3-6
DD
Quick tuning step
The operating frequency can be changed in kHz steps
(0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable) for
quick tuning.
q Push [TS] to turn the quick tuning function ON.
•“Z” appears when the quick tuning function ON.
w Rotate the main dial to change the frequency in pro-
grammed kHz steps.
e Push [TS] again to turn OFF the indicator.
r Rotate the main dial for normal tuning if desired.
DD
Selecting “kHz” step
q Push [TS] to turn the quick tuning function ON and
OFF.
•“Z” appears when the quick tuning function ON.
w Push [TS] for 1 sec. to enter tuning step setting dis-
play.
• Selected tuning steps for all modes appear.
e Select the desired operating mode.
r
Rotate the main dial to select the desired tuning step.
t Repeat steps e and r to select quick tuning steps
for other modes, if desired.
y Push [EXIT/SET] to exit the setting display.
NOTE: When entering quick tuning step set mode,
the quick tuning function must be activated first. The
main and sub bands have independent tuning step
settings.
DD
1
⁄4 tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1
⁄4 tuning function is available. Dial rotation is reduced
to
1
⁄4 of normal speed when the
1
⁄4 tuning function is
ON for finer tuning control.
➥ Push [1/4] to toggle the
1
⁄4 tuning function ON and
OFF.
• “ ” appears when the
1
⁄4 tuning function is ON.
1
⁄4
