12346
53
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
40
4
RECEIVE AND TRANSMIT
2001 NEW
Operating AM
q Push a band key to select the desired band.
w Push [AM/FM] to select AM.
e Rotate [AF] to set audio to a comfortable listening
level.
r Rotate the tuning dial to tune a desired signal.
S-meter indicates received signal strength.
The default tuning step for AM mode is 1 kHz; this can
be changed using the tuning step program mode. (p. 21)
t Push [TRANSMIT] or [PTT] (microphone) to trans-
mit.
The TX indicator lights red.
y Speak into the microphone at your normal voice
level.
Adjust [MIC GAIN] at this step, if necessary.
u Push [TRANSMIT] or release [PTT] (microphone) to
return to receive.
Band keys[TX] indicator[TRANSMIT]
[MIC GAIN] [AM/FM] Tuning dial
Appears
DD
Convenient functions for receive
Preamp and attenuator (p. 47)
Push [P.AMP/ATT] several times to set the pre-
amp OFF, preamp 1 ON or preamp 2 ON.
•“P.AMP1, P.AMP2 or P.AMP appears when the
preamp 1, preamp 2 or preamp is set to ON, respec-
tively. (depending on operating frequency band)
Push [P.AMP/ATT] for 1 sec. to set the attenuator
ON.
Push [P.AMP/ATT] momentarily to turn the attenuator
OFF.
•“ATT appears when the attenuator is set to ON.
Noise blanker (p. 50)
Push [NB] to turn the noise blanker ON and OFF.
•“NB appears when the noise blanker is set to ON.
Push [NB] for 1 sec. to enter noise blanker set mode.
Noise reduction (p. 52)
Push [NR] to turn the noise reduction ON and OFF.
Rotate [NR] control to adjust the noise reduction level.
•“NR appears when the noise reduction is set to ON.
Auto notch lter (p. 52)
Push [A/NOTCH] to turn the auto or manual
notch lter ON and OFF.
Rotate [NOTCH] control to set the attenuating fre-
quency for manual notch operation.
IF shift (p. 51)
Rotate [TWIN PBT] controls (inner only).
Push [PBTC] to clear the settings.
AGC (auto gain control) (p. 48)
While M1 is selected with [MENU], push [F1
AGC] several times to select AGC F, AGC M,
AGC S or AGC OFF.
VSC (voice squelch control) (p. 53)
While M2 is selected with [MENU], push
[F5 VSC] to turn the VSC function ON and OFF.
The VSC indicator appears when the voice squelch
function is set to ON.
DD
Convenient functions for transmit
Speech compressor (p. 57)
While M1 is selected with [MENU], push [F3
CMP] to turn the speech compressor ON and
OFF.
•“COMP appears when the speech compressor is set
to ON.
VOX (voice operated transmit) (p. 54)
Push [VOX/BK-IN] to turn the VOX function ON
and OFF.
•“VOX appears when the VOX function is set to ON.
Transmit quality monitor (p. 56)
Push [MONITOR] to turn the monitor function ON
and OFF.
•“MONI appears when the monitor function is set to
ON.
Audio tone control (p. 88)
While M2 is selected with [MENU], push [F4
TCN], select an item with [F1 ] and [F2 ] then
rotate the tuning dial to adjust the audio tone.
IC-7400.qxd 02.4.2 11:35 Page 40
53

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Icom-IC-7400

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-7400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-7400 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info