23
5
REPEATER OPERATION
■ Subaudible tone
(encoder function)
➀ Select the mode/channel you wish to set the subaudible
tone encoder frequency to, such as VFO mode or mem-
ory/call channel.
➁ Push [SET] one or more times until “T” and “rT” appears
for repeater use; or until “T SQL” and “CT” appears for tone
squelch or pocket beep use.
• Push [MONI] to reverse the order of selection.
• Cancel the DTMF memory encoder function in advance, if nec-
essary. (p. 45)
➂ Rotate the tuning dial to select and set the desired fre-
quency.
➃ Push [V/MHz] to exit set mode.
☞ NOTE: The subaudible tone encoder frequency can be set
in a memory channel temporarily. However, the set con-
tents are cleared once the memory/call mode is selected.
To store the tone frequency permanently, overwrite the
channel information.
The display shows that an
88.5 Hz subaudible tone
frequency is set for re-
peater use.
USING
SET MODE
Ä Set the mode/channel you wish to set the sub-
audible tone encoder frequency to, such as
VFO mode, memory/call channel or scratch pad
memory.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
Å Push [FSET] one or more times until “T” and
“rT” appears for repeater use; or until “T SQL”
and “CT” appears for tone squelch or pocket
beep use.
• Pushing [GENT] reverses the order of selection.
• Cancel the DTMF memory encoder function in ad-
vance, if necessary. (p. 45)
Ç Push [Y] or [Z] to select and set the desired
frequency.
• Pushing and holding [Y] or [Z] changes the fre-
quency continuously.
É Push [ECLR] to exit set mode.
• Subaudible tone frequency list (unit: Hz)
