71
9
SET MODE
■ Miscellaneous (others) set mode (continued)
RTTY Decode New Line Code
This item selects the new line code of the internal
RTTY decoder. See p. 41 for details.
CR : Carriage Return
LF : Line Feed
CCRR,,LLFF,,CCRR++LLFF
CR, LF and CR+LF
(default)
CCRR++LLFF
CR+LF only
Speech Language
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between English and Japan-
ese as the language.
See p. 73 for unit installation.
EEnngglliisshh
English announcement
(default)
JJaappaanneessee
Japanese announcement
Speech Speed
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between faster or slower syn-
thesizer output.
See p. 73 for unit installation.
HHIIGGHH
Faster announcement
(default)
LLOOWW
Slower announcement
Speech S-Level
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated if desired.
When “OFF” is selected, the signal level is not an-
nounced.
See p. 73 for unit installation.
OONN
Signal level announcement
(default)
OOFFFF
No signal level
announcement
Memo Pad Numbers
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
55
5 memo pads
(default)
1100
10 memo pads
MAIN DIAL Auto TS
This item sets the auto tuning step function. When ro-
tating the tuning dial rapidly, the tuning step automat-
ically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster).
HHIIGGHH
Auto tuning step is turned ON.
Fastest tuning step during rapid rotation
(default)
LLOOWW
Auto tuning step is turned ON.
Faster tuning step during rapid rotation
OOFFFF
Auto tuning step is turned OFF.