12346
40
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
27
4
RECEIVE AND TRANSMIT
2001 NEW 2001 NEW
Operating CW
q Push a band key to select the desired band.
w Push [CW/RTTY] to select CW.
After CW mode is selected, push [CW/RTTY] for 1 sec.
to toggle between CW and CW-R modes.
e Rotate [AF] to set audio to a comfortable listening
level.
r Rotate the tuning dial to simultaneously tune a de-
sired signal and its side tone.
S-meter indicates received signal strength.
t Push [TRANSMIT] to transmit.
The TX indicator lights red.
y Use the electric keyer or paddle to key your CW sig-
nals.
The Po meter indicates transmitted CW signal strength.
u Adjust CW speed with [KEY SPEED].
i Push [TRANSMIT] to return to receive.
Band keys[TX] indicator[TRANSMIT]
[CW PITCH]
[KEY SPEED]
[CW/RTTY]
Tuning dial
CW or CW-R appears
DD
Convenient functions for receive
Preamp and attenuator (p. 47)
Push [P.AMP/ATT] several times to set the pre-
amp OFF, preamp 1 ON or preamp 2 ON.
•“P.AMP1, P.AMP2 or P.AMP appears when the
preamp 1, preamp 2 or preamp is set to ON, respec-
tively. (depending on operating frequency band)
Push [P.AMP/ATT] for 1 sec. to set the attenuator
ON.
Push [P.AMP/ATT] momentarily to turn the attenuator
OFF.
•“ATT appears when the attenuator is set to ON.
Noise blanker (p. 50)
Push [NB] to turn the noise blanker ON and OFF.
•“NB appears when the noise blanker is set to ON.
Push [NB] for 1 sec. to enter noise blanker set mode.
Noise reduction (p. 52)
Push [NR] to turn the noise reduction ON and
OFF.
Rotate [NR] control to adjust the noise reduction level.
•“NR appears when the noise reduction is set to ON.
Auto notch lter (p. 52)
Push [A/NOTCH] to turn the auto or manual
notch function ON and OFF.
Rotate [NOTCH] control to set the attenuating fre-
quency for manual notch operation.
Twin PBT (passband tuning) (p. 51)
Rotate [TWIN PBT] controls (inner/outer).
Push [PBTC] to clear the settings.
AGC (auto gain control) (p. 48)
While M1 is selected with [MENU], push
[F1 AGC] several times to select AGC F,
AGC M, AGC S or AGC OFF.
1
4 function (p. 21)
While M1 is selected with [MENU], push
[F3 1/4] to turn the
1
4 function ON and OFF.
DD
Convenient functions for transmit
Break-in function (p. 55)
Push [VOX/BK-IN] several times to set the break-
in OFF, semi break-in or full break-in.
•“BK-IN or F BK-IN appears when the semi break-in
or full break-in is set to ON, respectively.
IC-7400.qxd 02.4.2 11:35 Page 27
40

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Icom-IC-7400

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-7400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-7400 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info