connectors.
5.3 Charging the Battery
Insert the charger; the flash symbol on the charger plug must face upwards.
Connect the charger to a standard wall outlet and the battery power icon in the up-right
corner of the screen will start scrolling. When the battery bar stops scrolling, the battery
charge is complete. Press the two sides of the charger plug and disconnect the charger
from the phone.
·When the battery charge is low, a "low battery" message will display across the screen
and the battery icon will look empty. If the battery level is insufficient, the phone will turn off
automatically. Do not use your phone under low battery state for an extended period of
time or it may cause battery damage.
5.4 Security Settings
—PIN code
PIN code（Personal Identity Number）prevents unauthorized use of your phone. The PIN
code is provided by your network operator with the SIM card.
If you enter the wrong code three times in a row, the PIN code will be blocked. To unblock
the PIN code, you need to enter your PUK. Your PUK is provided by your network
operator.
－
－－
－Power on Pwd
Activate/Modify/Deactivate Startup password (the length of the password is 4-8 numbers).
If you activate the "Startup password", you need to enter the password each time you turn
the phone on. If you want to modify the Startup password or deactivate it, enter Modify/
Deactivate option to set.
6. Your Phone
6.1 Power On
·Press and hold end key to turn on your phone, light the backlight, and display power on
animation.
·If you do not insert a SIM card, or the SIM card does not work properly, your phone will
show the "Insert SIM" message. In this condition, you can only access part of the menu
and can perform emergency calls.
·If the PIN code is blocked, the alert message asking for PUK code will display on the
screen before power on.
·The phone will search the network automatically after power on.
If your phone registers to network correctly, the name of the network and signal strength
will display; if your phone can’t register or can’t register correctly, you can only access
emergency calls and other functions that do not rely on the network.
6.2 Making a Call
In standby mode, press NUMERIC KEYS to enter dial panel and input dial phone number.
