VIII
QUICK REFERENCE GUIDE
DD
Starting scan
1. Select VFO mode.
Push [V/M] (
SKIP
•
S
.
MW
) to select the VFO mode for full, band
and programmed scan operation.
• Select memory mode by pushing [V/M] (
SKIP
•
S
.
MW
) again for mem-
ory or bank scan.
2. Selecting a scanning type
Push and hold [CALL] (
MODE
•
SCAN
) for 1 sec.,
then rotate
[DIAL] to select the desired scanning type.
•Available scan types when VFO mode is selected; “ALL” for full
scan; “BAND” for the selected band; one of “PROGxx” (xx=0 to 24)
for programmed scan.
•Available scan types when memory mode is selected; “M ALL” for all
memory scan “B ALL” for all bank scan, “B LINK” for bank link scan,
“BANK” for the selected bank scan.
3. Starting scan
Push [CALL] (
MODE
•
SCAN
) to start the scan.
• Rotate [DIAL] to change the scanning direction.
4. Cancelling scan
Push [CALL] (
MODE
•
SCAN
) again to stop scan.
✔
For your information
The memory channel number you program the scan edges
into correlate “PROGxx” as follows:
00A/00b: Select “PROG 00” to scan between frequencies
programmed in 00A and 00b channels.
•
•
•
•
24A/24b: Select “PROG 24” to scan between frequencies
programmed in 24A and 24b channels.
