointing up.
NOTE: Push the notch carefully
when removing the spacer from
the adaptor.
Check orientation
and
Spacer A
Spacer B/C
IC-F22SR_2.qxd 03.5.29 14:11 Page 11 (1,1)
7
2
BATTERY PACKS
New master
D Regular charging with the BC-146 (continued)
First insert the spacer in to the BC-146, then insert the battery or
the transceiver.
Be sure to check orientation and the spacer combination.
Avoid overchargingBatteries must be removed from the charger
to stop charging. Batteries should not be
charged for more than 24 hours.
Turn power OFF
AC adaptor
BP-209, BP-210
or BP-222 only
Charging indicator
Check
orientation*
*Viewable stamps of the spacer may differ according to the
spacer combination. See p. 6 for details.
IC-F22SR_2.qxd 03.5.29 14:11 Page 12 (1,1)
8
2
BATTERY PACKS
New master
D Rapid charging with the BC-121N+AD-101
The optional BC-121N allows up to 6 battery packs to be charged
simultaneously. The following are additionally required.
Six AD-101
An AC adaptor (may be supplied with the BC-121N depending on
version).
D Rapid charging with
the BC-144+AD-99
The optional BC-144 pro-
vides rapid charging of op-
tional battery packs.
The following are addition-
ally required:
One AD-99 (depends on
version).
An AC adaptor (may be
supplied with the BC-144
depending on version).
Check orientation
for correct charg-
ing.
(Insert togeth-
er with charging
adaptor.)*
Turn power OFF.
BC-144
AC adaptor
(purchased
separately)
Charge indicator
(each indicator functions independently)
Turn power OFF.
AD-99
IC-F22SR_2.qxd 03.5.29 14:11 Page 13 (1,1)
9
2
BATTERY PACKS
New master
Charging NOTE
Prior to using the transceiver for the rst time, the battery pack must
be fully charged for optimum life and operation.
Recommended temperature range for charging:
+10°C to +40°C.
Use the supplied charger or optional charger (BC-119N/BC-
121N/BC-144 for rapid charging, BC-146 for regular charging)
only. NEVER use other manufacturers chargers.
The optional BP-209, BP-210 or BP-222 battery packs include
rechargeable Ni-Cd (Ni-MH: BP-210) batteries and can be charged
approx. 300 times. Charge the battery pack before rst operating
the transceiver or when the battery pack becomes exhausted.
If you want to charge the battery pack more than 300 times, the fol-
lowing points should be observed:
Avoid overchargingbatteries must be removed from the charger
to stop charging. Batteries should not be charged for more than
24 hours.
Use the battery until it becomes almost completely exhausted
under normal conditions.
DD
Battery pack life
When the operating period becomes extremely short even after
charging the battery pack fully, a new battery pack is needed.
NOTE for the rapid chargers : The charger rapidly charges a
battery pack to a specied level, not a completed level, to pre-
vent overcharging. Leave the battery pack in the charger for a
few more hours (up to 15 hours; depending on battery condi-
tion) after the LED indicator turns green, to charge the battery
completely.
IC-F22SR_2.qxd 03.5.29 14:11 Page 14 (1,1)
10
2
BATTERY PACKS
New master
Battery case (Option)
When using a BP-208
OPTIONAL BATTERY CASE
attached to the
transceiver, install 6 AA (R6) size alkaline batteries as illustrated
below.
DD
CAUTIONS
Use ALKALINE batteries only.
Make sure all battery cells are the same brand, type and ca-
pacity.
Never mix old and new batteries.
Either of the above may cause a fire hazard or damage the
transceiver, if ignored.
Never incinerate used battery cells since internal battery gas
may cause them to rupture.
Never expose a detached battery case to water.
If the battery case gets wet, be sure to wipe it dry before using
it.
IC-F22SR_2.qxd 03.5.29 14:11 Page 15 (1,1)
11
3
BASIC OPERATION
New master
Receiving and transmitting
CHARGE the battery pack before rst operating the transceiver.
The transceiver has been pre-programmed with all the PMR fre-
quency channels and CTCSS tone
codes as a default. The CTCSS tone
number can be changed if required.
Receiving:
q Rotate the [VOL] knob clockwise to
turn the power ON.
w Rotate the [CH] selector to select the
desired operating channel.
Setting the your group code number
if required. (pgs. 1416)
e Listen for a transmission and adjust
[VOL] to a comfortable listening level.
[LED] turns to green, when the re-
ceived signal contains same CTCSS
or DTCS code number.
When no transmission is heard,
push and hold [MONI] while adjust-
ing [VOL].
The transceiver is now set to receive desired calls on the selected
channel.
Transmitting:
Wait for the channel to become clear to avoid interference.
r While pushing and holding [PTT], speak into the microphone at a
normal voice level.
[LED] turns to red.
t Release [PTT] to return to receive.
*IMPORTANT: To maximize the readability of your transmitted sig-
nal, pause a few sec. after pushing [PTT], hold the microphone 10
to 15 cm from your mouth and speak at a normal voice level.
[S-Ring
/C-Ring]
[PTT]
[MONI]
[VOL
/POWER]
[CH selector]
*microphone
IC-F22SR_2.qxd 03.5.29 14:11 Page 16 (1,1)
12
3
BASIC OPERATION
New master
Frequency channel/CTCSS tone list (default)
Channel
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
No.12
No.13
No.14
No.15
No.16
RX/TX Freq. (MHz)*
1
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
Auto Scan
CH spacing
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
Narrow
------
Tone (Hz)*
2
NO
NO
NO
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
------
*
1
: All operating channel frequencies are xed.
*
2
: CTCSS tone frequencies can be programmed by you. You
can use DTCS (Digital Tone Code Squelch) instead of
CTCSS. (p. 17)
IC-F22SR_2.qxd 03.5.29 14:11 Page 17 (1,1)
13
3
BASIC OPERATION
New master
Setting squelch level
The squelch circuit mutes the received audio signal depending on
the signal strength.
q While pushing and holding
[PTT] and [MONI], turn the
transceivers power ON to
enter the squelch adjustment
mode.
w Push [S-Ring/C-Ring] to in-
crease the squelch level (tight
squelch) or [MONI] to de-
crease the squelch level (loose
squelch).
Squelch level will be xed after 1 sec.
DD
Open the squelch
Pushing and holding [MONI] cancels the squelch function. You
can receive any signals on a channel.
Push [MONI] to turn ON the tone squelch function again.
Auto Scan function
Auto scan function proceeds in sequence from lower channel to
higher channel numbers. Scanning searches for signals automati-
cally and makes it easier to locate new stations for contact or lis-
tening purposes.
q Rotate the [CH] select knob to CH 16.
w Scan starts automatically.
TX/RX indicator LED blinks green slowly.
When receiving a signal, scan pauses until the signal disappears.
CONVENIENT: You can perform the scan start/stop by the optional
HM-75A
SPEAKER
-
MICROPHONE
[Mic A] key.
IC-F22SR_2.qxd 03.5.29 14:11 Page 18 (1,1)
14
3
BASIC OPERATION
New master
Setting the group code number
DD
USING THE CTCSS TONE CODE
The transceiver is equipped with 52 CTCSS tones. (See next page)
CTCSS operation provides communication with silent standby since
you will only receive calls from group members using the same
CTCSS tone.
You can assign a different tone to CH 1 to CH 15 independently.
q While pushing and holding [PTT], [S-Ring/C-Ring], [MONI], turn
[VOL] to turn the power ON.
w Select the desired CH 1 to CH 15 that you want to assign the
CTCSS tone frequency to.
e Push and hold [S-Ring/C-Ring] until a beep (Pi) is emitted.
r Push [PTT] the necessary number of times to choose the 10 digit
of the desired code from the channel list.
t Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See next page.)
y Push [PTT] the necessary number of times to choose the 1 digit
of the desired code from the frequency list.
u Push [S-Ring/C-Ring].
i Turn the power OFF, and then ON again.
[Example]
To assign tone code No. 28 as CH1;
q While pushing and holding [PTT], [S-Ring/C-Ring] and [MONI],
turn [VOL] to power ON.
w Select the CH 1, then push and hold [S-Ring/C-Ring] until a beep
(Pi) is emitted.
e Push [PTT] twice to choose the 10 digit of the desired channel.
r Push [S-Ring/C-Ring], then push [PTT] eight times to choose the
1 digit of the desired code.
t Push [S-Ring/C-Ring]. A long beep and 3 short beeps are emit-
ted.
y Turn the power OFF, and then ON again.
IC-F22SR_2.qxd 03.5.29 14:11 Page 19 (1,1)
15
3
BASIC OPERATION
New master
No.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Freq.
OFF
67.0
69.3*
71.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
No.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Freq.
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
No.
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
No.
48
49
50
51
52
Freq.
233.6
241.8
250.3
254.1
270.4
Freq.
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
CTCSS tone code list
:
EIA/TIA standard code (Recommended to use these.)
*Reserved for Smart-Ring function (Unit: Hz)
Conrmation beep list
; Single beep
; Long beep
Push [PTT]
no
1 (Once)
2 (Twice)
3 (Third)
4 (Fourth)
Conrmation beep
●●
●●●
●●●●
Push [PTT]
5 (Fifth)
6 (Sixth)
7 (Seventh)
8 (Eighth)
9 (Ninth)
Conrmation beep
●●●●●
●●
●●●
●●●●
IC-F22SR_2.qxd 03.5.29 14:11 Page 20 (1,1)
16
3
BASIC OPERATION
New master
DD
CTCSS FIND
This transceiver can detect the CTCSS tone frequency in the re-
ceived signal. By monitoring a signal that is being transmitted from
the other station, you can determine the tone frequency required to
communicate with them.
This function very useful when you are going to communicate with
unknown CTCSS code number stations. CTCSS FINDscans all
of the CTCSS codes, then stops when a tone code is detected.
q While pushing and holding [S-Ring/C-Ring], [MONI], turn [VOL]
to turn the power ON.
w Select the desired CH 1 to CH 15 that you want to assign the
CTCSS tone code.
e Push and hold [S-Ring/C-Ring] until a beep (Pi) is emitted.
CTCSS FIND starts to scan the code.
r CTCSS FIND stops when the tone code is detected.
t Push [S-Ring/C-Ring] to determine the tone code number.
y Turn the power OFF, and then ON again.
DD
Turn the squelch function ON/OFF
Push and hold [MONI] to turn the tone squelch function OFF.
You can receive any signals on a channel, when you receive
the other groups signal.
Push [MONI] to turn ON the tone squelch function again. You
can receive only signals containing the same as your group
code.
IC-F22SR_2.qxd 03.5.29 14:11 Page 21 (1,1)
17
3
BASIC OPERATION
New master
DD
USING THE DTCS CODE
This transceiver is equipped with 83 DTCS codes. DTCS operation
provides communication with silent standby since you will only re-
ceive calls from group members using the same DTCS number.
You can assign different numbers to CH 1 to CH 15 independently.
q While pushing and holding [PTT], [S-Ring/C-Ring] and [MONI],
turn [VOL] to turn the power ON.
w Select the desired CH 1 to CH 15 that you want to assign the
DTCS code to.
e Push and hold [MONI] until a beep (Pi) is emitted.
r Push [PTT] the necessary number of times to choose the 100
digit of the desired code number.
t Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
y Push [PTT] the necessary number of times to choose the 10 digit
of the desired code number.
u Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
i Push [PTT] the necessary number of times to choose the 1 digit
of the desired code number.
o Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
!0 Push [PTT] once more, if you want to use Inverse mode.
!1 Push [S-Ring/C-Ring] to complete the setting.
Conrmation beep is emitted. (See p. 15)
!2 Turn the power OFF, and then ON again.
IC-F22SR_2.qxd 03.5.29 14:11 Page 22 (1,1)
18
3
BASIC OPERATION
New master
[Example]
To assign code 261I (Inverse) as CH12;
q While pushing and holding [PTT], [S-Ring/C-Ring], [MONI], turn
[VOL] to turn the power ON.
w Select CH 12.
e Push and hold [MONI] until a beep (Pi) is emitted.
r Push [PTT] twice to choose the 100 digit of the code number.
t Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
y Push [PTT] six times to choose the 10 digit of the code number.
u Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
i Push [PTT] once to choose the 1 digit of the code number.
o Push [S-Ring/C-Ring].
Conrmation beep is emitted. (See p. 15)
!0 Push [PTT] once more, to use Inverse mode.
*You can skip step !0, if you want to use Normal mode.
!1 Push [S-Ring/C-Ring] to complete the setting.
Conrmation beep is emitted. (See p. 15)
!2 Turn the power OFF, and then ON again.
DTCS code list (EIA/TIA standard code)
023
025
026
031
032
043
047
051
054
065
071
072
073
074
114
115
116
125
131
132
134
143
152
155
156
162
165
172
174
205
223
226
243
244
245
251
261
263
265
271
306
311
315
331
343
346
351
364
365
371
411
412
413
423
431
432
445
464
465
466
734
743
754
631
632
654
662
664
703
712
723
731
732
503
506
516
532
546
565
606
612
624
627
IC-F22SR_2.qxd 03.5.29 14:11 Page 23 (1,1)
19
4
RING FUNCTION
New master
Smart-Ring
The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached the member of your
group even if the operator is temporarily away from the transceiver.
DD
Smart-Ring operation (see right)
q Set the same operating channel and CTCSS tone* code for all of
your group transceivers.
w Push [S-Ring/C-Ring] to send the Smart-Ring call.
When a member of your group station answers your call, then
the transceiver emits beep tones for every 30 sec. and TX/RX
indicator blinks with an orange color.
Push [MONI] to cancel the Ringer beep and indication.
When no answer comes back, the transceiver emits short fail-
ure beep tones.
e Push [PTT] to answer the call and to stop the beeps and blink-
ing.
Call-Ring
Sends the pre-selected ring tone to your group members.
DD
Select the Call-Ring melody
q While pushing and holding [PTT] and [S-Ring/C-Ring], rotate
[VOL] to turn the power ON.
A sample melody is emitted.
w Rotate [CH] to select the ringer melody.
Push [S-Ring/C-Ring] to monitor the selected melody once
more.
e Turn the power OFF to determine the melody.
*NOTE: This function is available only when the called station
has use the same CTCSS tone code and the same operating
channels as you.
IC-F22SR_2.qxd 03.5.29 14:11 Page 24 (1,1)
20
4
RINGER FUNCTION
New master
DD
Call your group member with Call-Ring melody
Pushing and holding [S-Ring/C-Ring] to sends a ring tone with-
out pushing [PTT].
The ring tone is emitted while the [S-Ring/C-Ring] key is
pressed.
The same ring tone comes from your group stations speaker.
push [S-Ring/C-Ring]
Piro Piro
Answer back (automatic)
Piro Piro
Communication
Smart-Ring operation
IC-F22SR_2.qxd 03.5.29 14:11 Page 25 (1,1)
21
5
OTHER FUNCTIONS
New master
Monitor audible function
The monitor function allows you to open the transceivers squelch
manually to check whether a channel is busy or not. The trans-
ceiver has 2 conditions for receive standby:
Audible condition:
This condition mutes audio ONLY when
no carrier is present. You can receive (or
monitor) any signals on a channel.
Push and hold the [MONI] switch to can-
cel the CTCSS or DTCS tone squelch
function.
Any audio mute functions are cancelled
while pushing the [MONI] switch.
Inaudible condition: This condition
mutes ALL signals except those directed
to you. Therefore you should check a
channels condition (busy or not) with the
monitor function before transmitting.
Push the [MONI] switch momentarily to
select the inaudible condition.
Time-Out Timer
The transceiver has time-out timer function. This function prevents
continuous, extend transmissions. This timer automatically turns a
transmission OFF 3 min. after it starts.
A warning beep emits 10 sec. before the limit is reached.
The end beep emits 5 times to announce the end of the transmis-
sion.
All signals are
received
Only signals con-
taining the proper
tone are received
IC-F22SR_2.qxd 03.5.29 14:11 Page 26 (1,1)
22
5
OTHER FUNCTIONS
New master
Power save function
The power save function reduces the current drain to conserve bat-
tery power.
The power save function is automatically turned ON when no op-
eration is performed or no signal is received for 5 sec.
Low battery indication
The TX/RX LED indicates 4 levels of the Low battery condition as
follows.
If the Low battery warning appears during operation, please
charge or replace the battery.
[Brink patterns]
R R R R
R R
R R R R
R R
Low BATT1: You should charge the battery. (blinks slowly)
Low BATT2: You must charge the battery. (blinks fast)
TX low BATT1: Low BATT1 was detected during TX mode.
TX low BATT2: Low BATT2 was detected during TX mode.
In an extreme low temperature surrounding (around 20°C), the
capacity of the battery may exhaust quickly (especially Alkaline
batteries). In such case, we recommend to charge the battery or
replace the batteries, when the Low Battery Indication appears
during operation.
IC-F22SR_2.qxd 03.5.29 14:11 Page 27 (1,1)
23
5
OTHER FUNCTIONS
New master
Optional HM-75A functions
The optional HM-75A allows you to remotely send Smart-Ring/Call-
Ring calls, open the squelch, etc. The switches on the HM-75A
function as follows.
CAUTION: When connecting the HM-75A to the transceiver, make
sure that the transceiver is turned OFF, otherwise the transceiver
may malfunction.
Mic UP
Mic A
Mic Down
Mic B
Mic UP
Mic DOWN
Mic A
Mic B
Sends Smart-Ring.
Turn the Tone
Squelch ON.
Start/Stop scan B.
---
Sends Call-Ring.
Turn the Tone
Squelch OFF.
---
---
Key Push Push and hold
IC-F22SR_2.qxd 03.5.29 14:11 Page 28 (1,1)
24
6
SPECIFICATIONS
New master
GENERAL
Frequency coverage : 446.00625446.09375 MHz
Mode : F3E (FM)
No. of operating Ch. : 8 (simplex)
Power supply requirement : 7.2 V (R6x6) or BP-222
Current drain : 0.6 A approx.
Operating temp. range : 25˚C to +55˚C
No. of CTCSS freq. : 38
Dimensions : 54(W)x128(H)x37(D) mm
(projections not included)
Weight : 317 g (including BP-222 Ni-Cd batteries)
TRANSMITTER
Output power : Less than 500 mW ERP
Ext. mic. connector : 3-conductor 2.5 (d) mm/2.2 k
RECEIVER
Sensitivity : Less than 26.5 dBµV/m
(20 dB SINAD)
Audio output power : More than 500 mW at 5 %
(at 7.2 V DC) distortion with an 8 load
Ext. speaker connector : 2-conductor 3.5 (d) mm/8
All stated specications are subject to change without no-
tice or obligation.
IC-F22SR_2.qxd 03.5.29 14:11 Page 29 (1,1)
25
7
OPTIONS
New master
Options
DD
BATTERY PACKS
BP-208
BATTERY CASE
Allows a set of Alkaline batteries to operate the handheld when
charging the rechargeable battery or in emergencies, etc. 6 AA
(R6) cells are required.
BP-209 Ni-Cd
BATTERY PACK
7.2 V/1100 mAh Ni-Cd battery pack, allows more than 12 hours
operation.
BP-210 Ni-MH
BATTERY PACK
7.2 V/1650 mAh Ni-MH battery pack, allows approx. 18.5 hours
operation.
BP-222 Ni-Cd
BATTERY PACK
7.2 V/600 mAh Ni-Cd battery pack, allows approx. 6.5 hours op-
eration (Same as supplied with models).
DD
CHARGER
BC-119N
DESKTOP CHARGER
+ AD-101
For rapid charging of battery packs. An AC adaptor is supplied
with the charger. Charging time: 1.5 to 2 hrs.
BC-121N
MULTI
-
CHARGER
+ AD-101
For rapid charging up to 6 battery packs simultaneously. An AC
adaptor may be supplied depending on version. Six AD-101s are
necessary. Charging time: 1.5 to 2 hrs.
BC-144
DESKTOP CHARGER
For rapid charging of BP-209 (Ni-Cd), BP-210 (Ni-MH) and BP-
222 (Ni-Cd).
BC-146
DESKTOP CHARGER
For regular charging of BP-209 (Ni-Cd), BP-210 (Ni-MH) and BP-
222 (Ni-Cd).
IC-F22SR_2.qxd 03.5.29 14:11 Page 30 (1,1)
26
7
OPTIONS
New master
DD
OTHER OPTIONS
HM-46L/HM-75A/HM-131L
SPEAKER
-
MICROPHONES
Combination speaker-microphone that provides convenient oper-
ation while hanging the transceiver from your belt.
HM-75A has programmable function key Mic Up, Mic Down, Mic
A, Mic B.
HM-131L has a moisture proof construction.
HM-128L
EARPHONE
-
MICROPHONE
HS-51
HEAD SET
Allows you hands-free operation. Includes PTT and TOT.
VS-1L
VOX
/
PTT CASE
+ HS-94/HS-95/HS-97
Separated VOX/PTT unit and one of the following microphone
unit is required additionally.
HS-94: Ear hook type
HS-95: Neck-arm type
HS-97: Throat microphone
SP-13
EARPHONE
Provides clear receive audio in noisy environments.
MB-68/MB-74/MB-87
BELT CLIPS
MB-68: Regular type belt clip.
MB-74: Exclusive alligator-type belt clip. Same as that supplied
with the transceiver.
MB-87: Swivel belt clip.
IC-F22SR_2.qxd 03.5.29 14:11 Page 31 (1,1)
27
8
GLOSSARY
New master
What is squelch?
A squelch circuit allows you to mute undesired noise while re-
ceiving no signal and emit audio while receiving signals.
This provides quiet standby. The [MONI] key cancels the
squelch setting. This is useful to listen to weak signals that
do not open the squelch.
Talk Range
The IC-F22SR is designed to maximize performance and im-
prove transmission range in the field. However, the single
most important factor in transmit range (talk power) is your
surrounding environment. These radios are line of sight ra-
dios and as such, transmission range is inuenced by the de-
gree to which you can see the other communicating party.
Large concrete structures and heavy foliage or transmission
from inside a building or vehicle will reduce your talk power.
Optimal range: wide, open areas free of obstructions.
Medium range: large buildings or trees blocking your line of
sight.
Minimum range: mountainous areas or areas of heavy fo-
liage.
IC-F22SR_2.qxd 03.5.29 14:11 Page 32 (1,1)
28
8
GLOSSARY
New master
What is CTCSS (Continuous Tone Coded Squelch Sys-
tem) ?
CTCSS (Continuous Tone Coded Squelch System) allows
communication with silent stand by. Only signals containing
your group code can open the squelch.
This conveniently eliminates unwanted audio and is useful in
group activities or security related activities where unwanted
output can be a problem. Note that CTCSS group mode is not
privateanyone can receive your calls.
The IC-F22SR is equipped with max. 52 tone codes for CTCSS
use. Selecting a code applies it to all 8 operating channels.
Each push of [PTT] superimposes your group code over your
transmit signal; and, only signals containing the same code can
open your squelch. To temporarily hear all signals (including
noise) push and hold [MONI]. Do not use CTCSS if you want to
be able to hear signals on all channels.
Auto Scan function + Smart-Ring
The Auto Scan function searches for signals automatically
and makes it easier to locate new stations for contact or lis-
tening purposes. BUT because the Auto Scan function
checks each operating channel for only a few moments, the
transceiver's response accuracy to Smart-Ring calls is re-
duced. Use one of CH 115 when you and your group are
going to use the Smart-Ring function, otherwise the Smart-
Ring function may fail to answer-back the call.
IC-F22SR_2.qxd 03.5.29 14:11 Page 33 (1,1)
29
9
CE
New master
ABOUT CE
CE Versions of the IC-F22SR which display the
CE symbol on the serial number seal, comply
with the essential requirements of the European
Radio and Telecommunication Terminal Directive
1999/5/EC.
This warning symbol indicates that this equip-
ment operates in non-harmonised frequency
bands and/or may be subject to licensing condi-
tions in the country of use. Be sure to check that
you have the correct version of this radio or the
correct programming of this radio, to comply with
national licensing requirement.
IC-F22SR_2.qxd 03.5.29 14:11 Page 34 (1,1)
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-F22SR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-F22SR in de taal/talen: Engels als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info