9. Before baking
For a successful baking process, please consider the following factors:
Ingredients
• Take the bread pan out of the housing, before putting in the ingredients.
If ingredients reach the baking area, a fire may be caused by them heating up on the
heating elements.
• Always put the ingredients in the stated order into the bread pan .
• All ingredients should have room temperature to maintain an optimal rising result of
the yeast.
• Measure the ingredients precisely. Even negligible deviations from the quantities
specified in the recipe may affect the baking results.
Note
Never use larger quantities than those specified. Too much dough can rise out
of the bread pan and drop onto the hot heating elements, causing a fire.
10. Baking bread
Preparation
Observe the safety instructions in this manual. Place the bread machine on an even
and firm base.
Note
The bread maker maximum quantities of flour and yeast is 500g(1.0Lb) receips,Don’t
used more ingredients
First add the Water ,oil and other liquids, then add sugar , salt, flour, last add the
yeast .
(1). Pull the bread pan upward out of the appliance.
(2). Push the kneading paddles onto the drive shafts in the bread pan. Make sure they
are firmly in place.
(3). Put the ingredients for your recipe in the stated order into the bread pan. First add
the liquids, sugar and salt, then the flour, adding the yeast as the last ingredient.
Note
Make certain that yeast does not come into contact with salt or liquid.
(4). Place the bread pan back in the appliance. Make sure that it is positioned properly.
(5). Close the appliance lid.
(6). Plug the power plug into the socket. An acoustic signal sounds and the display
indicates the program number and the duration of the normal program 1.
(7). Select your program with the “MENU” button. Each input is confirmed by an
acoustic signal.
(8). Select the color of your bread. The marking on the display shows whether you
have chosen light, medium or dark.
(9). You now have the possibility of setting the finish time of your programme via the
timer function. You can enter a maximum delay of up to 13 hours.
