Transferring memory contents
MEMORY OPERATION (p. 13) MEMORY OPERATION (p. 12)
q
w
e
r
t
Push [CLR
DEL
] to select the fre-
quency mode or push , then
push [ENT
WX
] to select WX CH*
mode.
Select the desired frequency or WX
CH.*
Push , then push [MR
MW
] to
enter memory programming mode.
“M”, BANK and memory numbers
blink on the display.
Rotate [DIAL] (or push keypad) to
select a desired memory CH num-
ber (0 to 19).
Push [0
BANK
], then select the
BANK number if desired. Push
[0
BANK
] to exit the BANK selec-
tion mode.
Push [ENT
WX
] to program the
memory contents.
q
w
e
Push [MR
MW
] to enter memory
mode.
Select the desired channel to be
transferred.
Push , then push [MR
MW
].
BANK number and memory CH
number disappears as frequency
mode is automatically selected
and the memory contents are
transferred.
MEMORY OPERATION (p. 12)
TAG CHANNELS (p. 17)
q
w
Push [MR
MW
] to select the mem-
ory mode.
Push , then [9
TAG
] to turn the
channel “TAG” ON and OFF.
LOCK FUNCTION (p. 9)
Push ,Then push [7 ] to turn
the key lock function ON.
“ ” appears on the display.
Push ,Then push [7 ] to turn
the keylock function OFF.
q
w
Memory programming
*WX CH available U.S.A. version only.
Memory BANK/CH selection
Push [MR•
MW
] to enter the mem-
ory CH mode.
Push , then push [0
BANK
] to
enter the BANK selection mode.
Push keypad (or rotate [DIAL]) to
select the desired BANK number
(BANK 0 to 9).
Push , then push [0
BANK
] (or
push [ENT
WX
]) to set the BANK
number and exit the BANK selec-
tion mode.
Push [CLR
DEL
] to exit the BANK
selection mode.
q
w
e