5
1
PANEL DESCRIPTION
• “d” appears in place of the 100 MHz digit while the DTMF mem-
ory function is in use. (p. 44)
i S/RF INDICATORS
➥ Show the relative signal strength while receiving signals.
(p. 18)
➥ Show the output power while transmitting. (p. 19)
o MEMORY INDICATOR (p.26)
Appears when memory mode is selected.
!0 MEMORY CHANNEL READOUTS
➥ Show the selected memory channel numbers.
➥ A capital “L” appears while the frequency lock function
is in use. (p. 14)
➥ “C” appears while the call channel is selected. (p. 32)
➥ One of “L1” to “L3” appears when a simplex scratch pad
memory is selected. (p. 34)
➥ One of “r1” to “r3” appears when a duplex scratch pad
memory is selected. (p. 34)
➥ A small “c” appears when VFO mode is selected from
the call channel or a scratch pad memory.
!1 SKIP INDICATOR
Appears when the displayed memory channel is specified
as a skip channel. (p. 40)
!2 SWITCH INDICATORS
Indicate the function(s) of the front panel switches directly
below the function display.
!3 OUTPUT POWER INDICATORS (p. 19)
➥ “MID” appears when mid output power is selected.
• The IC-2100T Thailand and IC-2100H Taiwan versions have
no mid output power.
➥ “LOW” appears when low output power is selected
➥ Neither indicator appears when high output power is se-
lected.
!4 NARROW FM MODE INDICATOR
Appears when narrow FM mode is selected (available with
the Europe version only; p. 58).
!5 AUDIO MUTE INDICATOR
Appears when the audio mute function is activated via mi-
crophone control.
• This function is cancelled when any switch or control is operated.